Help!!! I have 3 kids with new 60gb ipods, I can't install itunes.

I had all three of my kids set up with their new ipods with music on them. We had a virus on our new computer and I had to restore my system to a point before i had done anything with the ipods/itunes. Now i'm unable to install anything. I keep getting a message that itunes has encountered a problem and must close.my kids are driving me crazy, they want to download music NOW. if anyone can help me please hurry!!!

It isn't launching. My norton has been expired for almost a year now. I have tried several times to uninstall and reinstall itunes. I keep getting the same error message whenever I try to open the program. It says " iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."

Similar Messages

  • Hi, I have a computor running Windows 8 and can't install ITunes, it comes up with the error' The error message is'this installation package cannot be opened, verify that the package exists and that you can access it or contact the app vendor.

    Itunes installation error

    Start by clearing your browser's cache and then get a clean download of the iTunes installer. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links. Review the rest of the tip if needed.
    tt2

  • HT5622 I have kids with iPod and iPad. Should I have one apple ID for the family?

    I have an iTunes account and an iPhone. I have kids with iPad and iPods.  Should I keep the family on a single apple ID? 

    Yes usse the same ID. However, they will need their own email addresses for FaceTime and Messages
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • New Version of Quicktime installed. Can't install iTunes 9.01

    I am trying to install the new version of iTunes but its telling me I already have the newest version of quicktime and can not install itunes. Can I just install itunes without quicktime?

    Quit ranting. I am running QT 7.6.4 and iTunes 9.1.1 on my Tiger iMac. It will be ten years old this summer. I have all of you beat I use it to sync a brand new iPod Touch. It works fine, even though it was built prior to even the beta version of OS X.
    corpho wrote:
    My computer was built a mere three years ago and it's virtually useless ...
    Virtually useless? Really? Perhaps you're exaggerating a wee bit ?
    I've spent almost nothing keeping mine up to date. Until someone can provide a tangible reason to update to Snow Leopard, I have no plans to replace this ten year old computer.
    Here are Apple's download sites for QuickTime and iTunes, respectively.
    http://support.apple.com/downloads/#quicktime
    http://www.apple.com/itunes/download/
    They'll install and run fine on your three year old dinosaur of an iMac (geez!).
    I'm reasonably sure Software Update alerted me to the QuickTime update. It was at least several months ago. Perhaps sometime subsequent to that I became unceremoniously dumped by Apple Support. After only ten years. Imagine!
    Virtually useless? Wow. Kids today, I swear...

  • Hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,but i can't find  my data which i have saved on mac.please help me out in this matter.

    hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,
    but i can't find  my data which i have saved on mac.the storage is showing data used and free space on the disk
    please help me out in this matter.

    How did you change your user name?
    resetpassword wouldn't have done it. If you managed to create a new user, then your data is still in the old account.

  • I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

  • My big old IPod is stuff with an error stating Disk mode at top with a big check  mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

    My big old IPod is stuff with an error stating Disk mode at top with a big check  mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • New 60GB iPod won't update my Library of Music

    Hello
    Just purchased a new 60gb iPod with video, hooked it up to my eMac via the very slow USB cable (provided). The iPod mounts onto my desktop, then after just 2 song imports, I get the following error msg, despite me not touching the iPod or cable:
    "DEVICE REMOVAL: The device you removed was not properly put away. Data might have been lost or damaged. Before you unplug your device, you must first select its icon in the Finder and choose Eject from the File menu."
    I tried another cable but got the same error. I have over 16gb of music to load onto my new iPod, any thoughts how to resolve the issue. My old 2nd generation iPod is looking very attractive at the moment.
    Thanks!
    NOTE: I've updated my iTunes to the latest version.
    eMac (combo), 12-inch PowerBook G4; 60gb iPod 5th gen   Mac OS X (10.4.3)  

    You cable isn't slow but your USB ports are. The eMac has USB 1.1 ports, USB 2 which is considerably faster is recommended for the iPod Video.
    Mac System Requirements
    • Built-in USB port (USB 2.0 recommended)
    • Mac OS X v10.3.9 or later
    • iTunes 6 (included) or later

  • The disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod

    the disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod. how do i sort this out?

    - Verify the file and disk formats on your camcorder and on your friend computer whether they support what you want to do. Also, if you are using a specific application to do the task, you may need to verify an application whether it supports the file format (e.g. MPEG4, Apple Intermediate Codec).
    - Verify the device cable type whether Mac OS X 10.4.x supports.
    - Verify the device compatibility with Mac OS X 10.4.x.
    - Check an available firmware or driver for the camcorder that has developed after Mac OS X 10.4.4.
    - Try diagnosing and repairing local hard disk and camcorder's drive directory.
    - Verify disks permissions issue.
    - Verify whether the disk is TOO warm or cold to read.
    - If every troubleshooting does not solve the issue, consider to reformat the camcorder drive.
    You may try suggestions by Dale Weisshaar: http://discussions.apple.com/thread.jspa?messageID=1206250

  • I have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    i have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    Hi tizac,
    You will want to add them to your Contacts. 
    There's a "+" button at the bottom of the contact list on the left to add a contact.
    If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
    Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
    Send Message               FaceTime
    Share Contact             Add to Favorites
    Of course choose "Send Message" to send an iMessage to them and you will start a new chat.  You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
    ivan

  • Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

    hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

    iPhone: Transferring information from your current iPhone to a new iPhone

  • I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? How?

    I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? If so< how?

    1. Go to the following website and download the last version of Lightroom 4:Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1
    2. Run the installation package to install Lightroom.
    3. Use your existing serial number to activate the program.

  • Hello.can anyone help me plz i have problem with my macbook air i can't find image capture.

    hello.can anyone help me plz i have problem with my macbook air i can't find image capture. there is nothing in progrem can i reinstall that progrem and how?thanks

    If you can't find it in your applications folder you will need to reinstall your Mac OS X. Take a look at this link, https://discussions.apple.com/message/16478873#16478873

  • I can't install iTunes 10 on mac os x; therefore, I can't sync new iPod devices with my old iTunes version 9?

    I can't install iTunes 10 on mac os x; therefore, I can't sync new iPod devices with my old iTunes version 9?

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • I have a brand new Macbook Air with latest Mountain Lion but can't install Adobe Flash Player it continually times out?

    I have latest version of Mountain Lion on brand new MacBook Air but can't install Adobe Flash Player from Adobe website as it always times out with error message...?

    OK...I have tried to download from:
    get.adobe.com/flashplayer/
    It tells me that the Adobe Flash Player is version 11.5.502.146
    Intel based Macs
    Browser: Safari, Firefox, Opera
    I click Download now (I don't have any antivirus software running or a firewall)
    The screen then changes to say:
    Thankyou your download will commence immediately...
    Then I get a nes screen with message:
    Request Timeout
    The server timed out while waiting for the browser's request.
    Reference #2.c29aef50.1359298991.0
    I have also tried installing a differnt version by clicking on the "Different operating system or browser?'' and
    selecting
    Mac OS X 10.6 - 10.8
    Flash Player 11 for Mac OS X 10.6 - 10.8
    The same thing then happens...Thank you. Your download will start immediately...then about 20 secs later
    Request Timeout.
    Reference #2.c29aef50.1359299497.0
    That's as much as I know...

Maybe you are looking for

  • What are the buttons in the upper right of the screen for? (when horizontal and while there is an email open)

    Please help me with this question.. While viewing an email I pressed on of those buttons by accident and the email I was viewing seems to have moved into some folder but I don't know which and I can't find it when I search both for the email and the

  • View with two users schema

    hello, i try to create view from 2 users schema , but i get : SQL Command: CREATE OR REPLACE FORCE Failed: Warning: הביצוע הושלם עם אזהרה if i run the select statement without the first line ( create or replace... ) i see the data i ask for... how i

  • New purchase won't synch with iPad!

    I have the latest iTunes software running on the family Windows 7 Home Premium X64 desktop.  It is connected to my no-longer-updateable iPad 1 running the latest version of iOs available via USB cable.  I download all episodes of a recent purchase of

  • Table footnotes in columns

    Apologies if this has been asked before. I have some wide tables which are displayed in landscape, in rotated pages whose text frames have been rotated back so the table is editable. There are also some table footnotes, so they extend right across th

  • Err in Service Call

    I am seeing this error message in my Default Trace file: Exception ID:11:33_18/09/08_0003_568411850 [EXCEPTION] com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component Component : PRTSystem.ErrorCompone