Help! I get the following message when I try to open links or go to a site...

Help! I get the following message when I try to open a link: Domain not configured This domain points to a Wikimedia Foundation server, but is not configured on this server. Also, whenever I try to refresh a page it takes be back to Wikipedia? Why does that happen and how do I fix it? Thanks!!!

I just tried that and it partially fixed the problem, when I refresh a page it no longer takes me to Wikipedia! Also, I was able to open the link but I am getting the same message as previously when I try to open additional links on that page. This was helpful, thanks. Any other suggestions to why it continues to happen within the link that I was able to open? This other link is a PDF file..

Similar Messages

I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

Adobe Acrobat 8.0
standalone version
Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

Im getting the following message when I try to open iPhoto "iphoto was unable to repair permissioWhat should I do?

I'm trying to move photos from my Iphone to mt macbook. I'm getting the following message when I try to open iPhoto "iphoto was unable to repair permissions for the library." What should I do?

Post in the iPhoto forum area and let the users there know which version of iPhoto you are using.

I get the following message when I try to open firefox 5: TypeError: Components.classes[cid] is undefined. Is there a way to fix this?

as above

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents. Any ideas?

after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?

Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html

IOS updates - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?

IOS error messagge - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?

Which way are you trying to update? WiFi or iTunes? In either case, I would try restarting/rebooting all devices and then try again.
IF you are using iTunes, eject your iPad, quit iTunes, reboot your computer and reset your iPad by holding down on the sleep and home buttons until the Apple logo appears on the screen. After the iPad starts up, connect to iTunes and try again. You may also want to disable your firewall and antivirus software when you try to update using iTunes. Sometimes those will interfere with the download.
If you are using WiFi, reset the iPad as described above and try again.
If WiFi updating will not work, try using iTunes, if iTunes will not work, try using WiFi.

I keep getting the following message when I try to install firefox.."your computer must be restarted to complete a previous install of firefox" I've restarted numerous times..keep getting the same message

I keep getting the following message when I try to install firefox.."your computer must be restarted to complete a previous install of firefox" I've restarted numerous times..keep getting the same message

Have a look at the solution to a similar problem: https://support.mozilla.org/en-US/questions/921375?s=%22Your+computer+must+be+restarted+to+complete+a+previous+upgrade+of+Firefox.+Do+you+want+to+reboot+now%3F%22&r=0&e=sph&as=s
If that doesn't work, you can uninstall FF and do a clean install. You'll prob lose your bookmarks, history, etc, though, so if you do this set up Sync first! https://support.mozilla.org/en-US/kb/what-firefox-sync-and-how-do-i-use-it

I get the following message whenever I try to open FireFox

"microsoft (C) Register Server has stopped working"
Hi there.
Out of nothing I get the following message whenever I try to open FireFox :
"'''microsoft (C) Register Server has stopped working'''"
Internet Explorer won't open either, but it doesn't give a pop-up or anything, it just pretends I didn't open it.
The only way I can open a browser now is by running it as 'administrator'
I've taken the following steps, none of which have had any effect
- tried the DEP on trick in windows system
- Fully updated win 7
- Re-installed Firefox
- reboot, reboot, reboot
- searched online for solutions
but..... :(

ooh my G#D !!! Norton is Best ! thank all you guys ! ;) im install norton anti virus and my fire fox is workin after scan!!! :))) huuuuurrrrrrraaaaaaaaaaaaaaa

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree to end license agreement & Quit & relauch browser. I've done this.over & over. Now what?

Test Screen Name wrote:
When you launch Adobe Reader you should get the license agreement.
- Do you get the license agreement?
When you launch Adobe Reader you should NEVER get a message that it is already installed. That would mean you were trying to install it. NOT launch it.
I agree.
Installer:
Application:
If you're launching the first one... you're trying to reinstall it.

Getting the following message when I try and update my .dwt "sharing violation".

Hi all,
I am receiving the following message whenever I try to update a .dwt for one of my sites. "A sharing violation occured while accessing C:\websitename\templates\index.dwt". I never have gottent this before, the only thing that has changed is that I reinstalled DW on a different machine.
Any help is greatly appreciated.

Sorry all, I shut my machine down and restarted and the message stopped. Closing this discussion .. thank you.

I get the following message when I try to access websites in emails: Could not be locatged in the dynamic link library js3250dll This is VERY irritating. How to disable Firefox or fix the problem

In my email when I click on a website or link the following message pops up:
Could not be located in the dynamic link library js3250dll
Thus, I cannot pull up anything.
When I click on the Firefox browser, I get a message that the entry point is not found.

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

TS3899 I get the following message when I try to send email from my IPAD, "a copy has been placed in your outbox, " it tells me I have exceeded my storage limit. How can I rectify this. The account works fine on the IMAC just not on the IPAD?

When I try to send an email from my iCloud account on my IPAD I get the message that a copy has been saved to outbox as my storage limit has been reached. It works fine on the main computer but not on the ipad. How can I mend this?

I have just encountered exactly the same issue for the last 24 hrs - mail goes to outbox from iPad yet send OK from icloud account on my powerbook. Tried resetting the push email settings on the iPad but no chnage.

Help! I get the following message when I try to open links or go to a site...

Similar Messages

Maybe you are looking for