Help! I'm stuck in the Mac OS X Installer

I’m trying to restore my Mac mini back to its factory settings, but whenever I restart from the installation disk, a dialog pops up (after choosing a language) that says “Mac OS X cannot be installed on this computer.”
Then, after reading a few discussions and thinking this was what I was supposed to do, I went to Disk Utility and erased/reformatted the hard drive [as Mac OS X Extended (Journaled) with 1 partition using the Apple Partition Map]. Now the hard drive is not showing up in the Startup Disk. The only two options that show up in the Startup Disk are the Mac OS X installation disc [which brings me to the dialog box that says it can’t be installed] and Network Startup.
Any ideas??

Apple Partion map is the format for the older PPC mac;s...you need to format it for the intel version...It should be defaulting to GUID...leave it there.

Similar Messages

  • Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

    Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

    If you can't eject a CD or DVD or open the drive tray
    How do I eject a defective DVD?: Apple Support Communities
    How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
    From:
    Mac computers: About startup tones
    3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
    1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • Need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

    need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

    A flashing question mark or globe appears when you start your Mac

  • What are the steps to reseting the administrator password with the mac os x installation dvd?

    what are the steps to reseting teh administrator password with the mac os x installation dvd?

    See OS X- Changing or resetting an account password.

  • The mac os x installation couldn't be completed

    Hi guys,
    I replace my HD in my new laptop. everything is perfect until I'm trying to install the osx with the grey dvd that came with the machine. 15 min more or less after the installation started an error message appear: the mac os x installation couldn't be completed.
    With a crash log window. It does not give more instruction. I try this 3 times and it always does the same error. I'm suspecting maybe it's the dvd but I'm not sure.
    I did an extensive hardware test and one error showed up :
    4MEM/63/4000000: 0x86298098
    That's it. Nothing more.
    I look online but found nothing.
    I tried to verify the disk with the disk utilities everything on this side is good.
    So now I don't really know where to look.
    Any suggestion?
    THanks!

    The OWC RAM may be bad, and if it is, yes, it's the cause of your installation problem. Or you may not have gotten it firmly seated in its slots, which could very easily have the same effect. You didn't mention that the RAM was also new in your first post, and that fact makes it more likely that the seating of the RAM is where the problem lies. Remove it and reinsert it very firmly, then run the Hardware Test again. If it still returns the MEM error, call OWC and arrange to exchange the RAM. OWC is very good about that.
    Out of curiosity, is this "NuRAM" or OWC's "house brand" RAM?
    If you were to take the machine in for repair with third-party RAM installed and an error message indicating a RAM problem, Apple would almost certainly blame the RAM, remove and discard it, and return the machine to you with the same amount of RAM that was installed at the factory. You don't want that. Send it in with its original RAM if you send it in at all. I don't think it will come to that, though — my bet is that by reseating the RAM you'll resolve the problem.
    As for the hard drive, there's always a chance that the drive in a machine under repair by Apple will be erased and have a new OS installed on it for "clean" testing purposes. You certainly won't want to expose whatever you've just installed on your new one to that risk.

  • [svn] 3090: get the Mac DMG web installer up-to-date to player 10.0.0.591

    Revision: 3090
    Author: [email protected]
    Date: 2008-09-04 07:22:28 -0700 (Thu, 04 Sep 2008)
    Log Message:
    get the Mac DMG web installer up-to-date to player 10.0.0.591
    Modified Paths:
    flex/sdk/trunk/in/player/10/mac/Install Flash Player 10 UB.dmg

    Hi, I appreciate your comments. Since I don't use Mac it's not as easy for me to know exactly where Flash Player files are, etc. as I do with the PC.
    There is also a difference of opinion among Mac users regarding the need to Uninstall the current version of Flash Player before Installing the new version. The instructions from Adobe are to use the Uninstaller first. Any update of Flash Player is a new version, not an addon to the current version.
    The Uninstaller from my understanding is also changed when a new Flash Player version is released. I don't know if you Uninstalled the 10.1 prior to trying to Install the 10.2, but this may have had something to do with the problem. Then also, the Shockwave Flash plugin for Safari may have been disabled.
    Several things to check when a new Flash Player is released.
    Thanks,
    eidnolb

  • HELP! Mail stuck in the queue.

    Hey All,
    We just noticed that none of us here recieved any mail today and that all of our messages incoming/outgoing have been stuck in the queue all day.
    We seem to be able to view old messages with our mail clients as well as any folders. But any new messages that we send or recieve just go to the server and sit there.
    It's quite puzzeling because we haven't changed anything on it, the server has just been quietly humming along for a while now.
    However, this seems to have started happening after we restarted the box this morning because a web app we were building on it ended up in an infinite loop.
    I tried re-starting the box, restarting the mail service, resending the queue and nothing, messages hit the queue and fail to be delivered to mailboxes.
    Looking at my logs I saw this:
    Nov 9 16:56:28 resserver imap[4733]: DBERROR: critical database situation
    Nov 9 17:00:07 resserver imap[4833]: DBERROR: critical database situation
    Nov 9 17:15:56 resserver reconstruct[5700]: DBERROR: critical database situation
    Nov 9 17:16:02 resserver reconstruct[5726]: DBERROR: critical database situation
    In the queue some messages say this at the end:
    host 127.0.0.1[127.0.0.1] said: 421 4.3.2 Service shutting down, closing channel (in reply to end of DATA command
    Looking in my resources and in other places on the forums I've tried the following so far in hopes to narrow down and fix the problem:
    - rebuilt with mailbfr (as per petrobytes suggestion with someone else)
    - turned on and off content filtering
    - confirmed that the machine has the same IP
    - confirmed that it resolves forward and backward to it's hostname/IP
    I can post any conf files you need, I'm desperate to get this fixed! Any help or insight anyone could provide would be well appreciated!
    eMac, iBook, iMac, xServe, PowerBook   Mac OS X (10.4.3)  

    I'm noticing some interesting stuff happening in the logs can someone make sense of this?
    solutionim.com /usr/bin/amavisd[7872]: (07872-01) Requesting process rundown after fatal error
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7872]: (07872-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 2 results at (eval 41) line 150.
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) PRESERVING EVIDENCE in /var/amavis/amavis-20061109T184715-07873
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) TIMING [total 350 ms] - SMTP EHLO: 23 (7%), SMTP pre-MAIL: 2 (1%), mkdir tempdir: 1 (0%), create email.txt: 2 (0%), SMTP pre-DATA-flush: 9 (3%), SMTP DATA: 9 (3%), body_hash: 3 (1%), mkdir parts: 3 (1%), mime_decode: 72 (21%), rundown: 226 (65%)
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN4> line 568.
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) Requesting process rundown after fatal error
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7873]: (07873-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) ESMTP::10024 /var/amavis/amavis-20061109T184715-07876: <[email protected]> -> <[email protected]> Received: SIZE=50687 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 07876-01 for <[email protected]>; Thu, 9 Nov 2006 18:47:15 -0500 (EST)
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) Checking: [216.46.146.115] <[email protected]> -> <[email protected]>
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) p004 1 Content-Type: multipart/mixed
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) p005 1/1 Content-Type: multipart/alternative
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) p001 1/1/1 Content-Type: text/plain, size: 259 B, name:
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) p002 1/1/2 Content-Type: text/html, size: 2227 B, name:
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) p003 1/2 Content-Type: application/vnd.ms-excel, size: 33280 B, name: Emploment Application.xls
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7879]: (07876-01) run_command: child process [7879]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7879]: (07876-01) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20061109T184715-07876
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 3 results at (eval 41) line 150.
    Nov 9 18:47:15 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) PRESERVING EVIDENCE in /var/amavis/amavis-20061109T184715-07876
    Nov 9 18:47:16 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) TIMING [total 366 ms] - SMTP EHLO: 24 (7%), SMTP pre-MAIL: 3 (1%), mkdir tempdir: 2 (0%), create email.txt: 2 (1%), SMTP pre-DATA-flush: 25 (7%), SMTP DATA: 31 (8%), body_hash: 3 (1%), mkdir parts: 3 (1%), mime_decode: 95 (26%), rundown: 178 (49%)
    Nov 9 18:47:16 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN4> line 771.
    Nov 9 18:47:16 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) Requesting process rundown after fatal error
    Nov 9 18:47:16 resserver.resolutionim.com /usr/bin/amavisd[7876]: (07876-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 18:48:33 resserver.resolutionim.com /usr/bin/amavisd[7759]: Net::Server: 2006/11/09-18:48:33 Server closing!
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: starting. /usr/bin/amavisd at resserver.resolutionim.com amavisd-new-2.2.0 (20041102), Unicode aware
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: user=, EUID: 0 (0); group=, EGID: 0 0 (0 0)
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Perl version 5.008006
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Net::Server: 2006/11/09-18:48:36 Amavis (type Net::Server::PreForkSimple) starting! pid(7927)
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Net::Server: Binding to UNIX socket file /var/amavis/amavisd.sock using SOCK_STREAM
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Net::Server: Binding to TCP port 10024 on host 127.0.0.1
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Net::Server: Setting gid to "82 82"
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Net::Server: Setting uid to "82"
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Amavis::Conf 2.033
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Archive::Tar 1.22
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Archive::Zip 1.14
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Compress::Zlib 1.33
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Convert::TNEF 0.17
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Convert::UUlib 1.03
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module DB_File 1.810
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module MIME::Entity 5.416
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module MIME::Parser 5.416
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module MIME::Tools 5.416
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Mail::Header 1.65
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Mail::Internet 1.65
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Mail::SpamAssassin 3.001005
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Net::Cmd 2.26
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Net::DNS 0.58
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Net::SMTP 2.29
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Net::Server 0.94
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Time::HiRes 1.65
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Module Unix::Syslog 0.99
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Amavis::DB code NOT loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Amavis::Cache code NOT loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Lookup::SQL code NOT loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Lookup::LDAP code NOT loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: AMCL-in protocol code loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: SMTP-in protocol code loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: ANTI-VIRUS code loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: ANTI-SPAM code loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Unpackers code loaded
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found $file at /usr/bin/file
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $arc, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found $gzip at /usr/bin/gzip
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found $bzip2 at /usr/bin/bzip2
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $lzop, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $lha, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $unarj, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found $uncompress at /usr/bin/uncompress
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $unfreeze, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $unrar, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $zoo, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found $cpio at /usr/bin/cpio
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $ar, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $rpm2cpio, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $cabextract, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: No $dspam, not using it
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: Found secondary av scanner Clam Antivirus - clamscan at /usr/bin/clamscan
    Nov 9 18:48:36 resserver.resolutionim.com /usr/bin/amavisd[7927]: SpamControl: initializing Mail::SpamAssassin
    Nov 9 18:48:44 resserver.resolutionim.com /usr/bin/amavisd[7927]: SpamControl: done
    SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN4> line 350.
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9584]: (09584-01) Requesting process rundown after fatal error
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9584]: (09584-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) ESMTP::10024 /var/amavis/amavis-20061109T194144-09586: <[email protected]> -> <[email protected]>,<[email protected]> Received: SIZE=236428 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09586-01; Thu, 9 Nov 2006 19:41:44 -0500 (EST)
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) Checking: [192.168.1.121] <[email protected]> -> <[email protected]>,<[email protected]>
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) ESMTP::10024 /var/amavis/amavis-20061109T194144-09587: <[email protected]> -> <[email protected]> Received: SIZE=2799147 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09587-01 for <[email protected]>; Thu, 9 Nov 2006 19:41:44 -0500 (EST)
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p008 1 Content-Type: multipart/alternative
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p001 1/1 Content-Type: text/plain, size: 1103 B, name:
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p009 1/2 Content-Type: multipart/mixed
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p002 1/2/1 Content-Type: text/html, size: 4971 B, name:
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p003 1/2/2 Content-Type: application/vnd.ms-excel, size: 16384 B, name: Feed Locations.xls
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p004 1/2/3 Content-Type: application/octet-stream, size: 15355 B, name: Example of Feed Locations.pdf
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p005 1/2/4 Content-Type: image/jpeg, size: 68882 B, name: zurlftoct06.JPG
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p006 1/2/5 Content-Type: image/jpeg, size: 65599 B, name: extrrtlondsoct06.JPG
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) p007 1/2/6 Content-Type: text/html, size: 184 B, name:
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9588]: (09586-01) run_command: child process [9588]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9588]: (09586-01) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20061109T194144-09586
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 7 results at (eval 41) line 150.
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) PRESERVING EVIDENCE in /var/amavis/amavis-20061109T194144-09586
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) TIMING [total 435 ms] - SMTP EHLO: 22 (5%), SMTP pre-MAIL: 3 (1%), mkdir tempdir: 1 (0%), create email.txt: 2 (0%), SMTP pre-DATA-flush: 10 (2%), SMTP DATA: 45 (10%), body_hash: 6 (1%), mkdir parts: 3 (1%), mime_decode: 158 (36%), rundown: 185 (42%)
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN4> line 3144.
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) Requesting process rundown after fatal error
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9586]: (09586-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) ESMTP::10024 /var/amavis/amavis-20061109T194144-09589: <[email protected]> -> <[email protected]> Received: SIZE=2244 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09589-01 for <[email protected]>; Thu, 9 Nov 2006 19:41:44 -0500 (EST)
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) Checking: [65.54.246.141] <[email protected]> -> <[email protected]>
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) p001 1 Content-Type: text/plain, size: 1084 B, name:
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9590]: (09589-01) run_command: child process [9590]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
    Nov 9 19:41:44 resserver.resolutionim.com /usr/bin/amavisd[9590]: (09589-01) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20061109T194144-09589
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 1 results at (eval 41) line 150.
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) PRESERVING EVIDENCE in /var/amavis/amavis-20061109T194144-09589
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) TIMING [total 240 ms] - SMTP EHLO: 19 (8%), SMTP pre-MAIL: 2 (1%), mkdir tempdir: 1 (1%), create email.txt: 2 (1%), SMTP pre-DATA-flush: 8 (3%), SMTP DATA: 2 (1%), body_hash: 2 (1%), mkdir parts: 3 (1%), mime_decode: 36 (15%), rundown: 165 (69%)
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN4> line 67.
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) Requesting process rundown after fatal error
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9589]: (09589-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9591]: (09591-01) ESMTP::10024 /var/amavis/amavis-20061109T194145-09591: <[email protected]> -> <[email protected]> Received: SIZE=2799145 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09591-01 for <[email protected]>; Thu, 9 Nov 2006 19:41:45 -0500 (EST)
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) Checking: [65.54.246.171] <[email protected]> -> <[email protected]>
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9591]: (09591-01) Checking: [65.54.246.173] <[email protected]> -> <[email protected]>
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) p003 1 Content-Type: multipart/mixed
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) p001 1/1 Content-Type: text/html, size: 6064 B, name:
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) p002 1/2 Content-Type: video/x-ms-wmv, size: 2025860 B, name: JBSklip.wmv
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9592]: (09587-01) run_command: child process [9592]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
    Nov 9 19:41:45 resserver.resolutionim.com /usr/bin/amavisd[9592]: (09587-01) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20061109T194144-09587
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 2 results at (eval 41) line 150.
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) PRESERVING EVIDENCE in /var/amavis/amavis-20061109T194144-09587
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-01) TIMING [total 1950 ms] - SMTP EHLO: 22 (1%), SMTP pre-MAIL: 4 (0%), mkdir tempdir: 1 (0%), create email.txt: 2 (0%), SMTP pre-DATA-flush: 9 (0%), SMTP DATA: 868 (44%), body_hash: 34 (2%), mkdir parts: 3 (0%), mime_decode: 610 (31%), rundown: 397 (20%)
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-02) ESMTP::10024 /var/amavis/amavis-20061109T194146-09587: <[email protected]> -> <[email protected]> Received: SIZE=14124 from resolutionim.com ([127.0.0.1]) by localhost (resserver.resolutionim.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09587-02 for <[email protected]>; Thu, 9 Nov 2006 19:41:46 -0500 (EST)
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-02) Checking: [64.233.166.181] <[email protected]> -> <[email protected]>
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-02) p003 1 Content-Type: multipart/alternative
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-02) p001 1/1 Content-Type: text/plain, size: 2089 B, name:
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9587]: (09587-02) p002 1/2 Content-Type: text/html, size: 9454 B, name:
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9593]: (09587-02) run_command: child process [9593]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
    Nov 9 19:41:46 resserver.resolutionim.com /usr/bin/amavisd[9593]: (09587-02) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20061109T194146-09587

  • Help!! New to the mac world!!

    Received a macbook pro and im trying to log onto my wireless network and it just ain't happening. the mac is for the missus for xmas day and im setting it up while she is away, however i cant connect to my home wireless network which is WEP encrypted 128-bit. It has originally been configured on a PC (I know boo hiss!). I'm putting all the correct info in and im proper scratching me head now. Any help would be greatly appreciated on this. Many thanks in advance.
    Stu
    PS My wireless router is a Sitecom Broadband 2.4GHz, 140g. The mac can find the network on the scan and displays it but other than that, no go. Boo Hoo:(

    i haven't tried it with the Ethernet cable as yet but im sure the wep key is ok, ive looked up my settings to confirm it is wep. I can connect other devices to the network no problem such as my Nintendo DS and PSP, Laptop PC etc, just not the mac.
    Its back in its box now so ill have to wait to xmas day when the mrs opens it, its hers ya see and today was the only opportunity i had to get connected and play about with it!!! So ill try again on xmas day!!!
    Merry Xmas!
    Stuart
    PS The Mac was a joy to play about on though, absolutely fantastic piece of equipment.

  • Disc 2 damaged - I'm stuck in the middle of a installation process HELP!

    Hi, folks.
    I sold my iBook last thursday and I was preparing it for delivery. So, I started a Erase & Install of Tiger with the DVDs I received from Apple in order to give it to the new owner with a brand new system and none of my files. The problem is that after disc 1 had been popped out by the system and I inserted DVD 2, I found out it's damaged. iBook won't read it at all.
    I tried several things such as copying the DVD in other computers but neither my MacBook nor my wife's PC can even read it. When it's about 20% read, a error messages shows up and process stops.
    So, to make long things short, my iBook is stuck in the "Please, insert Disc labeled Mac OS X Installation DVD 2".
    Is there a way I could force the system to skip this disc and log into Mac OS X even though I woudn't have the additional software installed? My priority now is to see the computer working.
    Thanks in advance.
    JP

    I would call AppleCare and get a replacement disk, and just wait for it to come. Keep the machine where it won't overheat on a surface made of metal or stone glass, or plastic, and keep it plugged in.

  • My freind tried to get os x lion and i dont hav eit now im stuck on the mac osx utillites thing and i dont have osx lion and it wont reconize my hdd so im stuck on it

    can someone help me please

    Yet another example of why it's a VERY BAD IDEA to do a clean install of Lion unless you are already VERY familiar with how to tweak the Mac OS. There's a reason Apple engineers removed it as an option. To accomplish it you have to erase your disk; not for the faint hearted.
    Do you have a backup? PLEASE don't tell us you did this without a robust backup.
    You erased the operating machine, so your computer went to the only place it could find one, the Recovery partition. And it's minimal, so it has to download everything in small chunks to reinstall itself. So yeah, it could take 10 hours.
    Here's another option. Do you still have the original disks that came with your machine? Put one in and restart from it. You can reinstall your old system much faster. Then go to the Mac App Store and your purchase history and see if you can redownload Lion (I think that still works).
    And this time just do yourself a favor and install per Apple's instructions. When the machine starts into Lion, use Setup ***'t (the first thing that fires up) to migrate from your backup.
    Rob

  • Help please ! stuck on the connect to itunes screen !

    Could someone please help,my daughter's Touch is stuck on the screen telling you to connect to itunes, been like it for 2 days don't know what to do !
    thanks

    Have you tried a simple reset: pushing in both the "home" & "sleep/wake" button" to bring it up from "off"? I'm assuming you can at least turn the unit on & off, that wasn't explained.

  • [HELP] MovieClip Button Stucks after the first use!

    Hello Everyone... i am new on this forum and i need your help!!!
    so i'm working on a map on flash profesional cs6 ActionScript 3
    that map has some button that i've made them symbols from images and now is movieclips!
    so when you are pressing a button you are going to a new frame with a pop- up that have informations about this place...
    anyway... i have 22 frames...
    and on first frame i've put the scripts [gotoAndStop()] that when you're pressing the button to go to an another frame...
    so i have 22 buttons... if i will click a button and going to another frame and then want to press imediately an another button to go to another frame... it works... but is not happening to 3 buttons... is strange...
    so if i am on the first frame... pressing a button... and after pressing the button that doesn't works... maybe will work... but if i will press again the first button and again back to the second button... it will not working!!!!
    that is happening with 3-4 buttons...
    and the strange is that when the button stucks and doesn't work... i don't have any compile or output error...
    i'm used the command trace(); to check if the button is pressed when is not going to the frame... and it doesn't work!!!
    so my commands is this...
    import flash.system.fscommand;
    import flash.display.*;
    import flash.events.*;
    stop();
    fscommand("fullscreen", "true");
    stage.scaleMode = StageScaleMode.SHOW_ALL;
    stage.addEventListener(MouseEvent.RIGHT_CLICK, function(e:Event){});
    Texnopolh.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
    function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
              gotoAndStop(2);
    Omonoia.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
    function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
              gotoAndStop(3);
    Syntagma.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
    function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
              gotoAndStop(4);
    Kotzia.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);
    function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
              gotoAndStop(5);
    Boukourestiou.addEventListener(MouseEvent.MOUSE_UP, fl_ClickToGoToAndStopAtFrame_7);
    function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
              gotoAndStop(6);
    Pathsia.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
    function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
              gotoAndStop(7);
    Athinas.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
    function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
              gotoAndStop(8);
    Akropolh.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
    function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
              gotoAndStop(9);
    Panepistimio.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
    function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
              gotoAndStop(10);
    AgiosPaulos.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
    function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
              gotoAndStop(11);
    Kupselh.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_13);
    function fl_ClickToGoToAndStopAtFrame_13(event:MouseEvent):void
              gotoAndStop(12);
    Dhmarxeio.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_14);
    function fl_ClickToGoToAndStopAtFrame_14(event:MouseEvent):void
              gotoAndStop(13);
    Euaggelismos.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_15);
    function fl_ClickToGoToAndStopAtFrame_15(event:MouseEvent):void
              gotoAndStop(14);
    Polutexnio.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_16);
    function fl_ClickToGoToAndStopAtFrame_16(event:MouseEvent):void
              gotoAndStop(15);
    Zonars.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_17);
    function fl_ClickToGoToAndStopAtFrame_17(event:MouseEvent):void
              gotoAndStop(16);
    KOPER.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_18);
    function fl_ClickToGoToAndStopAtFrame_18(event:MouseEvent):void
              gotoAndStop(17);
    EBGA.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_19);
    function fl_ClickToGoToAndStopAtFrame_19(event:MouseEvent):void
              gotoAndStop(18);
    OSRAM.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_20);
    function fl_ClickToGoToAndStopAtFrame_20(event:MouseEvent):void
              gotoAndStop(19);
    Credits.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_25);
    function fl_ClickToGoToAndStopAtFrame_25(event:MouseEvent):void
              gotoAndStop(20);
    Falhro.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_21);
    function fl_ClickToGoToAndStopAtFrame_21(event:MouseEvent):void
              gotoAndStop(21);
    Xilton.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_23);
    function fl_ClickToGoToAndStopAtFrame_23(event:MouseEvent):void
              gotoAndStop(22);
    Background.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_27);
    function fl_ClickToGoToAndStopAtFrame_27(event:MouseEvent):void
              gotoAndStop(1);
    Please if you can, help me!!! is important... i am new on flash and don'tt know too much...
    and sorry for my bad english!!!

    Actually i don't pasted the code to all frames... only on first frame... but the other buttons are working perfectly!!!!
    When i've tryed to put the code on all frames... it was saying that i have error on another code... not for this button!!! crazy? i think so!!!
    i was have that problem only to 1 frame... for example the button with the problem is "Boukourestiou" and on Boukourestiou's frame i was have an other code... the code for "Falhro"
    and when i was going to press that button... it was saying that i have problem on that code: Falhro.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_21);

  • HELP..  new to the Mac.  How on earth do i do my homework.. How do i write essays?

    how do i create a document.  Write an essay?

    Get or open a program that allows you to do word processing, and start typing away. It's no different than using Windows or Linux, but it's definitely not texting so besides typing spaces you'll have to give your thumbs a rest on this one.

  • Boot camp stuck at the start of windows installation

    Hi, i'm reading through the comunity and tried to find an answer to my issue. There was a another discussion that was close, but not enough
    Let me state clearly what's going on.
    Macbook pro OSX Mountain Lion 10.8.2
    As i already have a win7 ultimate dvd for installation, i just marked Download software and Install windows. First step goes fine and second step starts, computer reboots and begins windows installation... so window hasn't installed yet, but drivers are required. That's where i get stuck.

    It wasn't the first time i used bootcamp, i tried it before on (Snow) Leopard. I didn't remember that formatting, i think it's new to (Mountain) Lion.
    I just run into those two problems. The first about the drivers before installation, solved by changing windows dvd. And this one by your suggestion... thank you.
    Anyways, first problem was really weird and it wasn't just me having it.

  • Disk utility stuck in the middle of system installation

    I have just fitted a new solid state hard drive. My old drive is now where my non functioning Superddrive users to be, which is working fine.
    I started by giving my new drive one partition with disk utility. That was fine and I began to install OS Lion. The machine restarted.
    Then I got a message to say that my disk was damaged and that I should run disk utility. Within the installer programme I went back and clicked on 'Repair disk'. However disk utility reported no problems. So I tried to repartition my drive. This is where the utility got stuck 'waiting for disks to reappear'. Eventually the machine started getting hot, so a hard restart seemed my only option. Soon I was back in disk utility and still there was no reported damage to my drive. Partition restored, (by selecting 'Erase' rather than 'Partition'), I went on with my installation, but this time was told a recovery partition couldn't be created. Back into disk utility, still no damage but the partition 'erase' is trying to restore is taking forever!
    What should I do now? It looks like my plans for a faster system are doomed!

    I forgot to update you on what has happened since.
    I wanted to get back into the system on my old hard drive. Disk Utility was totally stuck and so I hard restarted once more. I seemed to be going round in circles but was glad to see that every time I asked D.U. to repair my new drive it reported that all was well. Eventually, holding down the option key in the vain hope of getting back onto my old drive I found a screen wheere I had the opportunity to start up from the recovery drive, presumeably of my old drive since it had told me it couldn't create one on the new drive.
    I followed this and went through the process again. This time it asked me to sign in and get connected to the internet. I soon realised that it was trying to download the install programme which I know takes ages as I did it yesterday. So I quit out of that and was then finally offered the chance of starting up in my old drive.
    Running D.U. from my old drive revealed loads of red writing. I'm currently searching for my Disk Warrior CD in the hope that it may be reparable as D.U. doesn't seem to be able to do much.
    I can't believe these SSDs are so fragile! They are surely the same technology as the seemingly indestructible flash drives we all carry around on our keyrings and yet I've now had two of these fail me on system installation. Maybe I should just put a flash drive in my computer and have done with it!

Maybe you are looking for