Help! Imovie install erased newer version
I am on Snow Leopard and find it infuriating to work in the imovie version that comes with it. I installed an older version of imovie hd 5. That was a disaster and now the regular imovie is no longer working. How do I install the imovie that came with Snow Leopard? Thanks!
imagesbyrob wrote:
.. Does my install disk from 10.4 have a downloadable version of Ilife ..
the re-install disks of your Mac offer all apps.
MacOs disks do not contain any apps..
(a bit confusing...)
you can manually choose to install the iApps only...
Similar Messages
-
has anyone ever had their apple ipod disappear from the computer? Mine did when I tried to install a newer version on my pC (vista), yesterday. Now I can't even see any apple icons on the screen or any other reference to my ipod tunes. I have had them on the computer for more than 6-years, and have spent a sizeable sum with apple buying iTunes. Help!
One more note. All my music on my iPhone was erased when I clicked on "Transfer Music from iPhone". I mistook the "from" for "to". I want the music to go from the PC to the iPhone, not the other way around. I've sync'ed many times since the latest version of iTunes, so I know that doesn't work.
-
Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan VeranoIs there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/ -
I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!
It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
How to locate the serial number and identify your model
And to get the version of Mac OS that's installed:
From the Apple Menu at the left end of your menu bar, select "About this Mac..."
In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade. -
I installed the newer version of Imovie 10.0.1 and it took control from my camera so that I can not record my image on the older version imovie 8.0.6 which I enjoy using. How can I retrive the camera from the newer system?
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
Or you can revert to 3.6.16. <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
I have tried to just install the new version of itunes from the apple website, it looks like it downloads but after 5 minutes at the end of the install it says 'old version of itunes cannot be uninstalled, please contact support.'?
Is there anyway I can remove the version of itunes from my computer? i dont mind if i lose the music/content I already have on my itunes. I need to do this as i have just received the iphone 4 and need to install the newest version of itunes.
Many thanksI need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help
You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default. -
Formating LapTop Then Installing New Version of iTunes
I formated my laptop windows 7 64-bit, which had the old version of iTunes.
Then I install the new version of iTunes but now I can seem to find or see my
apps or music, on iTunes anymore. help please. Thanks!You erased them.
Did you back them up before you erased them?
Then did you restore that backup to your newly erased computer? -
Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
RamonMoving this discussion to the Adobe Reader forum.
-
I found information on how to transfer my itunes library to a new computer. I am going to use an external hard drive for this to transfer my itunes folder to the new computer.
I will then download and install a new version of itunes on my new computer.
My question is this. When I do this, will itunes have all my album artwork for all my library? My library has a lot of my own music and I have spent quite a bit of time copying album artwork that itunes did not add. I am really hoping I don't have to do this again!
Thanks for your help!If you follow the directions in this Link...
Copy iTunes to an External Drive
http://support.apple.com/kb/HT1751
Everything should be carried across... -
This is the best method to install a new version of Studio!
Do it cleanly. By this I mean create a new fresh startup disk for the install of Studio. Whether for Studio 1 ,2 or 3, trust me. this method will get you to a really stable FCS system.
1. Backup everything you want to keep if you're using the same drive you've been using as your startup disk. Clone it if you'd like to save time digging around for the files you want to keep. Or buy a new drive for your tower and use it as a startup disk, keeping the earlier one until you've transferred all you need from it. (I have no less than 3 startup disks for my single tower here) One is a 250 gig drive, the other two reside on their own partitions of a second physical drive. I use one system for beta testing, reinstalling the OS each beta test, and one "working" system for daily real work environments, and yet another "backup" system which is there just in case I need it. (but never really do actually).
2. Load your latest OS disk, and restart your computer from it holding down the c key during a boot up, or selecting it from the startup disk control panel in the apple system prefs.
3. Once your computer starts up from the OS disk, select "optional installs" from the button you'll see in the window. From there select "erase and install" and install will begin.
4. After the OS install, run Software update and go all the way with it. There's nada out there that's not OK to install.
5. Install Studio. If it's an upgrade version, no problem to not install the earlier version you're upgrading from. Just have it's serial number handy because FCS will ask for it as well as the upgrade serial number.
6. Run Software upgrade again to make sure all of your FCS apps are up to date. INSTALL EVERYTHING that Software Update proposes to install.
7. You'll be a very happy camper.. it will also feel like your whole computer is faster because of this clean install of the OS you did...
It's not impossible to get a fine upgrade done without doing it as I've described above, but with the latest round of problems being posted about a new install, I gotta say that this clean method will fix all the problems being posted here and elsewhere. Why even bother taking the risk? What I've posted above will be THE WAY to make sure you're system is running right.
I've espoused this method of install any time you upgrade your OS (i.e., Tiger to Leopard or the upcoming Leopard to Snow Leopard upgrades about ready to hit us all) OR any time you install a new version of FCS or even a FIRST install of the studio. It's not all that time consuming, and running pro level software really demands that the system install is totally clean.
I oversee about 75 FCS stations at the Colorado Film School, we do this clean install every semester (4 months) on the systems there, and really have incredibly stable setups. Never really having the problems that get reported all over the forums... not only that, they boot fast, run fast, and just work.
When software companies test new versions of their software in beta, it's always asked by all software manufacturers to install their beta over a clean fresh OS... always... so there's a lesson here to learn from them, and also a hint: nobody chooses the "upgrade" button for a new version of said software, rather they are testing over CLEAN installs only. Makes perfect sense then to install new versions of software as complicated as this is over a clean new OS install.
JerryI fully support Jerry's advice. Though it is a little like the old auto repair manual I once had. If you looked in the section under "clutch replacement", it started out like this ...
*Clutch Replacement procedure.*
• elevate car - be sure to use jack stands to support vehicle
• remove engine
• with clutch pressure plate exposed ....
Of course, they never spelled out all that was involved in the "remove engine" step. So, in the interest of adding more detail to Jerry's advice on the "erase and install" process for those who have not done it before and might be intimidated - read on.
• Make a list of all Applications to install. Which ones do you need? Go through your Applications and Utilities folder and note which ones you'll want to reinstall. Note the version.
(I don't know about you, but I had a shocking number of apps I downloaded, used for a few times and never used again. Forget installing these disused apps.)
• If you are upgrading from a PPC to an intel machine, you'll want to know if the apps are UB or PPC. Upgrading your PPC software to UB can be a significant cost in a PPC to intel conversion. Know what you are getting into - do a search before installation to see if there is a UB version available. You can find out whether an app is PPC or UB by looking in System Profiler>Software>Applications. This window will also tell you the current installed version number. Generate a .pdf file of it and have everything listed for your records.
• In the list, note whether is was a download or you have a disk. If it was a download, find the DMG or installer package and copy it to an external firewire drive. Put it in a folder titled - Apps to be installed - or something easily identifiable.
• If you need to go back to a previous version (e.g. QT 6.5.2) download the dmg file BEFORE you start the installation process.
• In the list, note if the application is a full install or an UPGRADE. If an upgrade, make sure you have the previous version's disks (as well as the serial numbers - see below).
If the UPGRADE version does not require the previous version to be present - eg when installing the upgrade version of FCP 7, DO NOT install earlier software. All you'll need is the previous serial number. The way to figure this out is to try to install the newest version. If it needs the previous version present before proceeding, the install process will tell you that.
Some upgrades will require that a version of the previous app is on the disk. If this is the case, when you install the first version, simply install the minimum so the app will be on the hard drive. You will need to do this because there will be NOTHING on the disk after you do your clean erase.
• Referencing your list, find ALL your disks before you start. This includes previous versions if you are unsure whether they will be needed.
• Spend some time looking through this forum for Professional Application installation issues. The classic example is a conflict between Logic and FCP. Install FCP first and you'll have no issues.
• Sort your list into an installation sequence. Lay out your disks in that order.
• Referencing the list, make sure you have ALL your serial numbers including those you've downloaded. I've purchased a number of programs on line and the only documentation of the serial number was an email. All those are kept in a dedicated folder in Mac Mail. For serial numbers that arrived via electronic means, use cut and paste instead of re-typing whenever possible. This will prevent errors in transcription.
In making the list, TEXT EDIT works ok, (I use Excel). Text edit has the benefit of being easily readable on any mac. Print the list out for reference, put a copy on a flash drive or a firewire drive where you can access it to cut and past serial numbers during the installation process.
• Recognize this is going to take some time. Ranting, drinking too much coffee, swearing, sitting in front of the computer watching the progress bar, etc will not make things go faster. All it will to is put you in a really bad frame of mind. Do it over a weekend when you can be multitasking. While you are cleaning off the mountains of paper on your desk or raking the yard, you can take regular breaks to check on progress.
Process -
• Download Carbon Copy Cloner or one of the other backup utilities and do a full backup of your existing system drive to an external firewire drive. Make the drive bootable. *Do not* cheap out on this as this is your insurance policy. If you forget something or can not find a serial number, you often can find it and copy it from the backup system to the newly installed version. Or, if things go horribly wrong, you can simply copy the old system back to your computer and pick up where you left off.
If you have a MacPro or G5 tower, an alternative to cloning your existing system disk is to pick up a new hard drive to use as the clean new system disk. Your existing system disk will be the clone.
• Once you have gathered and organized all the materials and backed up the drive or installed the new system drive ...
• Insert your OSX installation disk and boot the computer from the disk (Jerry explains how)
• Erase the hard drive. Use the ZEROs option as this will map out any bad sectors. This will take time. See the note above.
• Install the OS. If it is an upgrade install, see the note above regarding upgrade installs. Repair Permissions and then run the updates. Repair Permissions.
• Install your applications following your list. Make sure to Repair Permissions after each install and update..
Have fun, be prepared for a few minor glitches. If you multitask, you can get the garage/ or office cleaned out and your computer rebuilt. In all honesty, this process took all weekend plus time in the next week as I discovered apps that needed additional updates, configuration settings, etc. No doubt it would have been faster if I was sitting at the console the whole time, but I was able to get the office cleaned up and organized (which also makes ME much faster). Overall it was a very slick process.
When you have a fully functioning system again (you have tested all applications and everything works), CLONE the new system and put your info, your notes and the disks in a safe place - once you've done this once, why go through the pain of organizing this stuff again ...
Now, rejoice in a much faster machine with a lot more free disk space.
Cheers,
x -
I installed a new version of iTunes and now...
I installed a new version of iTunes and now it doesn't recognize my phone. The phone software is up to date and working normally, but I would like to sync my phone and can't. Every time I plug my phone into the computer, which worked fine before the new iTunes software, my phone asks me "Do you trust this computer?" I have restarted my computer, and that didn't help. Also my computer will not recognize my phone, to download pics, after I've activated iTunes.
Thanks for the help!found a solution for anyone else looking for it.
http://support.apple.com/kb/TS1538
everything is working now...*phew* -
Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.
Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
Cannot uninstall or install any newer versions of itunes
My laptop recently had to have the registry recovered. I'm sure this problem is related to the registry, but I don't know what key is preventing this from happening. Whenever I try to install any newer versions of itunes I get an error about the apple updater software cannot be uninstalled because the associated .msi can't be found. I even point to the .msi and it still fails. I have even tried to completely remove itunes and I get the same error. First of all, I don't understand why apple has designed the install files to remove previous versions when merely upgrading them would fix any problems like this. So, if anyone knows how to fix this, please help! I am now several versions behind and am getting errors adding music to my shopping cart because of it.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Help!! Updated new version of iTunes but I can't open it
Help!! Updated new version of iTunes but I can't open it nw. It pop up a window said: [the file "iTunes Library.it" cannot be read because it was created by a newer version of iTunes. ] what is it?Tried to remove and install old version iTunes also can't work..
Manually download from here and install http://support.apple.com/downloads/#
Maybe you are looking for
-
Need Advice On Using A New Firewire Enclosure
Just bought an external Firewire enclosure. I'll install either a Maxtor 250G HD or the original/shipped Quantum 20G in the enclosure. I'd appreciate advice on when and when not to turn on or unplug the enclosure, OS installation, etc, etc. Will it s
-
NW-MDM-EA ( Enrichment Adapter Certification)
Hi all, My organization is going to appear for the SAP certification in NW-MDM-EA. Please check the below link for the prerequisties for appearing the certification. SAP NetWeaver Master Data Management - Enrichment Adapter (NW-MDM-EA) In this link t
-
Photoshop Elements 13 do'nt work in edtit mode
I have installed Photoshop Elements 13 under WIN7 the Organizer function works fine. If I open the edit Funktion I get the following Error Massage: Problemereignisname: APPCRASH Anwendungsname: PhotoshopElementsEditor.exe Anwendungsversion: 13.0.
-
Intra Company STO pricing Procedure assignment
Hi In intracompany STO we need to raise invoice from the supplying plant to receiving plant.So i created STO pricing Procedure with Cost price plus Profit margin and transportation cost .Now where to assign this pricing procedure?Whether to assign th
-
Configuring rman settings with enterprise manager
I am learning about RMAN and I want to use EM. (absolutely new to Oracle -) is there a way to access EM through http://?