Help!!! I need help with how to update an itouch 2.2.1 to 3.1.2
I want to update my itouch from 2.2.1 to 3.1.2 instead of 3.1.3 i really dont like the 3.1.3 versioin :(((
Apple does not offer 3.1.2 for download any more, so if you wanted it, you could not get it legitimately. Maybe from a 3rd party, which you should use Google for.
Why not 3.1.3? It works without problems for almost everyone.
Similar Messages
-
How to update my itouch 4th gen?
Hi. Can you help me how to update my itouch 4th gen?
It can't be updated past 6.1.6; iOS 7 requires at least 512MB of RAM.
(107567) -
need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks
Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.
Are you sure it's a 3GS? What is the model number?
-
i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??
See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Hi, I need help on how to update software for my ipad1, can someone help me?
The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Help with Adobe Reader update installation on mac book pro
am trying to update adobe reader 9.4.6 to the latest version on my mac book pro. Am able to download the updtae to 10. whatever and proceed with installation. At the step where I am asked to choose the adobe reader file, I select the file and then the process stops and I get a message that installation has failed and i am to contact the software manufacturer.
I figured it out. Thanks!
The key, during both life and death, is to recognize illusions as illusions, projections as projections, and fantasies as fantasies. In this way we become free.
Date: Mon, 10 Sep 2012 04:54:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with Adobe Reader update installation on mac book pro
Re: Help with Adobe Reader update installation on mac book pro
created by Nikhil.Gupta in Adobe Reader - View the full discussion
How exactly are you trying to update your Adobe Reader 9.4.6Try the following link to download latest Adobe Raeader: http://get.adobe.com/reader/
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4686315#4686315
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4686315#4686315. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Need to know how to update my iphone 4 to ios5 have downloaded the update already
I have tried to update my iphone with itunes but when it gets to the end of the down load the message I get is server session timed out
so iave downloaded the the update in safari and need to know how to update from thereWhat itunes is asking is would you like to import the files and settings of your ipod to your iphone? It'll import things like contacts, calendar, mail, apps with app data. If you want your phone set up just like your ipod then use that option. Otherwise pick "set up as a new device" and it'll allow you to keep the two seperate and you will be able to sync them both to your itunes independently of each other.
-
can anyone help me update my software for a blackberry curve 9300. i need to updat the core applications and the system software but i dont know how to do so. do i do it by my desktop or device
Hi and Welcome to the Community!
The simplest way is this:
KB16068 How to update the BlackBerry Device Software through the web
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
NEED HELP WITH IOS 6 UPDATE!!! PLEASE.
I have an 8GB iPhone. The iOS 6 update says that I need 2.4GB available to update. I deleted all of my apps, 200 pictures out of 400 plus videos. It says only 5.1GB are used but it won't let me update the iOS 6. Help me please?
jayfram wrote:
I am having the exact same problem. Can't upgrade via the phone, even with a wifi connection - says I need 2.4 gb of storage, although the software is only 500 mb. I'm not about to delete everything on my phone just to update the OS.
So plug the phone into the computer that it normally syncs with and update via iTunes. -
Need help with "Nokia Software Updater"...Plz
hi
plz help me
every time i try to install
and it gave me this MSG
" Error 2738.Could not access VBScript run time for custom action."
my Lap work with W.vista
and i have N95-8GB
plz i need a help to update my phonePlease do a search on this forum for "6280 software update" and you will have your answer.
Many people have written here about Nokia software updater that tries to flash their 6280 phones with V6.10 (intended for the 6288) and then breaks their phones.
I myself was busy downloading the firmware for a friends 6280 that was just minutes away from being flashed with 6.10 when I came across messages on many sites telling about the issue with the software updater and 6280 phones. I managed to save that 6280 from sure doom.
If you also searched before hand you would not have this trouble.
You need to take the phone to a nokia Service centre to have it flashed now and get it into a working state. -
I need help with a software update problem??
I recently got a new macbook pro and I was doing a software update last night as it was required but then when it started to do the update the computer installed the software and then a barring noise came from the mac and it tried to restart 4 times before it eventually came back on. The software trying to install was Fireware 800 I think. Can anyone help with this?
Try MacBook notebook forum to talk to other users, or OS Software (Lion or Snow Leopard)
Does not sound like an Apple OS update though.
http://support.apple.com/downloads/
https://discussions.apple.com/community/notebooks
http://www.apple.com/support/macbookpro -
Help on how to update credit card?
My credit card expiry needs updating. After three days of frustrating searches, I finally got my daughter, in another state, to log me on, but then all info in the web still doesn't tell me how to update. The web is bloody useless when seeking a simple answer. Several people report the same sort of problems. Can anyone please advise ?
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.You may find this link helpful for you to update your credit card:
https://support.skype.com/en/faq/FA10486/how-do-i-update-my-credit-card-details?q=update+credit+card
Best Regards,
Akyll
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
Help with BufferedImage - Graphics updating
Hello All-
I will try to explain the best I can, still new to Java2D so little confused
Hopefully the explanation makes a little bit of sense....
I have a tabbedPane, one tab with no graphics and the other tab full of graphics
The tab with the graphics on it is basically a bunch of rectangles that will change color depending on real time data I am pulling from a Mysql DB
For sake of performance I only want to have to repaint those rectangles when the data from the DB changes (i.e. repaint the rectangles when the bit changes from 1=good to 0=bad)
Any help on how to start implementing this would be absolutely wonderful
or if I could explain something any better please ask.
Thank you in advance
JanduzerbotsIf you're thinking of just grabbing the graphics image of some component on the fly for rendering, that
wouldn't work well. Here is a link to some tips on doing your own drawing.
Again, yes, you may have to define your own component class. The only other alternative I can think of is to have a JLabel
that has an ImageIcon that holds your BufferedImage, and you update this by calling repaint after updating
the BufferedImage. -
Please help with RAID driver update.
I need a little help with updating my RAID drivers. I have P55-GD65 motherboard and some SATA2 hard drives connected in RAID arrays. I am running Win7 64bit.
I already downloaded and installed:
“Intel P55 AHCI / RAID Drivers Ver: 8.9.0.1023”
from the MSI support web page. The setup file installed the “Matrix Storage Manager” and the “Matrix Storage Console”
On the same web page I see another download link:
“Intel Matrix Storage Manager Driver Ver: 9.5.0.1037”
It looks like I already installed the manager with the previous driver. Do I need to install this one too? What is the difference between both?
Also when I open the “Intel Matrix Storage Manager Driver Ver: 9.5.0.1037” I see 2 executable files:
“iata_cd.exe” and “iata_enu.exe”
I read the “Readme.txt” provided, but I couldn't find information on what is the difference between the EXE files and which one I should use.Quote
I read the “Readme.txt” provided, but I couldn't find information on what is the difference between the EXE files and which one I should use.
Use either one. It doesn't matter in a functional way.
Maybe you are looking for
-
User Created in OIM 11.1.1.5 with null value for mandatory field.
Hi, We had updated one UDF as mandatory field on OIM user form. We can see the * in front of that field. Now if we create the user using web console (Using UI), we are not able to create the user without giving some value in that UDF as it is mandato
-
How to automatically modify the Infopackage QM status in a process chain?
We have a process chain that automatically load data to Infocube 0IMFA_1 (The Business Content IM Cube). In this chain we have Infopackage 0CO_OM_OPA_1; this Infopackage has a particularity that remains in a yellow status because it looks for CO orde
-
If I use my laptop with XP, I have no problems. I also can login on my son's computer that is running Vista premium. What is the problem?? I have tried disabling add ons, virus software, defragging, disk clean up, clearing history, cookies, cache.
-
Hi I would like to perform a unicode conversion of our Solution manager instance. The current version of the database is 7.6.6.6. Can I use the command db_migratecatalog or do I have to perform a homogeneous Migration? The instance was migrated from
-
IdM dispatcher is down - where/how to check the cause?
Hi IdM friends, I am supporting a IDM customer and its IdM production dispatchers was stopped 3 - 4 times this month. When the dispatcher is stopped, I am able to restart it without any problem. I have also setup another dispatcher on the same server