Help. I hit 'Restore All' in an old Time Machine backup

I fully realize I made a terrible mistake. I had an iphoto library on my imac that i haven't backed up at all. I was playing around with an old time machine backup and i pressed restore all thinking it would warn me that i was going to overwrite my existing library. well, now i have lost a years worth of photos without having backed them up. my question is, is there anyway to retrieve them? the trash holds nothing. there is no backup save my iphone. when i hook that up it only shows 2 photos. hide already imported photos is NOT checked. i imagine i can pull them off. i'm wondering if they will be the full resolution however. i would like to UNDO the restore first if there is a way. if not i guess i have to do it with the iphone which i'm not sure if it had all the photos from my previous library anyways. please advise and i will love you forever.
mark

Welcome to the Apple Discussions. About the only recourse is to use a file recovery application like SubrosaSoft FileSalvage. You can run it in demo mode to verify that you can recover the photos you want before you have to pay for it.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

  • I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 any solution

    I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after that ..when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 ...any solution to get back to the upgraded mavericks OS????

    Hi, how did you get MavX from 10.5.8, since it requires 10.6.8 to get MavX from Apple's App Store?

  • I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

    I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

    OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
    See #E3 in  Time Machine - Troubleshooting to see and restore from the "old" drive.
    And, you may not want to restore via the Finder; see the blue box in #15 of  Time Machine - Frequently Asked Questions.

  • Restore Files From an Old Time Machine Disk

    Please forgive and send me a link if someone has already answered this but I need to restore files from an old Time Machine Volume to my current desktop.
    How do I do this?

    control-click on TM in the dock and choose "browse other TM disks". choose your old TM backup to browse and restore what you need. also, you can always open your TM drive in finder and copy what you need directly via finder.

  • Can I restore my mac from a Time Machine backup once I have used BootCamp to partition and set up Windows (without erasing all of the Windows content)?

    A few months ago I partitioned my mac using BootCamp and successfully installed Windows and a few Windows-only programs (games).  I never restored my mac from the Time Machine backup and now I would really like all of my files back on my mac.  I am wondering if I insert the osx install disc and restore from Time Machine backup, will that get rid of the partition I made for Windows?  Will the Windows side of my hard drive stay in tact or will everything on that side get erased when I restore the mac side from the Time Machine backup.  It was a HUUUUUUUGE pain to do the BootCamp partition and get everything Windows set up and I would really like to not have to do that all over again.  I just want to make sure that if I insert the mac osx install disc and restore from Time Machine backup it will only affect the Mac partition, NOT the Windows partition.

    Hi,
    Time Machine does not touch your BootCamp Windows.
    It simply said ignores it completely.
    Nonetheless, I am curious as to why you wanna restore a Time Machine backup.
    Usually during partitioning with the BootCamp Assistant in OSX to make the Windows partition your OSX stays intact.
    Regards
    Stefan

  • How to restore, associate, ??? Time Machine backups prior to HD going bad?

    Greetings.  I hope someone can help me. Soon. Real soon!
    So on our office iMac we have an external HD for time machine.
    Last week the HD inside the iMac failed.  I guess it was one that had been identified by Apple as in a bad crop..... so Apple kindly replaced the failed drive.
    But here is my problem:  We were previously running on Mountain Lion.  One of the major apps we use is a Windows app that runs under Parallels.
    When the HD was replaced, the Tech who did the work I guess did not realize we have a Time Machine.  So he put in the new disk and installed Mavericks on it.  He said he recovered as much off the failed disk as possible, but we see nothing from before.
    Anyway, so now the computer's name is different. The OS is different. Only the HD has the same name: Macintosh HD and of course, all the hardware is what we had previously, except the HD.
    So when the computer was put back into service, Time Machine was turned on. :-(
    We had a bear of a time reinstalling Parallels and a newer version of Windows than what we had before.
    We can access the data that was on the old Time Machine backups via the Finder, except the critical information we need from the backups resides in on the virtual C: drive that mounts when that Parallels app [used to] runs.
    If I try to recover or Migrate from the Time Machine drive, the only backup files that are available to me are those that have been made since the HD replacement.
    Is the ANY WAY to turn back the clock to restore from the OLD TM backups?
    I tried using the tmutil associatedisk command in Terminal, but that seems to have not done anything for me either.
    Any assistance or advice would REALLY REALLY be greatly appreciated!

    Have a look at this thread I posted in earlier and the various links in Pondini's excellent Time Machine resource I linked to:
    https://discussions.apple.com/message/20367932#20367932

  • Cannot restore iphoto library correctly from time machine backup

    Hi all,
    Yesterday I had to reinstall my mac with no particular reason. Suddenly the startup screen with the "circle" went on indefinitely for 10+ minutes before shutting down the system. Yes, the power cord was plugged in. No, I didn't manage to start it in safe mode...
    I thought it wouldn't be a big deal since I regularly back up my mac on an external drive by Time Machine. So I reinstalled and restored the system.
    I could log in fine, but here's the catch:
    1) only 3 iPhoto events out of 30 are restored
    2) for all other events I seem to have the thumbnails but not the original or modified files
    3) trying to browse into the Pictures folder shows that:
    - the iPhoto library file does not appear with the usual icon
    - if I examine the package, for all events that don't show up in iPhoto, the event hierarchy (e.g. 2008/eventxyz) exists but the folders are empty in both the "Original" and "Modified" hierarchies
    - same if I click on the same file in ANY of the 4 backups I have on the time machine disk
    By the way TM restored the system to MacOSX 10.5.2 even if I'm sure I had a later version. In fact, I can't open iTunes either because it says the library has been created with a later version of iTunes. But what really worries me is that I can't even find the .JPG original files.
    Can somebody please help? I relied on Time Machine and there's 6 years of memories there...
    Thank you

    I have the same symptom, but as the result of an external hard drive failure. My Time Machine backups from June 2009 - August 2009 contain the iPhoto library. When I restore the iPhoto library (pick any random backup date) I can see the thumbnails or a blank dashed outline of the old photos. When I click on the thumbnail I can get the metadata (photo location, photo date, etc...) but the photos are gone. When I am in iPhoto the lower left corner of the interface shows the library size is 42Gb, but the restored library package is only about 3Gb. My guess is the difference in file size is equal to the size of the original (and modified) files that didnt get backed up. None of my iPhoto library packages in Time Machine are larger than 3Gb.
    I brought my backup drive to the folks at the Genius Bar. They were perplexed. They suggested I bring in my Mac Mini so they could look at the console. I took a look at the console at home and searched for "Time Machine" and found nothing out of the ordinary.
    Not sure why Time Machine would appear to run so smoothly yet selectively not back up my original photos. I can restore everything else from my Time Machine backup to my new external drive just fine.

  • Defrag an old Time Machine backup to save space for archiving?

    I'm aware of all the reasons not to defragment an OSX volume, as well as Time Machine volumes, but hear me out on this one...
    I bought a new iMac and will be starting a brand new Time Machine backup. I would like to keep the old Time Machine backup around just in case I need access to some old files. I will not be adding anything further to this old backup, and I will not be using this old backup to restore any system. I will only be browsing and restoring files from this backup, but only rarely. I have removed (via the Time Machine interface's "Delete all backups of...") a number of large files and unecessary directories to reduce the backup size. I then ran the hdiutil compact command to reclaim free space from the sparsebundle.
    I read, however, that the hdiutil compact command will only delete unused bands of the sparsebundle, and that defragmenting the contents of a sparsebundle will likely produce more "empty" bands that can be removed with another run of compact to further free up space.
    Will it be okay to defragment the sparsebundle under these circumstances?

    I've looked over Pondini's site and it's an awesome resource. I've learned a lot from it over the years. But my specific question isn't answered there.
    The Time Machine software is complex and I understand that there's a lot of things to know to keep it running smoothly. However, my particular situation isn't commonly discussed. In scenarios not involving Time Machine, defragging a sparsebundle before running hdiutil compact is known to help free up more disk space by creating more unused bands within the sparsebundle that can be removed by compact. Makes sense. Why would this affect Time Machine's process? And could it be that it won't cause a problem for a sparsebundle that will only be used to browse and restore files? ... As opposed to a sparsebundle that one intends to continue backing up to? Are there defregmenting options that I should avoid, or be sure to use?

  • What is the correct procedure to follow after restoring a Mac from a Time Machine Backup?

    Hi all,
    I did a Time Machine backup of my entire system (Time Machine Backup 1) before bringing my Macbook Pro to the Apple Store to to have it tested.   After the TM backup I wiped the laptop leaving only the OS (Mountain Lion) on it so that I could determine whether the problems with my system were hardware or software related. The computer passed all tests.
    After bringing my Macbook home I did a fresh intall of all the software and everything worked fine.  At this point I did another Time Machine backup (in the same location as the previous backup) so that if I ever had problems with my system I could revert to this working backup (Time Machine Backup 2.0).  I used my laptop without issue and created a number of new documents.  I did not transfer the documents from the previous time machine backup (Time Machine Backup 1).  As time progressed I did regular Time Machine backups (backups 2.1 etc.) installed a few new pieces of software and started having system issues again. 
    At that point I did another Time Machine backup (in the same location as the previous backups) (Time Machine Backup 3) so that my new documents would be safe.  At this point I could see all of my TM backups in finder.  Then I used Command + R while booting up and restored my system from what I thought was the clean backup (Time Machine Backup 2).  In fact it the TM backup I used was not the correct backup (It was one of the backups between 2.0 and 3 and I needed to go back further).  I was concerned, at this point, because I did not (and still do not) know what type of effect restoring the system from an old Time Machine backup would have on the Time Machine structure going forward  I was unsure whether doing so and having an "old" system backed up might break the structure so I stopped Time Machine from running a new backup. 
    When I attempted to look for one of the older versions of the Time Machine backups I discovered that there were no longer any listings for TM backups in their previous location.  In fact, the only thing I could see was one line in the place where the multiple backups were previously.  I took my laptop and NAS (where the TM backups were stored) to the Apple Store and the "genius" said something about the TM backup being "parsed"?  He also described it as a "broken window" and he "sees the broken glass but has no idea how it broke".  He also said "neither he nor anyone at Apple would be able to assist me" and that I'd have to go to a data recovery place.
    Fortunately I did use a second drive to backup the original system (Backup 1) but I really don't want to lose the files created ater Backup 2 / prior to Backup 3.
    Does anyone know what happened / how I can get my Time Machine backups back without forking out tons of cash?
    thanks
    John
    OS ML 10.8.4, Macbook Pro Retina
    Synology DS412 (time machine backup to a file folder)

    I actually already checked Pondini's and didn't find the answer.  Any other suggestions?
    thanks

  • Cannot restore some files/folders from Time Machine Backup

    When I try and restore files or folders from my Pictures folder, which is a sub folder of my user I get the message "The operation can’t be completed because you don’t have permission to access xxxx". As far as I can tell this has only just started to happen because I've recovered stuff from the folder since I bought the machine in July. Yesterday I deleted an old Time Machine backup folder from the Time Machine disc. This caused empty trash to go berserk - the "files to delete" count went negative and I had to stop/restart the empty trash command about 20 times before it sorted itself out. Maybe this has screwed some permissions somewhere? I have run disc utility and repaied permissions on my hard drive and verified the TM drive. Still no joy. The permissions for Pictures look OK. Anyone any ideas?

    Yesterday I deleted an old Time Machine backup folder from the Time Machine disc. This caused empty trash to go berserk - the "files to delete" count went negative
    Probably you corrupted your Time Machine Backup by manually deleting older backups- that is dangerous.
    See Pondni's advice on how to fix it - Time Machine trouble Shooting
    I hope that helps
    Léonie

  • How can I restore Parental Control Settings from Time Machine Backup?

    I was trying to adjust one of the parental controlled accounts for my child.  I disabled parental controls, rebooted, and re-enabled it.  Now all the settings that I had setup before are gone.  How can I restore Parental Control Settings from Time Machine Backup?

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • Old Time Machine Backup

    OK this is complex so hope u can bear with me...
    I backed up my computer with Time Machine running lion, or maybe snow leapord.
    Now I have a new computer and the old one is gone, and it's running Mountain Lion.
    I'm just trying to get my old data back, but when I go to "browse other time machine backups" my old backup does not appear in the list.
    I've taken this disk to other computers before and accessed my old TM backup, I dunno why it's not working now.
    Migration Assistant I learned does work, however there are a few problems with that...
    First: Migration assistant did not copy my old iWeb site domain file to my new computer, so I'm hoping its still in there somewhere, becuase iCloud deleted my mobile me site by now.
    I also clicked every option therefore now I have two accounts. I DO NOT WANT TWO ACCOUNTS. I have now one with the old time machine backup restore, and one with the new computer account. I want one account, I don't want to have to relogin to have to check my old email box. Not only that the directories of one account are locked an not accessible by another... not good.
    Finnaly Time Machine just popped-up a window asking if I should "integrate" old time machine backups into this computer backup, saying that if I did this the old computer would not be synced with this new time machine backup. Since I don't have the old comptuter that should be fine. However I'm still hoping to find my old website on that disk somewhere, perhaps in a earlier version of the TM backup.
    If I do this "integration" will I be able to now browse my old time machine disk as I was able to before and on other computer's which run lion?
    Thanks.

    OK it's actually called "inherit" it says:
    Would you like this computer to inherit the backup history from "XX" on "X" backup disk?
    3 options
    don't back up now,     Create new backup,    Inherit backup history
    If I click inherit backup history... it will backup my new disk... and hopefully allow me to accesss the older one like i've been trying to do all along...

  • Privilege problem with old Time Machine backup

    There are all kinds of posts about privilage problems, but I can't find my answer.  I did a clean install of Snow Leopard, and now I want to only drag my iTunes library and iPad backup files from my time machine backup onto the computer.  I can access all the files on the backup drive, including MobileSync and my iTunes folder, but when I try to pull them off the drive I get the terrible message "The operation can’t be completed because you don’t have permission to access “MobileSync”."  The sharing & permissions for the folder say "read & write" for my user, and the "Locked" box isn't checked in the Get Info window.  When I click on the settings gear in the Sharing & Permissions window, the "Make me the owner" option is grayed out even after I unlock the options.  I tried resolution for issue 1 here.  And I also tried those terminal commands to no avail.  When I access Time Machine from the dock, all the backups prior to my reinstall are listed, but I can't access them.  Anyone have any other ideas?  This is extremely frustrating.  Note: I am able to copy over files from the backups created after I reinstalled Snow Leopard.
    sudo chflags 0 /Volumes/Volumename
    sudo chown 0:80 /Volumes/Volumename
    sudo chmod 775 /Volumes/Volumename
    sudo chmod -N /Volumes/Volumename

    I personally think that Time Machine is a magical process run by unicorns.
    I just moved from a MacBook Pro to a brand spanking new iMac 27". My iPad just does everything that I need a laptop to do, and an iMac is so much more powerful than a MBP.
    Anyways, I setup my new iMac with the MBP Time Machine backup, as I usually do with new Macs. As I was going to sell my MBP, I was just going to use my 3TB Time Machine drive on my new iMac, thinking that I'd lose 9 months of backups, as I usually do with a new Mac. Except, apparently with Mountain Lion, the unicorns and wizards have decided that the old Time Machine backups are now transferred to the new iMac. So, even though my iMac is only 15 days old, it shows 9 months of backups. Which was a lifesaver, because an important photo got corrupted in the restore process, and I found it in the Wayback Machine.
    Cool stuff.

  • Restore can't find the time machine backup

    I am trying to restore my system from a time machine backup and the Restore option doesn't recognize my time machine backup. Any ideas on how to force it to see it?
    Some background:
    I am running Mountain Lion on a 2008 iMac. About 1 week ago, my internal HD failed. I had the hard drive replaced and then hooked up my external HD time machine back-up to restore my system. I started the computer with the command-R option and selected restore from time machine backup. It recognized the hard drive itself, but when I get to the screen to select the backup, it tells me there are no backups on the selected volume. I have run the repair in Disk Utility and the drive checked out ok. I have since installed Mountain Lion again on the internal drive, but didn't bring any files.
    Also, while the main computer was down I connected the external drive to another computer and used the show hidden files steps to find some files on the time machine backup and copied them to the other computer.
    I don't know if this relates, but I want to share all of the info: Back when the HD originally failed, the computer froze. When my son restarted the computer, it then asked what language he wanted. Then it began a restore process and asked him to select a volume to restore the system to. This is the bad part- He selected a partitioned drive where I had stored some files that didn't fit on the hard drive. It erased that drive and began restoring the system. Of course he didn't tell me about any of this until about 2 hours later, so we lost the contents on that drive. This partitioned drive is the same drive where my time machine backup resides. One partition is the Time Machine backup and the other was external data.
    Any ideas? I know I can manually restore the files, but it would be nice to be able to automatically do it. Also, is there a way to read the excluded list? I found the file that this is on...
    Thanks,

    Inherit a Backup
    Inherit a Backup (2)

  • I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

    I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

    Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

Maybe you are looking for

  • Java is not working with Firefox (but is working with Safari)

    My computer is showing that Java is not enabled via Firefox. When I try to go into Tools/Add-ons, I see that there is no Java plug-in on that list (though I previously had no problem with Java). When I run software update on my Mac, it tells me my so

  • Disable / Turn off Thumbnail / Icon Preview in Finder?

    Can't find any new/recent posts to solve this issue. I want to disable/turn-off the little icon preview in finder. I have to access a lot of images on a server at work. Image files(jpeg, eps, tiff, psd, ai, ect) that are typically 50MB and higher. So

  • Movies vs Video clips

    I've bought video clips from iTunes Mudisc Stores. Some have been downloaded as bonus tracks when I've bought some albums, some have been bought recently as stand-alone videoclips. The issue is that the first kind are "tagged" as movies, the second k

  • SmartView 11.1.2 error when having Accounts dimension in POV

    Hi all, I'm currently facing a strange problem, when using SmartView 11.1.2 with a HFM application. I have the same application with the same metadata once on a 9.3.3 server and once on a 11.1.2 server. When I connect to 9.3.3 select a grid and put t

  • Update Statistics of MKPF

    Hello everybody, Table MKPF Statistics are current (|Changes| < 50 %) New Method EH New Sample Size  ??? I am trying to update the Statistics of MKPF & MSEG table using DB20 but it tells me to give some NEW SAMPLE SIZE. The LAST REFRESH FOR MKPF IS: