Help! I installed Maverick on my MAC yesterday and now I can't open safari

I installed Maverick and now nothing happens when I click on the Safari icon. Can this be fixed?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • HELP! I attempted to erase free space and now I can't open any files!

    Hi everyone! I hope you can help me with my problem.
    Last night, I attempted to erase free space from my HD using disk utility. During the operation, the computer hung, so it wasn't able to complete 'creating temporary file' operation. So i had to stop the operation. And now, I can't open any files! Turns out my HD was full. But prior to my attempt to erase free space, I still had 25GB out of 55GB of free space. What happened? And how do I fix it? A lot of important files are in my HD and I don't want to lose any of it.
    Hope somebody could help me. Thanks a lot!
    allworkedup
    iBook G4 14"   Mac OS X (10.4.6)  

    Hi, Scary isn't it? I did the self same thing. Check your trash, you should see one or more disk images there. Empty the trash. All will be OK thereafter.
    If they're not there, restart and either the system will sort itself out or they will appear in the trash, so empty it.
    See here for my thread on the same subject.
    Good luck,
    Adrian
    Message was edited by Adrian: Oh, and Welcome to Discussions !!

  • HT1848 I synced my on my iPad 2 to my pc yesterday and now I can not open any of my apps on my iPad2, those purchased and those that are free.  All it does if I click on the app is flicker but does not open.  can anyone help?

    I was told I could sync my music on my pc with my ipad2 by an apple agent.  I hooked my ipad2 up to my pc and did so, but now I can not open any of my apps on my ipad2.  when I try it just flickers and does not open.  Can anyone help?

    On you iPad, force close all the Apps in the multitask window.
    Follow these steps to force an app to close:
    From the Home screen, click the Home button twice. 
    Tap and hold on the app. 
    When it starts to jiggle, tap the to close it on by one until all cleared
    Now do a Soft reset of your iPad:
    Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again and see if this resolves the issue.

  • I just installed Mac OSX and now I can't open my documents...

    After installing a new operating system, suggested because I have a new iphone, and i need to back it up, when i go to open a document, it says, "The document "-----" could not be opened."
    Any suggestions?

    Exactly which new OS have you installed?   Please update your profile, your question would make more sense then.   If you have installed Snow Leopard, then you need to update further via the Combo updater 
    Mac OS X 10.6.8 Update Combo v1.1
    Plus software updates to follow.

  • I downloaded an update for safari in my Imac, but it wasn't the good one and now I can't open safari so can't go on the internet, help??!!

    My safari doesn't open anymore and I can't access internet because of that

    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • I saved a Pages doc yesterday and today I can't open it because I get a message that the doc is missing an index.xml file. Help!

    I saved a Pages doc yesterday and today I can't open it because I get a message that says "can't open doc because an index.xml file is missing."  Help!

    Pages v5 documents do not have an internal index.xml file. When you attempt to open one of these with the older Pages '09, you will get that dialog. Double-click the document icon, or right-click, and open with Pages v5 to access the document contents.

  • Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!

    Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!

    Some people have reported reinstalling the Apple 2014-001 Java update has helped.
    See thread 7 here  Illustrator CC 2014 crashes on startup after Yosemite 10.10 upgrade today.

  • I plugged my flash drive into windows and now I can't open the files on my mac. Help??

    I plugged my flash drive into windows and now I can't open the files on my mac. Help??

    What version of iPhoto?
    What format is the disk?

  • I installed Mavericks a few days ago and downloaded all the available updates, which installed correctly (or so it says).  Now I can't open my iPhoto app because it says it's being updated.  Any suggestions?

    I installed Mavericks a few days ago and downloaded all the available updates, which installed correctly (or so it says).  Now I can't open my iPhoto app because it says it's being updated.  Any suggestions?

    There are two ways to recover from this condition.
    1. Select
    Store ▹ View My Account
    from the App Store menu bar, then select View hidden purchases. Stop or resume the download.
    2. Open LaunchPad and find the icon of the app you're trying to install. There will be a small progress bar below it. Click the "X" to stop the download.

  • Bought a new HD for my Mac mini, and now i can not do anything, i press com r and nothing appears, only gray screen and then appears a folder with a ? in it, can anyone help me how to solve this. Thank you

    ought a new HD for my Mac mini, and now i can not do anything, i press com r and nothing appears, only gray screen and then appears a folder with a ? in it, can anyone help me how to solve this. Thank you

    Thank you so much for your attention, it is allready working well.

  • I installed Lion on my MAC book and now want to uninstall it, can't seem to find a way to do it, any suggestions?

    I installed Lion on my MAC book and now want to uninstall it, can't seem to find a way to do it, any suggestions?

    In order to uninstall Lion and "downgrade" your OS, you have to erase your drive. There is no other way. If you have a bootable clone or a Time Machine backup, it is easy - just boot with it, erase the drive, and clone back. Or, do you have your install disks? Boot from that disk, erase the drive and reinstall.
    Make sure you back up your important files first since they will be gone.

  • I just installed iLife on my new Imac version 10.8.2 and now I can't open my iPhoto app.  It says that I Photo is damaged or incomplete.  What do I do to restore my iPhoto and pictures!

    I just installed iLife on my new iMac 10.8.2 version and now I can't open my iPhoto app.  It says it is damaged or incomplete.  What can I do to get it back along with all of my picutures?  I was told by an Apple employee at my one to one training that it was OK to install iLife to get the iDVD that I wanted. Help!

    I have installed iLife a few times and because of photostream, the version on the disc must be updated.  Software update usually takes care of it.  It sounds like you installed an old version over a new version.  I've not tried that.
    You have a late 2012 machine, if you open the Mac app store from the dock, you should be able to go to the purchased tab and download/install the right version of iphoto.  Honestly, you should not have used that disc on this new of mac or at least only installed iDVD & iWeb but not garageband, iphoto, and iMovie.
    If the Mac App Store shows iphoto as installed already, drag the app from your applications folder to the trash and reinstall it again from the Mac App Store.  That is the version you need.  You may find garageband and imovie have similar problems.
    good luck.
    PS.  your photos are in your photo folder in your home folder.  don't touch those, I'm talking about the app "iphoto" in the applications folder.

  • HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

    I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

    Download the iPhoto upgrade from the App Store. It should be free.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • I upgrades my iPAD  3 to iOS6 and now I can't open my Safari RSS bookmarks.  Any ideas to help?

    I upgrades my iPAD  3 to iOS6 and now I can't open my Safari RSS bookmarks.  Any ideas to help?

    I've installed 3 different RSS readers and none of them "grab" the default flag for RSS feeds.
    I've also uninstalled the Podcasts.app, then re-installed a couple of the readers and Safari still has no idea what to do with them.
    What's most annoying is that Safari declares it doesn't know what to do with a feed and offers to load the iTunes Store so I can pick an RSS Reader to install, and then the iTunes app declares it can't connect to the store (even when I'm already on the store or downloading an application at the time).
    And yeah, I've tried the fixes for the cannot connect errors (Date/Time flip, reinstall bought app, setting DNS to Google even though it was already fine, and clearing Safari's cache just in case).
    This is absolutely pathetic.

  • HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    Can you tell us about one or more of the video files - what are they?  QuickTime?  MP4?  Something else?  How did you create the video files in the first place?
    I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files!  I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
    The solution was to (re)install QuickTime 7.  But first look in your Applications > Utilities folder.  When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder.  If it's there, try using QT 7 to play one of your video files.    If QT 7 is not there, you can download and install it from here  Make sure you are running at least OS X 10.6.3 before you install QT 7.  It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard.

Maybe you are looking for

  • How to set billing doc parameter for multiple selection ?????

    Hi all, Output for Billing VF31, SD70AV3A i would like to add ‘Multiple selection’ to the Billing Document parameter.  multiple Currently, it would only give data for one of the documents in the selection. According to me the billing parameter can be

  • TS3899 how do i control or limit the number of email messages in my inbox?

    how do i control or limit the number of email messages in my inbox? i used to be able to pick the number of emails on my phone 100, 500, 1000, or 1500 etc. now all my (new inbox) emails are  coming to me at once. how can i control it? i have went thr

  • Pkcs#11 certificate does not appear with Tomcat / IIS ok

    Hi all, I am trying to use SmartCard client authentication (pkcs#11, JDK 1.5.0_3, SafeSign for Starcos 1.0.9, SCR531 card controller, Tomcat 5.5.12 with clientAuth=true). When I access the protected site, the browser plugin (which is installed by Saf

  • Crawling xmp metadata from pdf's

    We have some PDF files which we are crawling in. These PDF's contain XMP metadata tags. I suspect that the PDF accessor is ignoring these tags. We've tried a number of different proprty mappings all to no avail. Has anyone else had any luck crawlingi

  • Apply System Configuration Settings Broken in SIU

    I'm making a NetRestore image for a small lab with 14 MacBooks.  I want to apply Computer Name and Host Name and ByHost preferences to the clients. I'm building a NetBoot image in System Image Utility using the Apply System Configuration Settings to