Help! Images not showing up in ALPC
I have this afternoon shot a series of calibration images with my Nikon D300s but I am having problems when I try to load them into ALPC to create a lens profile. I have added the images to the project (have also tried drag & dropping them - same result) and the program recognises the images as it lists all the files, however they are blank when I click on them, they simply show as plain white squares with nothing in them.
Obviously this makes it impossible to measure the squares and create a profile. I am using DNG files I have converted from NEFs using the Adobe DNG Converter, I have also converted the same files to JPEGs but still they are blank.
Does anybody have any ideas? Don't hesitate to tell me if I'm missing something obvious! This is quite important as I need to be up and running ASAP.
Many thanks, Brad.
Same problem. Blank white images. Macbook pro, 4 G ram, cs5, everything updated.
First series: shot 4 interations of 9 each with zeis 24-70f2.8 ssm on a sony alpha 850 in raw with strobes using a 13x21 chart.
Loaded into bridge to convert to dng with no compression and retain raw format but not imbed original files. Drug to aclr which opened to have just white pages. Waited about 10 min thinking it might be working. closed it. reopened then selected the files - white pages. Deleted files and reloaded from camera into bridge as dng's in linear format. didn't work. deleted the files and reloaded from camera as raw. Ran them thru the dng converter with standard settings. white pages. converted to jpg's from bridge export panel - white pages. loaded raws into acr, clicked auto, selected all, saved as dng's. started aclr and loaded those dng files - it worked. Completed that calibration that way.
Second series, different lens: Sony sal 70-400G. Shot raw, 9 each, loaded into bridge as dng. Loaded teh files in aclr which was a new project. But, just white pages in aclr. Tried the same trick to run thru acr first and save as dng, but.... white pages again - didn't work this time. Tried clearing the aclr cache each time. converted to jpgs in export panel. white pages. Deleted them all and reshot in jpg extra fine format. to bridge as jpgs. in aclr - white pages. Ran the disc utility to reset permissions and clean up the disc. Reset the monitor values. Rebooted the machine. Still white pages.
Have run out of tricks, and patience.
Similar Messages
-
BLOB image not shows in JSP page!!
Hi Dear all,
I had tried to configure how to show BLOB image to jsp page . The code are works fine and servlet works ok but image can not show only. can you help me that what need to be added. Please help me.
Can any experts help me? BLOB image not shows in JSP page. I am using ADF11g/DB 10gR2.
My as Code follows:
_1. Servlet Config_
<servlet>
<servlet-name>images</servlet-name>
<servlet-class>his.model.ClsImage</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>images</servlet-name>
<url-pattern>/render_images</url-pattern>
</servlet-mapping>
3. class code
package his.model;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.Map;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
public class ClsImage extends HttpServlet
//private static final Log LOG = LogFactory.getLog(ImageServlet.class);
private static final Log LOG = LogFactory.getLog(ClsImage.class);
public void init(ServletConfig config)
throws ServletException
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("GET---From servlet============= !!!");
String appModuleName = "his.model.ModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleName");
String appModuleConfig = "TempModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleConfig");
String voQuery ="select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = 'P1000000000006'" ;// 'P1000000000006' this.getServletConfig().getInitParameter("ImageViewObjectQuery");
String mimeType = "jpg";//this.getServletConfig().getInitParameter("gif");
//?IMAGE_NO='P1000000000006'
//TODO: throw exception if mandatory parameter not set
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName, appModuleConfig);
ViewObject vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
Map paramMap = request.getParameterMap();
Iterator paramValues = paramMap.values().iterator();
int i=0;
while (paramValues.hasNext())
// Only one value for a parameter is expected.
// TODO: If more then 1 parameter is supplied make sure the value is bound to the right bind
// variable in the query! Maybe use named variables instead.
String[] paramValue = (String[])paramValues.next();
vo.setWhereClauseParam(i, paramValue[0]);
i++;
System.out.println("before run============= !!!");
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
System.out.println("after run============= !!!");
Row product = vo.first();
//System.out.println("============"+(BlobDomain)product.getAttribute(0));
BlobDomain image = null;
// Check if a row has been found
if (product != null)
System.out.println("onside product============= !!!");
// We assume the Blob to be the first a field
image = (BlobDomain) product.getAttribute(0);
//System.out.println("onside run product============= !!!"+image.toString() +"======="+image );
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if ( product.getAttributeCount()> 1 )
mimeType = (String)product.getAttribute(1);
else
//LOG.warn("No row found to get image from !!!");
LOG.warn("No row found to get image from !!!");
return;
System.out.println("Set Image============= !!!");
// Set the content-type. Only images are taken into account
response.setContentType("image/"+ mimeType+ "; charset=windows-1252");
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[4096];
int nread;
while ((nread = is.read(buffer)) != -1)
os.write(buffer, 0, nread);
//System.out.println("Set Image============= loop!!!"+(is.read(buffer)));
os.close();
// Remove the temporary viewobject
vo.remove();
// Release the appModule
Configuration.releaseRootApplicationModule(am, false);
} 3 . Jsp Tag
<af:image source="/render_images" shortDesc="Item"/> Thanks.
zakir
====
Edited by: Zakir Hossain on Apr 23, 2009 11:19 AMHi here is solution,
later I will put a project for this solution, right now I am really busy with ADF implementation.
core changes is to solve my problem:
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
}All code as below:
Servlet Code*
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
String appModuleName =
"his.model.ModuleAssetMgt";
String appModuleConfig =
"TempModuleAssetMgt";
String imgno = request.getParameter("imgno");
if (imgno == null || imgno.equals(""))
return;
String voQuery =
"select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = '" + imgno + "'";
String mimeType = "gif";
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName,
appModuleConfig);
am.clearVOCaches("TempView2", true);
ViewObject vo = null;
String s;
vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
Row product = vo.first();
BlobDomain image = null;
// Check if a row has been found
if (product != null) {
// We assume the Blob to be the first a field
image = (BlobDomain)product.getAttribute(0);
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if (product.getAttributeCount() > 1) {
mimeType = (String)product.getAttribute(1);
} else {
LOG.warn("No row found to get image from !!!");
return;
// Set the content-type. Only images are taken into account
response.setContentType("image/" + mimeType);
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
is.close();
os.close();
// Release the appModule
Configuration.releaseRootApplicationModule(am, true);
}Jsp Tag
<h:graphicImage url="/render_images?imgno=#{bindings.ImageNo.inputValue}"
height="168" width="224"/> -
Crystal Report Images Not Showing - JSP inside /WEB-INF folder
Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folderHi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>../crystalreportviewers</param-value>
</context-param>
<context-param>
<param-name>crystal_image_use_relative</param-name>
<param-value>web</param-value>
</context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM -
Another Images not Showing up thread
I know there are multiple threads out there about images not showing up on the login page of application express, and I have browsed most of them without success.
My images folder is in:
C:\oracle\product\10.1.0\db_1\Apache\Apache\images\
My dads.conf file has specified:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
Address of missing image in I.E. is:
http://<host>:7777/i/htmldb/apex_logo.gif
When I ran @apexins I specified /i/ for the virtual images directory.
I am running Oracle Database 10gR2, with Oracle HTTP Server that came with the Oracle Database 10g Companion CD Release 2.
I am using APEX 3.2.
When I try to go to
http://<host>:7777/i/
I get:
You don't have permission to access /i/ on this server.
I also cannot login to APEX. When I type my username/password and click the Login button, it does nothing (nothing loads, nothing changes... nothing happens). I don't know if this is related?
Thank you,
~TomI found the problem -
In my dads.conf file I had:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
When I really needed:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images/"
Note the end slash after images changed from backslash to forward.
Silly me. -
Images not showing in the jlabel/jbutton
Hello all,
I've a package in which my cards directory is located along with all my src files and compiled classes. All my images ****.gif files are inside this directory.
Then I've following the icon object.
protected static JLabel lblDeck;The following code is used to get the image.
String imgPath;
imgPath = isImageExists("imgBG1.gif");
if (imgPath == "")
{ // If the image of Card Deck(imgDeck) is not Found
lblDeck = new JLabel();
lblDeck.setBackground(new Color(0, 64, 128));
lblDeck.setOpaque(true);
flagImgDeckFound = false;
} else {
// If the image of Card Deck is Found
imgDeck = new ImageIcon(imgPath);
lblDeck = new JLabel(imgDeck);
// Check if the image exists else return "";
protected String isImageExists(String imgName) {
java.net.URL imgURL = getClass().getResource("cards/" + imgName);
if (imgURL != null)
{ return (imgURL.toString()); }
else
JOptionPane.showMessageDialog(null, "File not Found: " + imgURL);
return "";
}I'm still unable to get the image in the jlabel!
When i checked the path, it is exactly returning the path of the file.
But its neither loading the image into the jlabel nor is it returning "".
This is just the label part i've other jbuttons also. Even they are not displaying any images.aLkeshP wrote:
can everyone see this thread?
YES FER-CHRISE-SAKE.
Just how many times do you intend posting the same identical question?
images not showing in the jlabel/jbutton
Problem in imageicon
iconImage on JButton & JLabel
Re: images not showing in the jlabel/jbutton -
I have come across something strange today that I've not seen before. I'm running LR 4.0 under Win7 64-bit. I usually use Photoshop CS6 beta as my external editor, but invoke CS5 when I have to use some tools that don't support the beta. Here is the scenario:
* I have CS5 open
* I externally edit an image in CS5 and Save it from CS5 when I'm done
* The edited image does not show up in LR
* I close LR and reopen it
* There is the edited image!
I have duplicated this many times this evening. I don't think I've seen it when I've used CS6 beta.Something strange is going on because I had the behavior reported of edited image not showing up after using another filter, Nik Silver Efex Pro 2.
-
HELP...images not showing up in internet explorer, but show up in Safari
Somebody please help. My images are showing up fine in Safari
but when I view them with internet explorer they show an x and
won't open. I am using layers and tables. Please help!
Here is my webpage if you need to see code.
http://www.puddlefoot.com/Tees.html
Thanks!Yonion.jpg is in CMYK colorspace, that's why it doesn't
display in most
browsers.
make it an optimized RGB jpeg file.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Help! Images not showing up in any browsers
I'm using Dreamweaver, and I can't get the images to show up
in any browser--Safari, Firefox, or IE. In Dreamweaver, it worked
in Safari, but now when I uploaded it, none. Please help, urgent!!
http://geocities.com/snwboardnchic99/
I know it's probably so simple but I can't figure it out!
Thank you!Quick guess..... you haven't uploaded the images.
btw You have javascript above you DOCTYPE - you need to
remove it.
Jo
"daveygrow" <[email protected]> wrote in
message
news:ef3obs$4rt$[email protected]..
> I'm using Dreamweaver, and I can't get the images to
show up in any
> browser--Safari, Firefox, or IE. In Dreamweaver, it
worked in Safari, but
> now
> when I uploaded it, none. Please help, urgent!!
>
>
http://geocities.com/snwboardnchic99/
>
> I know it's probably so simple but I can't figure it
out!
> Thank you!
> -
Images not showing up...Please Help!
I am fairly new to web design. I recently uploaded my dreamweaver site to a hosting site using FTP. I can see all my files through the fill manager, but on the actual site everything is messed up. None of the images are showing up and the layout is completely different from what I designed in dreamweaver.
Any help would be greatly appreciated!
If it helps this is the site:
http://www.tiremanagementinc.com/
Thank you!From what I can tell, none of your images are on the server.
If you're loading your site to server with DW, click on your images folder in the files panel and hit the PUT icon (up arrow).
Also, you have some images in the images folder, and some others in images/images folder.
For best results, try to organize your site in the files panel so that all your images are in a single folder.
C://yoursitename
about.html
contact.html
index.html
-Scripts
jquery.js
-Images
image1.jpg
image2.jpg
image3.jpg
-Styles
main.css
print.css
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Small images not showing in design view
Desperate for help! I've been trying to diagnose this for a
long time. For some strange reason, images that used to show up in
my design view are now displaying the 'missing image' icon. I've
narrowed it down to this--if the image is less than 8px high, the
image will not display. When I increase it to 8px or more high
(width does not have any bearing on it), the image is displayed.
Same exact image name, same placement, path, file type, etc. The
only variable changed is the image height. Someone please tell me
what is going on. By the way, this just started to happen. These
small images were displaying fine up until yesterday.You have two id="header" elements on the page....
I can see both the 5px tall GIF and JPG images just fine in
CS4.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"peregrinedesign" <[email protected]> wrote
in message
news:gmiaur$bv$[email protected]..
> OK, but I'm not sure this will help. Here's the page:
>
http://www.capitaloandp.com/orthotics.php
>
> What you will see is correct, and when I preview with a
browser it is fine
> also, it's only the DW design view that is not showing
the small jpeg.
> On the right side, there are two small black rectangles.
The one on the
> left
> is a gif, and the one on the right is the jpg. They were
both exported
> from the
> same original Fireworks file. I have tested using
Photoshop also.
>
> Thank you for your attention to this.
> -
Some images not showing on ipad when book is previewed
When I preview the book in progress, some images only appear in the thumbnails, not on the full page view. These same images were showing up a few versions ago. Other images are showing up just fine.
Hi KT and Anyone Else Who Could Help,
One thing I noticed is the images that are not showing up are all captioned, but with background shut off. I have a few image galleries as well, but those ARE showing up.
Some images are jpegs, others are pngs, but there is no pattern or correlation between image type and showing up, not showing up.
Besides, they all showed up previously.
So I removed the caption from one image and now it is showing up!
But I am nearly certain that in an earlier version WITH captions, they all showed, and I would like to keep the captions.
Any ideas?
Thanks so much!
Belinda -
Images not showing up in preview
I have a web site that I'm working on that has a simple
problem (I'm sure) but it is frustrating. The web site is in it's
own folder on the server named public_html. The thing is, the pages
look fine when I view them in Dreamweaver and when I upload them to
the server but when I try to preview view them locally some of the
images don't show up. Some of the image sources have a forward
slash (/) at the begining. These are the images that don't show up.
Please help! This is driving me nuts!
Thanks again.Post a link to a page that is not showing the desired images,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mattyman0" <[email protected]> wrote in
message
news:eia2mp$8ge$[email protected]..
>I have a web site that I'm working on that has a simple
problem (I'm sure)
>but
> it is frustrating. The web site is in it's own folder on
the server named
> public_html. The thing is, the pages look fine when I
view them in
> Dreamweaver
> and when I upload them to the server but when I try to
preview view them
> locally some of the images don't show up. Some of the
image sources have a
> forward slash (/) at the begining. These are the images
that don't show
> up.
>
> Please help! This is driving me nuts!
>
> Thanks again.
> -
Bridge CS6 Output to HTML Gallery - images not showing up
Bridge CS6 Output to HTML Gallery issue - my images are not showing up. The files look the same on the local and remote files. The images populate on the local and not on the remote. Is this a JavaScript problem.
Any help is appreciated.
I've done a work around solution by using Lightroom, creating a quick collection for a custom order HTML web gallery. I would much prefer to stay within Bridge CS6 and have its HTML gallery actually work...Hi AlbiDan,
Its possible that it might be a Javascript issue. I see that javascript is used in the HTML gallery. Did you upload through Bridge or from an FTP client? Do you have the URL for a broken gallery?
-Dave -
Background Images not showing up in template-based pages
For some reason, whenever I make a custom .dwt template, with
background images for things such as buttons, on my newly created
page, the background images do not show up. Anyone know why? Thanks
for the help in advance.Best you start here:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fmattsworld.mooretecproductions.co m%2F
55 code errors. Yikes!
Fix those and then see if the problem goes away. If not, post
back. At lease
with clean code we may be able to spot the problem.
Walt
"Irish_Cereal" <[email protected]> wrote in
message
news:fegl0v$jvc$[email protected]..
> Alright guys, I get it. Here's a link to the index:
>
http:///mattsworld.mooretecproductions.com
> Click on Videos on the navigation bar and you'll see
what I'm talking
> about.
> Notice how on the navbar on the index theres the custom
button? On videos
> it
> doesn't show up.
> -
.gif Images not showing up in IE8
I have 2 images in my menu bar header that are not showing up in my header for some reason. They show up in IE9, Firefox, Safari, and Chrome. But for some reason they aren't showing up properly in IE8. I'm not sure what the problem is. Every page on the website has this problem. Below is a link to one of the pages.
http://www.ibewlu220.org/_html/_Units/CPNPP/CPNPP.html
The code in the head section is:
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
The code in the header div is:
<div class="fltlft">
<a href="http://www.ibewlu220.org"><img src="../_images/_Logos/IBEW220logo.gif" alt="IBEW LU 220" name="IBEW LU 220" width="240" height="120" id="IBEWLU220" align="left"/></a>
</div>
<div class="fltrt">
<a href="http://www.ibew.org/" target="_blank"><img src="../_images/_Logos/ibew_logo.gif" alt="IBEW" name="IBEW" width="120" height="120" id="IBEWLU220" align="left"/></a>
</div>
Thanks for your help.When things go wrong, it's almost always a code related issue. Validate your code and fix reported errors. You have duplicate usages of the same ID. And you have name attributes with spaces in them. IDs and Names must contain single word tokens, no spaces allowed.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.ibewlu220.org%2F_html%2F_Unit s%2FCPNPP%2FCPNPP.html
Let us know when you get the code cleaned up and we'll take another look.
Nancy O.
Maybe you are looking for
-
DVD to hard drive? and then to... iPod?
I'm pretty new to a lot. I know it's possible I'm just not certain if I need to buy applications to convert the forat or anything But, I'm trying to get a movie from a DVD to my computers hard drive and then from the hard drive to my 5th gen iPod. An
-
Trim Mark problem. CS5 Any suggestions?
I am setting out A4 front and back covers as one piece of (A3+bleed) artwork to be reproduced by digital printing. After printing, the covers will be trimmed on four sides then wire bound. I set up artwork with covers side by side with 10mm in centre
-
Suggestions for fixing a problem?
My boyfriend is having an unusual problem with his iPod (30 GB w/ color display). Whenever he attempts to skip over several tracks, the iPod suddenly just resets itself. I tried to fix it by restoring it to factory settings and having him start fresh
-
so i just got a debit card and i want to get a couple of paid apps now. itunes only puts credit card as a payment method. my debit card has the visa logo. all i want to know is that if i put my debit card number in, will apple send me a monthly bill
-
SCOM 2012 - Getting List of Objects in Maintenance Mode
Hi, I want to create a group of all the objects that are in Maintenance / Unmonitored Mode at that particular moment. Whether it is possible to have it? Regards, Sajid