Help! Images replaced by thumbnails?

I recently exported my aperture library into iphoto and for some odd reason many, but not all, of the images now in iPhoto are thumbnails around 400kb - they should be 2MB + files! Seems somehow the originals were replaced by thumbnails. I exported back from iPhoto to Aperture again - same problem in my Aperture library. I do have an old vault file I created before the original move from Aperture to iPhoto. Suggestions? I'm considering restoring the vaulted library in Aperture and then exporting from iphoto any files taken after the vault was created and staying away from iPhoto for good. Any advice before I try this????
Also, why would my Aperture library be 20GB and the iPhoto 15GB - both have the same content.
Message was edited by: Tom Macdonald

that image links to:
IllustrationsFrame-03monument1bigtest.html
in the same directory as the image
Is that file there?
alex
bejim wrote:
> HI,
> I have a set of pages made with templates . There is a
problem however :
> certain images don't appear on the remote site and are
replaced by red crosses.
> I send an example : when clicking on the image , a wider
version should
> appear but instead there's a little red cross . It works
fine on my preview .
> Do you know how to solve this ? Thanks .
>
>
http://perso.wanadoo.fr/brunierbrunojulier/IllustrationsFrame-02monument1.html
>

Similar Messages

Upgrade to 2013 leaves "Images" library without Thumbnail Preview working

The issue I am seeing is occurring after an update from SharePoint 2010 to SharePoint 2013. The library is a publishing library created in 2010. These features are enabled in 2013. Looking at the "Thumbnail Preview" column in any view shows the
generic sheet of paper icon. Viewing the images in the "Thumbnail" view shows the thumbnails correctly. The images for the list in question are all .gif. As far as I know those are the only ones failing, but we could have missed some other filetypes.
I've tried moving a document to a newly created Images library and the preview shows as expected. So I believe I've pretty easily demonstrated that the actual image is not a problem and that SharePoint 2013 can render it. However, it's not a workable solution
to move these files.
If I open the library with Fiddler, I get a 404 error for 256_icgif.gif. From there it's been sort of a dead end as I wouldn't know where to test and see if that's part of the issue.
This is our dev environment before upgrading to 2013 so we're looking for a fix we can perform during or before the upgrade.
Thanks!

Hi Christopher,
Casting my mind back to the Beta, I hit something similar during a test upgrade and if I remember rightly it was to do with the content type mappings that came across. There are two content types Picture and Image which behave differently, so try swapping
the available content types in the library and changing that.
Paul
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Pop-up images appear as thumbnails

Today while accessing the help from my hard-drive, I noticed that when I clicked on a link to open a pop-up image it appeared as a thumbnail.
The pop-up is supposed to appear as a full-sized image, and not a thumbnail.
When generating the layout, in the multiscreen HTML5 properties, under screen profiles - desktop - optimization, I have Convert absolute image size to relative image size selected.
When this option is cleared, the pop-up image opens normally.
However, I would prefer to keep this option selected so that large images are converted to relative image size, and fit on the page.
What is weird to me, is that when accessing the latest version of the help online through my company's system both pop-up images open normally, and absolute images are converted to relative size so possibly some other setting is causing my pop-up images to become thumbnails?
Suggestions are welcome,
Yehoshua

Interesting. This is a consequence of the optimization setting. What method are you using for the popups? If you’re using autosize popups, try converting one or two to fixed size popups to see whether that helps.
Greet,
Willam

Opening an image from the thumbnail

When I open an image from a thumbnail I get a ! surrounded by a dotted line box. I can't find any help on what the problem is. It was fine last night

This is caused by the high resolution photo being disassociated form the iPhoto database. User activity within the iPhoto library can cause this as can random computer or disk error.
If you have not made any changes in the iPhoto library a rebuild may fix it -backup your iPhoto library and launch iPhoto while depressing the option (alt) and command (apple) keys and use the first three rebuild options
LN

RoboHelp 8 HTML WebHelp How to display a larger image of a thumbnail by clicking on or rolling over the thumbnail?

How would you display a larger image of a thumbnail by clicking or rolling over the thumbnail?

Hi there
For a mouseover you would have to add some custom developed JavaScript. You could probably find some pre-made on the web if you poked around.
Generally speaking, any way you slice it you will be using two images. One for the thumbnail and one for the full sized image. You could employ the popup functionalty to pop up the larger image.
I used to simply create DHTML drop-downs and insert the large images in the drop-down area.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Need Help in Replacement of Function Modules

Hello all,
I am working on Upgrade project from ECC 5.0 to ECC 6.0. I am facing problems for Replacement of two Obsolete Function Modules. Please give me a solution. FM's are as follows.
1) SET_AUTHORITY : This FM is obsolete in ECC 6.0 and there is not alternative FM present in help.sap.com or any other web portal.
2) WS_QUERY : Here as per my knowledge we use class CL_GUI_FRONTEND_SERVICES and methods FILE_EXIST or DIRECTORY_EXIST as per the parameters in old FM. For parameter 'FS' we use 'FILE_EXIST' and 'DS' we use 'DIRECTORY EXIST'.
But in our program prev. FM has parameter 'OS' i.e. Operating System.
But there is not method called 'OS EXIST' or similar. Please suggest suitable method.
Thanking you all in anticipation.
Best Regards,
Harish

Hi Harish,
                   I too could not find any replacement for SET_AUTHORITY
Obsolete Modules can be used in newer versions, but it is not supported by SAP in case of any technical issues.If you still need a replacement, you can replace it by the source code in the FM SET_AUTHORITY itself and modify according to your needs.
Below is the source code of FM SET_AUTHORITY, so you can modify it according to your requirement.
DATA: l_actvt TYPE tact-actvt,
        l_hier   TYPE STANDARD TABLE OF sethier WITH HEADER LINE.
CASE action.
    WHEN 'A    '.
      l_actvt = activity-add.
    WHEN 'C    '.
      l_actvt = activity-modify.
    WHEN 'D    '.
      l_actvt = activity-display.
    WHEN 'E    '.
      l_actvt = activity-delete.
    WHEN 'UD   '.
      l_actvt = activity-display.
ENDCASE.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            no_descriptions = 'X'
            no_rw_info       = 'X'
            setid            = set
            tabname          = table
            root_header_only = 'X'
       TABLES
            set_hierarchy    = l_hier
       EXCEPTIONS
            OTHERS           = 0.
READ TABLE l_hier INDEX 1.
IF sy-subrc <> 0.
    CLEAR l_hier.
    l_hier-shortname = set.
ENDIF.
CALL FUNCTION 'G_SET_AUTHORITY_CHECK'
       EXPORTING
            actvt = l_actvt
            authgr = l_hier-authgr
       EXCEPTIONS
            OTHERS = 1.
IF sy-subrc <> 0.
    CASE action.
      WHEN 'A    '.
        MESSAGE e827 WITH l_hier-shortname RAISING no_authority.
      WHEN 'C    '.
        MESSAGE e828 WITH l_hier-shortname RAISING no_authority.
      WHEN 'D    '.
        MESSAGE e829 WITH l_hier-shortname RAISING no_authority.
      WHEN 'E    '.
        MESSAGE e830 WITH l_hier-shortname RAISING no_authority.
      WHEN 'UD   '.
        MESSAGE e831 WITH l_hier-shortname RAISING no_authority.
    ENDCASE.
ENDIF.
If you need help in replacing in the above source code, please post your code here so that I can help you in modifying accordingly.
Regards,
Vasuki

Mapping Help for replacing source value

Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM    Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridhar

Hi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
   return "03";
else if(Addr_Type.equals("MAIL"))
   return "05";
else
   return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma

Image Resize into thumbnail

How to resize a big image (uploaded images) into a thumbnail
(size wise as well) on a run time...

I use
cfx_image quite a
lot. The IML commands are very powerful, but best of all its free.

Cycle images in a thumbnail gallery

Hi, I'm very new to HTML, so please bear with me. I'm
currently using a "Thumbnail Gallery" style page for my online
portfolio (when the cursor hovers over a thumbnail the image pops
up to the left of it) Here's a link:
Portfolio
What I'm wondering is, would it be possible to cycle through
several images, when the cursor hovers over a Thumbnail (instead of
just one image for each thumbnail)? I'm thinking of showing several
views of a single model in my 3D section.

You could try and combine the code with a slide show like
this one...
http://www.lisajaynedann.co.uk/
If you are not confident about trying to combine the code (I
wouldn't be!) then you could have the page as you have it now, but
require the users to click each thumbnail, instead of hovering to
select the next slide show. By clicking each thumbnail would link
to a new page, carrying the separate slide show.
You could also try and find a script that follows a link on
hover rather than having to click.

Displaying a larger image from a thumbnail [was: Question]

I would like to display a larger image from a thumbnail inserted on the web page. I inserted a rollover image, used the thumbnail as the original and a larger and different jpeg image as the rollover image. However, when the mouse rolled over the thumbnail, the new rollover image (different then the original) was the same size as the original. Is there an easier way to display a larger image from a thumbnail? What am I doing wrong? Thanks
[Subject line edited for clarity by moderator]

Could you also provide a CSS solution to opening a non _self page that is the same size as the image displayed on the page.
Not possible with pure CSS. Sorry. Your best option is to use one of the jQuery Lightbox scripts mentioned below.
http://line25.com/articles/rounding-up-the-top-10-jquery-lightbox-scripts
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Clips replace by thumbnails.

For some reason, when I brought up FCP, several clips in the timeline were replaced with their thumbnails. I have no idea why this was done since the original clips haven't been modified or moved. I can replace the thumbnails with the original content one-by-one, but there are a lot of clips involved. Is there some automated way to do this? Any idea how this could have happened?

well if you do a reconnect and the file names are correct, once you point to the correct folder and you have "matched name and reel only" and "reconnect all files in relative path" checked, everything in that folder should reconnect.

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Broken help images

I have had a recurring problem with RoboHelp for Word 6.
Whenever I have to work on a help project that I havent' looked at
in a while, I make my edits and then try to compile (to Web help).
I will get a silent compile failure - the status window says
'Starting compilation...' and the window title says 'WebHelp has
been generated'. No help files are generated. I have learned from
experience (and possibly from this forum) that what this means is
that a help image 'object' has become corrupt and ends up as a Word
image rather than a RH help image. I have to go through each module
(all 28 of them) and switch from Dynamic WYSIWYG to TrueCode. I
started to save the files in TrueCode mode, so that means I have to
convert to WYSIWYG and then convert again to TrueCode. Then I have
to search (visually) for any images that didn't get converted,
delete the image, and re-insert it the RH way. I have noticed that
It is usually one particular image btnChoices.bmp - just an image
of a small button with 3 periods (to simulate an ellipsis - we use
it to show a list of choices that can be entered into a field). So,
a 15 edit ends up taking a day or so trying to get it to compile.
Well it finally happened - I have a file that doesn't get
fixed when I do that. I have it down to:
1. delete the image
2. re-insert the image
3. convert to WYSIWYG
4. convert to TrueType
5. The conversion fails on the image I just added
I tried re-capturing the image and giving it a different name
- no luck.
Has any one else had this problem? Did Adobe correct it in
version 7?
Phil

Updating to RoboHelp 7 didn't help.
I ended up making a new project and importing all the .doc
files into it. I found one place that had a compiler tag that
didn't make sense. I removed the tag. Anyway I got it to work -
still don't know for sure what was wrong. A better message would
sure help - or a log file to see how far it got.
Phil

Multiple Image Uploader renaming thumbnails

I am having a blast with the ADDT! For a php noob such as myself this stuff is great, just what I have been looking for.
If only I knew how to stop ADDT's multiple image uploader FROM RENAMING THE UPLOADED THUMBNAILS.
Like this: myImage.jpg is renamed to myImage_135x150.jpg
I can deal with it stashing the thumbnail in a separate folder, but the name of the uploaded image and the thumbnail must remain the same!
I did manage to figure out where to change the thumbnails dimensions, but not the name itself...
Thanks for such a great tool,
Jason

Hi Jason,
ADDT´s default thumbnail renaming rule is defined in the file "includes/tng/triggers/tNG_DynamicThumbnail.class.php" -- at the end there´s a function named "Execute", and in here you´ll find the following:
a) $thumbnailName = path_info['filename'].'_'.$width.'x'.$height.'_w_'.$hash.(isset($path_info['extension'])? '.'.$path_info['extension']:'');
this needs to be changed to:
$thumbnailName = path_info['filename'].$hash.(isset($path_info['extension'])?'.'.$path_info['extension']:' ');
b) tNG_deleteThumbnails($thumbnailFolder, $path_info['filename'].'_'.$width.'x'.$height, $hash);
this need to be changed to:
tNG_deleteThumbnails($thumbnailFolder, $path_info['filename'], $hash);
As always, please backup the original file before making such changes ;-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Image Replacement - LoRes to HiRes!

Is there a way to automate the image replacement of low resolution images to high resolution images in inDesign. We currently have an application that prints to file a PostScript file containing over 800 low resolution images. We currently have to replace these images (800 images spread over 14 different images, so each design is used up to 50 or 60 times) one by one in Adobe Illustrator CS2. I haven't had any luck automating this task in Illustrator CC and was directed to inDesign. I would like to select the 50 or 60 low res images and replace them once, instead of 50 or 60 times. I would do this over the 14 different designs, making the process faster.
In the past we would take this low res postscript file and send it to our Creo/Scitex PS2 or Brisque, and the rip would take over and do the auto picture replacement function for us. Is this process possible in inDesign?

Well, not every nuance of your process is clear to me. If the starting point is a "postscript file," which you're currently opening in Illustrator, then InDesign can't step in and do that same thing. It simply doesn't interpret postscript the way Illustrator can. Its native format is proprietary.
If the "root" document was an InDesign file, it would take a bit of setup, but it could be done this way:
Low-resolution images stored together in a common folder (folder 1); linked to InDesign document.
Hi resolution images with exact same names stored together in a different common folder (folder 2).
Rename folder 1.
Open InDesign document; all links missing.
Relink first missing image link to high-resolution counterpart in folder 2.
InDesign finds and relinks all high-resolution counterparts in folder 2.

Help! Images replaced by thumbnails?

Similar Messages

Maybe you are looking for