Help iFelix! Mac Prints/PC does not on AX

I've gone through pages and pages on this forum and gone to the links put up on iFelix's web site regarding set up via the PC, via Bonjour, etc. I've tried them to no avail. The mac prints fine. I get internet access via AX on both computers but I can't print on the blasted Epson PhotoR260 from the PC (using XP - Home). Besides using a sledge hammer on the PC, any ideas? Anybody??

See my other post about setting up your printer as Generic in Bonjour. It works!

Similar Messages

Help My mac book pro does not start

i have a huge problem becauce i cannot start my mac book pro, i turn on and apear the gray screen with apple logo and round progresive bar, but just not have any change it cud be hours or days its the same, i already try to restore it by the comands (command+R) or (shift+caps lock) when i turn on my computher but alwais same logo screen, please i need help maby im doing someting wrong

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Clicking on a link in Mac Mail Firefox does not open in front of Mail--it used too. The link does open but I have to click on the Firefox icon in the Tray to bring it to full screen. Can you please help

clicking on a link in Mac Mail Firefox does not open in front of Mail--it used too. The link does open but I have toclick on the Firefox icon in the Tray to bring it to full screen. Can you please help.

Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.

Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP.

Finder & Dock do not work - Mac Hard Drive does not appear on Desktop

Until yesterday, my powerbook was working properly.
This morning, I wanted to use it and I had the following problems after login.
1/ My Mac Hard drive does not appear on my dekstop
2/ My dock appears but no icon works when I click on them. So, I can't open finder. I have no response.
3/ Furthermore, my top bar (with clock, login name, Airport icon...) appears but it is frozed.
I try several solutions as :
- rebooting in safe mode,
- rebooting, with in the same time, hold different keys (option, apple, p & R)...
As of today, no solution works.
Thanks for your help.

A.CHAMP wrote:
Nota: if i used my daugther login (she is not admin), I have the same issues.
Ok, that's good enough. You may be able to repair this with the 10.5.8 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
EDIT:
I have around 5 Go space left on my Mac
Also, your getting very low on disk space. Try to copy some of the data off to other media. *Do it before you try applying the combo, you'll need the space.*
-mj
Message was edited by: macjack
Message was edited by: macjack

Epson r800 prints, but does not appear in Printer List: can't use Utilities

My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)

For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

RH7 - Custom WebHelp Pro skin custom "Print" button does NOT display in version published to RH Server 8

I customized a WebHelp Pro skin using the Omega skin as the basis. Everything works fine except the Print button, which I added using the same Action as shown in the BeautifulVista skin's Print button.
Local Version (C: drive)
When I generate my help project and view it locally from my C: drive after I accept the warning about viewing locally, I see the Print button.
However, it does NOT work. I've attached a graphic that shows the local version and the skin dialog where I set up the action for the Print button.
RH Server 8 version
When I view the same project after I publish it to the server, the Print button does NOT display.
QUESTIONS ARE:
How do I get the Print button to function properly (active printer dialog)?
If it can't work until it is published that fine but then how do I get it display when I view from server?

Hi there
Have you tried editing your Window Definition?
Click View > Pods > Project Setup
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How do I print from a printer that does not support airprint?

I have an ipad and would like to print photographs and e-mails from it via my Lexmark Pro901 wireless printer which does not seem to support Airprint, Can anyone help please?

Lexmark has an app I believe.
Or you can look into third party apps. I use Print n Share, but i also see print central and printopia recommended

My Mac OS X does not restart while trying to update/install

My Mac OS X does not restart while trying to update/install iTunes. It allows me to click on Restart button, then just the screen saver shows up, waited 10 -15mins and nothing happens. Had to force shut to try again, same thing happens.

As a test, try opening the PDFs using Preview and see if they will print correctly from that application. If so, then it is likely an Acrobat problem. If they still don't print correctly, it is like a file problem.
You can also try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

InDesign CS5 - Print Dialog does not load (windows).

I just installed InDesign CS5 and when I go to print a document, the print dialog does not come up. I only get an hourglass cursor. When I try to export to a PDF the resulting PDF is 0kb and obviously corrupt.
What do I do to fix this?

Don't have a clue about the print dialog, but you may be unaware that PDF export is now a background task and you may be trying to open the PDF before it's finished. To check the progress go to Window > Utilities > Background Tasks.
There are some reports of the background task stalling in certain cases. This is a bug, Adobe is aware of it, and a solution is in the works, but no definite inopfrmation on a release date for the fix is available. If you search the forum you'll find a couple of threads discussing it, including a link to a script to do the export inthe foreground if necessary.
For the print problem, you can try Replace Your Preferences, but I'm not hightly optimisitic that this is a prefs issue. It would help if you told us about the OS and your printer, and what language you installed. Have you updated to 7.0.2?

The print tab does not work in mapquest

The print tab does not work in mapquest

You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Help iFelix! Mac Prints/PC does not on AX

Similar Messages

Maybe you are looking for