Help - I need to change my user log in name

Hello
Please help been om this two hours now!!! I log in to itunes with an email address which is no longer im use with hotmail. I want to change it to my yahoo one which I use all the time BUT the yahoo one is the email address I use as the secondary itunes email so it wont allow me change. Please can anyone help? thanks

No,  it is not possible.   Only way to change is to disconnect service completely. and reconnect again. you may experience downtime. but at least you will be able to change VZ username.  or create a sub-account from your primary account.

Similar Messages

  • In R12 how to change concurrent output/log file name prefix?

    how to change concurrent output/log file name prefix?

    but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
    Thanks,
    Hussein

  • User password will need be changed when user logon

    Why users need to change the password once I setup when they have been assigned by superuser?
    If that is the case, then should I just assign any 4 digits then they put the real password when they log on or they can reuse the same password that I created.  Only use 4 digits to avoid need to change it couple months.

    Hi Lily,
    Did you check the settings under
    > Administration > Setup > General > Password Administration?
    Here you can set different settings for example if it is possible to use the same passwrod as before, when it will expire and so on.
    Hope that helps.
    Kind Regards,
    Friederike Mundt
    SAP Business One Forums Team

  • Need to change OTN user account email id

    How can I change my OTN user account email id. This email is very old, I need to change it to my new one. Please let me know, email me at [email protected]

    Mahantesh,
    You need to maintain relationships between trusted/trusting system for the remote user.
    If the user U_1 has to work under client M_1 in the Trusted System C00 under the user U_2 with the client M_2 in the Trusting System S00, using a Trusted/Trusting relationship, then the user(U_2,M_2) must have an authorization object S_RFCACL in System S00 with the following properties:
    RFC_SYSID : C00
    RFC_CLIENT: M_1
    RFC_USER  : U_1
    RFC_EQUSER: N
    RFC_TCODE : *
    RFC_INFO  : *
    ACTVT     : 16
    Check note 128447.
    Hope it helps..
    G@urav.

  • How do I change the user log in screen background on Lion?

    Note:I'm talking about the screen for Users Log where multiple users log in.
    Right now the default is a solid grey. there has to be a way to change it to something more esthetically pleasing.

    Look for a previous entry in this group
    "Lion Default Login Window"  It was back around August 2nd or so.
    There may be a better way than is listed in that thread but so far I haven't found it but I have been tied up with other Lion problems and have not really looked much further on the default login window issue.

  • I need to change my user name

    You can't change username.

    helenvito wrote:
    Hi, has this issue been resolevd yet of not being able to change user name? A friend of mine set up my account years ago but I need it changed!! Alternatively, is it possible to set up a new account and copy over all lists and then cancel mine?
    Hey! Welcome to the community :) 
    There is still no way to change your username or disconnect an account from Facebook if it was created that way. 
    You can use the instructions I outline in my disconnecting from Facebook tutorial, located here to copy your playlists from one account to another. 
    Peter

  • Please help, urgently need to change DD payment Da...

    I really do not know If I am asking the right person or even whether I should be posting as new to BT but I am in trouble and need help. I have joined BT and have BB and phone, and am well pleased with it. My problem is that I am going to have my direct debit taken on 8th of the month and I desperately need to change this to the 15th  due to my salary arrangement. I can see issues each month. I know i need give 7 days notice so really need help asap. Many thanks in advance

    If you would like to try Live Chat they should be able to help you.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Best Practice: changing a user's short name?

    I administer the OS X Servers and user accounts at my school, where typically a few teachers will come back from the summer having gotten married and changed their names.
    We use a standard for usernames of first letter of first name and last name, where Ann Smith is 'asmith' - when she goes and gets married and wants to be 'ajones' at the beginning of this year, what is the best way to go about this change?
    Users have network homes, and IMAP email is on a separate server. Here is what I was thinking:
    For the user's files, make a new user with their new username, 'ditto' the contents of the old username's home folder to the new username, and chown/chmod the new folder's contents to match the correct permissions.
    For the user's mail, use SirAdmin to add ACL's to the old username's mail folders to be able to read them as the new username, have the new username set up their mail and copy the contents of the old username's mail to their new IMAP folder(s).
    Does this make sense or is this far too complicated?
    Do I just tell these users to log in using their old name and burn their essentials to a DVD and just worry about helping them with their emails?
    Any and all suggestions would be appreciated -- thanks
    BC

    Hi Blair
    These look like good methods to me and should work. You could consider creating a second short name - something suitable like their first name instead? Enable Mobile Account (PHD) for the affected users and log in using that short name. Their account should now be created locally as well.
    If you have only a handful you could use a spare machine to do it with yourself? More on this later.
    If you these users have IMAP accounts you could enable POP for them as well. As you/they log in to download from the server their current home folder their mail should be downloaded also.
    What you have after that is effectively a back up of their home folders and mail kept locally on a client machine or a designated machine you decided to use. Delete their account, create the new long and short names, create the additional short name (exactly as it was before), log in with those details and upload the locally stored information back to the server. There should be no need to worry about permissions etc.
    What you could do is send an email to the affected users outlining the steps they need to take to achieve what you want. Minimal effort with maximum gain.
    When you are happy kill the mobile account option as well as deleting the additional short name. Send another mail advising they use the first short name for logging in. There'll be a little tidying up to do in deleting the locally created home folders but you can do this at your leisure using VNC.
    I would have in place one of the other methods as well - just in case.
    Tony

  • Help. My daughter changed my iPhone 4 contact names!

    As a joke, my daughter changed all my iPhone contact names to "horse".  Yea, funny!  How do I get them back? I'm worried if I sync with my contacts on my Mac that is will change them to "horse" as well.  Is there an easy way to correct this? It took her two hours to do this behind my back! lol.  Thanks!

    Open iTunes and plug your iPhone into the computer but cancel the sync! very important.  Then click on your iPhone in the left box, then click the info tab, scroll to the bottom of the window to the advance section and select contacts in the check box.  Read the note under this section it will tell you that information on this iPhone will be replace with the information on this computer. Then put your daughter on time out!  LOL...

  • Need to change IP address and host name on a ORACLE 10g RAC setup.

    Hi Forum,
    I have a task to change the IP address, host name and host related details for the ORACLE 10g RAC 2 node setup. So Can anyone tell me the procedure to do the same on both the nodes.
    Regards
    Prakash

    change IP Address Public + VIP + Interconnect
    http://surachartopun.com/2007/01/i-want-to-change-ip-address-on-oracle.html
    change VIP name
    http://surachartopun.com/2009/01/change-vip-hostname-on-oracle-rac.html
    If you'd like to change HOSTNAME... Metalink (NOTE:220970.1)
    Can I change the public hostname in my Oracle Database 10g Cluster using Oracle Clusterware?
    Hostname changes are not supported in Oracle Clusterware (CRS), unless you want to perform a deletenode followed by a new addnode operation.
    The hostname is used to store among other things the flag files and Oracle Clusterware stack will not start if hostname is changed.
    Changing the Private Interconnect
    o Change of the IP Address: change the IP address in the hosts file and/or DNS and make sure that ASM and the database also use the same interconnect
    o Change of the private node name used by Oracle Clusterware: requires a reinstall of Oracle Clusterware
    So, Public or Private hostnames can only be changed by removing/adding nodes, or reinstalling Oracle Clusterware. VIP Hostnames can be changed
    But you can read this idea (reinstall CRS)
    http://www.pythian.com/news/482/changing-hostnames-in-oracle-rac
    http://surachartopun.com/2008/12/change-hostnames-oracle-rac.html
    Edited by: Surachart Opun (HunterX) on Oct 25, 2009 10:58 PM

  • HELP ! Need to change video size in project sequence...

    When creating a project last month I accidently created it as 1280x960 in the sequence settings, but meant to create it as a 1920x1080 which is what all the video clips are in size. Now I have this nicely edited project but need to convert it to a 1920x1080 in the sequence settings so I can export it as that size. When I go into the sequence settings now this option is grayed out and it won't let me. I have read many forums and they say it’s as simple as creating a new sequence with the right settings and importing the old sequence but when I do this it is still as 1280x960. So my question is other than re-editing this entire project, how can I take this current project with sequence settings as 1280x960 and change the video size to 1920x1080 (Which is what the video clips are originally and when I right click on the individual videos it says 1920x1080). PLEASE help, I am using PP CS5 !!! This is so frustrating !

    Create a new Sequence with the settings you prefer,
    then Copy > Paste the clips into the new Sequence.
    Be sure that your Sequence settings match your footage by doing this:
    Or, right-click a media file and select 'New Sequence From Clip".
    How do I choose the right sequence settings?
    http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
    note:
    You may need to re-create audio effects that you applied in the Mixer
    in the first Sequence, or you can use your first Sequence as a mixed,
    nested audio track for the new properly configured Sequence.

  • Help Required - Need to add current user as superuser

    Is there a way to add my user account to the superuser group in Solaris 10? I need to install some pretty heavy software which involves unpacking and repacking war files so would like to be superuser throughout. I am using a VM and am not concerned with security as it has no network connections and is host only.
    Any advice appreciated as I am a complete newbie - lol!

    While it is truly a bad idea to do this, it is possible. The safest way is to use sudo. The easiest (and worst, most dangerous way) is to change the UID and GID in /etc/passwd to 0 (same as root) for your account. If you do this, and I urge you not to do it, don't forget to change them back to the original values when you are done. It is too easy to be in the wrong directory as root and do a rm -rf *. That simple mistake cost me most of a Sunday fixing the damage years ago. And I'll bet I'm not the only one to screw up like that.
    In deference of this response, its a learning thing. The OP should know what UID and GID can do so as not to spend a day off in the office fixing mistakes. I blew out the entire /etc directory tree when I was a young pup who thought he knew it all.
    --ron                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • HT4314 Game center : I need to change my user name to another name when I use games with apple

    Your support needs in this situation

    Chaging your user name is easy. I can see you haven't upgraded to ios7, but that is okay.
    Go to the gamecenter app> click your email> sign in> and scroll down until you see your user name> Then you can cahnge it from there.

  • Help is needed in Sales order User Exits

    Hi
    Please Can anybody show the solution to my problem.
    My problem is:
    Using Table having 2 columns(Customer,Route), we have to display Route(present under shipping tab in Sales Order) in Sales Order. Route has to be displayed based on the customer present in the table.

    hi,
    Please try table VBFA with fields VBELV = <sales order> and VBTYP_N = 'J' (Shipping/Delivery).
    and also try this also
    if you know delivery number for order ,then you could use FM VTTP_READ
    if you need delivery number from sales order then use VBAP-VGBEL
    pass delivery number to FM or pass the value to VTTP Table
    thanks,
    <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

  • I need to change my user name to another name when I use games with apple

    Your support is highly needed

    Chaging your user name is easy. I can see you haven't upgraded to ios7, but that is okay.
    Go to the gamecenter app> click your email> sign in> and scroll down until you see your user name> Then you can cahnge it from there.

Maybe you are looking for