Help! I updated to 10.9.1 on my mac and now the internet stopped working!
I updated to 10.9.1 on my mid 2010 macbook (yes these things still exist) a while ago and since then a few strange things have been going on with my computer for example: eventhough I installed an SSD it takes ages to log me in, or sometimes my dashboard decides not to load but the thing that is the most annoying that after about 20 mins or so the internet stoppes working on the app store and all browsers (surprisingly the internet works on games that use it) also if i reboot my computer i have another 20 min window to use the internet. It all started a while ago when i opened safari and it told me that "safari web content could not be displayed" or something like that. Does it matter that i installed the newest flash player shortly before i updated to 10.9.1?
It works. It also gives you lots of options - clone tio image, bootable clone, clone to root, leave stuff in root untouched, etc.
Nice guy who wrote it too.
Basically a front-end to rsync
Before you muck around, at least back up what you have - your files, libraries etc are intact. If possible, then make THAT external drive bootable (put 10.9 on it)
Grant
Similar Messages
-
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton -
I updated to Adobe Muse 2014 and now the anchors on my site stop working on the page after one click. Vertical scroll and active state on the buttons also do not work. Is this a bug?
I am also dealing with an anchor that stopped working. I tried everything i can think of to make it work, but no luck so far. I hope to see a helpful response here. Thanks.
-
I was running 4.0 on my Intel Mac (Leopard 10.5.8), and everything was fine. Firefox automatically updated me to 4.0.1. Then I noticed my computer running very slowly. I am unable to quite Firefox without forcing a quit.
Can I reinstall 4.0? If so, where can I download the original version?
Thanks.Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:'''1.9.0.11''') Gecko/'''2009060214''' Firefox/'''3.0.11 FBSMTWB'''
Your users agent is stuck at Firefox 3.0.11 due to a extension during when you had 3.0.11 and it tacked on stuff on end and kept it from updating the version number. This was due to the "Fast Browser Search toolbar" extension (FBSMTWB). This issue is not a problem with Firefox 4.0 and newer.
See this on how to reset it to normal. https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent -
I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!
Make sure that Work Offline is unchecked: File > [] Work Offline
-
I have updated to Maverick on my Mac and now the thumbnails are tiny in Photoshop what can I do
I have updated to Maverick on my Mac and now the thumbnails are tiny in Photoshop what can I do about it as they are so small I cannot see them.
You need to update to AE version 11.0.4 (the latest version of CS6).
The need to update has been made widely public. Not only has it been posted on Adobe's site, but there are dozens of threads on it in this forum alone (not to mention in /r/AfterEffects on Reddit and every other AE forum I've been on). A tiny bit of Googling would have solved your frustration in an instant. -
I have updated my iphone 3gs to 6.1.2 software and now it isn't working. I have chosen language and location and now i'm at the step that i have to use wifi or to use itunes to continue. I try to connect it with itunes, but i can't. plz sb help me!! the first image is at itunes and the second is at my iphone (i'm at this step)
Welcome to Apple Support Communities
The OS X Software Update Seed Configuration Utility is an app that developers use to get OS X beta versions. You mustn't use it if you aren't a developer.
If you are a developer, you can find the Safari 6.1 uninstaller in the Safari Dev Center -
Adobe pushed a security update to my computer and the update failed. Now the "print to PDF" option is missing from all of my programs. How do I get it back?
Version X.1.12.Thanks. That's exactly what I did, but from the Adobe help screen. It did the trick, but I'm not very happy with Adobe for messing up my system.
I appreciate your answering back. -
This is only happening since I've updated. It's really annoying because its also hard for me to update my apps, please help!!
This is a known problem and a fix is being worked on.
-
I did the software update, and upon restarting the speaker in the dock is off, and in the system preferences I am not allowed to uncheck the mute. Using the keyboard buttons doesn't work either.
I have had the same exact experience. I purchased my MacBook Pro about a month ago and I've been using the wireless Airport ever since with no problems whatsoever. Today I went to use my Mac and the "no airport card installed' message appeared as if I have no airport card. How can that be? I'm not sure what could have caused it. I have updated my mac as often as updates are available and all I can think is that the most recent has interfered. Any thoughts on what went wrong and how to fix it?
Thanks!
P.S. I have since moved to Nepal and the chat line only asks for US or Canadian phone numbers. That can't work - what about on - line chats?
Message was edited by: ronfromamesbury -
I updated the software for my iPhone 4 from 6.0 to 7.1.2 and now pictures (contact picture/picture ID's) no longer appear (take up the entire screen) when receiving or making phone calls. They only show in a small circle which is not convenient at all. How do I fix this, please?
You are welcome. I have seen numerous posts on this subject, so I suspect you are correct. It doesn't seem like a welcome change. You can send feedback to Apple at http://www.apple.com/feedback/iphone.html
-
Help please:'(
After the iPod was retrieved from the bowl of water did you leave it off for about a week or so to let it dry out. Perhaps even placed it in a sealed container of rice or desiccant to help absort the moisture from the device? If not, it's like that the internal speakers were fried when they came into contact with the water.
If a reset and restore of the device via iTunes (both from backup and to factory settings) fails to resolve the issue, it's more than likely hardware related. In that case, you'll need to take/send your iPod in for service either to Apple or a third party service.
To reset the device, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
For backing up and restoring, see this article.
iTunes: Backing up, updating, and restoring iOS software
B-rock -
Hi
I downloaded BB App World 1.1.0.33 for my Javelin 8900 yesterday and just realized today that my App World icon is gone/ hidden!
I hav searched all folders and it is not there.
When I checked my applications in options it is very much there as being fully installed!
How do I 'unhide' or find App World please??
Solved!
Go to Solution.jmrmb80 wrote:
Is it hidden on the home screen? Did you check if it was hidden in either the Downloads or Applications folder?
No it is not hidden on the home screen as i set it to show all. It wasnt located in the downloads folder either. I had mentioned earlier that when I checked on the list of Applications installed it was listed there as being installed on the system.
My solution was to delete the installment from the Applications list, reboot the device then re-install it once more (I did this twice btw). When I did that the second time I checked the downloads folder and it was finally there! I hope this helps @ rcorai.
Though I had pretty much preferred if I could have located the previous app rather than delete n re-installing it! -
my phone fall down and the network stopped working can't search to any coverage
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
I just updated the OS on my iphone4 and now it won't work- says 0bytes available
I just Updated the iOS on my iPhone 4 from 4.3.1 to the latest update, (after backing up my data on iTunes) and now the iPhone says I have 0bytes available and need to delete some photos or videos.. I have tried deleting content from my iPhone, as well as re-setting it, and nothing works. What could be the problem?
Try hold down Power and Home buttons for 10 to 15 seconds.
Allan
Maybe you are looking for
-
Calender items open and hour later then the correct time that is Entourage
I currently am using Entourage version 12.1.5. In the last month anytime I receive a meeting invitation and accept it in Entourage, it shows up an hour later on my iPhone calender. This also occurs when I create a meeting in Entourage it also shows u
-
Hi......looking for help in deleting icloud from my iphone 3G......I cannot receive or make calls. I have changed my password as directed, and the phone is frozen. Any ideas? Thanks.....
-
How do I convert a pdf to a word document?
How do I convert a pdf to a WORD document and keep all the formatting?
-
Connecting a 3rd Monitor to a G5...
Hi. I have 2 monitors connected to my g5. Does anyone know what i need to buy in order to connect a third monitor? Thanks, Ben
-
Output of one report is input to another report?
Hi Expert's, Is it possible to use output of one report as an input to another report.I mean to say fields which are avialble in the first report is used as a input for another report. Thanks, vasu.