Help! iMac Start up issue

At start up I am getting a gray screen and in the top left corner I'm getting this message. sh-2.05a#
I've tried to start in safe mode, but have not been successful. I don't know if we're running OS 9 or X. I think we are running 9.? but it also has X. We bought the machine about 4 to 5 years ago.
I certainly would appreciate any help.
iMac G4 Mac OS 9.2.x

Hello lynneke1:
Welcome to Apple discussions.
I have not used OS 9 in years so I am not any help there. You might post in this forum:
http://discussions.apple.com/category.jspa?categoryID=99
to see if someone using OS 9 may be able to help.
If you are running OS X, the first step would be to run repair disk from your software install CD/DVD.
Barry

Similar Messages

OSX 10.7.4 iMac Start Up Issues

After starting up my imac OSX 10.7.4 the magic ball appears to be spinning a while while i access my system preference and other menu items. why is that happening?

You don't have a PPC iMac which is where you posted your question.
I will request that the mods move it to correvt forum.
Allan

Please help; iMac G5 connection issues.

Hello,
Granted this is not the first time I have had frustrating network troubles with these units, however this time I just can't seem to fix it.
We are running a couple iMac G5's 1.6 GHz, 512mb ram w/ Mac OS X 10.4.11, both have airport cards installed and have worked on the network before.
As of the other day they both decided they no longer wanted to be on the network and just sort of dropped off, nothing was changed on the computer end or the modem end. I have attempted running network diagnostics, resetting the modem, recreating locations, powering off for extended periods and even so far as to do a tcpdump with terminal commands. I just can't understand why these machines have such problems with networking and why it has to be so extremely frustrating to troubleshoot. Can anyone please help me with a run through of what this could possibly be and maybe a step by step to fix it, I may just be dumb or missing something but blah.
Thanks much
-G

Change your router channel number. Most times this works & is all you have to do. Insturctions are inside your router user manual.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
If you are using one of Apple's routers, run the Airport Utility app which is located inside the Utilities folder. If using a 3rd party one, read its user manual and/or contact their customer support department/website.
=====================
If using Apple's Airport, please re-post over in one of the AirPort Forums.

MAJOR Start-up Issues: Can my imac be saved?

Hello all-
I sure hope someone can help me. I am really worried about the state of my imac. It is only ONE YEAR old and has always been maintained with the latest updates.
Quick background: A few weeks ago, while in screensaver mode, I returned to my mac to find a white screen with a folder and a question mark. I had never seen this before! It was frozen. I had to force shut down by holding the button on back. Since that time, the same thing has sporadically happened when the computer was in screensaver mode. In the last few days the problem has worsened with start up issues. Yesterday, when i started up the computer I kept getting just a blank white screen and what sounded like "a slow revving" of the disc several times and then nothing. After continually trying to restart (including in Safe Mode) eventually I got the apple logo and it started. When that happened, I immediately backed up everything for fear my hard drive is dying and then began to troubleshoot.
What I've tried: After looking through the threads I have tried a number of suggestions.
- I repaired the Disk using First Aid (it says all was Okay)
- I repaired permissions
- I disconnected all cords & reset the SMC
- I booted from the disc & ran the Extended Apple Hardware Test (it said all appears Okay)
After doing these things last night, the computer started up several times just fine so I shut it down for the night.... which brings me to this morning!
Start up was MUCH worse than yesterday. Same slow revving sound, white screen and nothing (at least 10 times) - even when trying Safe Mode. Then it worsened to a black screen and no sound at all - as if nothing was happening. I thought it was dead! I unplugged the power cord for 15 seconds and tried again - this changed it back to the white screen and a sound of more revving power. After about 3 tries, I got the apple logo and the spinning wheel for about 2 minutes - then it started!
This is where I am now. I am afraid to turn it off and not sure what else to try. I thought after all I did last night, the problem was fixed. Why does the hardware test and repair disc say all is fine? And why after doing those things last night did it start up numerous times? (and speedy too!) But then this morning I'm back where i started.... ? How can I troubleshoot this problem further?
I would really like to try everything before resorting to taking it in. Money is tight right now.
GREATLY appreciate any advice!
Thanks a lot,
Karen

Warning!! ** (See bottom of post)
New Development: From Disk Utility, I chose to run "verify disk" again. (Somewhere I had read that sometimes, it needs to be run a few times before it will find a problem with the disk).
Sure enough! This time I got errors and it suggested I repair the disk!
Errors in verify mode were in RED as follows:
Invalid index key
The volume Macintosh HD needs to be repaired
Error: Filesystem verify or repair failed
I then restarted with the system disc, opened First Aid and chose Repair.
The following showed up in RED during the repair process:
Invalid index key
Incorrect number of thread records
Invalid directory item count
volume bit map needs minor repair
Invalid free block count
volume header needs minor repair
And finally in GREEN (after 10 min):
HD Repaired Successfully
** After doing this, and trying to restart, i get the white screen and the spinning wheel indefinitely. (even when i try Safe Mode) It appears I can no longer boot my HD. I wanted to share the errors above incase it brings anyone to any further insight, but I'm not so sure it helped my situation.
Suggestions?

IMAC start issues: black screen and required to enter EXIT.

At iMAC start I get black screen with Root directory and requested to enter EXIT to continue. This happens very frequently. Can somebody help me to solve this issue? Thanks

I would suggest booting from the Recovery partition, choosing Disk Utilities, then running Repair Disk and Repair Permissions. See if that clears this issue.
Others may have suggestions, but if the above doesn't work you may need to reinstall Mountain Lion...again, from the Recovery partition.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!

I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!

Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS2570 Please help me in this issue. when I use C hold down when mac start nothing happed

Please help me in this issue. when I use C hold down when mac start nothing happed

This causes the Mac to boot from the DVD drive. Hold the C key down between the startup tone and the logo.
(the shift key is not required).
Another way to do it is to hold down the Option key during boot and the bootmanager will show you all the possible boot devices and you can pick from there.

My PC can connect to the airport extreme but with encryption it cannot connect to the internet my iMac has no issues, any help.

My PC can connect to the new airport extreme I just purchased but with encryption it cannot connect to the internet my iMac has no issues. If I open the airport exteme up and provide no security everything is fine which leads me to believe it is something with the encryption between the two devices. Not sure what step I'm missing here this shouldn't be this difficult.

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

Please Help :( iMac 20" refuses to boot up with anymore than 1gb ram?

Please Help iMac 20" refuses to boot up with anymore than 1gb ram? It was fine 4 days ago and had been working with a 1gb stick in one slot and a 2gb stick, which had replaced the orignal 1gb stick that I got it with, in the other and it had shown 3gb of ram and was working just fine with that since November? It went to sleep briefly 4 days ago while I was waiting on a customer and I came back to try to wake it up and it never would forcing me to hard boot it. When I did that it would only go to a black screen with a solid white light on the power indicator. Over and over again and same thing. I read and tried every suggestion I could possibly find in this and a few other mac forums to no avail.
I finally after reading about RAM issues etc. I decided to power off and take out the ram sticks and try them one at a time in each slot. So I took out the 2gb stick and did the SMC reset and it would boot up and work just fine with the 1 gb of ram. So then I went through the same process with the 2gb stick and it would not boot up only go to a black screen with white solid light again (NOT flashing). So then I tried the other original 1gb I had replaced with the 2gb and it worked just find like the other 1gb. So then I tried just 1gb stick in the other ram slot (back facing one) and with just the 1gb strip it booted up and worked fine. Tried it with the other 1gb stick and once again that one too worked just fine. So I determined it wasn't the slot itself I thought? I then tried the 2gb in the back slot and it would not boot only go to the black screen white solid light deal like before. So I thought well ok it's obviously the 2gb ram must have somehow went bad (even though I have only had it since November) and I thought well I will just use the (2) 1gb sticks in each slot and then that will at least give me 2gb because only 1gb really ***** LOL. So I proceeded to go through the same shut down process installed both sticks (I always push them to I feel them click and my fingers have a nice indention on them) reset the SMC and turned the power one and.... It would only go to the black screen with white solid light on power indicator???? I went through the same above process at least 3 times and again today a few times and I can't figure it out and I tried to search and search and I couldn't find anything like what I am experiencing.....What happened? Please help this slow Imac is killing me. It will work with 1gb ram only nothing more? Here are the specifics of my Imac.
It is a 20" Late 2006 Intel Core 2 Duo 2.16 ATI Radeon X1600 256 MB graphics card and Ram with now only 1gb (did have 3gb) and I am running OSX Lion 10.7.5
When I go to system report and go under memory it shows this:
BANK 0/DIMM0:
Size:          1 GB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
Manufacturer:          0xCE00000000000000
Part Number:          0x4D342037305432393533435A332D43453620
BANK 1/DIMM1:
Size:          Empty
Type:          Empty
Speed:          Empty
Status:          Empty
Manufacturer:          Empty
Part Number:          Empty
Serial Number:          Empty
Any help I can get would really be appreciated. Thanks in advance
ALSO...Here is also a pic of the system log right before it happened. It even changed the date to 07/2014????
I have some more if needed???????????????
<Personal Information Edited by Host>

The Memtest just completed and came back like this? It only test the single 1gb chip because anything more in this computer it won't go past the black screen with solid white power light.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
NOTE: No command-line arguments have been specified
Using defaults: Test all available memory, one test pass, no logfile
Mac OS X 10.7.5 (11G63) running in multiuser mode
Memory Page Size: 4096
System has 2 Intel core(s) with SSE
Requested memory: 250MB (263086080 bytes)
Available memory: 250MB (263086080 bytes)
Allocated memory: 250MB (263086080 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 125MB (131543040 bytes) starts at local address 0x0000000101000000
Buffer B: 125MB (131543040 bytes) starts at local address 0x0000000108d73000
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 250MB region...
Stuck Address       : ok
Linear PRN          : ok
Running comparison tests using 125MB buffers...
Random Value        : ok
Compare XOR         : ok
Compare SUB         : ok
Compare MUL         : ok
Compare DIV         : ok
Compare OR          : ok
Compare AND         : ok
Sequential Increment: ok
Solid Bits          : ok
Block Sequential    : ok
Checkerboard        : ok
Bit Spread          : ok
Bit Flip            : ok
Walking Ones        : ok
Walking Zeroes      : ok
All tests passed! Execution time: 362 seconds.
logout
[Process completed]
Seems Okay I guess?

Imac start-up

i like it when my imac starts up with NO SOUND. it was doing it and now its not. can someone explain this process to me. the volume control is basically for in and out put devices. iam want the computer (imac) to start up with NO sound at all. the controls for volume does nothing for this or somethings wrong. * also i am getting a sweet smell, coming from the vents below?
Help!

Hello and Welcome to Apple Discussions.
The startup chime volume is set either as a separate parameter set by a utility or if that is not present then it simply takes the main system volume and chimes at that volume.
Did you have a utility like startupsound.prefpane (link) or Psst. I was using startupsound.prefopane but even the Leopard version is been intermittent under Leopard. I wonder if your recent 10.4.11 update has caused a similar issue.
mrtotes

My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

Hi daveormond,
I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
Mac OS X: Gray screen appears during startup - Apple Support
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

My iMac starts up with vertical stripes on the screen

My iMac starts up with vertical stripes on the screen, does anyone know what it could be?

My issue is Blue Strips on start up and its frozen at Grey screen forever > I only successfully log-in on SafeBoot mode only actually while I'm typing this
been looking for solutions until came through your posted , ITS HELP! :-) Thanks to you!
so turn out mine was the LCD or Cable like you said,
What should i do from now ? already been tried many solutions :
Clean installed , PRAM , AHT ,
iMac (27-inch, Late 2009)
OS X Yosemite (10.10.2)
Please, Any suggestion ?

Urgent: PLS help me start the CEP server after upgrade to 11.1.1.7

Dear Legends,
I referred the following doc to upgrade OCEP to 11.1.1.7 http://docs.oracle.com/cd/E28280_01/doc.1111/e14476/install.htm#CHDHHJIA
I executed the steps in 2.8.2 and tried to start the server. But it is not starting up ,instead giving the following error:
Cannot get bundle from registry class com.bea.cie.lconfig.NonDeterministicFeatureException: Oracle Complex Event Processing:11.1.6.0/org.eclipse.persistence_2.2.0.v20110202-r8913, Oracle Event Processing:11.1.7.0/org.eclipse.persistence_2.2.0.v20110202-r8913
class com.bea.cie.lconfig.NonDeterministicFeatureException: Oracle Complex Event Processing:11.1.6.0/org.eclipse.persistence_2.2.0.v20110202-r8913, Oracle Event Processing:11.1.7.0/org.eclipse.persistence_2.2.0.v20110202-r8913
at com.bea.cie.lconfig.internal.RegistryConfiguration.getInputFeatureList(RegistryConfiguration.java:172)
at com.bea.cie.lconfig.internal.RegistryConfiguration.addFeatures(RegistryConfiguration.java:71)
at com.bea.cie.lconfig.internal.RegistryConfiguration.<init>(RegistryConfiguration.java:37)
at com.bea.cie.lconfig.internal.DefaultConfigurationFactory.createConfiguration(DefaultConfigurationFactory.java:17)
at com.bea.wlevs.Launcher.getBundleFromFeature(Launcher.java:749)
at com.bea.wlevs.Launcher.loadBundles(Launcher.java:840)
at com.bea.wlevs.Launcher.run(Launcher.java:266)
at com.bea.wlevs.Launcher.main(Launcher.java:133)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wlevs.Server.main(Server.java:238)
Dear Legends,
I referred the following doc to upgrade OCEP to 11.1.1.7 http://docs.oracle.com/cd/E28280_01/doc.1111/e14476/install.htm#CHDHHJIA
I executed the steps in 2.8.2 and tried to start the server. But it is not starting up ,instead giving the following error:
Cannot get bundle from registry class com.bea.cie.lconfig.NonDeterministicFeatureException: Oracle Complex Event Processing:11.1.6.0/org.eclipse.persistence_2.2.0.v20110202-r8913, Oracle Event Processing:11.1.7.0/org.eclipse.persistence_2.2.0.v20110202-r8913
class com.bea.cie.lconfig.NonDeterministicFeatureException: Oracle Complex Event Processing:11.1.6.0/org.eclipse.persistence_2.2.0.v20110202-r8913, Oracle Event Processing:11.1.7.0/org.eclipse.persistence_2.2.0.v20110202-r8913
at com.bea.cie.lconfig.internal.RegistryConfiguration.getInputFeatureList(RegistryConfiguration.java:172)
at com.bea.cie.lconfig.internal.RegistryConfiguration.addFeatures(RegistryConfiguration.java:71)
at com.bea.cie.lconfig.internal.RegistryConfiguration.<init>(RegistryConfiguration.java:37)
at com.bea.cie.lconfig.internal.DefaultConfigurationFactory.createConfiguration(DefaultConfigurationFactory.java:17)
at com.bea.wlevs.Launcher.getBundleFromFeature(Launcher.java:749)
at com.bea.wlevs.Launcher.loadBundles(Launcher.java:840)
at com.bea.wlevs.Launcher.run(Launcher.java:266)
at com.bea.wlevs.Launcher.main(Launcher.java:133)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wlevs.Server.main(Server.java:238)
please help me resolve this issue.
Thanks in Advance.
Thanks in Advance.

Hi,
I used OCEP 10.3.0.0 and upgraded the wlevs30 domain to PS6(11.1.1.7.0). and it worked without such error.
My experience is:
1) in OCEP 10.3.0.0 it needs not to add the security groups in atnstore.txt
2) you need to add <scratch-directory/> for Jetty in server's config.xml otherwise you will see the visualizer takes a long time to get up on Windows
Thanks
Junger

I have updated my Macbook Pro from 10.7.5 to 10.9.1 and it keeps on restarting after upgrade. Please help me fix this issue.

Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
Nishanth

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Help! iMac Start up issue

Similar Messages

Maybe you are looking for