Help! iMac will not recognize my Photosmart 7350 printer!

I have an HP Photosmart 7350 printer. I know this printer is supposed to be compatible with Mac, and I installed the optional thing from the DVD for HP printer drivers, but this one I guess wasn't on it. It is not in the list of HP printers when I try to set up the printer and go to the Printer Browser. I went to HP's website in search of a driver. For Windows XP, the 6MB driver works on Parallels. But for Mac OS X, there are files in the upwards of 100MB, none ~6MB. I found a file for hp photosmart install which I was able to extract using StuffIt Expander, but at the step in the installation where I am supposed to click "Utilities", it just closes instead of opening the list of printers. In the add new printer "printer browser," my printer shows up in the list as "photosmart 7350", but in the "Print using" drop down menu, this hp is still not on the list.

I was looking here to post my problem with the 7350 and lo and behold, someone else has the same problem. I have gone through a significant amount more trouble shooting than the original poster with no positive results. The printer worked fine until I upgraded from OS 10.3 to 10.4. Since then I have been unable to print at all. I tried to install the driver via the disk. I tried to download the updated drivers from the website. I have spoken with HP tech support ad nauseum about the issue without any luck. I downloaded the latest GIMP-print version, the driver was not in there. I downloaded GhostPrint and Foomatic, the driver finally appeared in a list as an available selection, but the printer came up with GenericClass:waiting for device. I have used the HP util to install. I have installed via the Printer Browser (printer is connected via USB, direct, no hub). I have gone into the advanced feature of the Printer Setup Utility and add the printer this way with the same results. The printer works on the PC machine that sits on the adjacent desk. I am at wits end! I am this close from going "Office Space" on this machine and buying something else!
Any other thoughts would be greatly appreciated.
Brian

Similar Messages

  • New Windows 8.1 computer will not recognize HP Photosmart 6525 Printer.

    My father in law got a new computer that has Windows 8.0 and we upgraded it to 8.1.  I cannot get the computer to recognize the printer. I have downloaded the drivers and also tried to use the cd that came with the printer. While installing I get the message to connect the printer to the computer but its already connected by a usb cable. I have restarted the computer and also disconnected the cable and reconnected it multiple times.  I have also downloaded the HP Install Wizard and it still will not see the printer. I will try the HP scan doctor software later today.  The printer is HP Photosmart 6525. Is this printer compatible with Windows 8.1. Thanks!

    Thank you for the response. This printer is supported on Windows 8.1, as indicated here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108722-2&cc=us&dlc=en&lc=en...
    What loop is occurring when installing the software? If you can provide screenshots of the loop, or any error messages/code, that would be appreciated.
    In all honestly, newer printers would have a better chance of working. Personally, I could suggest the Envy 4500 and 5530. I have attempted to install these printers on 8.1, and I witnessed no issues. However, the Photosmart 6525 is compatible with Windows 8.1. More troubleshooting may have to be attempted, before the issue is resolved.
    Mario
    I worked on behalf of HP.

  • My iMac will not recognize my password

    I kept getting not allowed permissions to empty trash,etc. Now my iMac will not recognize old or new passwords.  How do I get passwords to work?

    Information.
    https://discussions.apple.com/message/21901121#21901121
    Another place to look for answers.
    Yahoo Mail Help

  • My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down"

    My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button. Anyone have any remedies?

    I ran into a similar (identical?) problem.  I inserted a DVD-R and my imac would not recognize it.  The only way to eject was to do a restart.  I tried some of the SMC reset stuff.  That didn't work.  I came across another thread on macrumors (http://forums.macrumors.com/showthread.php?t=336501)
    that solved my problem.
    I have an external Western Digital Passport drive that I use for timecapsule.  It turns out
    there are two files that WD adds to the /Library/LaunchDaemons that interferes with the
    SuperDrive.  I removed the WD files from the LaunchDaemons directory and everything works fine
    now.  Again, refer to the macrumors thread for more details.
    The files I removed from the LaunchDaemons directory were:
    com.wdc.WDDMservice.plist
    com.wdc.WDSmartWareServer.plist
    ..yes I had installed the WD backup software to see if I liked it....I did not, but didn't realize this files would cause a conflict with the SuperDrive.

  • When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

    When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

    If your on 10.6.8 like you should be for security/stability updates, somewhere along the line a later Bootcamp version was issued and only supports Win 7.
    You can read my post here for a alternative solution, running a virtual machine software
    https://discussions.apple.com/thread/3772839?tstart=0

  • All of sudden the airport utility on the iMac will not recognize wireless devices that have on network for ever

    Airport Utility will not recognize any of the devices on the network - mix of Time Capsule, Airport Extreme, and Airport Express.  The network works fine.  If you use the Airport Utility on iphone you can see and configure all the devices.  Any clues?

    AirPort Utility version 6.0 is rather limited in its abilities. I suggest you download and install the more useful version 5.6 (for Lion): AirPort Utility 5.6
    You can see both wired and wireless clients in Advanced > Logs and Statistics.
    AirPort Utility 6.0 cannot be deleted but it will coexist with AirPort Utility 5.6.
    Use 6.0 when you want pretty pictures. Use 5.6 when you actually want to do something.

  • IMac will not recognize scan function of all in one printer

    My 24" iMac will print on the HP Photosmart 3210xi All in One, but will not scan.
    Twice, (to ensure I didn't miss anything) I have run the manual un-install procedures prescribed from HP, and installed the appropriate driver for Mac with no success.
    When I try to scan, the scanner wants to begin, but the computer displays the message, "Sorry, scanner could not be initialized. (Scanner not found.)" We have the correct driver (Not the Print only option).
    This printer still works "full-up" on the clunker PC, so it's not a hardware issue with the printer.
    Any others with similar all-in-one issues? Solutions?

    I had the same problem with my HP Photosmart 2610xi All In One Printer. I went to the HP website and downloaded the full feature software/drivers and now it works great. Below is the software that you should download for your printer...hope it works for you!
    HP Photosmart Full Feature Software/Drivers - Mac OS X v10.3 and v10.4 (Universal)
    08-2007 9.5 170.57M

  • 27" I7 iMac will not recognize thumb drive

    I have a PNY 8gb Attache thumb drive that is not recognized by my 2010 27" I7 iMac.    It does not show on the desktop, disk utility, finder or system profile. However, this thumb drive works on my MacBook, 2006 24" iMac and a Dell laptop running XP.   I have 4 other drives (1-4gb) that work on all of our computers. Currently running Lion @ 10.7.3 but this problem existed on SL @ 10.6.8 also.   I have tried this drive as a FAT-32 and Mac OS journaled and the 27" still will not recogize the drive.    Any thoughts?    Thank you.
    Forgot to mention - called Applecare but they couldn't help.

    Try doing a SMC reset, that might help. Otherwise I'd try another thumb drive.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • IMac will not recognize scanner

    My iMac 10.6.4 will not scan. I have an HP Deskjet F4280; it will print fine, but when I try to scan using HP scan pro, or Adobe Acrobat, or Photoshop, it says "An error occurred while communicating with the HP imaging device." I've tried uninstalling and reinstalling the Adobe software, but nothing works. It started doing this with a previous HP printer--worked fine for several months, then just quit. Now it's doing the same with this new printer. But it prints fine.

    This is really weird I have been using the same HP printer/scanner C3100 but suddenly it won't recognize or scan;however, it will print and make copies
    Yes, I have updated all the drivers and nothing, I wouldn't try contacting HP they charge an outrageous hourly rate to answer a stupid question.
    Any suggestions

  • HT1338 I just purchased an iMac and an HP LaserJet M1217nfw printer.  The iMac will not recognize the disc that came with the printer.  What can I do?  This is my first Mac and just might be my last.  Installation has not been fun.  I would appreciate any

    I just purchase an iMac and an HP LaserJet M1217nfw printer.  I could not install with the installation disk that was furnished by HP.  This is my first Mac product and I'm just not sure what I'm doing...help!  I don't know if it's a mountain lion, a tiger, or a dog!  The box says OS X. I really need help.  Thanks for your time.

    What Mac operating system are you running on your iMac?
    Are you certain they're compatible?
    Have you checked with HP to see if there's a newer driver?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4 075472
    In addition, I haven't loaded on any software with my last 3 printers.  They just work without them, IMHO.
    But a current driver would be necessary.

  • My iMac will not recognize the factory speakers or any external hard ware until I restart the computer.

    Hey all,
    I have a relatively new iMac (Purchased Dec 2011) that runs on OS 10.7.3.  Currently we are having problems with the computer recognizing any plug-ins when we first turn the computer on (including all USB or Firewire hard ware and builtin speakers).  The computer just does not acknowledge that they are there until I restart the computer, at which point everything works great.
    I was wondering if anyone had suggestions on how to fix this issue... it's not major, but it is a pain to have to restart the computer each time you need to use an external hard drive or listen to music.
    Thanks in advanced, and just to let you know I just updated my software yesterday.

    As a test launch iPhoto with the Option key held down and create a new, test library.  Connect the devices and see if the same problem persists. Does it?
    OT

  • My iMac will not recognize my camera

    I have a Nikon and an iMac OS x 10.7.4 For what ever reason my computer quit recognizing my camera. It was working then it was not. I have restated it. I have charged the battery on the camera. I have relocated the USB cable to the back of the computer. I do not see the icon in my device section. Any Ideas out there?

    Most likely it is the CDs and DVDs Application System Preferences.  If you don't have the Finder opening it, it won't appear on the desktop.  This user tip explains how it might disappear in other methods, because any removable media won't be able to be ejected by the Finder unless it knows to show that kind of media in the correct location:
    https://discussions.apple.com/docs/DOC-1015
    You posted to the iMac PPC forum.  I'll have a moderator move the thread.

  • Have already had tech support regarding this issue but hasnt helped/itunes will not recognize ipod but computer will offer to open camera

    Need help please!!
    I cannot get my sons ipod to be recognized on itunes however the computer will acknowledge the camera to open for pictures.
    Have already spent hours w/ support and they cannot resolve problem.

    Hi hickorymom,
    Try this solution from an earlier post:
    Did you already try to disable the camera notification in Windows? http://support.apple.com/kb/TS1500
    Hope this works!
    Cheers,
    GB

  • IMac 400dv will not recognize new hard drive installed

    Hi,
    I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
    I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
    I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
    I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
    Any suggestions?
    thanks,
    Lucy

    Lucy Rust...
    In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
    Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
    You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
    I think the rest has been covered.
    ...Ron

  • I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

    I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

    i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

Maybe you are looking for

  • Computer shuts down without going to sleep

    hello, i've had an increasingly swollen battery with a corresponding diminished life. to a point that it barely fit, lasted ten minutes on its own and when it became depleted, the macbook pro would just shut down without a warning. so i bought a new

  • Purchase order yet not released

    Hi sap gurus, i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

  • My iphone text tone is not working when I plug in the earphone.

    Hi, My iphone text tone is not working when I plug in the earphone. My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfe

  • Faster response time of queries

    I have a query which joins a few tables with seveeral thousand rows each. This query normaly returns tens of thousands and the response time is almost 10 minutes and it's not acceptable for web application. To speed it up I just want Oracle to return

  • Resilience in oracle service bus

    HI to all, I'm getting a problem because i have have a process in oracle service bus, that have a split-join and when a OSB server is shutdown the split-join stop and when the server are started up it don't restart i can i have resilience to overcome