HELP I´m DESEPERATE, i need a loot of HELP - Graphs in REPORTS9i
Hello again, i want to make my Graph print a line, anouther color, that line value it is on a Collumn on my DATABASE.
But it is not the only thing i put on the graph, because the other things are group by date (DAY), but this collumn does have not anything with the date, it is a Max collumn and a Minim.
I want to have this values like a horizontal line, to the person who go look my graph see if the control registred in DATABASE are in/out of STANDARD limits (MAX/MIN) how are 2 collumns in DataBASE!
Pedro Lavado
I think this is the wrong forum, Pedro.
Similar Messages
-
Help Needed : ADF DVT Dual Y graph Tabular data
Hi,
I need to display a dvt:lineGraph containing 2 Y axis.
The data for the graph is tabular data from a backing bean.
I am able to display a single y axis graph.
But since dual y graph needs two series set I am facing problem in specifying that which rows belongs to first series set and which rows belong to the other series set.
The tabular data is a dynamic one which may change upon every partial refresh every 5 seconds.
regards
Lalatendu PatraHi,
Please see my response on this thread on how to achieve this with a relational data control:
Re: Drilldown in ADF DVT charts using data control
Thanks
Katia -
Need some advice - Strange Battery Graph
hi there,
need help here plz
I'm facing issue with my Z1 battery since a couple of weeks : it drains a bit faster than it used to do, and the graph is showing a strange evolution of battery consumption ! the graph is in a shape like "stairs" : for example, it drops from 70 to 65 without using the phone intensivly ... and keeps going like this till it reaches 0 and shuts down... Battery is still good according to the Disgnostics app (*#*#4636#*#* menu from the Dialer)
I also noticed a bit less battery life : used to be about 24 hours, using the phone normally... but now i can only get about 16 or 17 hours using phone the same way
would be grateful for any advice here, thanks
PS : I apologize for any mistakes, english is not my native language, neither my second one
Regards,
ZeDryginHi Alex,
Thanks for your answer.
Actually, I don't think an app is draining the battery. apps consumption seems OK to me. the most energy used by screen and Sys/kernel, and I have no crappy apps like booster, taskillers, ramsaver...
I tried to run on safe mode for a couple of days. Battery lived longer, indeed... But not so much, it lived about 5/6 hours more than usual, this seems normal as no apps are trying to sync etc... and percentage drops are still here (maybe a mismatch between the read voltage and estimated percentage!)
BTW, still on 4.4.4... and wondering when will I get Lollipop ? I really hope that a software update will solve the problem, otherwise it could mean the battery is no longer efficient and I have to replace it !
will try to upload a battery graph for a typical day use, to show clearly the sudden drops of battery percentage !
Regards,
ZeDrygin ! -
Need specific points in xy graph
I have xy graph-similar I drow and I'd like to find points, marked with red, automaic(not by hand with cursor) For he right point y value (x=0) and for he left one x value (y=0) The input are two arrays.
..if anyone can help..
Attachments:
gr.JPG 17 KBWell, I think easiest would be to convert the data to complex, search theta for the desired angles, then find the one with the largest R.
Attached is a quick attempt (LabVIEW 7.0). It seems to work with your data, but please verify the code. There are probably bugs.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
histeresis4.vi 212 KB -
Need a few hints for graph component Stacked bar
Hi to all,
JDeveloper11gR2
i need a little step by step tutorial to create a stacked bar graph component to answer the following questions.
which data table structure i need?
which data structure i need? horizontal (columns stacking) or vertical (rows stacking)
Will i need the hierarchical graph option in the creation wizard?
I think the documentation unattended a litte bit the useful stacked graph component.
Thank you very much.
Best regards
Gunnar
Edited by: gkieck on Dec 14, 2012 12:06 AM...
-
Need to improve speed when graphing large arrays
My app generates several arrays of 500.000 elements which I want to display in a graph. Sending this array directly to a graph makes everything go very slow, I guess because of large memory allocations (LV is obviously not very good at handling large data unless having very good insight in how LV handles memory etc). It has been suggested in other posts and in App notes to decimate the data before displaying, since the graph can't display more points than the pixel-width anyway. The question is how to implement a decimation algorithm in order to get the same graph as if no decimation was made, and to preserve resolution when zooming into the graph. which require doing a new decimation with a new subset of the data. I think this graph decimation algo should have been implemented as a VI in LV, to put between the data and the graph. Since this is inherent in Labview when trying to graph more data points than pixelwidth, it should be hard to implement such a feature in LV. I would think this is quite common problem and would like to get some comments , especially from NI people, about this issue. Any work-arounds are also appreciated.
You are probably going to need the following sub vi's as well.
Thank You,
Earl
Attachments:
Contrast Bright Controls.vi 24 KB
AI Read config.vi 28 KB
Read Line.vi 21 KB -
Need help on self referencing a ssrs report
Hi All,
I have a graph on one of my report which shows data on level 1 by default and go on showing level 2 and level 3 data on successive clicks. This has been achieved by self referencing a ssrs report and passing respective parameters. Now to identify which level
data needs to be shown on graph, I have used one more parameter which default value is 1 and go on increasing to 2 then 3 on successive click and this parameter value is used in group expression of graph. This works just fine.
But the real problem has occurred when you go and select report parameters which are corresponding to level 1, level 2 and level 2 values and click on apply in between. For e.g. Assume level 1=Region, level 2=SubRegion and level 3=Country. When you run this
report it shows region wise data on graph and value of fourth parameter is 1, now when you click on graph it takes you to level 2 i.e. it shows sub region wise data on graph and value of fourth parameter is 2 but when you go and select all region, sub region
and countries from report parameters and click on apply button then it should show data on graph region wise but since the time you were selecting parameter data was sub region wise and value of fourth parameter was 2 it shows data for all sub regions which
is weird and not acceptable at all.
I am hoping SSRS should provide a way to pass parameters just like we pass in action on any control within ssrs report to solve this issue. Please help me out to solve this issue or let me know if need more infor.Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards -
Need Help with creating Line Graph Chart
I have the following XML Data
<DATA>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Longview</BRANCHDESC>
<LOCATION>30</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>99.9</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>99.2</STDCURRENTPERIOD>
<VARIANCE_STD>-.7</VARIANCE_STD>
<VARIANCE_STD_PERCENT>-.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.97</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Oakland</BRANCHDESC>
<LOCATION>31</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>100</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Seattle</BRANCHDESC>
<LOCATION>32</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>12.4</VALUECURRENTPERIOD>
<QUARTERVALUE>18.7</QUARTERVALUE>
<YTDVALUE>18.7</YTDVALUE>
<STDCURRENTPERIOD>-2527.7</STDCURRENTPERIOD>
<VARIANCE_STD>-2540.1</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.5</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>18.7</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>37.2</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>6.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Yakima</BRANCHDESC>
<LOCATION>33</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>36.4</VALUECURRENTPERIOD>
<QUARTERVALUE>68.2</QUARTERVALUE>
<YTDVALUE>68.2</YTDVALUE>
<STDCURRENTPERIOD>-5517.2</STDCURRENTPERIOD>
<VARIANCE_STD>-5553.6</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>68.17</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>68.6</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>99.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Twin Falls</BRANCHDESC>
<LOCATION>34</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>99.8</QUARTERVALUE>
<YTDVALUE>99.8</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.8</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>99.4</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Spanish Fork</BRANCHDESC>
<LOCATION>35</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>7.7</VALUECURRENTPERIOD>
<QUARTERVALUE>10.2</QUARTERVALUE>
<YTDVALUE>10.2</YTDVALUE>
<STDCURRENTPERIOD>-6016.2</STDCURRENTPERIOD>
<VARIANCE_STD>-6023.9</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.1</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>10.23</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>14.9</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>8.1</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
</DATA>
Note that each Branch_Desc has 12 periods called CURRPERIOD,CURPERSUB1,CURPERSUB2 ...... and 12 values for those periods as VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1, VALUECURRENTPERIODSUB2......
I need to create a Line Graph for each Branch for the 12 periods as defined above where VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1 etc. are the values for that period. The current BIPublisher Chart tool only allows one Value and One Label. In my case I have 12 VALUES (VALUECURRENTPERIOD etc.) and 12 LABELS (CURRPERIOD, CURPERSUB1 etc.). The SERIES or LEGEND should be the Branch Desc . So what I am looking for is to plot values(12 values) for 6 branches (so six lines) over a period of time (12 periods).Hi Tim,
We have this XML data calculated from several tables where the layout was in the format of One account(a Branch in this case) and 12 periodic values for the same . So reformatting the XML is not going to be easy as the source data is like this itself. I tried un-pivioting the table (as this one is already pivoted) but it looks like Oracle doesn't support this feature yet, but is suported in DB2 or SQL. Please take a look at this link
http://blogs.ittoolbox.com/database/technology/archives/unpivot-query-12798?close=true
So I am stuck with the data in this format and users want a line graph for each branch over he period of time. May be somone on this forum can figure out how to un-pivot a table in Oracle. Thanks for your help in advance. -
Need help related to Graphs/Charts in Labview
Hi,
I need some info related to Graphs/Charts in Labview.
Where I am facing problem is:
User has to select from a ring control , type of graph/chart he wants i.e.,XY Graph,Waveform Graph,Waveform Chart...
Based on his selection I need to create that particular graph dynamically at run-time and plot the data.
Please suggest how I can do this....
Regards,
HarikaHI Harika,
There is property to hide the pages but you dont need that, you just need to display one page a time.
Just right click on tab control and in shortcut ment disable Visible Item >Tabs, this will hide the Page selection. If you want you can make the color of tab as transperent (It looks like you are not using any tab control)
Go to the terminal on the tab control, you can write the tab page number you want to display.
Regards
Santosh
Message Edited by SanRac on 07-28-2009 01:57 AM -
Hi, I'm trying to create a background that has a circular pie kind of effect that's popular these days where each slice of the pie is a slightly different color to create a cool background. This isn't the greatest example but check the red and dark red sun ray effect here ...
http://gainesvillesuzuki.com/images/ad_one.jpg
My question is, what is the easiest way to create this in illustrator?? I've been creating one slice with the pen tool, copying it while I rotate it with the rotate tool after I change the rotate axis to the middle , but doing that like 30-40 times gets really tedious, plus the pie slices never fit exactly together at the end (because the slices aren't divisions of 360).
If anyone knows a better way I'm all ears, thanks!This kind of pie graph is easy. Double-click on the graph tool and select the pie graph. Drag a square. Then enter as many digits as you need (always the same digit) in the top line of the data spreadsheet. Use the right arrow key to hop between boxes. You will need to fill in as many boxes as you need slices in the pie graph.
When you are satisfied with the number of slices, copy/drag the graph and ungroup it. Now you can colour the slices as you wish.
It's a good idea to keep the original grouped graph in case you need to add slices in the data spreadsheet. -
Can anyone help with a dynamic graph question?
Post Author: eseidel
CA Forum: .NET
I have a subreport that I'm having a lot of difficulty with and I dont know if I've hit the limitations of CR or I just don't know how to do it. I need to set the subreport graph parameters on the fly and I can't figure out how to do this. Here is the situation:
My report prints a vendor report card, one vendor per report page. For each vendor, I need to access a table and pull all parts that the vendor supplies our company with. Then, I need to create a seperate 2D bar graph for each part that is listed under the vendor. Since this is a subreport and would run for each vendor, and each vendor can have 1 to n-number of different parts, I need to create these graphs on the fly. Is this possible? Any suggestions. The furthest I have gotten was I can create a OLE DB(ADO) command that retrieves the parts for each vendor.
But from there I am stuck. Once I have these parts per vendor, how can I iterate through them and create a new 2d bar graph for each one? The graph itself would display on the x axis all of our vendors that supply us with a part, ranking them. So if a vendor supplies us with Rubber Hoses, magnesium and Aluminum then I would need three graphs, one for each, Rubber Hoses, Mag, Al that would list the vendor on the x axis and points on the y axis pertaining to that specific part. Understand? Is this possible? Help please. Thank you.
EricPost Author: quafto
CA Forum: .NET
The CR for .NET SDK doesn't have the ability to create graphs on the fly. I suggest that you design your report in Crystal Reports and get it working the way you want there. Work as much with parameters and formulas as you can. The .NET SDK will allow you to pass parameters and modify formulas at runtime. -
Help with possibly noobish question
Hello,
I need to make some complex graph structures such that this format will not do
1: 2 ->4
2: 4 ->2
I have several additions to each node to take care of that is the main problem.
each node has aarity which I could hold as a separate array to be accessed for each object instance of a node
Part 1:
The problem is that i have to know which node is connected to which arity element and then I have to search for the free elements and label their indexes with characters. I think I can solve this
Part 2:
The second problem is maybe a little worse as I have to translate certain groups graphs to something like this and then connect them to any graph as needed. Will i need to make a separate object for this purpose??
| ..................| n input wires connected |
|???????????????????????????????????|
| Wires maped to edges from graph |
|___________________________________|
| ..................| n output wires wires connected |
Part 3:
To compound this I have to find a way to implement a menu selector to choose random graphs or parts of graphs for a Genetic Algorithm. Selection is not the problem here its is mapping the structures into a chromosone which is causing me the problem.
Part 4:
Each connection has the graphs triggers different application specific rules that cause the graph to reduce or change connections.
Any help on strategies for these problems would greatly be appreciated
kind regards
PrashantHello all and thanks for the replies positive or not. Sorry if I offended you bbritta. I guess its not such and easy question after all.
Well its not due tomorrow and I am doing some research into a wierd topic so you guys are along the right lines. The topic I am researching is non-determinstic interaction nets. I don't know too many people doing this. Interaction Nets invented by a guy named Yves Lafont and you can google this and the topic I am researching.
All the code written thus far exists in C and is very hard to interpret as it uses a Lex and Yacc parser to implement the creation of tokens and syntax rules of the Interaction Nets programming language.
Basically its a high level visual graph programming language however it can also be used on low level based on interpretation. Thus the need for graph data structures. Essentially I have to modify this programming language for non-determinism and demonstrate this in a Genetic Algorithm. The latter would be no problem if I could get the data structure sorted. People familiar with Lamda calculus, Linear Logic and Process Calculus might have seen this in some research papers.
However I have not had a very good theoretical background so finding the data structures to map the complexity of the graphs is a little problematic. I will outline my idea and what I have done a little clearer below.
So far I have broken the prob into smaller steps as suggested by someone, I hope the pseudo code helps a little more.
class Symbol
convertASCIItoINt( char value) : return int
getChar() : return char
checkAvailability() : return boolean;
//each Symbol is assigned to a free port and is traditionally input.
//several instances of this obj are used to
class Port implements Symbol
initialisePort( num);
checkFreePorts( ) : return boolean;
setPortSymbol (port [num])
private ports [ num ];
setEndPortAsSpecial( ports [ num ]) // each node has a special port called principal port
// each node has a set of port and each port can have a label as a string
class Node
setNodeSymbol()
getnodeSymbol()
public Port node_obj [ port_num ];
setSpecialSymbol( string)
//destructor to delete node connected to
//duplicator to create a copy of cell value
//constructor create a copy of the cell
getSpecialSymbol() : return string symbol;
checkSpecialSymbol(node_obj [ port_num ]): return string symbol;
//so far as a typical graph goes i think its acceptable to connect the nodes in an vector with
//a list at each element although this is not shown below.
class Net
connecNodes( node_obj [ port_num], node_obj [ port_num] )
checkDeadlock(): return boolean; //check for cycles
public Node net_obj [ node_num ];
checkConnected( node_obj [ port_num], node_obj [ port_num] ): return boolean;
//this is where the execution engine will be placed
class InteractionRules
ruleTrigger( )
Node n = new n
n.checkSpecialSymbol()
// its here where things get complicated with the data structure as according to the rules I have to delete
// add or copy a value of a particular node in a Net
determineReduction()
//if (ports [ num ] = num )
// a reduction occurs according to the rule in the method above ruleTrigger();
//at this point the relevant nodes will be removed and new nodes will be added according to the rules
storeCopyofOriginalNet()
//needed to rollback if rules are infeasable or deadlock occurs.
}I desperately still need help to complete the data structure I have also considered manipulating the complex associations between the sets as multimaps and maps
Sorry if I am not clear I am trying my best to explain something I have had little background and almost no help in as I am creating the special rules as I go along such as keeping an copy of a net / graph before modifying it in the Genetic Algorithm.
Kind Regards and Best Wishes
Prashant -
Hello.
I need to make a XY graph but i don't know how to connect the graph with the rest of the program.
There should be two column which are imported from two other files. One will be the X values , and the other will be the Y values.
I've tried a lot of different ways to show the plot, but ewerytking is still not working.
So please help me ang i will be grateful.
Attachments:
wan.vi 19 KBCurrently, you read your data into an array of strings. For graphing, you need a numeric datatype. WIre an empty 1D DBL (instead of a 1D array of strings) to the type input of "spreadsheet string to array", then bundle the two 1D arrays.
Of course easier would be to use "read from spreadheet file", it will give you numeric datatype directly by default. Since you seem to have a single column instead of a single row in your file, you possibly need to transpose (see the boolean). Attached is a simple example (image), just wire it all up.
Message Edited by altenbach on 01-29-2007 05:35 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
XYgraph.png 7 KB -
Importing Graph Class/help implement a weighted graph class
Is there a way to import a graph structure into my java program so that I do not need to write my own graph class?
If not, does anyone have a graph class that I can use? I've been trying to implement this program for the past few days..
I'm having trouble implementing a weighted graph class. This is what I have so far:
import java.util.ArrayList;
import java.util.Queue;
import java.util.*;
public class Graph<T>
private ArrayList<Vertex> vertices;
int size = -1;
public Graph() throws BadInputException
ReadFile source = new ReadFile("inputgraph.txt");
size = source.getNumberOfWebpages();
System.out.println(size);
vertices = new ArrayList<Vertex>();
public int bfs(int start, int end) //breadth first search
Queue<Integer> queue = new LinkedList<Integer>();
if(start == -1 || end == -1)
return -1;
if(start == end)
return 0;
int[] d = new int[size];
System.out.println(size + "vertices size");
for(int i = 0; i < d.length; i++)
d[i] = -1;
System.out.println(start + " START GRAPH");
d[start] = 0;
queue.add(start);
while(!queue.isEmpty())
int r = queue.remove();
if(r == end)
return d[r];
for(EdgeNode ptr = vertices.get(r).head; ptr != null; ptr = ptr.next)
int neighbor = ptr.dest;
if(d[neighbor] == -1)
queue.add(neighbor);
d[neighbor] = d[r] + 1;
if(neighbor == end)
return d[neighbor];
return d[end];
public boolean addEdge(int start, int end)
Vertex v = new Vertex();
v = vertices.get(start);
EdgeNode temp = v.head;
EdgeNode newnode = new EdgeNode(end, temp);
v.head = newnode;
return true;
public void setRank(int vertex, double rank) //set the weights
vertices.get(vertex).pageRank = rank;
public double getRank(int vertex)
return vertices.get(vertex).pageRank;
If anyone could help. It would be greatly appreciated
Edited by: brones on May 3, 2008 12:33 PMbrones wrote:
along with the rest of my code, I'm not sure how to implement it as a weighted graphA single list is not the proper way of representing a graph. An easy way to implement a graph is to "map" keys, the source-vertex, to values, which is a collection of edges that run from your source-vertex to your destination-vertex. Here's a little demo:
import java.util.*;
public class TestGraph {
public static void main(String[] args) {
WeightedGraph<String, Integer> graph = new WeightedGraph<String, Integer>();
graph.add("New York", "Washington", 230);
graph.add("New York", "Boston", 215);
graph.add("Washington", "Pittsburgh", 250);
graph.add("Pittsburgh", "Washington", 250);
graph.add("Pittsburgh", "New York", 370);
graph.add("New York", "Pittsburgh", 370);
System.out.println("New York's edges:\n"+graph.getEdgesFrom("New York"));
System.out.println("\nThe entire graph:\n"+graph);
class WeightedGraph<V extends Comparable<V>, W extends Number> {
private Map<V, List<Edge<V, W>>> adjacencyMap;
public WeightedGraph() {
adjacencyMap = new TreeMap<V, List<Edge<V, W>>>();
public void add(V from, V to, W weight) {
ensureExistenceOf(from);
ensureExistenceOf(to);
getEdgesFrom(from).add(new Edge<V, W>(to, weight));
private void ensureExistenceOf(V vertex) {
if(!adjacencyMap.containsKey(vertex)) {
adjacencyMap.put(vertex, new ArrayList<Edge<V, W>>());
public List<Edge<V, W>> getEdgesFrom(V from) {
return adjacencyMap.get(from);
// other methods
public String toString() {
if(adjacencyMap.isEmpty()) return "<empty graph>";
StringBuilder b = new StringBuilder();
for(V vertex: adjacencyMap.keySet()) {
b.append(vertex+" -> "+getEdgesFrom(vertex)+"\n");
return b.toString();
class Edge<V, W extends Number> {
private V toVertex;
private W weight;
public Edge(V toVertex, W weight) {
this.toVertex = toVertex;
this.weight = weight;
// other methods
public String toString() {
return "{"+weight+" : "+toVertex+"}";
}Note that I didn't comment it, so you will need to study it a bit before you can use it. If you have further question, feel free to ask them. However, if I feel that you did not take the time to study this example, I won't feel compelled to assist you any further (sorry to be so blunt).
Good luck. -
Is there any hope for Help Viewer?
I have read through as many discussions about Help Viewer problems as I can find, and still, help in Finder doesn't work. I have tried all of Dr. Smoke's suggestions and many others to no avail. Help Viewer still ends up going back to a blank screen, links that don't work, and the search just keeps searching.
All of the suggestions I have tried fix Help Viewer temporarily, but it has always gone back to its same old broken self.
If anyone out there can REALLY help, I would REALLY appreciate it.
Thank you!Hi Jordan. Hopefully I can offer a solution for this which bugged me enough to really try to resolve it, and have now done so, at least for me.
First the essentials.
System Setup: Powermac G4 Dual 1GHz MDD. 1GB. MacOS 10.4.3
Issue: Loading Mac Helper from the Finder will result in a blank screen after the first launch. On first launch you will be able to click one or two links then it will not work and search will not function [issues may vary but blank screen always]
This problem occurred with earlier versions of Tiger. I have since done a clean install. Tried replacing the Help Viewer app from the Install disk and also the MacHelp.help document too, but it did not help. I even tried the same items from other disks just to check for corrupt files but still no change. Trashing the prefs does not seem to make any difference, nor the same with the cache folder but it can resolve other issues, just not this particular one.
NOTE Before others try this fix I strongly suggest you try the solutions suggested by Apple and those on the very good XLab web site. Here are a few related articles:
XLab. The most comprehensive guide to the Help issues.Check out the 'Help Viewer displays a blank window.' link.
http://www.thexlab.com/faqs/helpviewer.html
Apple. From the source. Not quite the same symptoms but offers Help advice on
'Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits'
http://docs.info.apple.com/article.html?artnum=107013
Solution:
1. Go to User > Library > Caches > com.apple.helpui [note: you need to launch Help Viewer at least once so that this folder is created]
2. Delete ALL files/ folders in the com.apple.helpui folder, if any.
3. Create a new folder inside com.apple.helpui and name it 'Mac Help' [the same as that created automatically by Help Viewer, case sensitive].
4. Select the new folder and use Command + I to see the folder 'Info'. First
label it red [to aid further diagnostics] and then change ALL the permissions at the bottom to *Read only* [click Details to see the options, not just 'You can'. Include Read only for 'Owner', 'Group' & 'Others'. You will need Admin access for this]. Close the Info panel.
5. Launch Mac Help from the Finder menu bar. If it was blank before, the Help Viewer screen should show the Mac Help homepage again. Try several links and search and Index. They should all work, and quicker now. Quit and relaunch. This time the Help Viewer works now and no blank screen. The issue with Mac Help is fixed ( but be aware that any other Help folders created could well cause the same issue, so check for these if it still happens and read on for details of how to deal with this other part of the issue)
*BUT*
Although this resolves the Mac Help issue, AS SOON AS OTHER MAC APPLICATION HELP's ARE LAUNCHED, IT IS MOST LIKELY THE ISSUE WILL RETURN!, hence the labeling of the Help folders red, to track newly created Help folders (i.e. Mail Help, Safari Help etc). If these are launched this automatically creates help folders in com.apple.helpui for them and they also cause the blank screen problem.
So, the best thing is to create Help folders in the same way that you did for Mac Help, for ALL Mac applications to avoid having to do it incrementally as and when you use another Mac application Help [or if you do a search it may well create folders anyhow]. These are the Help folders I have created, with the red label and 'Read only' permissions:
Activity Monitor Help
Address Book Help
AirPort Help
AppleScript Help
Automator Help
Bluetooth Help
Calculator Help
Chess Help
Console Help
Dictionary Help
Directory Access Help
Disk Utility Help
DVD Player Help
Font Book Help
Grapher Help
iCal Help
iChat Help
Image Capture Help
Mac Help
Mail Help
ODBC Administrator Help
Preview Help
QuickTime Player Help
Safari Help
Script Editor Help
Sherlock Help
Stickies Help
System Profiler Help
Terminal Help
TextEdit Help
There are probably more but these are the ones I could find fairly easily. If they are labeled red then it is easy to see if any others appear and cause the issue. Once I have done this I make a backup copy of these folders with the permissions set and archive it for use as and when I need to replace them.
Result: For me and my setup this has resulted in my being able to use Help normally without the blank screen issue for nearly two weeks now since I spent a lot of time looking at this issue. In fact I find Help works a lot faster and suffers fewer delays. Because this only requires amendments to file permissions, in a folder which is automatically replaced if deleted anyhow, I feel it is a safe and easy enough for most users to do if they have this problem.
I hope this offers a solution to other users with the same issue and who have tried the other suggestions (Including Dr. Smoke's and from Apple etc) but still have problems with the blank screen.
The Cause & Other Notes
Having been frustrated with this issue for several months now I spent some time trying to find the cause. It clearly does not effect everyone, and others have found the suggested fixes, such as trashing the com.apple.helpui cache folder and relevant preference files, have worked for them. It makes it a more complicated problem to identify. It appears perhaps to be related to your type/ speed of connection from the computer to the Apple help servers where the cache folders and files and downloaded from. This seems likely from error messages. It also appears that, for whatever reason, some of those files being automatically created when Help Viewer is launched are the actual problem. In order to explain why I think that, if you have this issue then you should get the exact same repeatable test which led me to find the solution.
Do this:
1. Firstly navigate to > Library > Caches > com.apple.helpui and trash this folder. Then before proceeding launch the following apps to help diagnose and follow what is happening:
a. Console [so you can watch for error message in console.log window]
b. Activity Monitor [to watch internet traffic during launch and browsing the Help Viewer]
c. Leave the FInder window so you can watch what happens.
2. Launch Mac Help from the Finder menu bar. It should launch and show the home page on the screen. Immediately you will see a new com.apple.helpui folder being created. Navigate into this so you can watch what is being placed in the newly created com.apple.helpui folder.
3. Now click on any of the Help links on the right (not the link to the apple web site). Immediately (slower if dialup and not already connected) you should see traffic over the network as the computer connects to the Apple help servers. Then, in the com.apple.helpui folder you will see a new folder called 'Mac Help'. Also some other numbered (0-15) cache folders which are not of interest right now. And on quit a file called 'TOCCache.plist' which does not effect things. Soon you should see an error in the Console console.log window something like this:
"2005-11-19 01:57:45.585 Help Viewer[1313] Exception raised during posting of notification. Ignored. exception: * End of archive encountered prematurely at 400"
I am not sure exactly why this is but it appears to be related to some sort of timeout and failure to fully download some items.
4. Now try to click on any link or Index. For me, nothing happens and I get only more error messages like:
"2005-11-19 02:02:21.190 Help Viewer[1313] Uncaught exception - * End of archive encountered prematurely at 400
2005-11-19 02:02:21.190 Help Viewer[1313] * Attempt to remove unrecognized exception handler 0xbfffdce0"
The only option is to quit out.
5. Immediately relaunch Mac Help. If it is like me then it will now be a blank screen accompanied by the following my critical error message:
"2005-11-19 02:03:33.543 Help Viewer[1319] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 375df0 and selector '_setupTOC'"
Now, everytime I quit a launch Mac Help it is the same error and blank screen.
This seemed to me to point towards an issue within the com.apple.helpui folder because when it is trashed Help Viewer will launch one time then stop.
So I went through each folder (I had a number of Help folders the first time) and tried moving it out of the folder, rather like testing for bad prefs in OS8.
Eventually I tracked the offending file/s down to this:
User > Library > Caches > com.apple.helpui > Mac Help > Contents > Resources > English.lproj > pgs > pgs.helpindex
As soon as this file is created then it all stops. Trash this file and relaunch and the homepage appears again until it appears and once again the problem reappears. This is totally repeatable for me.
Once I had isolated the problem file I tried various solutions to resolve it. The first was to replace it with the same file which is already in the System within the MacHelp.help documentation here (the system Library, not the User path)
Library > Documentation > Help > MacHelp.help
Copy MacHelp.help and then use Command + I and 'Show Package Contents' to navigate to:
MacHelp.help > Contents > Resources > English.lproj > pgs > pgs.helpindex
(right at the bottom of the pgs folder with hundreds of .html files)
I then replaced the existing pgs.helpindex with this one. It is different at it has an earlier Created date of 16/03/2005 (my vary), the one in the cache folder is Created 20/10/2005 (may vary?)
This allowed Help Viewer to launch correctly, but after a short time and re-launch it returned to the blank screen. Examining the file showed it was being overwritten by the later downloaded version, the one causing the problem. This led me to change the permissions to 'Read only' to prevent it being overwritten and after this the Help Viewer worked normally on relaunches.
I also changed and altered the permissions on the pgs/pgs2.helpindex folder in the same directory as the pgs folder as it seemed to also cause a problem.
So, finally I resolved the problem, with no error messages, the Help Viewer loading correctly and a working Help. However, I noticed that after a while the blank screen came back. Knowing the pgs.helpindex was OK it seemed likely that other .helpindex files in other Help folders created in the com.apple.helpui folder. This proved the case because, on trashing the new Help folder, it launched again. Swapping the downloaded .helpindex in say, Mail Help, and changing the permissions fixed it, until another Apple application Help folder was created and it re-occurred. The problem does not occur with all the Mac application Helps, but with some (notably for me, Mail Help, Safari Help and some others).
Finally I found that rather than digging into the apps contents I could get the same fix and also quicker Help browsing by simply creating the actual Help folders as described above and ensuring the .helpindex (or other folders/ files like idx) was not created.
From nearly two weeks trials it so far appears to completely resolve this issue.
Just be aware of any new Help folders/ files being created.
The are a few other observations:
1. I tried just altering the permissions on the actual com.apple.helpui folder to 'Read only' but whilst it allowed the Help Viewer to open fine, it broke links within the application Help windows.
2. I have not tried many Helps on other non Apple applications. I find that Toast help triggers error messages:
"2005-11-19 02:27:02.229 Help Viewer[1340] -[IdxSearchController openIndices:] caught a VTWIN exception. Bad index file is /Applications/Toast 7 Titanium/Toast Titanium.app/Contents/Resources/English.lproj/Toast Help/Toast Help idx
It is not possible to change the 'Toast Help idx' as it is an exec file. The errors do not seem to break Help Viewer. I had similar error messages from Quicktime Help when it loaded. I suspect that the Toast help is broken for similar reasons as mac Help b (it works for links to installed pages but not external ones). But it could be from the alterations to the Help folders. Either way at least Help works.
3. It is possible to get most .helpindex files from the relevant application contents but just using the Help folders is a quicker solution.
4. I can't help feel that the difference between those that have or do not have these issues is a slower connection, i.e. non-broadband. I have a 64k ISDN connection through a router which is pretty much 'always on' with solid 7KB speeds, but it seems this is insufficient for Help to work properly. I read elsewhere that connection speed appears to be an issue and Help is sensitive to this. It would be interesting to know what type of connection people with the issue have. I also have a hardware firewall in the router which may be a factor but it does not stop any other normal traffic and allows the files through anyhow. It has been in place for 6 years and with no issues. Just wanted to note it.
5. Certainly for my situation, it appears that the files being downloaded from the Apple help servers are actually causing the problem at my end. I can't explain why or how other than the tests explained above are repeatable and that using the same file but from the System file resolves the problem. It remains unclear why a slower connection would lead to files downloading which affect some people but not others? It may be something totally different of course but the error messages in Console do seem to point towards this.
6. I imagine the reason why the files and folders are downloaded are to ensure that they are kept up to date, as the pgs.helpindex for instance is a later creation date. However I do not seem to have any problems browsing or looking at topics, especially with the 'Include product Support Searches' option selected in the Help View menu. It means that there is extra traffic but gives a wider range of responses from Apple. Perhaps it is better to deselect this option if you have a slow dialup connection?
Summary
I hope that this solution can help others with this issue and perhaps other related problems. There is no way of me testing it further and I do not know how others who seemingly do not have a problem can check this. I just know it resolved it for me. I am no expert but a long time Mac user who is used to simple and elegant functionality, not the ongoing saga of the current Help, and wanted the thing just to 'work'.
Good luck
Simon
Maybe you are looking for
-
I just got my iPad air and I'm still trying to learn how everything works. I have a contact list that somehow connected to Facebook or other various places and synced. The problem is they are not contacts that I need or want on my iPad. I've tried go
-
Erro perforing Fast Refresh of Materialized View.
Hi Experts, We are facing serious problem while refreshing materialized views using fast refresh option in ORACLE.. For the very first time we are performing Complete refresh of data from DB1 to DB2 for few tables.Ongoing we are performing Fast Refre
-
I downloaded ios7. I am locked out. I didnot set a passcode. What passcode do I need to get in?
What passcode does ios7 want? I don't have one set.
-
Iphone 4s calender one day off last week in October and beyond
My iphone 4s for the last week in October and beyond is one day off(ahead of schedule) after syncing with outlook?
-
How do I insert an object in an array?
How can I insert an object in an array of variable size? I input two numbers from keyboard 1 2that form the following object (Pair) (1,2) how can I add such objects to an array private Pair s[]; e.g. public PairList(int x){ top = -1; s = new Pair[x];