Help. I have my Canon Rebel set to raw but when I download to elements 11 it shows as JPEG.

Ia my Elements set wrong or could I have some other camera setting set wrong. I shoot using only AV..

I use Lightroom, but I know there are a lot of settings on how the program imports files. I NEVER use the automated import popup windows, because i like to control where stuff goes an wha gets done to stuff in a simple way I first create a file folder on a hard drive to take the download, and then I plug the SD card into the card reader on my computer and from "MY COMPUTER" I drag and drop the image files from the card to the folder. When it is done I manually go into Lightroom and Import the files in the folder to Lightroom.
There are a lot of things you could have Lightroom set to do automatically, including (I think) converting them all automatically to Jpg, possibly by accident, especially if you are using a "helpful" popup prompt asking how (and with what program) you want to import photos. If you are unknowingly using some Microsoft program to open or import the images it could be doing something weird too?
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Similar Messages

I HAVE A I MAC WITH MOUNTAIN LION BUT WHEN I DOWNLOAD MAVERICKS ALL STAR GOING BAD AND RIOGTH NOW THE COMPUTER DOESNT START I AM **** UP HOW CAN RESTORE MY ORIGINAL OS LION MOUNTINE

I HAVE A I MAC WITH MOUNTAIN LION BUT WHEN I DOWNLOAD MAVERICKS ALL STAR GOING BAD AND RIGTH NOW THE COMPUTER DOESNT START I AM **** UP HOW CAN RESTORE MY ORIGINAL OS LION MOUNTINE.
OR WHAT CAN I DO TO RESTORE MY COMPUTER THERE IS A LOT INFORMATION THERE WHY MAVERICKS IS TROUBLESHOOTING.

Don't post in all caps. Besides being more difficult to read it's tantamount to shouting and is considered rude in forums. What problems are you having? What model Mac do you have, how much RAM and free space on the boot drive?
Boot into the Recovery volume (boot with the Command + R keys held down) and try the following in order as needed:
1 - select Disk Utility and repair both the disk and disk permissions. Reboot normally.
2 - reinstall the Mavericks system.
OT

I have a fourth generation i pod touch but when i download games it says i need 4.3 how do I get it. How can I tell what mine is

I have a fourth generation i pod touch. When i download games it says i need 4.3. I was wondering what it was talking about and how I can tell which operating system which I am guessing is the 4.3.
I would also like to say thank you for taking your time to answer me and thank you for answers

Connect your iPod touch to your computer and launch iTunes. You'll most likely be prompted to update to the latest version of iOS. If not, click the "update" button. For more information and full details, see the section titled "Update your device using iTunes" in this support article:
http://support.apple.com/kb/HT4623
You should read this article as well:
http://support.apple.com/kb/HT4972
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I have my home page set up fine, but when i open a new tab it loads "delta serach" instead of the old layout of my most visited pages.

something has reset my new tab page to delta search, i want the original layout back with the page thumbnails of most visited pages that i had before. please help. very annoyed at delta for taking liberties in my browser settings.

Type about:config in URL
*Search browser.startup.homepage and change the value to google.com
*Search browser.newtab.url and change the value to about:newtab
*Uninstall the delta search from Extension/Toolbar
In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

Please help me reset my canon Rebel T5 1200D to factory defaults. I do not have tools #3

Please help me reset my canon Rebel T5 1200D to factory defaults. I do not have tools #3

Hi Vicki214!
Welcome to the Canon Forum.
Some menu options are not available when the camera is set to the Full Auto mode. Turn the Mode Dial to P, Tv, Av or M, then search for the option you are looking for in the menu.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a Canon Rebel T3i and I need to tether into my Macbook Pro. How can I do that?

I have a Canon Rebel T3i and I need to tether into my Macbook Pro. How can I do that? I updated my iPhoto to recongize my camera, it does. When connected I see it in the USB utlitiy. But my MacBook Pro says "no camera found." What do I need to do to fix this problem?

Thanks, Kappy
I was fooling around with Lightroom and it has a tethering option. I tried it and it worked. But I am still reading my camera manual as you recommeded.
Thnaks,
JR

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

I have a canon rebel t3, i dropped it and the battery door fell out. Is it possible for it to work

So basically I have a canon rebel t3, I recently dropped it(not that hard) and the battery/memory door broke of. I put it back and it worked except I don't think it 100 percent worked. My camera haven't been working since that day. I'm not sure if ive seen the camera battery door inside the battery I can see the inside to where you connect the door kind of chipped. I tried to put it back in and unexspectdly the little part of the camera's battery door chipped. Is there any possible way for the camera to work without the battery door? will i have to get it repaired at a store for money? can there be any home-treatment i could do? THANKs

Sorry! But it needs to be reapired by a service center. There may be other issues inside you are not seeing right now and in the long run it will never be dependable until it is checked out. Caneras don't like being droped, even a little, and they don't like being wet. Two, no-no's.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

I have a Canon Rebel t5i and a mac - will I have to convert the files from my camera before being able to edit in Premiere Elements?

What version of P-Elements, and what codec does the camera produce?

So if I have my Canon 70D set to sync with the iPhone ...

So if I have my Canon 70D set to sync with the iPhone, you're saying it also will sync with the iPad? What application would I have open on the iPad to accept the wifi transfer of photos, since there is no Canon remote app for the iPad?

Hi...
If you delete the backups it will not delete any content from their device, however the data will be removed from iCloud.
It will also prevent the devices from backing up to iCloud in future, unless this is re-enabled.

I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8

I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.

I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.

HT4061 Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT3529 I have just bought an iPad I have typed in email addresses into Contacts, but when I try to send a message most of them come up within red with an !. Then it will not let me send! This is sapping my confidence ! Please help if possible!

I have typed in email addresses into Contacts, but when I try to do an email, most of them have an exclamation mark and won't let me send! Where am I going wrong ? It is really sapping my confidence!

Did you set up your email account info in Settings?
Settings > Mail, Contacts, Calendar > Accounts > your account should be listed in there with the appropriate incoming and outgoing mail servers and correct user names and passwords.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode?

Help. I have my Canon Rebel set to raw but when I download to elements 11 it shows as JPEG.

Similar Messages

Maybe you are looking for