Help! I have NO playback controls on my project/program monitor

Since the last "Update" to Premiere Pro CC, I no longer have any controls for playback.
Can anyone help me here? I have two major movies to finish this week! Thanks for any help, photo attached. CT

There's a button editor in the lower right corner of the monitor which will let you add certain controls back, but the shuttle/jog controllers that you may be used to from previous versions was removed around CS6. You just need to use JKL keyboard shortcuts for that now (or you can remap them to different keys if you want). It's a bit strange at first but then a lot easier, IMO, once you get used to it.

Similar Messages

Help- I have no idea how to use this program.

Hi All,
I am really at a loss at the moment. I am hoping to create a flash document for work in order to present an idea I have. What I am basically wanting to do is to create an interactive workbook for clients on occupational health and safety.
The problem is, I can visualise what I want but just cannot work out this programme (i mean to the extent I don't even know how to pull in the documents I want) let alone make it interactive.
I know this is a long shot but is there anyone willing to help me get started with this???
Thanks,
Tianna

check flashbuilder. it's a program that's easier to use than flash pro and which you can use to create swf projects, too.

Playback Controls Do Not Function

I have created movies that have the playback control located
at the bottom center of the movie. I have published the movie in
both SWF and HTM formats. Usually, the forward, rewind, pause, etc.
buttons work but the Exit button does not work.
Does anyone know why it doesn't work? How can I make it work?
I do not know javascript, if you are going there. I am not a
developer. I am a software trainer struggling to make a
demonstration movie work. Any help would be greatly appreciated.
Please help quickly! I am in a bind!

Hi Susan
Here is one thing to try. It may or may not work, but may be
worth a shot.
Insert the following code:
JavaScript:var
pw=window.parent;pw.opener=window.self;pw.close();
Where?
* Insert > Button
or
* Insert > Click box
or
* Movie > Preferences > Start and end tab > Movie
End Options.
Configure "Execute JavaScript" as the action.
Click the ellipsis (...) button to produce another dialog.
Paste code from above into the dialog.
Click OK to dismiss the dialog.
Click OK to dismiss the properties or preferences dialog.
Publish and test the movie.
Cheers... Rick

Playback control actions

Hi there - can anyone help me with the playback control is
captivate.
I have a captivate demo that i am loading into a flash movie,
via an empty movie clip on the flash time line, with a loadMovie
command in flash. What i want to be able to do is to create either
a javascript command, or some kind of action that will , upon
pressing the close button in the captivate move - a) close the
captivate swf, b) send the flash movie to a certain frame in the
timeline, and play.
I have tried importing the captivate demo into Flash 8 - the
results are dissapointing as you lose the caption fades, mouse
movements, and strangely, the alignment of the text in the caption
boxes. I would liek to keep the smoothness of the .swf from
captivate, but also have the movie close upon the user pressing the
close button.
Thanks

I don't know how to solve this, but imagine the issue is
this:
The Lectora controls likely suppose the SWF is one long
timeline.
Captivate SWFs are movie clips in movieclips with all sorts
of layering.
So that's likely why the Lectora controls don't work...on the
other
hand, I've never used Lectora so maybe you can specify the
object
relationship they're trying to control.
The question about the audio is likely related to how an
'event' audio
clip will not stop when the timeline is stopped and will
likely run out
of sync. A 'streamed' audio clip will work as you expect. I
don't know
how CP publishes the audio, but would assume 'stream'.
Best solution, unless Lectora can help, is to NOT use Lectora
controls
on the CP SWF but use the CP controls (skin) that are
published with the
CP SWF by default... ?
Erik
MrsZev wrote:
> I'm trying to publish my Captivate demos (just the swfs)
to Lectora 2007, and
> use Lectora actions to control the playback
(specifically, to stop them when
> the Lectora action is executed).
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Playback Control placement

Forgive me if this is a silly question, but I'm a newbie.
Is there any way to place playback controls somewhere other
than the preset options? I'd like to have my playback controls
"float" over my screen so that they are near the caption box.

Hello fahzzy,
No sorry, you cannot float playback controls in Captivate. If
you own Flash and understand ActionScript code then you might be
able to create a custom playback control that can float over you
screen. As a starting point you might like to refer to the Flash
Playback Controls which can be located via the following path -
C:\Program Files\Adobe\Adobe Captivate
2\Templates\PlaybackFLA
Regards,
Mark

Program monitor during playback in always in focus; preventing effects panel or mixer to be seen

Dear Premiere CC users:
It must have been some recent update for premiere pro (a "bug fixes" one), which changed how Premiere works now.
I use 2 monitors where one is full screen preview, and another is for whole application. On that second monitor I used to have workspace organized in a way that NO program monitor was shown. I used to have effect panel / audio mixer + project files + effect controls always shown. Source monitor was triggered when I doubleclicked a clip, program monitor I had always hidden behind, because I have another full screen monitor for program.
Now when I playback program monitor is instantly pulled in front and I cant have mixer engaged, or any other windows in same panel. If I close the program monitor I loose picture on fullscreen monitor too. I don't want to see program monitor in my primary display where premiere GUI sits; only on external display, on second display. But from some update on, this is not possible anymoore.
Now if I want to have external full screen preview, a regular program monitor is always visible too. It is not needed, annoying, and it takes space on GUI area for other frequent needed things; like effects, or mixer. Shure it is good option to have it on a small laptop lcd, but annoying on a 2 big LCD setup.
Does anybody know how to change this back?
Many thanks for opinions or help.
PS: Right now I'm using a workaround: I pulled program monitor from main panel, and put it in panel with volume meter and reduced it's size to 1 x 1 cm - so It is almost invisible and does not steal too much my GUI real estate. But It seems that I have less smooth playback on external display now when program is played back on 2 screens simultaneously, than before.
MIHAEL

I worked with almost all major big NLE products, and once I was hired at local studio with Premiere 6.0/6.5. It was nightmare compared to big ones from that time. But I personaly use and love Premiere PRO from version 1 (e.g. Premiere 7) on. I have tons of stories of broken projects on so many ways. So custom workspaces are jus a drop in to the ocean. As I love it, I cant admire some very old programming solution on what Premiere is based on. But regardles I lasted with Adobe for longer than decade now.
I live with all errors and fight with them by backuping projects in hundred of instances and with splitting project on smaller blocks - e.g. intro, reception, wedding, first dance... I always export finished part of feature in several needed formats and save whole project via "project manager" too. Than I have backup of all that of at least 2 times (3 for projects). I always save original files from camera too.
Regarding updates: We are not used from Adobe to have ANY updates or bug fixes to their products before just new wersion was released. We cursed that hundreds of times. Now they update more than Microsoft. And we are unhappy of that either.
Just today I learned, that some update might change the behaviour of marker placement with "*" on timeline... weird. Sometimes markers are added as clip markers, sometimes as timeline - as I was used to. I must dig into it...
regards.
MIHAEL

No audio playback of MPEG-2 muxed program streams made with Compressor?

Is anyone else experiencing this?
Any fix? Audio plays in VLC so its not operator error..
Upgraded to QT 7.6.6 (1632) and no longer No have audio playback of MPEG-2 muxed program streams made with Compressor?
This machine played audio out of QT with these files prior to upgrade this afternoon.

I've never run a component conflict test is there a tool for that or is this a command in terminal?
There may still be some "tools" around to help with the process but you still have to run playback tests yourself and evaluate the results. The process is quite simple. You just need to "hide" one or more components, open the QT Player, and play a file to see if it is now working correctly. If it isn't, then continue "hiding" additional components. If the file does play correctly, then you have found a conflict and can start "unhiding" components to determine which one (or combination of components) is causing the problem by removing any "problem" components to an external location such as your desktop. Just remember to close the QT Player after each playback test. This is required (or at least used to be required) for the regeneration a new list of components available for use.
I used the term "hide" above since I simply keep a "Disable" folder handy in my Library QT Component folder for just such tests. Placing a component or set of components into the folder temporarily "hides" it from the QT Player when it next generates a list of the components available for use. Specific strategies vary. I sometimes use use a binary tree approach to hide the components (I.e., "hide" half of the components instead of one at a time.) Unfortunately, I don't know exactly how this works with regard to QT X. So, I would likely run such tests in the QT 7 Player. So far, when everything is working correctly in QT 7 Player, QT X seems to be able to play the same file(s) in QT X via the 32-bit switching process.

How do I add playback control to a .swf file in Director 11.5 (PLEASE HELP!)

Hi,
I am currently trying to add controls (play/stop/etc) to a .swf file within Director 11.5. The movie imports fine and plays perfectly, however there does seems to be built in options to add the control in the same way you would for a .mov.
The .swf file has been created with controls and plays outside of director fine. When it is placed into director the controls disappear and leave a white space.
Is there a step by step guide somewhere or can someone give me a step by step guide? I'm fairly new to director and won't know some of the terms etc....
The movie is 30 mins long and requires the user to move to various points and pause the playback. I cannot change the format of the file either.
Please let me know if you need any more info...
PLEASE HELP, I have to complete this in 2 days.
W

Probably too late for your project but...
You can do this by using 3 sprites in addition to the SWF. In this example, I've named them "videoPlay", "videoRewind, and "videoStop". The SWF in this case was named "video."
Apply this script to each of the 3 sprites.
property mySprite
on beginSprite me
mySprite = sprite(me.spriteNum)
end
on mouseUp me
case mySprite.name of
    "videoPlay":
      sprite("video").play()
    "videoStop":
      sprite("video").stop()
    "videoRewind":
      sprite("video").stop()
      sprite("video").rewind()
end case
end

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

Why not use an event
Add a While Loop, inside the loop add the Event Sructure.
Now in the event structure selecd the String Controls.value change event to
react
and the new value inside the event that you get,( connect to the String
indicator box.
On Sun, 10 Aug 2003 15:58:47 -0500 (CDT), WiltonFilho wrote:
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

Premiere Pro CC Source and Program Playback Controls not working.. help please.

Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
Mauro

Dear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro

I have downloaded iCloud control panel but when I sign in with my iTunes username and password it say they are valid but I don't have an iCloud account and Iam lost can you help please. John

I have downloaded iCloud control panel but when I sign in with my iTunes username and password it say they are valid but I don’t have an iCloud account and Iam lost can you help please.
John

You are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Playback Control Tab missing! Help!

Hello
I'm using Final Cut Studio 2 (6.0.5) to edit a project that was filmed on the Red Cam. When I import the full res quicktimes into the project and onto the timeline, the playback control tab doesn't have any options for me to change the playback quality, playback frame rate etc. I want to change them to low and half respectively. Going through FCP preferences doesn't seem to alter anything.
Can anyone tell me what I'm doing wrong? It's a brand new Mac Pro we're running with Leopard 10.5.5.
Thanks

Your QTs are requiring a processor intensive play back.
Open one of your media files with QT and hit Command(Apple)+I, what you see in QT inspector window?
Red,
MXF wrapper works with AVID and Premiere.
Without Logging and Transferring its content into QTs MXFs would never get on a FCP timeline.

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

Is There Anyway to have a Playbar on Media when Gloabal Playback Control is Turned Off?

I am adding video (media) to my project and I want the user to be able to have the video controls (play, pause, etc.) available. However, I don't want them available for the entire project as there is branching that needs to be recognized. If I turn on the control just for that slide, the playbar still controls the entire project (the slider can be dragged past the current movie).
I am surprised that there doesn't appear to be any easy solution for this. Does anyone have the way to do it or at least an acceptable workaround?
Thanks.

That's exactly what I want. I am inserting the video by clicking the Media icon. I think it is going in as a slide video. How should I insert it so it's not a slide video? I am using Cp 6.
Thanks.

Help! I have NO playback controls on my project/program monitor

Similar Messages

Maybe you are looking for