HELP!!!!!!!!, I WANNA UPLOAD VIDEOS IN MP4 FORMAT BUT..

HELP!!!!!!!!, I WANNA UPLOAD VIDEOS IN MP4 FORMAT BUT ITUNES SAYS THERE IS A PROBLEM AND SHUTS DOWN THE PROGRAM!!!!!!!!!!!!, PLEASE HELP I FEEL I HAVE GOTTEN RIPPED OFF!!!!!!!!!, I HAVE MICROSOFT XP. I ALRADY REBOOTED ITUNES LIKE 5 TIMES. I USED VIDORIA TO CONVERT THEM INTO MP4. i WENT TO ITUNES TO UPLOAD THE VIDEOS THEN IT SAYS ERROR WE NEED TO CLOSE THE PROGRAM AND I DONE EVEN HAVE A VIDEO ON THERE. PLEASE HELP!!!!!!!!!!!!!!!!!!!

Hold Please, i am having this very same problem and i feel the same way. I was having the problem every sents i got the video ipod. So Could you please tell me how you solve this problem. please!!

Similar Messages

I have a JVC GY-HM100U and when I try to get the video files (MP4 format) off of the the SD card I get the error message OSStatus error -12909...any thoughts?

I have a JVC GY-HM100U and when I try to get the video files (MP4 format) off of the the SD card I get the error message OSStatus error -12909...any thoughts?

To be more precise: You MUST shoot in mov. Then drag the Clip bins from the card to you hard drive. Then drag the clips to FCP timeline and FCP asks you if you want to change to the right codec and of course you say YES. Now you can start editing. Can not be more simple. This camera was specially designed for use with FCP.

I took video in a format (AVCHD) 60i/60p and it does not download into iphoto. Any way to get this video into MP4 format?

I took video in the format (AVCHD) 60i/60p and it does not download into iphoto. Any way to get this video into MP4 format so it will download?

Do you have iPhoto 9.3 or later? Have a look at this support article:
Using AVCHD video with iPhoto '11

How do I get my films into iTunes library , there r in mp4 format but will not load to itines

I have converted my films to mp4 format but they still will not load yo
My iTunes library can anyone advise how to sort this out
Thanks

What version of iTunes does she have? Updating it will have no impact on the songs in her library. As far as your PC, if you can't use iTunes you can use 3rd party software such as Winamp or Xplay.

I'm trying to view tutorials in an mp4 format but having no luck at all. Any suggestions out there?

I have a Wacom Bamboo Tablet and am trying to view the tutorials at http://www.penscrappers.com/learning-center/painting-in-detail/.
These tutorials are in the mp4 format but won't display.
Does anyone have any suggestions??
Thanks,
Roberta

You need the Apple quicktime plugin.
You can either download [http://www.apple.com/quicktime/download/ Quicktime from Apple] .
Or preferably, you can download [http://majorgeeks.com/QT_Lite_d5718.html Quicktime lite (QT Lite) ] which is the bare essentials to get you going.
Make sure Firefox is not running when installing the software.

I converted video to .mp4 format. I can see the video in itunes and it is not syncing. what to do?

I converted the video to .mp4(MPEG-4) format. I can see the video in iTunes library but i can sync it to the iPod. It is showing that the video cannot be played in iPod. What to do to sync the video successfully??? Please help.........

Highlight the video in iTunes and choose Advanced -> Create iPod or iPhone version and wait for it to finish converting. Then try and sync the newly converted version over to your iPod Classic.
B-rock

How do I render/export Videos to mp4 format ?

How do I render/export videos in the mp4 format ?

You need to ask in the program forum
http://forums.adobe.com/community/premiere_elements/content
or
http://forums.adobe.com/community/premiere/content
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Importing Digital Video as MP4 Format

I want to import HD video from my Canon VIXIA HMF500 into my MacBook as an MP4 format. iMovie only saves it as a .mov file. any suggestions?

mfpjr wrote:
I want to import HD video from my Canon VIXIA HMF500 into my MacBook as an MP4 format. …
Why?
What do you expect using a different media-container?
and, btw, the movs in iM are transcoded (into aic) files, the original mts contains h264 encoded stuff.
there many options to rewrap that lossless into mov, mp4, flv, mkv, whatever wrapper ...
depending on, what your next step is ......

Converting a video to MP4 format

Good morning.
I have a video on my mini that I want to shrink down in size and put into MP4 format. If I use Handbrake and convert it keeping the aspect ratio the same and not changing any of the height and width numbers, will the resulting file still show correctly on my widescreen tv, the same as the original did?
Thanks.

Good morning.
I have a video on my mini that I want to shrink down
in size and put into MP4 format. If I use Handbrake
and convert it keeping the aspect ratio the same and
not changing any of the height and width numbers,
will the resulting file still show correctly on my
widescreen tv, the same as the original did?
Thanks.
In my experience movies I compress to mp4 play in the same apsect ratio on my widescreen HDTV.

How to download youtube video in Mp4 format from safari ?

Does anybody knows how to put link and when video plays just click on it and it will download. I had that option a while ago and cant find the way to make it again. Or if you know any other way....

Using Safari 5.0.1 and Snow Leopard I used part of what I found online and stumbled across the final solution indicated by brackets {}
From <http://mac-dvd.com/mac-guide/how-to-download-youtube-video-on-mac-for-free.htm l>
Step 1: Download the videos
1. Find your favorite YouTube video. This step is pretty self explanatory. Be sure to use Safari and search for your favorite YouTube Video. {Select 720 p or greater.}
2. Next, you need to go to 'Window' and down to Activity. Click on 'Activity' to bring up the next dialog box.
3. Once the dialog box has popped up you need to look for the YouTube page among all the page titles and files listed in the window.
4. Once you locate it and expand all the activities going on in the page, look for the largest file size (this is shown in the right hand side). Most of the files found in a YouTube page are small files while most FLV files are several megabytes.
Once you locate the largest file,
What I found out:
{Hold down the SHIFT OPTION key and double click on it. The video should start downloading in your download and be named videoplayback.mp4.}
What I found out in the videos I tested is that if you did not use 720p or higher, SHIFT OPTION double clicking or just double clicking on the large file in the activity window downloaded an FLV file, which you then have to convert to mp4.
Hope this helps.
Message was edited by: James Mol

3120c phone. How do I switch video to .mp4 format

I'm wondering how I can change the format of the video I take on my phone to .mp4, from the default format of .3gp.
Thanks,
Pablo

There are any number of video format converters out there that might do the trick, but the 3GP format is a deliverately low resolution format intended for mobile devices with low system resources and small screens, so the success of converting to a format doesn't really offer any benefits other than being able to play them in a wider variety of players, even in that case RealPlayer normally has no problem playing the files.

Please Help! Audio off on imported .mp4 files (but fine everywhere else).

Hello,
I am trying to trouble shoot a problem. I am a beginner when it comes to the technical end of this so please forgive me if I don’t post the correct information. Hopefully somebody here can help or point me in the right direction.
My problem is this: I’m using Skype on my (windows 7 ultimate) pc to make group video calls. I use Skype along with the program Evaer in order to record the video and audio of each person on the call separately. It records it using the H.264/MPEG-4 AVC Codec. At 1280 X 720 and 30fps. The video files have the audio in them as well. However it also records a separate .mp3 with everyones audio at 265 BitRate and 48000 SampleRate. So after the group call (with 3 people) is finished I will have three .mp4 video files w/ audio (1 for each person on the call) and 1 .mp3 file. If I open any of the video files in Windows Media Play they play just fine. But when I bring the file into Adobe Premiere CS6 for editing, the audio is completely off. What can I do to fix this?
I did “interperate footage” for the file and this is what it shows:
File Path: F:\VIDEO RECAP\ call1.mp4
Type: MPEG Movie
File Size: 1.3 GB
Image Size: 1280 x 720
Frame Rate: 28.47
Source Audio Format: 16000 Hz - compressed - Stereo
Project Audio Format: 32000 Hz - 32 bit floating point - Stereo
Total Duration: 00;57;55;04
Pixel Aspect Ratio: 1.0
I want to edit this in HD. So the project setting I choose is “HDV 720p30fps”. I import my file, and then drag it into to the time line. It says that the sequence settings are wrong, and so I tell it to change them automatically (I have also to it to leave them) either way it doesn’t matter. When I play back the video .mp4 in Premiere CS6 the audio is completely off.
So is there some setting I need to tweak? Is it the project settings that are wrong? Or could it be a problem with my graphics, and sound card? I just dont understand why it plays fine in WMP but not in Adobe. Any help or advice would be truly appreciated. If you need any more info, just let me know.
Thanks!

Is there any more info that would help you guys? I still cant figure this out.

Video files in MP4 format?

I just took some video this morning with my 8330 and uploaded it onto my computer. Unfortunately all three video files were uploaded in the MP4 format, thus making them unviewable on my computer. My Windows Media Player only plays mp3 formatted files.
Is there some way to change these files before uploading them on my computer, or after? Or am I just going to have to deal with them all being MP4? Thanks for any help!
Brian

I just upgraded my 8300 to OS 4.5, shot a video, Emailed it as an attachment to my desktop, and it came as a .amr file, whatever that is. Anyone have any idea as to how to play it back, or convert it to a more standard format?

How to play mp4 format video on ipad 3

I have video file in .wmv format which i convert in mp4 format but still it not supported by ipad & how can add this file on ipad

WMV, or Windows Media Video, is a compressed video file format developed by Microsoft. The most important aspect of a WMV file is that its format allows large video files to be compressed while retaining their high quality. They may be of any size and may be compressed to match any bandwidth (connection speed). Therefore WMV video becomes very popular among video lovers to save media data. However, the format is not as popular on devices like iPad 4 as it's said to be. So if you have a lot of WMV files and want to play the files in WMV on iPad 4 (iPad 3 included), you need to convert WMV to iPad 4 compatible file format first.
According to iPad 4 tech spec info on apple office site, we can acknowledge that iPad 3 only read video in MOV, MP4 and M4V. Therefore WMV has to be converted to iPad 4 MP4 or other format for the playback. To get a satisfying result, for instance, loss-less video quality, quick conversion, simple converting process, you'd better ask a professional tool for help.
Google search one m4v software, convert WMV to m4v for you ipad. For example : https://www.google.com/search?hl=en&newwindow=1&safe=active&noj=1&biw=1440&bih=7 13&q=http%3A%2F%2Fwww.brosvideo.com%2Fm4v-converter.html&oq=http%3A%2F%2Fwww.bro svideo.com%2Fm4v-converter.html&gs_l=serp.3...14356400.14356400.0.14356618.1.1.0 .0.0.0.0.0..0.0.les%3B..0.0...1c.GxltbWYWtLc

I have a video in .avi format, what format do I need to convert to, to play on my DVD recorder, please can anyone help?

I have a video in .avi format, but what format do I need to convert to, to play on my DVD recorder, please can anyone help?

tylerfrombalantine's post had zero grammar in it, so it's not clear what he's saying. I bought a DVD recorder and the instruction manual lists all the disc formats it can play. Check your DVD recorder manual to see what works with it, then burn a DVD that matches. It should be fine to burn just a standard DVD, since of course any DVD player can play that.
Depending on the program you use, you may not have to convert anything manually. The program might convert your current video format to DVD on fly as it burns the disc.

HELP!!!!!!!!, I WANNA UPLOAD VIDEOS IN MP4 FORMAT BUT..

Similar Messages

Maybe you are looking for