Help identifying a problem with G72 b45eb on start up

i have hp 72 b45eb running on windows 7. four years old no issues until now
i can start it up in safe mode, access everything, already reinstalled the drivers and implimeted a system repair.
every time start the pc up it runs trough normal windows startup.
then once the windows logo disapears the screen stays black.
it just runs like that until i plug in a external screen. then the blue screen jumps on.
need help finding the source af this problem and if you have it fix.

It is a problem with the video card, which likely means the motherboard. I would try a system recovery before thinking about hardware replacment, however. If you do not want to do that I suggest you run a video driver removal program to take it back to where the video shows as standard vga, which will probably work, and then install the latest video driver for your chipset.
http://www.guru3d.com/files-details/display-driver-uninstaller-download.html

Similar Messages

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

Try Resetting the System Management Controller (SMC)

Can anyone help; re: Faxing problems with my 6200 all in one

Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
when a fax is being received or when we are sending one. When the fax fails and we stop the blinking lights, it self tests then turns off. Sometimes when it does this we get an error message printed that says "Power Failure." The party being faxed gets 1/2 a fax or 1 page out of 5. I'll unplug it from the electric and plug it back in and then it will work fine for a day or two. We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't. We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
Any ideas??? The machine is 5 years old and has never given us any trouble until now. Is it time to upgrade?
Thanks so very much!!!!
Joanne

I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA, using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

Need help identifying what problem this is

Hi
I just want to know if:
Is this a common problem with LCD Monitors?
What is this display issue called?
Is this fixable? If so, how?
I know this is a monitor issue because I've tried many troubleshoots.
Please answer my questions above, I don't prefer replacing my monitor yet. Also, I couldn't take screenshots because the lines or dots don't appear to other users so I used a camera.
Blue lines or dots in some areas. I think they are consistent in bright areas. Captured from my background wallpaper. Pink lines or dots in what I suspect dark areas. Captured from a game (League of Legends)

What effect after 10 seconds? There's a scale/jitter effect then an over exposure effect with fades to black and there's a blue light streak? You mentioned brush strokes so I think it's the light streak.
For that you can use Beam, or small solids stacked on top of each other with various blurs and blend modes set to Add or Screen and a lens flair, or a half dozen different particle effects, or . . .
Catch a still frame and show us what you're trying to achieve and we can help more.
or ??

Problem with TouchSmart tx2-1275dx Starting. Help!

Hello all,
I am having a huge problem with my pc! In the last week, I have had to do 2 system recoveries on my computer after I receive a message at startup that says that my pc has failed to start windows, which may be due to the last shut down or a software change. Now I havent messed with either of those and when I try to start windows normally, it tries to start up but then goes right back to that screen and the only way I have been able to get around that is to do full system recoveries and restore the pc to its factory settings. Does anyone have any idea what is causing this? I dont know if I have the energy to go through this a 3rd time! Please help and thank you!!!

I wonder if you have WIndows Update turned on as "automatically download and update", some timesmultiple hotfixes and service packs may mess up the os. If this stops with windows update turned off, then set windows update to "download but let me decide when to update", and review what you are updating first. And apply the necessary ones only, one at a time.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Help...problem with my Modem - Dial Up connection

Hi...I having the following problem with my Powerbook G4 1Ghz Titatium. Hope you can give a hand.
I am trying to conect to the internet with dail-up but the System Profiler utility says that "Modem Driver Not Found". I went into Network Preferences, and into Network Port configurations and the option of "Internal Modem" simply does not appear. What can I do?. I have been trying to find any installer for the modem but no lucky so far (I have the OS 10.3.9). I can imagine that the drivers were deleted.
Any help will be highly appreciated. Greetings from Mexico.
Jorge

Sounds a bit like my problem mate....
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=06323
Device Manager: Start --> Settings --> Control Panel --> System --> Hardware(tab) --> Device Manager.
The error i'm getting is:
The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click Reinstall Driver.
anyone know how to resolve this? it searches the cd for the drivers and cannot find them. What kind of files are drivers?
Thanks
Ewan

Can anyone help me? Problems with external mixer?

Hey all,
First off i would like to say hey to everyone as i am new so i hope someone out there can help me and me likewise in the future.
Onto my problem. I recently bought an Alesis Multimix 8 USB and i am having a few problems with my iBook recieving the left and right signals from the device. I am currently running it through Ableton Live however when it recognises the mixer it says that there is only one input, the left one.
For the work i am trying to do i would need the left and right inputs to act as seperate channels into Live. When i first bought the mixer it worked fine and Live read 2 inputs easily however now for some reason it has stopped seeing one.
I think it may be a problem with the audio software in OS X 3.9 but i am not sure, i am trying to repair what i can however it seems to me that the only option i may have would be reinstalling 3.9 again from scratch.
If anyone has any ideas about what could be wrong or how to get the 2 inputs back i would be very grateful.
Please help me as this is driving me mad!
Cheers
Jon

Hi Jon and welcome to Apple Discussions.
I cannot pretend that I know anything about your subject but a couple of non invasive things you can try before resorting to a re-install. (Usually a last resort with Macs).
1) Have a look at Audio MIDI setup in your Applications>Utilities folder and see if there is a setting there that with resolve your problem.
2) Create a new user in System Preferences>Accounts.(always a good troubleshooting measure this, whatever the problem). Log out of your own account and into the new. Does the problem persist? If it doesn't there'll probably be a preference file somewhere to do with the device you are using.
If the problem does persist then it could be the unit itself, the lead (have you tried a different one/port?), or - worst case scenario- a hardware/sw problem with your iBook.
Not a lot of constructive help, I'm afraid, but some avenues to explore…
Best of luck,
Adrian

Help me please, problem with image transition

Hi everybody,
For the past few months I have started teaching myself how to use dreamweaver. So far I have had a couple problems my limited knowledge just cant figure out and hoped somebody out there could shed a little light on it.
I am currently making a small portfolio site for my girlfriend but am having a few problems with trying to get the gallery the way she wants it. She want a black and white image to transition into colour on mouse over with small textbox to appear on mouseover also. I could not create a simple rollover image as she wanted the fade in and fade out to be slightly slower.
The rather simple idea I had for this was to create a div with a background image which would be the colour version. A black and white version imported over the top which transitions out to 0 opacity on mouseover.
The problem I have is when the mouse is removed and the mouseout behavior begins to bring the black and white version back. If the mouse is moved over image too quickly there seems to be a conflict between the 2 transitions and it begins to jump a little. You can have a look for yourself:
http://www.emmatait.com/gallery.html
I thought maybe if there was some code I could write in that would only make the mouseout behavior begin after all other functions were complete it would solve this but unfortunately I have no idea how to even go about this.
Any help would be appreciated.
Thanks all
Adam

Hi Adam,
In my opinion using image swap behaviors is counterproductive. It makes for slower loading pages and consumes bandwidth. This can be a problem for mobile device users who often pay for bandwidth usage.
I'm going to show a neat CSS trick for de-saturating color images. When you hover over the images, they turn to color and their opacity increases to 100%. Click on images to bring up the full size photos with captions.
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

Need Help, crazy HDV Problem with Final Cut

Hi Guys, first thanks for looking my problem.
I have a new Macbook Pro 2,4Ghz with 4GB RAM and Leopard 10.5.4
So also I have Final Cut Studio 1 updated on 5.1.4.
My problem: As i captured HDV Material i saw in Quicktime, that there are many fragments, more terrible then hdv compression.In Final Cut 5 the same. So i was looking for an other Mac, so i've found an G5 also with Final Cut 5.1.4 and Tiger OS. But there i saw nothing, no fragments, all good(same material).
So i think its a problem with between macbook pro,leopard, hdv and final cut 5.1.4
Can anyone help me, im also able to give you a screenshot with the fragmets. There are very strong to see in the grey colors.
Thanks

http://www.bilder-space.de/show.php?file=Gqur6a5PA7NZW2K.jpg
here is a screen from my problem, thats nomal resulution ... HDV in Final Cut, look at the fragments left and right, thats not normal !
Message was edited by: jenderbender
Message was edited by: jenderbender

HELP! Serious problem with CD import!

I have been using iTunes for two years now and I have encountered a problem I have never had before. I am trying to import a CD, but when I import it and listen to it on iTunes it skips and sounds terrible. When I play the CD on a CD player it has no problems with skipping. I've checked for dirt and scratches and there are none. The CD does have extra CD-Rom content on it, could this be a problem? I used the error correction feature on iTunes, it helps a little but the tracks still sound terrible.

Its protected most likly. Some protected CDs don't stop a program from ripping it completely but cause the ripped song to skip.
What you have to do if its a store bought protected CD, is use the program it recommeds using to rip to the PC (Most likly Windows Media Player) then use that program to burn the songs to a blank CD.
Put the newly created burned CD back in the PC and use iTUnes to import it

HELP! having problems with the organizer of mediasourc

hi, i am currently having problems with the organiser view of the mediasource 5. the player view is ok. the explore panel keeps blinking and after a while the mediasource auto closes. this has not happened before during the past weeks. also, another weird thing is that previously when it didn't work, a microsoft error appeared. now it just closes without any message. hope you can help, thanks!
oh yar, anyway, whats the email adress of the email support?

What were you doing with the software when the problem occur? A detail step by step description of what you have done is useful.
i was playing music? haha...
first i opened the mediasource(organiser view), then, the explorer panel started blinking like mad... then teh thing auto closes, or a window pops up telling me that there is an error( the usual microsoft error...) then when i click don't send, the mediasource closes...
Did you connect any Zen MP3 player when the problem occur?
sometimes i did, sometimes i didn't. incidentally, do you have to connect an mp3 player to use mediasource?
What is the exact version of your MediaSource 5?
wait lemme check... 5.00.20
What is your operating system? What is the language of your operating system?
my operating system is windows XP, and the language is english.
hope my info has been useful...

Please Help?! Problems with Viber for iPhone 4s

Please help!
I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
If anyone is able to help me out it would be much appreciated! Thanks

You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

Help! Quicktime++ problems with new imac.

I just got a new intel 20" imac. For some reason, none of my web browsers (safari and mozilla) have a problem with Quicktime. Every single website I visit that has video content shows up as a broek Quicktime icon. Is there any fix for this?
The other issue I'm having is that the characters in my address book look mangled. Is there a fix for this as well?
My last issue is my external Lacie Hard drive. It worked perfectly with my old Powermac G4 but my new imac wont recognize it and I only get errors whenever I plug it in.
Any help with these issues would be greatly appreciated.

My help may be minimal but here it goes.....are they windows media files you are trying to open? Try downloading and installing flip4mac and see if they will open then.
http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
You didn't say what model you had or how old the external drive is, but you could try a driver update on lacie's website. Hope this helps a little.

Help identifying a problem with G72 b45eb on start up

Similar Messages

Maybe you are looking for