HELP!i read some boards,some people have the same problem.and no one helps.
my ipod wont start up but it has the apple thingy on it...and i cant download the ipod updater...it wont let me...
ive been reading for days, some people say delete apps, some say delete voice memos, ive done both and still nothing, confused .com!
Similar Messages
-
Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?
You need to update iTunes to 11.1 on your PC
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?
Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
I have the same problem and after reading all of these posts I still don't see an answer! HELP
Same problem "Set the PC to start scanning: Need an answer, no help so far.
Hi, thecooktooo!
So that the Community can help you better, we will need to know exactly which model of printer or scanner you're using, operating system is running on your computer, and which applications you're trying to scan with. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day! -
Please answer as soon as possible.
Have you tried a rest or hard reset?
Hold your power button and your home button for about 15 seconds until you see the apple logo.
Ignore the power slider when you see it. -
Always i have the same problem with MPG2. doesn't support
anybody fixed this problem or I must change the serial numbers always again and again, and re-install ADOBE and the same problem came back after worked two or three weeks.
sorry i confused , i mean encoder not encore. > ( some friends said you must update your Encore ).
and i updated this encoder to the latest version as u see in this Pic
and finally i lost MPEG 2,
thank U for help.
is it necessary to re-install all or wait till Adobe Fix this problem ?
i think many people have the same problem . what is wrong with this MPEG 2 ?
and why this format doesn't come with installing Adobe straightly ?
thank you again... -
hi dera i have a problem whit itunes is not opening.
whil i am trying to open it nothing happens.
i also removed sc info files still i have the same problem
i any one know to how plz..........You can try mp3val, that might fix them up.
Alternatively, if the files are in a standard <Artist>\<Album>\## <Name> layout then turn off Copy to iTunes Media folder when adding to library and use my script TagFromFilename to fill in the missing information.
iTunes often has an issue handling files with multiple tags. These may be introduced by other software such as Windows Media Player, Winamp, or MediaMonkey. Files may have both ID3v1 and ID3v2.x tags, and if I read the ID3 specification correctly, there is also support for multiple ID3v2.x tags each coded for a different language. When there are multiple tags iTunes behaviour can sometimes be unpredictable. In some cases edits to the metadata can be written to one tag, and visible in Windows Explorer, but iTunes insists on reading back unchanged values from the other. In such cases you can use Convert ID3 Tag > None several times followed by Convert ID3 Tag > v2.3 and whatever iTunes knows about the file will be written back to a clean tag. Embedded artwork is erased so needs to be reattached. Using my script CreateFolderArt before and then after the tag conversions is one way to workaround that part of the problem.
Also of note is that certain pre-defined genres are represented by a code number rather than text so that they can be presented in the local system language. There is always a possibility that Windows and iTunes have slightly different values in the look-up tables for some of these.
tt2 -
I have a PC. I would like to sync my iPad2 via itunes. My computer recognizes my ipad but itunes does not. I have uninstalled itunes, shut down the computer and restarted plus reinstalled itunes. I visited the Apple store there is no problem with the iPad or the cord. I still have the same problem and am unable to sync when I plug in the iPad via the USB cord. Does anyone have further suggestions?
Try going into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then redownload and reinstall iTunes and see if it'll work
If the computer sees your iPad you know the cable and connection is good, so the issue has to be software. -
I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is. -
I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.
In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help
This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card. -
After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!
Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...
Maybe you are looking for
-
Where is the autofilter (excel option) in numbers for ipad2
Please help me. I bought numbers thinking that was the same of excel.
-
How do I clear a false paper jam reading on a CM1312nfiMPF?
HP CM1312nfiMPF all-in-one: I have cleared a paper jam in the output bin and closed the rear cover. The screen on the machine says that I still have a paper jam in the output bin and will not let me continue. I have double checked the input tray a
-
I had a *.htlm file. How can I edit this file? In previous version of Mozilla or Netscape, I can go to File => Edit page. Then I can modify my *.htlm file. How I can get the feature again? I couldn't find this feature in Mozilla Firefox.
-
i cant sync my ipod touch, but i need to because i forgot my security passcode and cant get on to my ipod
-
Hi all i am pretty confusion about decide the planning strategy. here my client requirment is construction project and they have their own plant to full fill their requirments.process flow is like this get requirments from different projects Project