Help i just tried to update my sons ex 3gs ive been using with my symm card in with no problems, ive just tride to backup

can anyone advise as help is required.ive just tried to update my sons old iphone 3gs ive been using the last year with no problems,now the screen on itunes is telling me there in no sym card installed allthough it is any ideas this iphone was unlocked for me to use,help im no tecno.

Hi there shogun03,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
-Griff W. 

Similar Messages

  • Trying to update from OS X 10.6.8 operating with zero problems to 10.9.2. Install over current OS results in inability to cold boot to mavericks. Must use option key to select 10.9.2 volume to boot to.

    Will boot from cold start sometimes but eventually will not boot at all. Just white screen. Have tried safe boot and cleaning out folders suggested by Apple care advisor. This helps temporarily. But white screen issue returns. Have removed all periferals problem persists. Have tried reseting Pram. This results in the Mac booting up into 10.6.8. ( I keep a backup clone on a different internal physical drive.) I've tried a clean install using migration assistant to bring over all my stuff. This results in a permissions mess that disk utility cannot fix.) I've tried migrating my data from snow leopard during the install process. Same permissions mess. Snow leopard works great but I'm concerned about lack of support with security updates going forward. I have three macs in the family. Have been a mac user since 2002. Paid the premium because Macs just WORK and I've not had to mess with them to stay alive. Mavericks has changed all that. I want to get past this and go back to just using my Mac. Open to help please. Two other things. In all instances of trying to use Mavericks I cannot get finder to retain my preference settings. They always return to default when I reboot. Microsoft Entourage always opens with a new email draft now instead of just opening to the inbox like under Snow Leopard when started from the dock. When started from applications Entourage opens to the inbox normally. Thanks

    Here is how I solved this issue on my early 2008 Mac Pro- Formatted and  zeroed my boot drive. Disconnected all periferals except monitor (Dell  DVI), wired mac keyboard, Logitech wireless usb 2 mouse. Removed my ATI  5770 upgrade Video card and replaced with original Nvidia card. Did  clean 10.9 install. Immediately updated to 10.9.2. Checked finder  preference retention issues- Gone. Checked reboot and boot after PRAM  reset issue. Still boots back to 10.6.8. Hmmmm though about how the  order of my physical drives in the bays was now different than before  10.9. Previously 10.6 startup was in bay 3 and my 10.6 clones were in  bay 4. Never had a clone boot on startup. Now 10.6 is in bay 2 and 10.9  is in bay 3. Does the mac start looking for a boot volume in bay 1 then  2,3,4. Answer- Yes! When I moved the 10.9 drive to bay 1 kept 10.6 in  bay 2 the crazy start up switch no longer occurs. So, I used the system  like that for a couple of days rebuilding my files and reinstalling  applications. Then I pulled the nVidia card and put the ATi 5770 back  in. All is well. The system works perfectly no more issues. This has  been a lot of work and I can't tell what the specifict conflict was, but  I'm up and running Mavericks with no problems. All my hardware is back  as it was before. All periferals working fine. Glad I am still able to  make use of my ATi video card because it is superior.  Hope this helps  others use mavericks on their older Macs.

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

  • HT201210 I tried to update my sons ipod.  It has the itunes logo with the usb port on the screen.  If I restore I will loose all his games and music.  Is this my only option???  Help !!

    I tried to update my sons ipod.  It has the itunes logo with a usb port on the screen.  If I restore it I will loose all his games and music.  Is there any way around this??  Please Help??

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I am trying to update my sons iPod-.I do have a Mac desktop.But I am not sure how to update his iPod?

    I am trying to update my sons generation 4 iPod…i do know that there is a way to update his iPod to iOS 6.I do have a Mac Desktop.Could someone please help me ??!! Is there a way to hook it up to my Mac Desktop and update?

    Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 6.1.6 for a fourth generation iPod touch.
    (122659)

  • Hi are there some who can help i am trying to update my programs in app store

    hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id  it will use to the update, so i dont now the email and the  password for the email used, and i cant change it to my apple id
    my problem started after i updated to maverick
    i hope there are someone who can help ???

    hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id  it will use to the update, so i dont now the email and the  password for the email used, and i cant change it to my apple id
    my problem started after i updated to maverick
    i hope there are someone who can help ???

  • Help I am trying to update my card info and the submit button on the site is not working

    Help I am trying to update my card info and the submit button on the site is not working

    What does the message say exactly? Are you sure it's not telling you the phone has no more space?

  • TS3694 i tried to update my jailbroken iphone 3gs to iOS 6 and i tried to activate it using redsn0w it uploaded but the phone didn't activate, then i tried to restore it in iTunes and it also wasn't working it shows 3194 error. Please help!

    i tried to update my jailbroken iphone 3gs to iOS 6 and i tried to activate it using redsn0w it uploaded but the phone didn't activate, then i tried to restore it in iTunes and it also wasn't working it shows 3194 error. Please help!

    brigikeh wrote:
    i tried to update my jailbroken iphone 3gs
    Buzz! Thank you for playing!
    Any warranty you had is void and your ability to get help here or from Apple is forfeit.
    Try Google. We can not assist you per the terms of service.
    It's very likely that your phone is now a brick.

  • I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

    I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring it showes your ipod is restore but still apple logo won't go

    My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes  showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?

    i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated

  • TS3694 i tried to update my i phone 3gs it couldnt update and now i try to restore and it cant be restored what i need to do to fix it.

    i tried to update my iphone 3gs and it couldnt update and now i try to restore it and it says it couldnt error 1015 so how i can fix this please.

    brigikeh wrote:
    i tried to update my jailbroken iphone 3gs
    Buzz! Thank you for playing!
    Any warranty you had is void and your ability to get help here or from Apple is forfeit.
    Try Google. We can not assist you per the terms of service.
    It's very likely that your phone is now a brick.

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT4972 I tried to update my old iPhone 3GS and is giving me a message that it can be activated. This is my old phone and it shouldn't have a line but I Still like to use it as an iPod. What can I do.

    I tried to update my old iPhone 3GS and is giving me a message that it can be activated. This is my old phone and it shouldn't have a line but I Still like to use it as an iPod. What can I do.

    Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

  • I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    The solution will be found here, select your computer type and software.
    http://support.apple.com/kb/TS2529

  • Im trying to update my itunes but its keeps coming up with invaild signature. How do i fix it?

    Im trying to update my itunes but it keeps saying invaild signature. How can i fix this? Its driving me mad

    Assuming a PC restart does not fix the problem, the simplest thing is to get a friend to download the installer for you and put it on a memory stick.
    This issue has been associated with router problems.
    If a known good copy of the installer still gives the same error there may be a problem in Windows.

Maybe you are looking for

  • Adobe Cloud membership - I am stuck in the loop of Licensing VERY Frustrating!!!

    I have an Adobe Cloud membership - I am stuck in the loop of Licensing as well VERY Frustrating - I have a project due and have been troubleshooting for days - Un Installing - Re installing - NIGHTMARE  - Please someone help me!!! Thanks in advance -

  • ORA-12560 &  imp\exp commands

    When typing imp and supplying the login system along with my password I got the ORA-12560 error. After reading about the problem on the forums and the internet, I found that setting the sid with the command "set ORACLE_SID=" solved the issue. The pro

  • FM DB_GET_TABLE_FIELDS

    Use the FM DB_GET_TABLE_FIELDS for this purpose. Pass the table name in TABNAME parameter and it will return a table (thru the TABLES parameter) which u can capture in an internal table with structure DBFIELD. Someone provide me this fm, but i dont k

  • Bat files

    Does anyone know how to run a .bat file from within a pl/sql script or trigger. I am using oracle 8.1.6 on windows 2000 THnaks in advance

  • My iPod touch 4th generation crashed twice when I was playing music and trying edit a photo. What should I do if it happens again?

    I was listening to music and I wet in to edit a couple of photos, then as I started, my iPod went black and the loading apple came up. After I got in, I tried the same thing and it crashed a second time. I decided to leave it alone for now, but what