HELP! i just put a bunch of cd's on iTunes, and syched my iPod, but...
nothing new is showing up.
i got an error message about windows and a CD..?
something about how my iPod is running with another file, so i opened task manager, and it said the only thing that was running was iTunes.
if anyone can help, i would GREATLY appreciate it!!
thank you so much!
I FIGURED IT OUT!!!!
what i did was plugged my iPod back up, then when iTunes pops up, drag your 'music' section to your iPod. (you have to be in your library, not in the iTunes store)
mine synched automatically, and i had no problem ejecting it or anything.
no error messages either. and all my music is now on my iPod!
thanks to my dad. (: lol. hope this helps someone!
Similar Messages
-
New songs synced to my ipod wont play, the songs play fine on itunes and appear on ipod but wont play..any help appreciated
So, if you select one of these songs on the iPods screen, and try to play it, what happens? The iPod does nothing? It skips to the next song?
It's possible you will have to do a Restore on the iPod, if there is data corruption on the iPod causing this problem. The Restore erases the iPod, and removes any corruption.
NOTE: There may be a hardware problem, such as the iPod's hard drive becoming unreliable, that is causing this problem and data issues. It may continue to operate as long as its data stays mostly unchanged, but if you do a Restore to update the hard drive's data in a major way, it is possible that the Restore will fail and leave the iPod non-operable. -
Please help or I jump of the roof because of new itunes and 30gb video ipod
HI,
I really need help or the headaches this ... ipod (you know what I was going to say so) anyways, I have this nice 30gig ipod video and was really happy with it until today. I tried to upload some new songs on it with the new itunes 7.0 and it gave me the msg "itunes has detected a ipod that is in recovery mode." or something like that, well it told me to restore the ipod. I did that cause I had my files still on the computer. then I waited for the apple logo on the ipod, worked fine. then when it was finished itunes had the same msg again, you need to restore the ipod. After like five times doing that I stopped and thought maybe the new itunes wasn't good so I installed the older 6.0.5 version, but nothing happened it didn't recognize the ipod.I tried to reset it, to restore it with the updater and that made it even worse. I think I started the updater and then the computer restarted in the middle of the restoration.
Now the ipod keeps resetting it and I can't do anything. I tried to let it drain the battery but that didn't help, the pc isn't recognizing it at all.
Now, could someone tell me what the best thing is I could do instead of hitting the **** thing with a hammer?
I am really frustrated and the support page didn't really help nor did I find any telephone number from apple so I hope that at least someone here can help me get my ipod back to work.
Otherwise I really have to hit it with a hammer. Is there the possiblity taht if I take out the battery, that it stops and resets normally and can be used again? If so, could then someone tell me how I do that?
I hope somebody will find the time to help me.
I thank everybody that might have anything to say to this problem in advance
sincerely
Phoenix
5th gen ipod Windows XP 30gb harddriveI feel your pain... I'm having a problem with downloading and installing new software form my 30gb IPod. ITunes 7.01, which I installed on my new computer, will not allow the updated software for the IPod to install or update the IPod. My IPod disappears from the ITunes playlist column as soon as I try to update the software. Apple has a problem with the IPod software update that they have not yet found a solution for. I am unable to update my IPod with a movie that I purchased. I can play it on ITunes, but it will not show up on my IPod. I also lost some other videos that I already had. I'm just waiting for the "Fix" so that I can update.
Dell Dimension 3100 Windows XP -
I have 5th gen iPod classic and although it is recognised by my windows vista software within the "computer" tab. iTunes does not see it. I have totally reset my iPod and reloaded the iTunes software on my PC (which actually sorted my issues with mt 32gb touch) but to no avail.
Any assistance would be grately appreciated?
NNothing has changed frlom when it worked on Saturday to it not working on Sunday! The iPod does not appear in iTunes on either my laptop or my PC. The iPod appears to be fully functional, the wheel works and the date/time etc is all correct. However, it is empty of all music and videos. It was almost full (give or take 10 gb)
The display on the iPod says connected! Is there a setting on it which changes it from an iPod to a disc drive? Other than that, I can see what's wrong.
Everything is working perfectly apart from it's deleted all my stuff and the PC only sees it as an external hard drive?
As I said, my touch is fine -
Help,
i have just put a screen protector on my iphone 4 and where there was something on the film it seems to have eaten into the screen. is there a way to clean these marks off?I wouldn't worry. Assuming you haven't hacked the phone you cannot have installed any viruses or spyware just by clicking a link in an email. Sounds like the page you accessed could not be read on the phone anyway, or it was just a dead link.
-
I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.
Try the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Hi, having old macbook pro intending to upgrade my os from snow leopard to lion but negative reviews on lion just put me off..i have ms office and photo shop installed on my machine..my question is will upgrading to lion stop me using those application? thank you.
htfromgrantown wrote:
Hi, having old macbook pro intending to upgrade my os from snow leopard to lion but negative reviews on lion just put me off..i have ms office and photo shop installed on my machine..my question is will upgrading to lion stop me using those application? thank you.
Negative reviews are common place here as it is a trouble shooting forum. If you want to read the advantages, improvements and new features then go to the Apple site. If you are running Word 2004, Early Adobe suite, etc which are PPC programs, then don't update. Go to Apple logo in upper left menu bar, open About this mac > More Info > Software >Applications and sort by 'Kind' and look what PPC programs you have installed. If you are not prepared to upgrade these programs, then do not update to Lion.
There are plenty of threads to read up on about this here. But remember that 99.9% of comments will be negative, even though the forums represent only a tiny fraction of the Millions of Lion Downloads purchased and installed with no issues at all. So basically it's your call.
Good Luck -
Just put a new hard drive in my IMAC and I bought a lion OS license online so how do i get the software on the imac
You need at least 10.6.7 installed. If that's the case, since you didn't indicate anything, update to 10.6.8, launch the App Store.app in /Applications, and click on the Redeem link.
-
Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!
Bucktr09:
I'm having the exact same problem. I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen. I can get my library content but the store is a no go. Is there any one out there with a solution? -
Help! When I try to purchase a song from iTunes and have agreed to the terms and conditions, it then tells me that my session has timed out... but I've only been trying for a few minutes. I can't buy songs if it keeps doing this! Does anyone know why it's doing this and how to fix it? Thanks!
Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal -
Itunes converrts videos for ipod but then thay have no SOUND!!! Help please
Itunes converrts videos for ipod but then thay have no SOUND!!! Help please
Just bought it a couple of days ago, and its doing this!!! why doed the videos now both on my ipod and itunes not have sound?Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip. -
My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.
Hello kidmango,
I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
It is possible that security software is the culprit. Use this:
iTunes: Troubleshooting security software issues
You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
Hope this helps.
~Julian -
My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,
A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete. -
My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
Can anyone please help?Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy
Maybe you are looking for
-
Oracle BI Office Add-In for Excel (Failed to insert Oracle BI view due to )
Dear all, I receive the following error message when I change the Prompts in Oracle BI Excel Add-In: Failed to insert Oracle BI view due to processing query error. I think it has something to do with the performance of the development database. Is th
-
Material list by "External material group"
gurus I'd like to retrieve materials which has particular "External material group". But in MM60, there is no selection field for "External material group". Other than SAP query, is there any way? Yoshi
-
It is question on portlet pdk struts tags link
hi: <td> <jsp:useBean id="rowEditSet" class="java.util.HashMap"/> <c:set target="${rowEditSet}" property="event" value="setCurrentRowWithKey"/> <c:set target="${rowEditSet}" property="Arg0" value="${Row.rowKeyStr}"/> <pdk-html:link action="/browseCus
-
Every Javascript I try to load always gives me a Coffee Cup with a "!" in the middle of it. I have the latest version of Mac OS and Safari. What can I do?
-
Which technology to use with ADF BC to ensure LUW
Hi all. I'm working for a client and together we developing app in jDev using ADF BC and ADF Faces. App will be deployed as standalone on WLS. We need to reuse some methods from application module to outside world (another java app running on Websphe