HELP! Imported audio files now randomly out of sync!

I cut a short film a while ago. It was shot on HDV. I used some in-camera audio (from the HDV tapes) but also, some audio files from my sound mixer, which I originally imported as WAV files and manually sunc them up. Everything was fine.
Later, I outgrew the original media drive and upgraded, copying all of my media to the new drive. When I did that, I noticed that all of the camera audio was fine, but all of the audio that had been imported from those WAV files was randomly out of sync -- meaning that some files were 1 sec early, some 16 frames late, etc.
When I broke the link and re-linked to the original drive, all was fine again. Now, however, doing that makes those original files out of sync also.
When I relink these files now, FCP ALWAYS finds a discrepency with them: They supposedly have a different "Media Start and End" and "Rate." Apparently, that's why they're being offset, but they're the EXACT same files that I started with, so what's up?!??
Any ideas would be greatly appreciated. They represent A LOT of work to fix one by one.

This is what it says under FORMAT: 24-bit Integer (Little Endian), Mono, 48.000 kHz
Incidentally, this is EXACTLY the same for both the files on the original drive (that play perfectly in sync) and the copied ones that are out of sync.
I realize that FCP likes AIFFs, but WAVs is what my sound guy gave me.
Any other ideas?
Message was edited by: Lloyd Dexter

Similar Messages

Help Importing Audio Files

How does one set the settings for importing audio so that when you import a file, it automatically imports it to the very next sample of the last import (i.e. so that the is no space, empty samples, between the two files).
I know you can do this by dragging, but I have a bunch of files in one project and it is fairly tedious to drag each one individually.
Any ideas?

How does one set the settings for importing audio so
that when you import a file, it automatically imports
it to the very next sample of the last import (i.e.
so that the is no space, empty samples, between the
two files).
I know you can do this by dragging, but I have a
bunch of files in one project and it is fairly
tedious to drag each one individually.
Any ideas?
Your question is a little confusing. Importing audio simply brings it into the audio window of a song / project. You can also drag and drop directly into the arrange window. When you do this, you will be asked to place the files on one track or individual tracks. Usually you will choose individual tracks, but it sounds as though you would want to choose one track.
If what you are doing is dragging the files in one at a time, the way to get them to be lined up with no time between them is to use the key command "tie regions by position change" after you have dragged them in. Select them all, use the key command you have assigned and they will snap into place.
HL

In Premiere Pro 2014 imported audio skips and is out of sync - version 7.2.2 was ok

I have been importing AVCHD Content in to Premiere Pro 7.2.2 with no issues. Now that I have upgraded to Premiere Pro 2014, importing that same AVCHD footage causes the audio to skip and finish before the video causing it to be out of sync. I compared preferences between the 2 versions and all settings seem to be the same. This is something clearly different between these two versions of Premiere Pro. Anyone else have this issue?

Here is some additional info:
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
Revision ID: 0x0000
ROM Revision: 113-C0170F-175
EFI Driver Version: 01.00.560
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort

Automator Action "Import Audio Files" error message

I use this automator action daily when it is activated via an alarm time in iCal. It is the 3rd workflow run in a series of 7 worlflows to create audio files while I'm at work (I record XM programming for use later on my iPod). Since I upgraded to OSX Lion yesterday, I'm getting a new error message I've never seen and I can't find any info on it. Can anyone help? The error message in a popup dialogue box is:
The action “Import Audio Files” encountered an error.
Check the actionʼs properties and try running the workflow again.
Under the Log for the workflow I get this message:
The operation couldn't be completed. (OSStatus error -1712.) (-1712)
The imported audio file does actually get inputted into iTunes and converted properly via iTunes, but the error creates two problems. One is the source file isn't deleted after the action runs (which is a checkbox option in that particular action). This isn't a big deal, because I can create another workflow seperately to delete the file, so I'm not as concerned with that. The major problem is that the error dialoge box displays and the sebsequent workflows that are scheduled to run right after this one can't run becasue Automator is occupied with the error message.
I'm looking for any advice I can find, I've been using this series of workflows for a long time without issue, but seems like everytime there is a new OS I have to go through the geriatrics of figuring out what slight changes apple made to the Automator actions.
Thanks for reading,
Chris

Hi,
I just solved the problem pretty easily: earlier, on Snow Leopard, automator had to be set to work in 32bit instead of 64bit otherwise there has been a lot of error messages.
I tried to do the same with iTunes on Lion and, oh miracle, it works:
close iTunes then go to Applications -> right click on iTunes -> read informations -> check the box to run the app in 32bits and restart iTunes and .... that's it.
I work in a local radio in Belgium and I rely on automator on an everyday basis to download then add prerecorded broadcasts to iTunes to be aired with Lion server and I was stuck since a few weeks because of that problem. Now I can finally work again :-)
English is not my native language so please forgive me for my mistakes ... :-)
Apple RULES (but you already know that )

Imported audio files are repeating same audio on objects in a slide

Hi
I can't find anything here that mentions the problem I am having.
I am using Captivate 4. And Neospeechs desktop VoiceText program to record audio files outside of Captivate. They are saved as WAV files, then I import the audio into Captivate.
I have various objects on a slide. For example, I have six text Rollover Captions. When you roll over them, some text is displayed. I have attached my audio files to these rollover objects. So, I would have audio1.wav, audio2.wav, audio3.wav etc and these play when you roll over the captions.
The issue I am having, is that when I Publish or Preview the project, sometimes the wrong audio file is playing upon rollover. Usually the first couple of caption/file combinations will work, so I get audio1.wav for caption1 and audio2.wav for caption2, but then say for captions 3,4,5,6 I am still getting audio1.wav playing!
I have doubled checked everything and the correct audio files are attached to the captions. And they all play correctly in Edit view.
I've just noticed this has happened again in a different Captivate 4 project, where I have about 6 lines of Text Animation, with an audio file for each text animation. They have been distributed across the timeline so that the text animations do not overlap, and yet I am still hearing imported audio files repeated.
If anyone can help to shed any light on this, i'd be grateful, as I'm totally stumped!
thanks
Lolly

Have you got the correct selection buttons at the bottom left of the Files panel enabled under Sort by:?

The audio file is not recognized by Logic. Can't import audio files?

Hi,
The audio files are on my desktop. Logic 9.1.1 will not recognize them and gives me this message when I try to drag and drop OR Import Audio File OR use Audio Bin.
As far as I know, I am using wave files (extension .wav). So what could be the problem. Here's a picture of how the files look on my desktop.
The regular silver and blue iTunes icons look like this when I Get Info:
The black iTunes icons look like this when I Get Info:
Importantly, the black iTunes (only 2 out of the 18 audio files) are the ones that actually import. Does it have something to do with the fact that it shows under "More Info > Audio Channels 1" vs. the silver and blue iTunes .wav files (which do NOT have this)?
Furthermore, here is the process I used to get the audio files in the first place. On my PC, I exported audio files from my Ableton Live project onto a thumbdrive. I copied the audio files from my thumbdrive to my Mac. Maybe this had something to do with it.
Also, as you can see, under Sharing and Permissions > there is only "read and write" for all names, so it's not a permissions thing.
Thanks.

Thanks for your reply.
+Can you play them as Preview (select in Finder, hit spacebar)?+ No. The black iTunes icons play with no sound and the silver and blue iTunes icons do not even come up in Preview at all.
+Will iTunes play them?+ Only the black iTunes files (2 out of the 18). When I click on a silver and blue icon'd file, it will not even open in iTunes.
why on the desktop? it was just a temporary thing. I was not able to pull them into my Audio Bin. I tried what you suggested. I put the files in the Audio Files folder of my project. When I go to open them from within Logic by Import Audio File, they are visible but greyed out. I don't use the desktop except for testing stuff like you do.
+How was the thumb drive formatted? FAT32 or other DOS-format, or Mac OS Extended (HFS)?
+the extension is not where apps look to recognize an audio file format, it is the header data. Some audio programs can read RAW audio files, but more about that after your reply to this one.+ It is formatted MS-DOS (FAT 32).
(*I wrote all this stuff above while I was working and waiting for the PC to write to my thumbdrive again*******finally I got everything to show up.
I loaded the files again from the thumbdrive. This time they were all in the black iTunes format, and I put them directly in the Audio Files folder like you suggested. After some doing everything works fine. Weird.
Thanks!

Captivate 2 Vista unable to import audio files

Hi
I have had an audio problem with Captivate 2 and Vista -
There is a hot fix to enable recording which works.I did that
... . but I am unable to import audio files.. even those that came
with Captivate 2 in the gallery give me the same error message..
unable to decode & import wav/mp3 file.
Does anyone have a solution!! Need to do a demo next week!!
thanks
phil

Hi Phil
I don't suppose using Captivate on Windows XP is an option
for you? This would seem to be a Vista related issue. Captivate 2
may work to an extent on Vista, but it would appear this may be one
of the "gotchas" one may encounter when using it in this
environment.
The good news is that Captivate 3 was announced today and
will work on Vista. I know this doesn't help you immediately, but
will provide an answer before too long.
Cheers... Rick

IPod audio files now listed as "other files"

my iPod was connected to my work pc when iTunes froze. I was not able to eject the iPod so I manually disconnected it. Since then, the audio files now show on the iPod as "other" files--thus, it doesn't play music--and the iPod will not synch with either my work pc or either of my Macbooks. I have 30K+ songs on the iPod so I'm hoping the problem is correctable. Thanks everyone,
Ed

Your iPod's library has been corrupted. The music is probably all still there, but the iPod has no database through which to access it. Check out this post from Zevoneer for some iPod media recovery options.
http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
Many of the tools will rely on a valid library, but the manual method refered to towards the end of the post should work regardless.
tt2

In 10.4, an internet audio file now opens with Quicktime?

Many thanks in advance for your attention.
When I was using 10.3 (and before), when clicking on an audio file on the internet, RealPlayer 9 automatically opened.
One could see the % of the file being downloaded and then (quickly), one would automatically hear the audio clip.
Most often, I am talking about audio clips available on NPR (National Public Radio).
Since I have installed 10.4 (now at 10.4.3), when I click on the same audio file, now Quicktime opens instead. And then nothing happens. Quicktime opens, a Quicktime Player is seen, but I hear nothing and nothing tells me whether the audio file is being downloaded, is ready to be listened to, or anything.
With Quicktime 7, is RealPlayer now supposedly superfluous?
- Ross

Many thanks QuickTimeKirk,
But think I need more step-by-step directions.
1. I have RealPlayer (9) already.
2. MIME settings in QuickTime Preference Pane. Set it to use RealPlayer for the Format .SMIL How?
3. In the QuickTime Preference Pane, there is a box for .SMIL, one box only, under "Miscellaneous." It IS unchecked already. But NPR still opens with QuickTime.
4. By "Change your Mac to use Real Player to open .SMIL files - ." I assume you mean, I will be on NPR, download a QT file and then try to change it to a RealPlayer file under "Get Info?"
- Ross

Importing Audio Files From CD

New to Logic Express 9
I tried this for the first time last night and had some trouble. A bass track imported...looked like a bass instrument but sounded like an overhead drum mic??? I just clicked "Import Audio Files" and went directly to the CD. These were wav files so I'm thinking it is a coversion issues. Checked the file with Itunes and it's definitely a bass track. What's the best way to accomplish this import?
Thanks

It's becoming obvious that the program has become corrupted in some way. I have a session that I closed in good shape only to find the next time I opened it that all the sends were activated and even after turning all the sends off I'm still getting bleed from two or three tracks in a single track.
In this current session I tried muting the problem bass track and dragging it again from the audio bin into another track. This time it's got sax on it although visually the wav looks the same as the original bass track.
I guess I'll have to call Apple Care...jeeze!
Message was edited by: Rusty K

Unable to Import Audio Files

Hi
I'm having trouble importing Audio files into my arrangment. I get this error message ;
All allocation blocks on the volume are full
Result code = -34
File = (then the name of the file)
Anybody got any ideas ?

The external HD that I record to was running low but
I 've set the recording path to other drives that have space but the error still comes up.

It is very difficult to import audio files from extern drives (NAS) into the new garageband

it is very difficult to import audio files from extern drives (NAS) into the new garageband.

Are you trying to open an audio file in GarageBand or a GarageBand project?
To open an audio file drag it from your NAS to a real-instrument track in GarageBand.
If you are trying to open a GarageBand project - can you open the same project, if you copy it to your system drive?
Trying Google translate -
Bent u probeert om een audiobestand in GarageBand of een GarageBand-project te openen?
Om een audiobestand slepen uit uw NAS naar een real-instrument track in GarageBand openen.
Als u probeert een GarageBand-project te openen - kunt u hetzelfde project opent, als u het kopiëren naar uw systeem schijf?

How do you reduce the beat of an imported audio file?

How do you reduce the beat of an imported audio file?

albertofromdesio wrote:
How do you reduce the beat of an imported audio file
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimporttempo
(Let the page FULLY load. The link to your answer is at the top of your screen)

XMPSES file extension and Out of Sync issues

I captured a VHS tape to an AVI. If I watch this file using Windows Media player, the audio and video are in sync. I then imported the AVI into PE11 and created a video project. I selected the MPEG option for Computer under Publish+Share. I did not change any settings. The preset is NTSC DVD Standard. When the project was complete, I now have two files
FILENAME.MPG
FILENAME.MPG.XMPSES
Also, when I play the .MPG file using Windows Media player, the audio and video are out of sync. The audio is delayed by a couple seconds.
I am using Windows 8.1
Does anyone know why PE11 creates the two files? Is this related to the sync issues?
thanks,

uberjaeger
That .xmpses is an informational file attributed to Adobe and described as a Premiere Elements DVD Marker File (has information about DVD marker project, chapters, titles and scenes). I can confirm its existance. I do not suspect that as the source of your out of sync audio in your Publish+Share/Computer/MPEG with NTSC DVD Standard export.
How did you capture the VHS tape to AVI and what type of AVI did put on the Premiere Elements 11 Timeline....DV AVI? If DV AVI, was it type 1 or type 2?
What were the properties of this import into Premiere Elements 11 - 720 x 480 4:3 @ 29.97 interlaced frames per second or something else? What did you use for Add Media?
What was the project preset of this Premiere Elements 11 project? Did you set the project preset to NTSC DV Standard manually before the Add Media or did you let the program automatically set the project preset based on the first video drag to the project's Timeline? If the program took charge, what did it set? Please see Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio (even if grayed out).
If you take your Timeline directly to Publish+Share/Disc/DVD disc, does the DVD-VIDEO standard on DVD disc play back with out of sync audio?
By the way, do you have the VLC Player and does your mpg play back with audio out of sync there?
Let us start here and then decide what next.
Thank you.
ATR

Audio and Video are Out of Sync

Hello,
This seems to be a reoccurring problem for me and I'd love some help getting it resolved once and for all. After capturing footage, the audio and video are out of sync in the clip AND when I drag it to the timeline. When I go through each part, it looks like the video hesitates often, which seems to be causing the misalignment of audio. But, once it is moved into alignment, it goes out of sync again throughout the remainder of the one hour video.
I'm capturing through a Canon Optura 50 Mini DV and editing with FCP 6.0.1. I have checked that the audio mode is set to 16 bit on the camera, and the capture settings have the audio rate for 48 KHz.
This same problem occurred when I was capturing another event last week.
PLEASE advise. It won't get aligned even if I take the hours and hours to move the audio left and right frame by frame.

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

HELP! Imported audio files now randomly out of sync!

Similar Messages

Maybe you are looking for