HELp! I have the red screen of Death

Hello, i have a Mid 2009 model MacBook Pro that is making me sick, I Cant use it.
can anyone tell me what to do for a red screen that comes on after tilting the screen up right?
Thank you.

You may try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
However I think you have a hardware issue. If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.

Similar Messages

How do I fix the red screen of death issue?

iPad Air, 13 mo. old: working fine yesterday, plugged it in to charge (left it on) and about 8 hrs later I went to use it. When I opened the case, I had the red screen of death. No error messages, can't see any of the icons. just red screen. I finally got it to turn off using the home and off button. turning back on goes right to red screen. Attempted multiple times to restore using iTunes. Each time it gets stuck in "waiting for iPad to respond"? Anyone have a fix?

Hello konagirl64,
It may help to put your iPad into recovery mode prior to restoring.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Cheers,
Allen

My power button is stuck and I have the white screen of death!

Hello and thank you for reading this post, the answer is desperatly needed.
What's the problem?
Okay, a couple of months ago I smashed my iPod 4th Gen screen unfortunatly. I ordered a new screen and decided to fit it last night. Upon powering the iPod only a white screen shows, I was told that I have to hold the power button and the home button for 10 seconds. One day, before the screen was broken, I pushed the power button and it got stuck down and wouldn't come back up so I have always had to use the assistive touch and plug it in whenever I would like to turn it on. Obviously, because the power button is stuck down I cannot hold it down and press the home button to reset the iPod.
Is there another way around this or is there a way to get the power button to come back out?
Thank you
            - Stay Safe

You can't backup the iPod then.
Place the iPod in recovery mode using one of these programs and restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If data is not in the backup then:
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe you can get some info from the restored iPod via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
-iPod touch Deleted Photo Recovery Tips You Should Know

Red screen of death

Ok, so basically today i had my iphone 5s in my friend's food bag, then i took it out and i noticed that my phone had restarted itself for no apparent reason. then it was fine, then later on in the day, i realised that my phone was hot and it was on the apple logo. i didn't know what to do as it just stayed there so i pressed the lock and home button, then i got the blue screen of death. obviously i was freaked out as my phone is only a month or so old. then i've kept trying to reboot it, and now i constantly get the red screen of death, then it will switch back to the apple logo, and this will keep on happening. i cant charge my phone without it turning on, and getting extremly hot. i have tried to restore my iphone through itunes, which i did the first time but this just went back to the apple logo and red screen of death. then i tried to do it a couple times again, then just won't work! i'm honestly really unhappy, and i want to go to the apple store... but if i'm not on insurance am i still able to go it? PLEASE HELP!

The iPhone includes a one year warranty.
Make an appointment at an Apple store if there is one nearby.

I am using an iphone 3Gs and Itunes won't allow me to restore it?!?! help me fix my black screen of death!

Ok, I am trying to restore my iPhone 3Gs to 5.0.1 and when I do, it looks like it is going well until it says that is it preparing to restore, it keeps me stuck at that spinning bar and then after a while it gives me the error 1601 unknown error has occurred. I have tried looking on Google for over 3 hours now trying to find the answer to my problem and sadly I cant find one, I am trying to restore my IPhone because earlier I was playing with it and it ran out of battery and I let it change and walked away form it, I came back 1 hour later and it was still at the boot logo of apple, I waited 2 hours and it did nothing, just stayed with the boot logo. I then put it into DFU mode and it appears in iTunes as in DFU mode and can be restored but like I said above that it just gives me an error. I have looked into Google and tried every way possible and found out that I may have the black screen of death. If you have this problem and found a way other than getting a new iPhone, please contact me on this page because I am not in the mood to buy a new iPhone because this one has an expired warranty.
Also i have tryed all the things in the error support page and nothing works, uninstalled itunes completely and did all that other stuff but still the same problem and i have not found a way to fix this.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this. Anybody have any insight?

I have an iPhone 4 and downloaded all my iTunes music to it. Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

HElp!! Red screen of death!!

I have an iPhone 5s. i was out today and the battery died. I plugged it into the car charger. When it awoke all I could get was the error message that the phone did not shut down properly. i tried holding down the power button, but nothing happened. Now, I have a red screen. What do I do?

Press and hold both the power and the home button for approx 20 seconds
Do you still have warranty on it? You can take it to Apple Store

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck!

I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

OMG that happened to my ipod as well... when i checked to see if there was anything that i could do alsmost everyone would tell me to hold the home and power button until it turned off then turn it back on... it didnt work with my ipod but worked with my friends... hopefully it works with yours. And if not but another one thats what i did and now the other one cracked i guess its just luck

Firefox 4.0 reintroduced RSOD (red screen of death)

APEX 3.2.1 - RSOD
APEX 4.0.1 - ok
RSOD (red screen of death) was visible in a few previous version and its back. you get it in SQL workshop or any code window. any workaround ladies?
Simon

Raids do not really help benchmarks unless you considure hard drive benchmarks. Most games and benchmark proggies load everything they need prior to running. So unless you have a low memory condition that forces the game or benchmark to use the swap file the only place that you would typically see any gain in speed is during the loading of the game or benchmark. That is hard to quantify other than through experience.
Where a raid shines is in file tranfer situations. When you create and save large files such as movies, Reading or copying large files, defragging, or any other massive file effort. Overall the gains can be very small compaired to the rest of what you do with your system. However that is not to belittle what a Raid does. It does give a finer sheen to the overall computers operations and will make sluggish file transfers seem much more bearable overall.

Why is Encore 6.0 giving me the "blue screen of death" when I try to create a menu?

When I purchased my student edition 6.0 (which I love by the way), Encore did not have any of the libraries loaded up on it. After reading some discussions, I downloaded the missing folders.
Now, when I try to create a menu, my computer shuts down and gives me "the blue screen of death" as they call it (a blue screen with white writting, counting up to 100%, and saying Windows is preparing to crash...or something about the hard drive crashing....I can't remember because it goes off the screen so quickly).
I've done this several times - my computer only does this when I try to create a menu in encore, and not in any other part of encore. It hasn't happened in any of the other programs either (Premiere Pro and Audition are the only other programs I have used so far), or any other times I have my laptop.
Because of this, I am not too concerned since it seems Encore is the problem. However, I do not want any other problems to escalade from this either.
Am I doing something wrong? Can someone please help me? I'm working on my Senior Thesis (a video) this year, and I really really cannot afford to have my computer crash on me.
Please and thank you,
Meghin

Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169
-and an Encore fix http://forums.adobe.com/thread/1060443

My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

How do I fix the red screen on Premiere Pro CC 2014?

Past few weeks, Premiere Pro has not been playing some of my video files properly. Here are the computer specs.
Mac Pro (late 2013)
3.5 GHz 6-core Intel Xeon E5
32 GB 1866 MHz DDR3 ECC
AMD FirePro D700 6144 MB
Recorded on:
Canon XF 300
1920x1080
29.97p
MXF files
What is odd is the Premiere file has six different videos apart of a series and only one of the sessions is showing red screens on both the program and source monitor. The other five sessions are fine. The original MXF files run fine, it is only when they are in that certain sequence.
Another variable is this happens on our other Mac Pro late 2013 but it is completely fine on our older machines (Mac Pro early 2008).
How can I fix this issue? I know there have been red screen issues in the past, but Adobe was supposed to have fixed that.

Hello konagirl64,
It may help to put your iPad into recovery mode prior to restoring.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Cheers,
Allen

HELp! I have the red screen of Death

Similar Messages

Maybe you are looking for