Help! images won't render to video

I am a student in animation and media design. I have previously used photoshop in CS4 to animate and I have just upgraded to creative cloud. I have tried to animate using photoshop 6 and I can't get my drawings to render to video. Another student thought that it was rendering and just too fast for me to see it. But I tried all the different settings and every one that I did is rendering the same way. I get a play screen to pop up and it shows the musical note in the screen and it looks like it plays but there are no images. Can you please help me?

When using images, you need to determine the correct fps {frames per sec} If you only have 3 images (default is approx. 30 fps) That would mean your animation would be done in 1/10th of a second. For it to last a full second the fps would have to be set to 3fps. In the timeline panel there is an icon in the upper right hand corner, it should have a menu item for setting the fps.
If it isn't there, lets us know and someone can figure out why.

Similar Messages

Please help - image won't appear in iTunes

Hi
I hope you can help as we seem to have followed all the rules but the image for our podcast still hasn't appeared after more than two weeks.
RSSFeed:
http://www.podooch.com/corporate/dirtydancing.php5?action=subscribe&chid=220&corpid=179
Format: jpg
Size: 300px x 300px
Resolution: 72 DPI
We have also changed the file name so that iTunes will recognise it as new (as suggested in another post).
Any help would be greatly appreciated!
Thanks in advance.
Windows XP

Hi ..
Follow the instructions here > iOS: Device not recognized in iTunes for Mac OS X
The iPhone should be recognized in iTunes no matter which user account you are logged into.

Media Encoder CC 2014.1 won't render Neat Video plugin

Apply plugin in AE CC 2014.1 and sent to the Media Encoder CC 2014.1
it opens and nothing happens !!!!
return back to the AE CC 2014
remove the plugin Neat Video
and send it back to Media Encoder CC 2014
everything works fine !!!!
What's the problem?

Hello Qnolic,
As Bob suggested, please check with Neat Video support to ascertain as to whether the plug-in is approved to work with Premiere Pro CC 2014.1 and AME 8.1, or not. This update was not a dot release, it was a major release where things like plug-ins, GPU drivers etc. need to be updated to be fully functioning. Keeping plug-ins updated is the work of the plug-ins manufacturer. If the plug-in needs to be updated for the update and no update is available, it is better to stay on the former version. That is why I marked Bob's response as correct, as well.
Thanks,
Kevin

Timeline won't render in Premiere Elements 12 (and music video editing advice)

I have a section of video I'm editing that won't render. I've read some similar threads but still have a question about how I can edit the clips to 'force' a render.
I'm running PE 12 on a Core i3 laptop running Windows 8, so not a huge amount of processing power. I don't have an orange line above the timeline over these clips and I understand PE has decided that it's already giving me the best possible preview quality and doesn't need to render this section. However, it's four quick edits in time to some music and when I preview it back my computer clearly can't process the video and audio fast enough because I get very jerky video so I can't verify that the cuts are perfectly aligned to the drum beats.
I've been exporting the whole four minutes just to review about five seconds of video in the middle to make sure it's synched, and this is getting really frustrating as I'm having to make frame by frame adjustments to improve the sync.
Is there anything I can do to each clip, like adjust an image setting, to force PE to give me an orange line and want to render this section?
Just as an aside to anyone who edits music video type clips - if you're making, say, four quick cuts to four drum beats in a bar, do you find the audio/visual sync works best if the cut is on the frame the drum beat attack starts on, or does it seem more natural if it's one or two frames after the initial attack so it's 'mid drum beat'? I'm tending to find just after the initial attack looks/sounds better for me - but maybe that's something to do with the delay in my PC processing the frame!
Thanks for any advice,
Chris.

Chris
Please excuse the questions, but I did not want to take anything for granted...are you sure that you are looking above the Timeline content for the render indicator line? Assuming that you are OK with that.....
Are the gray tabs of the Work Area Bar placed so that they span the entire content of the Timeline, including this five second content which you say cannot be rendered. Remember rendering does not fix problems, rather it is a preview that helps you to realize that a problem exists sooner than later. Consequently, please confirm if an orange line persists over that five second content even if you press the Render key above the Timeline.
Have you expanded the Timeline content to the maximum with the Zoom Out Zoom In Slider above the Timeline get the best look at the content on the Timeline in contrast to get the best possible preview in the Edit area monitor?
Have you gone to Edit Menu/Project Settings/General and set the Audio Display Format to Milliseconds if you are involved in audio edits?
Have you been nudging audio in sync with video using shortcuts, such as...
As you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once (one tap = 1 frame nudge)
As you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once (one tap = 5 frames nudge)
I would suggest that exploration and experimentation are the best tools with which to work to achieve a specific effect for your specific
situation.
Please review and then let us know if any of the above targets your questions about your workflow.
Thank you.
ATR

Video Won't Render

Hi all,
My video suddenly stopped rendering. I have no idea why.
I have tried:
restarting the computer
copying the project as a new project and deleting the previous one
Moving the video to a new sequence
Creating an entirely new project and creating a small sequence (also won't render so it's not just the project)
Any suggestions other than reinstalling the software, which I am not sure will help but is the only thing I can think of...
THANKS FOR ANY HELP!
Shari

My video suddenly stopped rendering. I have no idea why.
What, exactly, needs to be rendered?
By that I mean, is there compositing and/or transitions that need it? Or is it only filters?
If it's only filters, you might have an issue with your User Preferences. That is...
1. Press Option-Q (User Preferences)
2. Click on the Render Control tab (2nd from the right)
3. Make sure - in the 'Render & Playback' box - that the checkbox for 'Filters' is checked. Then click OK
(In case it isn't checked, you'll need to correct this in all of your sequences as well - press Command-0 [Zero] with the sequence active and alter it's Render Control settings)
Also, unrelated specifically to filters, please confirm that your settings under the 3 Render settings found in the Sequence menu in your menubar - Render, Render All, Render Only - have the (correct) settings applied. (ie. that at least something is check-marked. Otherwise, when those actions are activated, nothing will happen)
(all this in addition to the solid advice given by TV Show Guy :))

Help! I can no longer choose Adobe Media Encoder when trying to Render a Video.

When I try to Render a Video, only the JPG option is available, but I need to render a Quicktime.
Most likely related is a new error I receive when launching Photoshop CS6 Extended: "Could not complete your request because of a program error." This dialog box has an OK button. Once i click this, it opens no problem. Had been ignoring this until today when I couldn't render my video.
I have not changed anything with Photoshop so not sure why this is happening now, when it didn't use to before.
Please help!

Sorry, of course you would need that. I'm running Windows 7 Professional and have Adobe Photoshop CS6 Extended for 64-bit. PS version number is 13.0.1 x64.
What else would be needed?

Images won't open in my gmail or websites can anybody help me? this happend when i updated to the newest version of Firefox

Question
Images won't open in my gmail or websites can anybody help me? This happen when I updated to the newest version of Firefox

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.
* [[Troubleshooting extensions and themes]]

My iPhone 4s won't upload hd videos to you tube from iMovie I'm running the latest update of the app and the latest software, help

Help the iMovie on my iPhone 4S which the latest version and I'm running the latest software won't upload HD videos to YouTube it just keeps failing in failing and failing again but it will post lower quality videos but I really want to post HD movies so someone please help me also please tell me if this is been happening to you

THere has been a few people on these forums complaining of the same issue now and then.
The easier fix is to export to the camera roll, and send to You Tube from the photos app.
Hope that helps.

AE won't render the entire video

All day i've been trying to render a video that's about 4 minutes long but it will only let me render the first 2 minutes. At first i thought it was just something wrong with one of the frames which has happened before. When that's the case i usually just skip that frame, but this time none of the frames on the second half of the video would render. It's a pretty intese edit with about 100 layers with many effects, but i have a relatively strong pc.
Nvidia gtx 680
16 gb RAM
And i've never had this much problems before. Aand it's EXTREMELY slow. Even if i go to custom preview and only render every 16th pixel it still takes like 10 sec to render 1 frame. What's wrong? I've read that you should increase your cache and something like that. I've trie doing it but i don't understand what it means. I have about 10gb of free storage if that matters.
Here's a few screeenshots of things that might be imoprtant.
I render with H.264
And i use Windows 8
And when i try to render the 2nd part the "Elapsed" just goes to 1 and then stops. I don't get an error message .It just stops. If i don't do anything it just stands like that for hours, and sometimes when i try to stop the render AE freezes and i have to restart the pc
Please help! This is getting really frustrating

Adam Smith Cornelius Jams wrote:
i have a relatively strong pc.
16 gb RAM
That's not much RAM for AE, by the way.
Are you using the ray-traced renderer or the standard renderer?
What's the exact version number of your AE (down to the last decimal)?
Do other projects behave normally?
Don't render H.264 out of AE. AE is terrible at that. Render to an intermediate codec and then use the Adobe Media Encoder (or Premiere) to make your final deliverable.

Compressor won't render past 30 seconds of video?

I am trying to use compressor to render a sequence from FCP to a WMV and it won't render past 30 seconds? Anyone seen this before?
File Extension: wmv
Estimated file size: unknown
Output file type: Windows Media
Video Encoder
Format: Video
Pixel aspect ratio: Square
Crop: None
Padding: None
Padding: None
Frame Controls: Off

You need to buy the Flip4Mac FCP component to convert to WMV. You have the trail version of flip4Mac and it only converts 30 seconds.
http://www.flip4mac.com/download.htm

Video images won't load, error message says "problem loading page/server not found

when i select videos to watch, they have symbol in the top left hand corner but blank everywhere else. if i right click on the symbol i get an error message "problem loading page/server not found" but i'm already logged in to the website. this just started happening today after having watched 100's of videos for years on the same sites. i haven't changed any settings that i know of, but i have tried several different troubleshooting tips but nothing helps. i have windows xp. and i use firefox exclusively. what can i do?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report your results.

Lightroom won't render any images.

I am using Lightroom 4.1.
I have recently upgraded my graphics card and now Lightroom won't render any images!
There does not appear to be a problem with either Bridge or Photoshop CS5.
Can anyone offer any advice?
Thanks,
Paul

More information, please.
When you say "render", exactly what do you mean? That images previews don't appear in say, the Develop module? Or that Lr isn't exporting images?
If it's the latter, what happens when you try to export?

DVD burned from a disk image won't work on different computers???

Under the directions for how to burn a DVD from an disk image, the Apple Help document (http://docs.info.apple.com/article.html?artnum=93006) says this:
"Note: When burning a disc from a disk image, the burned disc will have the same format as the disk image. If you need a disc that will work on different computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from the disk image won't be able to be played on a PC? a Mac other than mine? Neither? WHAT? I am planning to sell the DVDs of a workshop I present -- to people who may be playing them on PCs. Should I not be using this method (burning from a disk image) to burn my DVDs?
PowerBook G4 Mac OS X (10.4.9)

Under the directions for how to burn a DVD from an
disk image, the Apple Help document
(http://docs.info.apple.com/article.html?artnum=93006)
says this:
"Note: When burning a disc from a disk image, the
burned disc will have the same format as the disk
image. If you need a disc that will work on different
computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from
the disk image won't be able to be played on a PC? a
Mac other than mine? Neither? WHAT? I am planning to
sell the DVDs of a workshop I present -- to people
who may be playing them on PCs. Should I not be using
this method (burning from a disk image) to burn my
DVDs?
Video DVDs are in the UDF format. The disk image you created is in the UDF format. When you use Disk Utility to burn the disk image to writable media, the new discs will be in UDF format and all will be well.
You are doing things correctly.
BTW, unless you have an external burner with lots of cooling, if you expect to use the burner in your Mac (which DOESN'T have lots of cooling), it's a good idea to pause between discs to allow the burner to cool down. (BTW, this comment is based on the reported results of several people in the forum. If you don't allow the cool down timer, you will start to create 'bad' discs. Also it is VERY important that you reduce the burn speed in Disk Utility to 4x or lower in order to create discs with maximum compatability with players. (You should see a way to change the speed in Disk Utility afterr you have inserted a disc.)
F Shippey

I have windows 8.1 and firefox won't play youtube videos but IE will

I have windows 8.1 and firefox won't play youtube videos but IE will. I have tried reinstalling firefox, flash, java. Resetting firefox don't help, disabled hardware acceleration, protected mode 0 in the mms.cfg file. Nothing will play on youtube in firefox. It says "an error has occured, please try again later". The ads play fine though. Everything plays fine in IE. I have tried different versions of flash also with no luck. I even restored the system to a previous iso image with no luck. Does anyone have a solution?

It maybe because your javascript is disabled .
You can check the javascript.enabled pref on the about:config page.
http://kb.mozillazine.org/about:config
There are also extensions that can block JavaScript or otherwise interfere.
https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Or,
"Clear the Cache":
Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
'''''Do NOT click the Reset button on the Safe Mode start window.'''''
https://support.mozilla.org/kb/Safe+Mode
https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
please report us if any problem.

IPhoto won't import .mov video from iPhone

I just got my wife a new Mac mini. It is running the latest versions of Mountain Lion and iPhoto.
She's recorded some short videos of the kids with her iPhone (4s), and wants to organize these in iPhoto alongside pictures of the kids (she's done this before).
However, since getting her new computer, when she tried to import the videos, she got an error message that said the files were an unrecognized format.
We were able to retrieve the videos and copy them to her hard drive using Image Capture; however, she would still like to import them to iPhoto.
Any help is appreciated.
Thanks.
-tri

There are many, many posts of this nature in these forums. See, for example:
iphoto won’t import mov video
For many, rebuilding the XPC helper cache solves the problem off the bat. In terminal try this, and reboot:
sudo /usr/libexec/xpchelper --rebuild-cache
The above posted by Andy Ball on a thread related to a similar problem with Aperture:
Re: Import video to Aperture library on Mountain Lion
Other things to try:
1. create a fresh iPhoto library and try that. (hold down opt while launching iPhoto)
2. create a new OS X user (in system preferences) and try there.
In my case – and many cases – neither of those things work either, which means the problem is system wide. Again suggesting that the xpc helper solution might work. But for me it did not either.
There are other suggestions that there are conflicts with Perian (on Yosemite) and flip4mac. In my case uninstalling both of those didn't solve it either.
So maybe one of those solutions will work for you, results apparently vary. But this is a huge unresolved issue many others are having as well. I have a case with a senior apple advisor open, still unresolved. His suggestion of course, at this point, is an archive and re-install. I'm not ready to go there yet.
BTW, another thing he had me try was to import the file with Image Capture (which works). Then open it in QuickTime Player X. Then try exporting to 480p. Does QuickTime crash? It does for me.
My summary:
1. Files successfully import with Image Player.
2. Files play with QuickTime Player X.
3. QuickTime Player X crashes when exporting to 480p.
4. Files import with iMove.
5. Files fail to import with iPhoto (unrecognized format as with OP)
6. iPhoto import failure/errors are system wide and not specific to a library or a user.
7. rebuilding xpchelper cache and rebooting in my case does not resolve issue.
8. same videos import fine in iPhoto on a totally different system (laptop running same versions of OS X 10.10 and iPhoto 9.5.1)

Help! images won't render to video

Similar Messages

Maybe you are looking for