HELP!! i need a driver

sound blaster li've 5. (se)i need a driver for windows vista i don't know what 2 doany body can help me?

First there is a Vista specific forum here,
http://forums.creative.com/creativelabs/board?board.id=Vista
which without too much effort you would have found this thread,
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2740
and no, other than the driver package in that thread there will never be official support for that card under Vista.

Similar Messages

  • Need graphics driver for my new ho notebook pc 5-r074TY

    i have dowloaded the latest driver on hp websitehttp://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=in&dlc=en&sw_lang=&product=7308... for intel graphics for my 64 bit win7 but wen i start to install it says the cmputer does not meet minimum requirements
     though in website both support for win 7 n win 81 is showing. please help mei need the driver. its urgent

    Hi
    Please find the link given below might help you to fix your issue.
    Link
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Help ! Need PCI Encryption/Decryption Controller Driver for New HP 355 G2 (AMD) w/Win 7 Pro 64 Bit

    Just rebuilt new HP 355 G2 to Win 7 64 bit.  The ONLY driver I can not locate or get to work is the PCI Encryption/Decryption Controller. I installed all latest drivers for this model/OS from both HP and AMD sites still no luck. AMD autodetect utility and Catalyst software installed all other drivers successfully except this one and when completes says all drivers, including chipset, are installed successfully and current.
    I am at a complete loss where to get this driver from a OEM site, can you help ?
    Device ID's:
    PCI\VEN_1022&DEV_1537&SUBSYS_15371022&REV_00
    PCI\VEN_1022&DEV_1537&SUBSYS_15371022
    PCI\VEN_1022&DEV_1537&CC_108000
    PCI\VEN_1022&DEV_1537&CC_1080
    Thanks !!!
    This question was solved.
    View Solution.

    Hi:
    You need to run this driver and then manually install it.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1
    To manually install the driver go to the device manager and click on the PCI Encryption/Decryption Controller needing the driver.
    Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option, and browse to the driver folder that was created when you ran the file.
    That folder will be located in C:\SWSetup\sp66974.
    Make sure the Include Subfolders box is checked, and the driver should install.
    Then reboot.

  • HELP! I need a driver for Soundblas

    I need a driver for my creative labs soundblaster generic for Windows XP, model # ct745a-tbp
    I can't find one anywhere
    Please help!!

    I'm having the same problem. So any info would be appreciated. Thanks

  • HELP !! i need a driver for webcam instant skype edition

    HELP !! i need a driver? for webcam instant skype edition for windows vista
    my cam not work on windows vista
    anybody can help me plz?

    I'm having the same problem. So any info would be appreciated. Thanks

  • Please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit

    please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit. 

    Double post
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PLEASE HELP ME, I NEED ALL DRIVER HP ENVY M6-K010DX SUPPORT WIN 7 64 BIT

    please help me, i need  all driver HP ENVY m6-k010dx support win 7 64 bit

    Hi:
    Try the W7 x64 drivers and software from this model which has the same processor.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6545...

  • Please i really need a big help hare. hp lj1300 driver for win 7 32 bit and 64 bit printer driver.

    hi every one please i really need halp hare i have a hp LJ 1300 printer and i have been trying to install it on window 7 (32 bit and  64 bit). i have been looking for the LasarJet 1300 printer driver but i have not seen any. i even down loaded form hp web site. but it still did not work. after installing when u go to the divice mannger its showing the printer driver not found and then its not even printing. am using a usb and a laptop. i really need this driver for window 7. so i could get my work done. please some one help me hare.

    Hi:
    This 32 bit Intel graphics driver should work...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719

  • Need help buying new hard drive

    I have a macbook that needs a new hard drive and need help knowing what hard drives to buy that will be compatible with it. It is a macbook pro 17inch model no: A1297.
    Any help would be appreciated, Thanks

    Any 2.5" diameter, 9.5mm thick SATA drive will be compatible.  Currently they come up to 1.5 TB in capacity.  I have a 1 TB Seagate SSHD (hybrid) drive installed in my primary MBP.  The cost is a modest premium over a conventional HDD of the same capacity.  Boot and shutdown times are significantly faster when compared to a conventional HDD,  I can recommend this as an option.
    If the bank account permits, an SSD will produce the overall maximum performance gains.  Boot, shutdown and resource hungry applications will be noticeably faster.  Casualyll use such as e-mails and text editing will produce no meaningful performance differences compared to a conventional HDD.
    I am of the opinion that the cost premium is still too high for the benefits that they afford.  Other have different views.
    Ciao.

  • Need help reformatting my hard drive for mac only

    Help please
    Need help reformatting my hard drive for mac only with my toshishba hard drive

    What Mac is this please, with what version of OS X?

  • My computer says I need a driver for my iPhone4s but I don't now how to get a driver plz help

    I need help my computer says I need a driver for my iPhone 4s but I don't know how to get a driver for my iPhone plz help

    Remove/delete itunes and reinstall it.

  • Help I need to locate a driver for my soundblaster live 24 bit soundcard

    My son has been given the following PC games for christmas:-
    Command & Conquer 3,
    Command & Conquer Red Alert 3,
    Arma; Armed Assault,
    Medal of Honour: Airborne
    The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
    The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
    I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
    Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

    Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
    Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
    here is it:
    [url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
    The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
    Good luck and Merry Christmas!!!
    Message Edited by CTman on 2-26-2008 0:2 [email protected]

  • I need help finding a sound driv

    I got a email from soe saying that i need a driver in order to play starwars galaxies. so i have been looking for it but i cant seem to find the right one can someone please help me.

    EvrikDruvo,
    You will want to download the latest driver for the Audigy MP3+ or Gamer (they are the same driver). Go to our driver/downloads section and get the web update drivers. The automatic driver installer may also be able to help you.
    Jeremy

  • I need GPIB Driver for Keithley 263 Calibrator/Source Meter using Labview. Can anybody help? Thank you.

    I need GPIB Driver for Keithley 263 Calibrator/Source Meter using Labview. Can anybody help?
    Thank you in advance.

    Hi,
    on Keithley's website is explained :
    "The Model 263 offers a more economical, more precise alternative to the Model 6430 or the Model 236 when used as a low-current source. It is used almost exclusively as a current calibrator."
    This leads to Model 236.... A LabVIEW-driver is available @: http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Keithley%22&qt=&layout=IDNet
    Maybe you have to "reconstruct" some parts - but it will help.
    regards
    wha

  • Windows XP Clean Install – What I discovered and the help I need

    Windows XP Clean Install – What I discovered and the help I need
    I previously had a problem with my Laptop dying randomly you can read about it in the thread entitled Computer dies Randomly (Battery also dead) click to view
    Before I realised the solutions, I thought that maybe my Laptop had become infected with a Virus and decided it would be prudent to do a clean install of the Windows XP operating system.
    Everything went perfectly and thought a clean install was a good opportunity to download the “XP Service Pack 3” SP3 and did so, it seemed very quiet though and that’s when I realised I had no sound…
    I downloaded all of the sound drivers I could find on the Lenovo site for 3000 N100 (I knew from previous experience that the “SOUNDMAX” driver is the only one that actually works with this 3000 N100) in order to install this you have to install the Realtek HD audio driver, but in order to install that you have to install some other Driver/Soft that only works with SP1 or SP2 if you try to install it with SP3 it will say that you don’t need the file as your Service pack is newer than the file you want to install, this is understandable as SP3 is not final as of yet (but it’s good to know).
    My next problem was that my extra RAM was not detected, this was fixed by updating the BIOS, after installing all of the System updates, PC Doctor, everything I could find for 3000 N100 I decided to rest, I pushed the Lenovo care button and it did not work, I found a hot key driver and installed it but still the Lenovo care button does not work, previously when I pushed this button it would bring up the Lenovo menu but now it’s just a dead button, Does anyone know how to get this button working again?
    I am pretty sure that everything else is working fine now, just that button not working is very annoying, is there a set routing of installs you must do to get everything working, i.e. bios 1st audio 2nd system update 3rd etc...
    Please help, I hope I have helped you...
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Solved!
    Go to Solution.

    Ok first everything works now... except the Lenovo Care button, I just posted the other stuff cause it might help other members,  I have searched the forum for an anwser to this problem but there was only one anwser (suggesting to uninstall the driver restart and re-install it) and it did not result in a working Lenovo Care button...
    I don't beleive the Lenovo keyboad drivers are in any way related to the Service pack 3 as they do not use the Service pack files, to back this up I also had the same problem when Service Pack 2 was installed...
    The Lenovo Care button works fine on Boot up screen to access the rescue and recovery software (So the mechanics of the button are fine) but once Windows XP loads it is just a dead button, I remember it used to open up the Lenovo Care Start bar, I got it working once in the past but I can't remember what I did, I thought someone here might know the anwser...

Maybe you are looking for