Help" I Imported, now Start Times Altered?

I moved my files from my PC to my new Mac using iDisk and a good number of them now start anywhere from 2 to 40+ seconds in. This is very strange to me as I've never used the start times function. Any ideas?
I tried to select all the files and edit the peoperties, but start time is not editable this way.
Any great mystery solvers out there?
Thanks!

This Doug's Script might do it: http://dougscripts.com/itunes/scripts/scripts09.php?page=1#batchtrimtime.
If that one doesn't do it, you could check the site for other scripts.
Diane Wordsmith

Similar Messages

Help - have imported cds few times, most times cannot

have imported cds few times, most times cannot. i have gone through EVERYTHING i can find in help and on the apple website re importing and about my computer model. Nothing has worked. What is strange is that it has worked a few times.
When it works the CD shows in the source list and imports, the majority of times it does not show in the source list.
I have the right s/w drivers and the latest firmware update is not compatible with PBell.
The CD diagnostics says:
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0), BSSTOR (1.0.2.0), PXHELPER (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX/MX 400\GeForce2 MX
IDE\DiskWDCWD400AB-22CMB0_____________________05.04E05, Bus Type ATA, Bus Address [0,0]
IDE\CdRomGoldStarCD-RW_CED-8120B________________2.00___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomNEC_DVD-ROM_DV-5800A___________________1.42___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Q: _NEC DVD-ROM DV-5800A, Rev 1.42
Audio CD in drive.
Could not open CD handler, 32. Problem with installation of drive in Windows or drive contains copy protected CD.
Audio CD reading succeeded.
Get drive speed succeeded.
R: GoldStar CD-RW CED-8120B, Rev 2.00
Audio CD in drive.
Could not open CD handler, 32. Problem with installation of drive in Windows or drive contains copy protected CD.
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8 12.
The drive CDRW speeds are: 2 4 8.

I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.

Factors governing start time in purchase requisitions

Hi,
What are the factors which decides 'Time' in start date of purchase requisition?
I executed heuristics for 1 location-product, there is different time in start date of PRs
Means 1 PR is showing start time as 11.45 and other is showing as 8.45
We are working on SCM 5.0
Thanks for your help!
regards
Yogesh

The start time is governed by
1. requirement time
2. Transport duration in transportation lane.
It is not really governed by planned delivery time.
If my requirement is say 15th June 10.00 am and transport duration in t-lane is 18 hrs, the PR will have end time as 15 June 10.00 am and start time will be 14th June 16.00hrs. (this is if planned delivery time is 4 days or so).
But with same data if requirement is say 5th June 12.00 and planned del time is 4 days. PR will have end time as 7th June 12.00 (because today is 3rd June and you can get the material only after 4 days and you have taken heuristic run at 12.00 hrs today) while the start time will be 18 hrs before that is 6th June 18.00.
In your case two PRs are showing different start time because of different transport durations.
Hope this is clear.
Nitin
Edited by: Nitin Thatte on Jun 3, 2009 7:25 AM

I installed Mountain Lion and now some times when I start my mac it look with a black screen and white text. I'm really worry about it, can somebody help me?

I installed Mountain Lion in my IMac and now, some times, when I start up my mac it looks with a black screen and white text. I'm really worry about it, can somebody help me?

Don't worry, this is probably just Verbose Mode. It's perfectly harmless. If you're not specifically invoking it, than it's probably down to an unwanted setting in NVRAM. See this article on resetting NVRAM if it continues to bother you.

I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Why does the Firefox wecome window open now every time I turn my computer on and start Firefox? It is annoying and I would like it to not do this. thank you. .

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/867496]]</blockquote>
I upgraded to Firefox 6.0 on my desktop and now every time I turn my computer and start Firefox, it opens two windows one is my normal homepage and the other is the Firefox welcome page. I do not need to see the firfox welcome page in a separate window every time I start Firfox. Can you help me fix this? thank you.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/867496]]</blockquote>
I upgraded to Firefox 6.0 on my desktop and now every time I turn my computer and start Firefox, it opens two windows one is my normal homepage and the other is the Firefox welcome page. I do not need to see the firfox welcome page in a separate window every time I start Firfox. Can you help me fix this? thank you.

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

Lets start over...
Please restart the network.. shut down everything..
Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
Does the TC show up in Airport utility? Are you running wireless or ethernet?
If you still have issues.. plug the TC directly into the computer by ethernet.
Do a full factory reset of the TC.. and see if it now shows up.
Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
You take a screen shot of the TC opened in finder.
eg..
My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture.

I'm trying to have the end times shows up when I print my calendar from the month view. As of now, when I print in the monthly view, it only gives me the start time of a meeting.

I would like to have the ending times shown on my monthly calendar. As of now, it only shows the start time. The end times show up on the weekly calendar, but I don't want to print from the weekly view.

Hi,
I see two issues,
1. the url is not correct for the image, www.mountjay.com/Home/MountJayDesign.jpg
2. meta property should go in to head section, at the moment, it is under body (if you insert the code as html). go to page properties-> Metadata-> head. Paste this here, and check the site again,
Please let me know if you have any other query.

I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Kernel panics are usually hardware.
Hold down 'd' key and it should boot into Apple Hardware Test, or insert your OEM install DVD to do so.
No, we are mere users and mortals and usually you need to do some troubleshooting by trial and error and testing. Schedule an appointment.
http://docs.info.apple.com/article.html?artnum=106227
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

I upgraded to itunes 10.7.0.21 and now every time itunes starts it crashes within a few seconds!

I upgraded to itunes 10.7.0.21 and now every time itunes starts it crashes within a few seconds! I have uninstalled and re-installed and I get the same! I am running windows 7 64bit. The error window sais the fault is " KERNELBASE.dll". I also installed on a test PC that has a trail version of Windows Web Server 2008 R2 and the exact same thing happens...
Now I have no PC to sync to and no music/movies.... Any ideads??
Many thanks...

I had the same problem. New iPhone 5, had to install iTunes 10.7 on windows 7 64 bit. The install worked, but it crashed immediatly after startup (no window, nothing.) I tried repairing the install, and still nothing. When I read the post above, I saw that it was Quicktime related, and remembered I was also prompted to upgrade Quicktime too, which I chose NOT to do. So I went back and upgraded quicktime.. and VOILA.. it WORKS. iTunes now runs, and I'm in the middle of restoring my old iPhone to my new one. (fingers crossed)

I updated my itunes and now every time i try to play a song 'internal error' shows up and itunes quits. Please help me....

I updated my itunes and now every time i try to play a song 'internal error' shows up and itunes quits. Please help me....

Hi Dance4Life85!
I have a couple of troubleshooting suggestions for you regarding this issue. First, I would suggest that you reinstall iTunes, according to the instructions in this article:
OS X Mountain Lion: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH11201
To reinstall iTunes, download it from the Apple Downloads website.
Apple Downloads website
Note that all you will need to do is download iTunes and install it again, it will install over the version that is on your computer right now without issue. If your issue persists, you may want to see this article about troubleshooting third-party plugins for iTunes:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
Lastly, if neither of these resolve the issue, then you may need to recreate your iTunes library. More information on this can be found here:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How do you alter the event start time

The event start time always defaults to 5:00 pm. How do I change this.

Thanks for replying. Yes my event time is responding as you pointed out, however I' putting on a number of events at about 4:00 pm that all start about 8:30 am so it would be very useful if the default time could be set for a specific time. Thunderbird is version 31.5.0, I only started using this programme a few days ago and downloaded the Lightening Calendar at that time. Could not find how to find the version of Lightening perhaps you could help there as well. Regards

Events past midnight, now showing up with start time on BOTH days.

If you have an event on one day that goes past midnight, iCal now puts the event on both days with the same start time on both days. How do I stop this and have it only show the start time on the First day (like it did before Mountain Lion)?

Hi -
Thanks for doing that. I clicked on the annotations, nothing happened, was I supposed to see additional stuff or are they just markers? I just see text balloons now.
MDmacuser wrote:
As far as the filter, I am just using the built in filter to FCE.
OK, so you are basically replicating the clip on V1 on V2 and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V2, the rest of V2 has been cropped transparent and is just showing through to V1 below?
OK, click on V3 and type Control - B to temporally hide the clip. Does the effect work for masking the first ID, all through the clip?
Now click on V3 again and type Control - B to re-enable the clip so that it is visible.
So on V3 you replicated the clip on V1 to V3, and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V3, the rest of V3 has been cropped transparent and is just showing through to V1 and V2 below?
If you did it that way - should work.
Let me know if I don't understand what you are doing.
thanks
MtD

Hi, i think i erased the utility folder of my macbook and now every time i try to open it the computer just freezes...? help!

hi, i think i erased the utility folder of my macbook and now every time i try to open it the computer just freezes...? help!

Hi
This sounds like a job for Disk Utility ... but that's located in the Utilities folder ....
Fortunately, there's a spare copy of Disk Utility on the setup disks you should have received with your computer. You need to boot the computer from the setup disk, then find Disk Utility. Inside Disk Utility, "mount" your hard drive and run Repair Disk, then Repair Permissions.
Good luck
Bob

Help" I Imported, now Start Times Altered?

Similar Messages

Maybe you are looking for