Help i live in europe and the volume is too low
Jeff Bryan or others, i see that exist a program call gopod for skip the sound level protection in europe for the ipod mini. Exist any risk of malfunction if i install this program in mi ipod mini? what´s the way to install this program in my ipod mini?
There is always a risk in installing 3rd party programs onto the iPod no matter how minimal, but in this instance, you aren't actually installing a program, you are using GoPod to uncap the volume restriction on the iPod.
Does it void your warranty? Well in the strictest sense it might because it's not an Apple approved modification. However, I haven't heard of one single instance of GoPod causing an iPod malfunction.
Incidentally, I boost the volume of my iPods by using the method I mentioned (in iTunes), and don't notice any distortion.
Similar Messages
-
When I send project to iTunes the volume is too low. I have auto normalize checked.
When I save project to itunes the volume is too low on the entire project. I have auto normalize checked. I have been sure to reduce the volumes below the red clipping dots. This includes the master volume. It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB. Is sthere something else I should do to reproduce more volume when I share a project to itunes? Thank you.
DId you try a comparioson when exporting the same song with and without "Auto Normaize".
Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
My flash player didnot support such video and the version is too low
I have checked in your internet, it told me Flash Player is pre-installed with Internet Explorer in Windows 8. and Either Flash Player is disabled or ActiveX Filter is ON. But i really find Flash Player is enabled or ActiveX Filter is Off. For flash play, it can play most of flash video, however, it shows my flash player didnot support such video and the version is too low. In fact, the my downloaded version is the laterest. how can i fix the problem? thanks.
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
Try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
Flash "Display settings" window:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html -
pls help.... with my problem with my iphone
The phone randomly shutting down-that could be a hardware issue. Do you live near an apple store? they could see whats up with the phone. It could very well be something in the software though. A good way to test it would be to follow this article: http://support.apple.com/kb/HT4137 and test it for a few days. If it doesn't do the shutting down thing, you know it's a software issue. If it still does it, you know it's a hardware issue.
As far as deleting the apps, they'll always be there. Just make sure there's not a check mark next to them and they won't sync to your phone =] -
I have just purcahsed my Iphone 4s, and the volume is very low, I can hardly hear the other person talk. I have tried the botton for higher volume, but it doesn`t work. Can anybody give me an answer to what is wrong?
Did u take out the screen protection?
-
Speaker Volume Gone Too Low Suddenly
Hi,
I have an iPhone4 and it has worked like a charm for about a year now. Just recently, out of nowhere the volume on the speakers have gone extremly low. It is so low that you can only hear if you hold the speakers part of your phone close to your ear and there is no other sound/noise around you. On the first day this happened, I tried turning it off and back on again a few times without any success.
Then when I was playing a game next day, the volume came back up again suddenly and the phone was back to normal. It only lasted a few hours though, the same thing happened again and the volume has gone low since then. I have tried so many things hoping it is a software issue and might get resolved by doing a factory restore, but it's not helping at all.
Has anyone had this problem before? Any help would be greatly appreciated.
And if this is a hardware issue, is it fixable by replacing speakers or something? What should I do next in order to get this resolved?
Regards,
HiralOkay, for the record, the problem was dirt in the speaker, which was blocking it and muffling the sound. I managed to open the case (thank you Youtube) and get in their with compressed air, which managed to blow out whatever junk was in there. It made a huge difference. So that was it!
-
HP dv6 (windows 7-64): Speaker Volume is too low
Hello All,
I know you have been dealing with "volume is too low" issues in the pass and I wonder if you would like to help me.
I own a HP Pavillion dv6 quad edition (windows 7-64) and I am using the latest IDT driver for my laptop but the volume is really bad (too low). The problem is only present with the laptop's speakers because when I use headphones the sound is very good.
I have already tried the trick one of you have reccomended ---i.e. to uninstall latest driver (and software) and install the previous IDT driver so that I would get the "loudness enhancements" tab. I did it, and eventually got access to the tab but then the sound of my laptop went completely off... no sound whatsoever. In the end, I had to reinstall the latest IDT driver and since had regained sound again but the "volume is too low" issue obviously remains.
Any ideas?Hello @JGS27 ,
We meet again!
I see your sound is low on your notebook.
Did this start after the recovery you recently performed?
Here's some popular fixes for these types of issues:
Set the audio quality to a higher quality:
1. Right click the Speaker icon in the bottom right corner by your time.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
9. Click OK to close the Playback Devices.
10. Test.
Try each of these document:
Tips for fixing common sound problems.
No sound in Windows.
The speakers may also have a hardware issue. If that's the case you would need to contact HP Phone Support for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Let me know if changing the audio quality, or either of those documents work for you.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!
Sorry, I think you got scam.
Last thing you can try is restore as new:
http://support.apple.com/kb/HT1414 -
I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.
Sorry if this is too basic or confusing
Apparently in iOS 8 there are different volume settings for different applications
The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
Please let us know what happens
Thanks -
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???
Try an SMC Reset. (System Management Controller)
Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
Also try a PRAM Reset. (Parameter RAM)
Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
If this doesn't do it, run the Hardware Test in Extended
http://support.apple.com/kb/ht1509 -
I just opened my new earphones and the volume buttons don't work! Help
I just used my iPhone 5s earphones the first time yesterday and the volume buttons don't work. I tried unplugging them and then plugging them in again and they still don't work. Also when I plug in any kind of earphones in my phone it doesn't completely go in, is that supposed to happen?
Never mind, I found out why it didn't work. Since my phone and earphones were new the earphones didn't plug in well. So when I plugged it into my mac it went all the way in and the buttons worked. When I plugged it back in my phone it went al the way in this time and the buttons worked.
-
i have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it makes it impossible for me to play games or do anything
Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.
-
Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original SIM card Verizon and I try to activate, says: (error occurred activation, if this problem happen again please call at +1................). this is the hour to use it through the R-SIM 9 pro. everything works нормальнои calls and Internet and SMS, but I want to officially unlock. beforehand thank you
Well, you managed to find this support forum didn't you and you have an internet connection don't you? Then if you have all these things, go and find the number by going to the Verizon website and it should not be hard to find the number.
As for speaking English, this is not really our problem and it is surely something that you should have thought about before buying the phone in the first place.
You also need to know that Verizon in the US is a cdma operator and if you purchased an iPhone 4s, then it should not be locked. The Verizon 4s comes with a sim card tray that should be unlocked out of the box for use internatinoally on gsm networks, so all you should need to do is open the sim card tray and insert a sim card and you should pick up the local gsm network.
A cdma phone does not actually use a sim card, so there would be no original sim card with the phone because when it is used in the US it will pick up the Verizon cdma network without a sim card. The sim card is only for use on a gsm network which will not work in the US, but is designed to work outside the US. Open the sim card tray and insert your own local sim card and the phone should work and should not be locked.
Other than this, if you purchased the phone in the first place, it is the responsibility of the previous owner to cancel the Verizon contract. This is nothing to do with you, so contact the seller and ask them.
Other wise, go to the Verizon website and look up the number and call them. As they are the phone company, ultimately, they are the only ones who can help you. -
The ring switch and the volume botton do not work what is theproblem ?
The ring switch and the volume bottons do not work, what is the reason?
When you say they don't work, what are you trying to do? When you say the ring switch, I'm assuming you are referring to the mute switch that turns the ringer off/on? What troubleshooting have you tried?
The standard troubleshooting procedures for the iPhone are:
Power off/on
Reset
Restore, first from backup, then as a new phone.
IF that doesn't help, then you make an appointment at the nearest Apple Genius Bar and have them see if there is a hardware issue.
Maybe you are looking for
-
My location is sometimes wrong it says I'm in the middle of the ocean 80 miles away. This even happens when I'm connected to my wifi. This has become a really big pain in the ***. I've tried resetting and all that jazz but still I can't find a soluti
-
720x480 -- SD and Widescreen not 4:3 or 16:9
Hi, This is one of those topics that I've not seen answered definitively. NTSC DV is 720x480 square pixels. If it's NTSC SD, the final display is 640x480 -- a 4:3 "frame" or screen aspect ratio. The pixels are squished (taller than wide) such that th
-
Transaction Code for non-PO invoices
Hello all, Is there any transaction code to generate a report of all non PO transactions posted in FY?? We want to pull a report on a monthly/quarterly/basis to identify as to how many non PO transactions are posted for a period. We need a report to
-
Reg: Subcontracting Offset Accounts
Hi, I am working in SAP BW. I have a query related to Subcontracting and Offset Accounts. I need this for the analysis of one of the BW issues. We have three Accounts:64102002, 64100004,64150003. Of these three, 64150003 is the Subcontracting Account
-
Authorization for project (table PROJ)
Hi experts ! I would like create role for PS modula which is limited to field Object Class equal Investment. Itu2019s impossible. How I can check which field I can use for authorization for project (table PROJ). Rgds Stenwa