Help, I need my older PowerMac configured to work with my Airport Extreme
So, I have a powerbook laptop that works perfectly with the Airport Extreme that I just bought. However, I also have an older desktop that technical support told me was decided obsolete(even though it runs on tiger,10.4.9!) and they refused to give assistance to configure it to the airport.
My modem only has one ethernet port. Theoretically, you can use the extra port on the airport extreme to connect, via ethernet cable to the desktop(because it has no airport card.)
Does anyone know how to configure my PowerMac G4(model 3,5 serial number xb1381c2ksd) so that when it has it's ethernet cable routing through the airport extreme to the modem, the internet will connect?
Thank you
Steph_D., Welcome to the discussion area!
Configure the PowerMac G4 to use Ethernet and DHCP to get an IP address. That is all you need.
Similar Messages
-
Can older Airport Express work with new Airport Extreme?
I had an older airport base station (dome shaped) and I was extending it with an Airport Express. I didn't need extra range, it was so I could play my iTunes from my laptop through my home speakers (or use my iPhone to do the same). Now I bought one of the newer flat Base Stations but I can't seem to get it to hook up to the old Express so I can still play my music. Do the old Express's not work with the new base stations?
And if not, is there any other way for me to be able to play music wirelessly to my home stereo from my mac and iPhone/iPods, like I was able to do before?Im thinking my Airport Express has failed. I tried hard resetting it several times and I can see it through Airport utility, nor my iPhone. The iPhone sees it, but it cannot set it up.
Looks like I need to get a new Airport Express no matter what. Ive had it for a Looooong time. So I guess its number was finally up.
Thanks for the response seancobrien. -
I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.
This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster. -
Basically had APxtreme working with fiber optic in Japan, got to the states with Docsis(cisco) modem and my APxtreme doesnt work now. Tried forever, and it just didnt work, I had a yellow light for internet on airport utility with a green light for the APxtreme? Still nothing workey....
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.
Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?
You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894) -
Help setting up Open DNS with new airport extreme
I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?
Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode. -
My cc was ugraded to cc2014 and now i've 2 version adobe cc and cc2014, may i withdraw the older version? i work with win7.
and why when i installed adobe cc in january 2014 it installed two version 32 and 64 bits?
Thank you very much for your help?http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671 -
Recovery and Applications CD not configured to work with this machine.
Satellite A215-S4757
Machine trashed due to virus and want to reset to original configuration. Using disk 1 of 2 labeled RECOVERY AND APPLICATIONS/DRIVERS SATELLITE A210/215 SERIES WINDOWS VISTA HOME PREMIUM 32 BIT. When the CD boots an error is displayed. The error reads:
"This Recovery and Applications CD is not configured to work with this machine (*).
This CD is for: Satellite A215, Satellite A210
Please use the correct Recovery and Applications CD."
Can you tell me why this is not recognizing the machine correctly? Thanks for the help.
R/JimSatellite A215-S4757
You need the utility which resets the DMI string for that model. Call Toshiba tech support at 800-457-7777.
-Jerry -
I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?
What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606 -
Sky Hub (SR101) configured to roaming network on Airport Extreme?
Hi,
Im trying to find out if it is possible to connect a Sky SR101 Hub to a Airport Extreme to create a roaming network with 3 Airport Extremes?
If so is the procedure of connecting it as follows:
1. Sky Hub ethernet port connected to WAN port of 1st Airport Extreme
2. Ethernet Cable from the 1st Airport LAN port to the WAN port of 2nd Airport (in another room)
3. Ethernet Cable from the 2nd Airport LAN port to the WAN port of 3rd Airport (in another room)
What is the best way for the DHCP?
Do I set the 1st Airport that is connected to the Sky Hub do the DHCP and turn the Sky Hub wireless and DHCP off?
I am a bit confused when it comes to the DHCP side.
Thanks for your help in advance.The Sky SR101 is a modem/router that provides both DHCP and NAT service.
So, in a "roaming network" configuration, each one of the AirPort Extremes would be configured to "create a wireless network" using the exact same wireless network name, same security setting and same wireless password as the Sky modem/router. Each AirPort must also be configured to operate in Bridge Mode.
Here, I am assuming that the Sky SR101 will be creating a wireless signal. Optionally, you could turn off the wireless on the Sky modem/router and use it only as a wired router if you prefer. In this case, the 3 AirPorts would be providing your wireless network.
1. Sky Hub ethernet port connected to WAN port of 1st Airport Extreme
2. Ethernet Cable from the 1st Airport LAN port to the WAN port of 2nd Airport (in another room)
3. Ethernet Cable from the 2nd Airport LAN port to the WAN port of 3rd Airport (in another room)
This will work, but better wiring practice.....if possible.....would be to connect each AirPort directly back to one of the Ethernet LAN <-> ports on the Sky modem/router. This is called "home run" wiring.
The reason for this is that your proposed setup makes use of what is known as a "daisy chain" configuration.
While the "daisy chain" type of setup will work....if everything is working.....let's say that you configure the network as proposed in 1), 2), and 3) above.
If the 1st AirPort Exteme has a problem, it will take out AirPort Extreme 2 and AirPort Extreme 3 as well. Or, if AirPort Exteme 2 has a problem, it will take out AirPort Extreme 3 as well.
With the suggested method of connecting each AirPort directly to the Sky modem/router in a "home run" wiring configuration, you might have a future problem develop with any given AirPort, but this will not affect the operation of the other AirPorts.
As far as DHCP and NAT service, it might be possible to configure the Sky SR101 to operate only as a modem with DHCP and NAT functions disabled.
But, even if you can do this, your service provider may not support this type of setup, so you would want to check with Sky first to see 1) If this is possible, 2) How to do it, and 3) Verify that they will support that type of configuration.
If you decide to go this route, then AirPort Extreme 1 would be configured to provide DHCP and NAT service. AirPort Exteme 2 and AirPort Extreme 3 would still both be configured in Bridge Mode. In this case, you would connect AirPort Exteme 2 and AirPort Extreme 3 directly to AirPort Extreme 1. -
Hello,
I purchased a new Airport Extreme at the Apple store today and have it connected with a new Zoom 5341J. ISP is Comcast. I hooked everything up and I do have a solid connection....however my 2008 MB pro and iPhone 6 are maxing out at 30mbps on wireless. I had over 100 mbps hardwired. Its weird because it stops right at 30mbps during OOKLA speedtest. Something isn't right. I am hooked up to 5 ghz at channel 161.
Any suggestions?thanks for all of the help!!
Nevermind I figured it out myself. The zoom modem I was using is not compatible to VOIP, so I just went back to my technicolor and put it in bridge mode with the airport extreme and I am now getting 130mbps+ both wired and wireless.
Thanks! -
Can anybody help me to build an interface that can work with this code
please help me to build an interface that can work with this code
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate
public static void main(String [] args) throws IOException
if (args.length != 2)
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
HashMap map = null;
try
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null)
String[] fields = line.split("
t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
finally
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
StringBuffer out = null;
try
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null )
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
finally
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text)
Iterator it = words.keySet().iterator();
while( it.hasNext() )
String key = (String)it.next();
text = text.replaceAll("\\b"key"
b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello ahoy
hi yo-ho-ho
pardon me avast
excuse me arrr
yes aye
my me
friend me bucko
sir matey
madam proud beauty
miss comely wench
where whar
is be
are be
am be
the th'
you ye
your yer
tell be tellin'please help me i don t know how to go about this.my teacher ask me to build an interface that work with the code .
Here is the interface i just build
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
import java.awt.*;
import javax.swing.*;
public class boy extends JFrame
JTextArea englishtxt;
JLabel head,privatetxtwords;
JButton translateengtoprivatewords;
Container c1;
public boy()
super("HAKIMADE");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setBackground(Color.white);
setLocationRelativeTo(null);
c1 = getContentPane();
head = new JLabel(" English to private talk Translator");
englishtxt = new JTextArea("Type your text here", 10,50);
translateengtoprivatewords = new JButton("Translate");
privatetxtwords = new JLabel();
JPanel headlabel = new JPanel();
headlabel.setLayout(new FlowLayout(FlowLayout.CENTER));
headlabel.add(head);
JPanel englishtxtpanel = new JPanel();
englishtxtpanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,40));
englishtxtpanel.add(englishtxt);
JPanel panel1 = new JPanel();
panel1.setLayout(new BorderLayout());
panel1.add(headlabel,BorderLayout.NORTH);
panel1.add(englishtxtpanel,BorderLayout.CENTER);
JPanel translateengtoprivatewordspanel = new JPanel();
translateengtoprivatewordspanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,40));
translateengtoprivatewordspanel.add(translateengtoprivatewords);
JPanel panel2 = new JPanel();
panel2.setLayout(new BorderLayout());
panel2.add(translateengtoprivatewordspanel,BorderLayout.NORTH);
panel2.add(privatetxtwords,BorderLayout.CENTER);
JPanel mainpanel = new JPanel();
mainpanel.setLayout(new BorderLayout());
mainpanel.add(panel1,BorderLayout.NORTH);
mainpanel.add(panel2,BorderLayout.CENTER);
c1.add(panel1, BorderLayout.NORTH);
c1.add(panel2);
public static void main(final String args[])
boy mp = new boy();
mp.setVisible(true);
}..............here is the code,please make this interface work with the code
public class Translate
public static void main(String [] args) throws IOException
if (args.length != 2)
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
HashMap map = null;
try
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null)
String[] fields = line.split("
t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
finally
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
StringBuffer out = null;
try
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null )
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
finally
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text)
Iterator it = words.keySet().iterator();
while( it.hasNext() )
String key = (String)it.next();
text = text.replaceAll("\\b"key"
b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello ahoy
hi yo-ho-ho
pardon me avast
excuse me arrr
yes aye
my me
friend me bucko
sir matey
madam proud beauty
miss comely wench
where whar
is be
are be
am be
the th'
you ye
your yer
tell be tellin' -
I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac????? Help
Return it.
The requirements are on the box and on the website:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download fromwww.itunes.com/download)
iTunes Store account
Internet access
http://www.apple.com/iphone/specs.html
Maybe you are looking for
-
I need help with BlackBerry 8820's bluetooth issue
Hi! Please accept my appology of my poor English. My 8820 has a bluetooth issue with Bluedio E9+ headset. It must be note that the headset works well with another phone (not BlackBerry). My BlackBerry can't actively connects to bluetooth headset by t
-
My iPhone 5 was stolen from me in a train station, the phones battery was dead, the iphone hasnt bee turned on yet, everytime I call it it rings once and goes to voicemail which tells me that it is still dead, nobody has charged it nor turned it on y
-
How to import all Support Packages simulteneily support Package Manager EBP
Can any body tel me how to apply all support package sumultanesoly by using support Package Manager EBP/CRM option in SPAM. I could not able to select all pactche at a time.It selecting one patch at a time only Regards G Sasikanth Reddy
-
How to get the Attributes of the UNIX file Directories ?
Hi Guru, How to find of the Attributes of the UNIX file Directories in sap TC :- u2018 *ZZWT*u2019 . The file attribute details need to show in the report. I try on FM : EPS_GET_FILE_ATTRIBUTES /SDF/GET_FILE_INFO But not get
-
Can't get lookup column filter to work
I have a backlog list (list 1) that is essentially a backlog of reqs. I also have a task list (list 2) that is tasks tied those reqs. In this second list, I have a lookup column where user can select from the list of reqs. I then pull in two addi