Help! I "optimized video" to "original full size" and...

Hy. I optimized video to original full size, because when I rendirize the project the video was being cut, the head of the caracter was being cuted off. I couldnt understand why. I duplicated the project and try optimized it.
I cant believe it. I failed deeply. Now the original video in the event is bad quality. Any solution? What happened?
I try to undo optimizing the video and its not available.
Any help so I can save my project and if possible the original video?
Thank you very much. Bruno

Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level.

Similar Messages

How to view images full size and then import selected ones to macbook

I want to view my images stored on external drive full size and download selected to MacBook pro

Use a photo viewer like Preview (this has nothing to do with iPhoto)
LN

Resize Video, both the file size and actual size

Hi All,
I am very new to Adobe Premiere (CS3). I have had it for a while but not needed to use until now. A client of mine has sent me a video that he wants on his website. But it’s 150M and 1280 * 720. Can anyone help me out with how I can resize both the file size and actual size to say 800 * 450 so it can stream it via the net?
Like I said very new to this,
Cheers,
Mike.

The first thing you need to do is determine just what KIND of file you were sent, so you may start a project that matches the file
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
I don't do streaming video, so you should search the help file... I **think** what you want out is a Flash file, but that is only after you know what you are going to load into the CS3 timeline

Why does my iPhone show some photos full size and some scaled?

Hi,
I have got a collection of DVDs and syncronized a folder with all cover pictures to my iPhone 5.
When looking at them with the "photo" app, some covers are shown full-size, some are
shown scaled. The scaled ones are shown at maximum height, so that I don't see the
whole cover on the 16:9 screen.
All covers are JPG having a similar size (760x1080px), with no EXIF/IPTC tags and
different dpi (tried different settings but saw no change).
Does anyone know, how the iPhone decides to show pictures scaled or not?
Thanks for a hint, regards
Christian
"full" vs. "scaled"

Text messages are green and iMessages are blue. iMessages can only be sent between Apple devices.

Help please! Video too dark to review and make clips!

Bought a new imac G5 for video editing as this was recommended by the mac store. Just captured my first short film, filmed on panasonic dvx 100B in 24pA. Not only are the day scenes fuzzy, but the night scenes are black and I can't see them to even make clips and edit! The tutorial video clips come out perfectly.
The night scenes are very clear and lighted on my camera lcd.
I tried changing video settings to high, but still can't view.
Please tell me I don't need an external monitor just for rough edititing and there is something I can do about this.
(Wondering why I spent all this $ on a new and larger monitor if I can't even use it!)
Could it be the RAM? I've got 512, or something with the 24 frame rate? It's set on 23.98 as recommended for 24p advanced.
Any help greatly appreciated!!!
thank you!

Read through these links. They describe how to calibrate a NTSC monitor. Don't worry about color yet, concentrate on the part about setting up the brightness and contrast levels first.
This link has nice illustrations and is your best bet for a quick understanding.
http://www.videouniversity.com/tvbars2.htm
Read these when you have more time.
http://www.bluesky-web.com/colorbars.html
http://www.synthetic-ap.com/tips/calibrate.pdf
Check into Graeme Nattress's G TAKE filter with the Blue channel engaged. It mimics what a blue gun setting on a pro monitor would do.
Again, unless the monitor is calibrated somewhat, the true story is not yet known.
good luck.

Adding chapters while preserving the original file size and type.

Gone are the days of easily adding chaps in FCP7. FCPX is here… chapters are gone!. Now enter Compressor 4.
When exporting from Compressor am I ultimately going to end up with an additional file with new settings?
I have followed the Compressor manual and understand that I can “Create a new batch from template” and am supposed to choose Create DVD. I however just want to keep my file in its original maximum resolution while gaining the chapter marks that will be recognized in iDVD or Studio Pro.
Can anybody offer me some advice or point me to some good resources?

Assume you're referring to Compressor 4, although the following would pretty much also apply to earlier versions.
Yes; you will have an additional file with chapter markers.
Select a preset…you can start with any of them, but Pro Res 422 makes the most sense.
If your source file (the exported Quick Time file) was PR 422, it will not change the scale and will preserve the quality of your original file (or close enough so you wouldn't be able to see the difference even with a blown up projected image). If, for some reason you a codec other than Pro Res, go to the Inspector>Encoder pane>Video Settings>Compression Settings and make your choice.
In the Preview window, set the chapter markers, which are frame-accurate in an I Frame format like Pro Res.
Submit and Compressor will spit out a high quality QT movie. You can then bring that movie into iDVD, which will recognize your markers.
If you want to use DVDSP, you have two options. 1) You can let DVDSP do the encoding by importing the QT movie with chapters. 2) You can use Compressor to encode; you choose the DVD preset (Disk Burning) and it creates separate audio and video files that you then bring into DVDSP, which will "see" your markers in these files. Most DVDSP users use the second method because they have far greater control over the compression settings…but that presumes the user is relatively familiar with Compressor and Frame Controls.
Finally, bear in mind that DVDs are standard definition, so – however you get there – the DVD will be much more compressed and much smaller resolution than any High Def format. However, the DVD end product can still look very good. Do some tests with small, but representative sections of your movie to see whether iDVD or DVDSP works best for you.
Good luck.
Russ

IWeb 08 and Photo Download Size not sticking to Original (Full Quality)

I am using iWeb 08 to post personal webpages and photo galleries but even when I select *"Original (Full Quality)"* under Photo Download Size in the inspector it slips off full size and make smaller pictures. I almost always want to offer full resolution image to my friends and family. Is there a way to make this work more reliably? Is it being fixed?

I found in this iWeb test pertained more to the image pixel dimensions than the jpg compression level of the downloadable file as you found out.
Happy New Year
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

HELP! Video in canvas is tiny and poor quality

Help me! Im about to break something out of frustration and lack of knowledge.
I started a project in FCP . Im not exactly the most knowledgeable when it comes to final cut so I didnt bother to change any of the sequence setting etc. I had a group of files, shot on a 5D mkII, which I had converted to ProRes. Looking at the files themselves in Finder, the quality was perfect. I imported the prores files into final cut and began editing my video. The files were good quality in the viewer but awful quality in the canvas. I stupidly soldiered on, thinking it was because it was just a preview. However, when i came to export it, the final result was equally as bad as in the canvas.
I tried to find out what was wrong by looking around online and found I should have adjusted the sequence settings. I changed them to 1280x1080. However, now the video is still terrible quality and also much smaller in the canvas. Strangely enough, now that I have changed the sequence settings, everytime I drag one of the prores files onto my timeline, it appears full size and good quality on the canvas. All the stuff before it on the timeline is small and poor quality still. also, dragging prores files onto the timeline, it is now needing to render them before they will play.
Is there someway I can get everything I have edited up to full quality? Or am I going to have to start again?
Im not great at explaining myself i know. Any help would be massively appreciated

If this helps, this is a screenshot. You can see the clip in the viewer is full size but the canvas is showing a smaller, poorer quality clip.

When I import pictures from my camera into iPhoto, does it import the original photo size?

I've been importing pictures from my camera & my phone into iphoto, but I'm not sure if it's automatically importing it as the original file size and not changing it into a smaller photo... Is there a way I can check this?
Thanks in advance for your help

Yes it imports a byte by byte copy of the photo.
What do you mean by 'size'? Do you mean file size? Or the dimensions of the photo (length by breadth)?
You can compare simply by exporting the original out of iPhoto
File -> Export, and set the kind to Original
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How to get rid of thumbnails who've lost their full size photos?

How do I get rid of thumbnails who've lost their full size photos?? ... ie when I spacebar on them I get the exclamation mark ;-(
I've tried rebuilding the library with all options checked; with all except the last 2; and just the first 2 on thumbnails; and the 2nd only. All to no avail!
I expect iPhoto Library Manager would do the trick but don't want to redo my faces stuff which I believe it can't cope with yet ;-()
Long story how I got here but I've re-added recovered full size files that iPhoto '08 "lost" and now in '09 I want to get rid of the thumbnails that point to the missing files.
I now have 2 thumbnails of most pictures - one that works to the full size and the other that gets an exclamation mark! ... I want to get rid of the latter.
I can obviously just press delete on the thumbnail but I need to do it ~ 20,000 times ;-()
A thought ...can I use search somehow to only return the duds?? ... then delete all.
TIA
Barry

You may have to start over from scratch as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
This will get rid of all the orphan thumbnails and give you a clean library. Before doing that you could follow the first 8 steps of Old Toad's Tutorial #1 which will write the keywords, titles and comments to the original files so they will be there in the new library.

Get original component size in componentResized()

Does anyone know how to get the original component size (i.e. the size prior to resizing) of a JComponent after the componentResized() method has been called. I need access to the original and the new component size in the componentResized() method. I am trying to avoid keeping and maintaining lots of arrays of component sizes on the basis I might need a component's size if it changes.

This JPanel is managed by GroupLayout and all components in it have preferred sizes. All the layout for this JPanel is managed by the layout. I need the original component size (and new size) in the event handler method componentResized() because any component can be resized and the change in size affects other JPanels.
Does anyone know if it is possible to get the original component's size from the componentResized() method and if so, how.

When I resize my image it reverts to full size when I layer it?

I'm working with a newly installed photoshop elements 12 on a Mac. When I resize an image (for example 1" x 2") and layer it onto a blank sheet (8.5 x 11in) in reverts back to full size and covers the entire base layer. I've tried changing the "view" to print size but it doesn't stick when I layer it. Is there something I'm missing in the settings? Do I need to reinstall Photoshop?

Have a look at the following discussion:
http://www.elementsvillage.com/forums/showthread.php?t=82355&highlight=resize
I think what you are seeing is the result of dragging a file from the photobin to the workspace. You'll find other ways to add your layers to your project.
Note that that behaviour has been changed in PSE13.

Printing from Windows Explorer is full size

I have a number of scanned pdfs that are 11 x 17 scans. When I right mouse click on them in Windows Explorer and click print, most of our computers will automatically rotate and resize the page so that it prints properly on 8 1/2 x 11 paper. However, on one of our newer computers, it seems to be printing in full size (and not rotated), so we are not able to see the full page when printed. Interestingly enough, if you open the file first in Acrobat Reader and then print it, it seems to default to rotating and printing properly on 8 1/2 x 11 paper.
This new machine is running Windows XP and has Acrobat Reader 7.0 installed. This behavior has been observed with two different printers when printed from this machine.
Is there some sort of default printing settings in Reader that I need to adjust?
Thanks,
Keith

If I open the file in Reader and click File-Print, the Auto-Rotate and Center checkbox is checked. Page scaling is set to "Reduce to printer margins". Clicking OK yields the expected results. However, if I close Reader and then, in Windows Explorer, right click and then click print, the resulting print out is not auto-rotated nor is it sized according to the page size. I would have assumed that the print settings would be sticky as well, but that does not appear to be the case on this computer, or at least those settings are not applied to printing from Explorer. This may be a Windows XP issue, although I only seem to have the problem with 11 x 17 pdfs. Do you have any other thoughts?

Sending pictures on BBM gets lower size and quality

My friend has Bold 9000, and I have Bold 9700. When i send a picture to his bb through bbm, he recieves it in full size and quality, but when he sends me a picture from his bb to mine through bbm, i recieve it in a lower quality and size then the actual picture. we both are using the latest bbm. please help

Well before you uninstall the BlackBerry, you can create a backup using Desktop Manager. Also you can wireless backup your BlackBerry Messenger contacts within BBM.
To create a wireless backup:
1. Open BlackBerry Messenger.
2. Press the Menu key and choose Options.
3. Scroll down to Contact List, and click on Backup.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do I get the full size of my pics or video into the time line?

Greetings,
I've nener been part of a forum before and an wondering if this will actually be taken seriously. I'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). Would someone please advise me as to how I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
Regards,
The Powered Parachute Guy

Click the NEW ITEM link on reply page #5 in the PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
Also read below...
Some of this is from the Premiere Elements forum, but the idea of sizing pictures is the same for PPro or Encore
Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PPro Crash http://forums.adobe.com/thread/879967

Help! I "optimized video" to "original full size" and...

Similar Messages

Maybe you are looking for