Help! I need Comments List to Open in Initial View

Hopefully I am in the right forum now. I have Adobe 8 Professional. Can someone please help me figure out how to set my Comments List to be Open in the Initial View. It is not an option in the Navigation Tab. I will be sending this document with Comments to other individuals and I want the Comments List to be Open when they view the document.
I have already set the document to "Restore Last View", but that only works for me not to the people I send it to.
Any help you can provide will be greatly appreciated.
Thanks!

Add following as Document-level script:
app.execMenuItem("ShowHideAnnotManager");

Similar Messages

Help! I need the Comments List to Open in Initial View

I have Adobe 8 Professional. I want the Comments List to be set to Open on Initial View, but the Navigation Tab does not have this option. Is there any way to get this setting?
I have Preferences set to open to "Restore Last View", but I think this only affects my settings not the people I send it to.
Thanks in advance.

You are not posting a feature request, but a question on how to to something. You have posted in the wrong forum. Please repost in the Acrobat Mac or Windows forum.

Suggession and help is needed(make your knowledge open sourse)

i have devoloped the application voice Chat using JMF
the main idia used is
let us take two user user1 and user2
1.user1 gives the request to user2 asking for the voice chat
2.if user2 says yes then get the IP user1 and user2 are given to the both of the user
3.now voice stream of the both users are transmitted to each other using these ip
this working fine in the LAN
i very much worried will it works on the internet
i mean ip to ip transmittion?????????????
please give some suggession
make your knowledge open sourse

just try it.

Help! needed with behaviors - iFrames (open URLs and rollover images)

I'm able to target an iFrame and open a series of images from text link numbers on same page.
But I'm not able to simultaneously target another smaller iFrame and have a thumbnail of the same image load
when the full size image loads in the full size iFrame,
nor can I get a rollover image to load in the smaller thumbnail iFrame when I mouseover the text link numbers.
I have nav link mouseover images on the same page, so I numbered the thumbnail mouseovers consecutively after the navbar mouseovers.
Previously, thumbnail mouseovers had been numbered beginning with Image1 like my nav bar mouseovers,
and thumbnail images would load in my nav bar,
but now they won't load at all.
Suggestions?
See - http://dstall.com/ld/products/priest/byzantine/

OK, I got swap image to work for both images, but it's still not doing what I want.
See 1, 2, 3 under 'Accessories' in left div - http://dstall.com/ld/products/accessories/
Mouseover of each number loads appropriate thumbnail AND full size image.
I want mouseover to only load thumbnails, then on mouseout, load thumbnail corresponding to full size image that is currently loaded.
When clicking on a number, I want corresponding thumbnail and full size image both to load and to remain loaded.
Please check/correct my source code.
Here's how I constructed swap image -
I highlighted my text 'number', entered placeholder link (#), left 'target blank', selected onClick, then SwapImage behavior -
SwapAction then appears next to onMouseOver even though that's not where I had applied the behavior.

*Please Help!* Comment List Won't go away...

I have Adobe Acrobat 8.0 PRO and I added a comment to a certain part of the forms I made because when a client goes to a certain part of the document I want them to see I comment I made about a certain part of our document. The problem is every time the program starts the "Comments list" pops up. I can close it manually each time but I don't know why it remains open every time I open the file. I don't know what to do anymore. I have spent too much time trying to figure it out...if anyone can help I would appreciate it! Thanks again in advance :)

Do a save as after hiding the comment list. Please continue this thread
if needed in the Acrobat forum, not the Reader forum. The Reader app
cannot re-save changes in pdfs.
Mike

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Can anyone help me find a list of the ESSENTIAL drivers I need for a Toshiba Satellite A665-S6065?

Long story short: My Toshiba Satellite A665-S6065 won’t boot.
♥ I tried the Microsoft Windows 7 x64 Home Premium Recovery Disk.
♥ I tried the Toshiba Windows 7 x64 Home Premium OEM Recovery Environment
♥ I tried turning off the computer & holding down “0” until it beeps & enters the Recovery Partition.
♥ I tried turning off the computer & F8 to enter the Recovery Partition.
I've tried everything that anyone has told me to do...
So I “acquired” a Windows 7 x64 Home Premium OEM & tried to install from scratch when the message “No drivers found. Please insert/search for drivers to install before proceeding” came up or something close to that.
I need to reinstall Windows 7 x64 Home Premium OEM and the OEM disk I have isn't Toshiba Specific so it is asking for Drivers in order to install. Can anyone help me locate a list of the SPECIFIC DRIVERS I need to just get the OS in?
I've been to the Download Page for Satellite A665-S6065 but there are so many duplicate drivers, I'd be downloading all night!
[admin edit for Terms of Service violation]

The system is under warranty.
Send it in for repair.

This website is driving me crazy. All I need to do is to contact a real body for help that is not listed.

This website is driving me crazy. All I need to do is to contact a real live body for help that is not listed.
This shouldn't be that difficult. GRRRRR

Post DETAILS about the help you need here and someone may be able to help... some questions to get you started
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?

TS4185 I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed. It's a good idea to have your location setting on automatic. Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location. Do this even though you have the correct time Date settings displayed.

HT4061 My iPad needs a code to open. I can't remember that code...help!!? a

My iPad needs a code to open...I can't remember the code...can you help? alice

If you can't remember the passcode to unlock your iPad then see if this page helps you reset the iPad : http://support.apple.com/kb/HT1212

HELP -- Not seeing comments

I'm running Acrobat 8.1.2 on a G5 1.8 Dual with OS 10.4.11. I have Enfocus PitStop Professional 7.22 installed.
When I add comments or open a file with comments, I do not see them displayed. They are in the comments list; and if I summarize comments, I see them in the summary pdf/printout. It's almost as if I have something switched off, but I can't find it. It's possible this is related to PitStop install, since that's what's unique on this machine. Other machines display the comments just fine.
Any help would be appreciated.

In RoboHelp 7 tables were created using inline styles. Things changed in RoboHelp 8 when CSS driven tables were introduced. You can use one of the supplied styles, you can edit one of them to create your own style or you can create a new one. There is some more information about this in the RoboHelp Tour on my site.
Once you have a style set up, you can change your existing inline tables to CSS driven tables. Right click in a table and select Table Styles. You will then get a dialog enabling you to pick a table. Tick the box to clear the old inline styling. Note that you will need to reapply any table / column widths. They will look good in the Design Editor but not in a browser.
I suggest you make a copy of the project and play around with that until you have got things working as you want.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I need a list of all the organizational units, sub organizational units,

I need a list of all the organizational units, sub organizational
units,and their security groups which are present in all sub OUs

Hi,
There are lots of way to export OU, Sub OU and Security Group.
1> Open AD console > run query > export with CSV file.
2> Run “CSVD” command as per your requirement.
3>Download Manage Engine Software > Install to any computer of Domain member > Set credential for domain controller access > Export the customized information, as per your requirement with XLS, PDF,
CSV or Ect.
3rd option is very easy to export customized reports
Deepak Kotian.
MCP, MCTS, MCITP Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS"
with no warranties or guarantees and confers no right

Why do comments in comments list disappear when file is saved after a signature is added?

When working with a workpaper file we are using sticky notes, highlight, adding text to annotate a file. Then later we go back and add "place initials" by things that we verify either have been done or the workpapers support that statement. Upon saving the file before adding the initials the file name is XXXX.pdf and the 110 comments I've made in the file are listed in the comments list. Then when I add my initals the file name changes to XXXX-signed.pdf and the 110 comments I've made are still present, but not viewable in the comments list nor when I click on the sticky note is the information in the note viewable. Why would this information disappear? How do I get it back?
If there is no fix for this Adobe...this is a great reason for my bosses to decide not to spend the thousands of dollars it's going to cost us to buy and implement your software throughout our firm. We need to retain the comments on a workpaper file as well as be able to inital and sign our workpapers. Many people work in a single workflle and putting our intials next to an item tells the reviewer that not only did we see the comment from the client, but we also double checked to make sure the inforamtion was input into the system and included in the workpapers farther back in the file.
Any help from the user community would be apreciated.
Tanya

I replied to this with a hacky solution over at Stack Overflow: http://tinyurl.com/ybwjfeg
I would prefer that this is resolved via a bug fix, because it certainly appears to be a bug.

How to create and add a new panel(under commenting list)?

Hi,
I'm basically a vc++ developer and new to this acrobat X.
My requirement is to add a new subpanel under the commenting list.(Toolpane(right hand side)-> comment->commentinglist))
I'm unable to find the soultion.Please help me in this.
regards
lavanya

Is the class public (“public ref class MyUserControl”) and did you open the Form Designer before checking the toolbox? The user controls should appear automatically after rebuilding the solution.

List of Open Sales Orders

Hi All,
        I am in need of a report to display list of open Sales orders, Requirement Date or Requested Delivery Date and Requirement Qty for given Materials (Multiple Input) and Plant.
Please guide me, Is there any Standard Report Available to display the above information except VA05.
                                                        Or else
Please guide me, the list of tables to fetch those information.

Did you try in VA05N ?
How ever , you will not get the requirement date oir requested delivery date here .You can get only Document date or creation date .
I suggest you to try to build a report with the below SAP field and data element :
       VBELN       VBAK-VBELN,     "SALES ORDER
       POSNR       VBAP-POSNR,     "ITEM
       MATKL       VBAP-MATKL,     "Material Group
       AUART       VBAK-AUART,     "ORDER TYPE
       AUDAT       VBAK-AUDAT,     "ORDER DATE
       BSTNK       VBAK-BSTNK,     "CUSTOMER PO NO.
       BSTDK       VBAK-BSTDK,     "CUSTOMER PO DATE
       WAERK       VBAK-WAERK,     "Currency
       PSTYV       VBAP-PSTYV,     "Sales document item category
       ZMENG       VBAP-ZMENG,     "TARGET QTY.
       KWMENG      VBAP-KWMENG,    "SO QTY
       OPENQTY     VBAP-KWMENG,    "OPEN QTY
       LFIMG       LIPS-LFIMG,     "DELIVERY QTY
       LFIMG1      LIPS-LFIMG,
       SHKZG       VBRP-SHKZG,
       NETPR       VBAP-NETPR,     "UNIT PRICE
       NETWR       VBAP-NETWR,     "NET VALUE
       BALWR       VBAP-NETWR,     "NET VALUE FOR BALANCE QTY.
       BALLOC      VBAP-NETWR,     "BALANCE VALUE IN LOCAL CURRENCY
       KURSK       VBKD-KURSK,     "EXCHANGE RATE
       FPLNR       VBKD-FPLNR,     "BILLING PLAN NO.
       FKSAF       FPLT-FKSAF,     "BILLING STATUS
       LOCVAL      VBAP-NETWR,     "AMT. IN LOCAL CURRENCY
       KUNNR       VBAK-KUNNR,     "CUSTOMER
       VKORG       VBAK-VKORG,     "SALES ORG.
       VKBUR       VBAK-VKBUR,     "SALES OFF.
       VDATU       VBAK-VDATU,     "Req.Del.Date
       MATNR       MARA-MATNR,     "MATERIAL NO
       ARKTX       VBAP-ARKTX,     "MATERIAL DESC
       WERKS       VBAP-WERKS,     "PLANT
       LFSTA       VBUP-LFSTA,     "Item Delivery Status
       FKARA       TVAK-FKARA,
       GBSTA       VBUP-GBSTA,     "Overall Status
       FKSAA       VBUP-FKSAA,     "Item billing statuS
       NAME1       KNA1-NAME1,     "CUSTOMER NAME
       VBTYP       VBAK-VBTYP,     "Doc. Category
       LFARV       TVAK-LFARV,     "Delivery type
       LIFNR       LFA1-LIFNR,     "Vendor Number
       SPSTG       VBUK-SPSTG,     "Overall blkd status
       COST        KONV-KWERT,     "COST
       DISC        KONV-KBETR,     "DISCOUNT
       SPRICE      VBAP-NETWR,     "SELLING PRICE
The above field are similiar kind of report .But I feel you have to keep two opetion one will be Open Sales Order and other All the sales order .Discuss with your abaper in this regard in line with VA05N and VA05
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 20, 2010 9:07 AM

Help! I need Comments List to Open in Initial View

Similar Messages

Maybe you are looking for