Help!! Importing audio from FCP

Hi, I have final cut studio 5 and the problem i have is sending from FCP to STP.
In the last project i put together i had recorded a lecture and the audio was fine when the lecturer was speaking, but when people asked questions the audio was very poor. As it was a lecture there was no need to edit it so i captured the whole 70min video file in 1 go. I then split the clip up using the blade tool so as that the questions people were asking were in seperate clips to the lecturer talking.
I then right clicked on a question clip and chose send to STP, it went in but it was the whole audio file from the lecture not just the 20 seconds that i wanted, is there any way i can do this?
Cheers for your help with this
Chris

Hi Chris,
Had the same problem. This happens because it is a reference clip in STP, always looking to the original media file. Doesn't matter if you cut it in parts in FCpro: it always shows the entire clip in STP. If the original mediafile is long it slows down everything in STP particularly with drawing the waveform
Solution: finilize your editing in FCpro so you are sure content and lenght are ok; than use the mediamanager to COPY the whole project using 'DELETE UNUSED MEDIA', add handle length etc.
If you send audio files from this new FCpro project to STP you can work with you 20 seconds audioclip
Hope this helps
Bart

Similar Messages

Importing audio from FCP

Is there a way to import audio projects from FCP into logic keeping the automation that the video editor has made?
Is there a file format other than OMF that contains the automation. and can FCP export it and can logic read it?
Is there a 3rd party application that can convert?
Or do I have to go back to the bad old days of Pro Tools (or worse, Soundtrack "pro")? PT LE is limited for soundtrack production, isn't it?
Is there anyone doing serious audio post production on logic, and if so, how are the projects imported?

The problem with exporting to AIFF, is that you can't crossfade between your cuts, or normalize regions. Your just stuck with the FCP raw mix. This is OK if your cut is relatively simple and you've already crossfaded and blah, but if you've got all kinds of dynamics going on, and different types of recording, you're definitely going to want more control over the export.
The problem with OMF, is that it doesn't translate well into LP. This seems to be a regular thing coming up on threads, apparently it works better with other audio editors but not LP. I've found that despite specifying handles on my export, non appear thus making crossfading impossible, you just get the same glitches your trying to eliminate.
HOWEVER the great thing is that apple invented their own format XML, an apple interchangeable file format. If you import this to LP, you get REGIONS like in FCP that reference the original files on your HD, which means you can now CROSS FADE, and NORMALIZE.
That makes me happy. I like it.

Adobe Presenter 9 and PowerPoint 2013 - Missing Import Audio from PowerPoint button

I am only able to intermitantly use the Import button in Adobe Presenter 9 to Import Audio from PowerPoint. Why would I be able to do it on some presentations but not all? I thought it was an audio conversion issue but even when I convert the audio (when prompted by PowerPoint) it doesn't always allow me to import it.

I have found a solution if the original PowerPoint was a ppt file, follow these steps:
File > Save As a pptx file
Close PowerPoint (this helps with not corrupting the file)
Re-open the pptx file
File > Convert
Save with a new file name (this helps with not corrupting the file)
You should now have the Import from Presentation button if you go to the Presenter tab and click the Import button
I have not found a solution for pptx files yet.

App to import audio from vinyl or cassette to Mac

I would like to import audio from my vinyl and cassette collection to my iMac.
Does anyone have any recommendations for a reasonably priced App which will do this successfully?
Any help would be appreciated.

Just tried this again. I may be missing something with the options in the dialog box which states the following defaults:
Format: ZIP
Method: Normal
Exclude Mac Resource forks (selected) - don't understand what that means?
Delete files after compression - not selected.
At the foot of the dialog box it states "Drag files to RarGenie in the dock"! Not sure what that means either.
Please don't spend any more time on this if you don't have an easy answer. I was really hoping to hear from someone who had used an available App in the App Store which they had found easy to use and not too expensive and which could be used with an appropriate hardware device.

Trying to Import Audio from CD without Adminstrator rights

Hello,
I currently have 20+ computers running Audition and need to change my network to Active Directory signon. When I change a machine to AD and login as a USER I cannot import audio from a CD. I get a pop up screen saying You must be signed on as an administrator to import audio from as CD (and so on). I know this is a windows error because none of my CD ripping programs work EXCEPT Windows Media Player. I was wondering if ANYONE knows where I can change things so I can have users import from cd's? I know you can "run as" but now you are giving away the admin passwords and I know I can make a user with admin rights and have them sign in under that, but you are still giving anyone who thinks about it rights to sign in as that user with admin rights.
Any help would be GREATLY APPRECIATED!!!
Dave G.
Boston, MA

Apparently it's a deliberate policy decision on the part of Microsoft, and possibly one forced onto them by the RIAA. If you can get hold of a suitable policy editor for XP, then you can alter it. The instructions for fixing it with gpedit apparently go like this (although I've never tried it, I must admit)
Run gpedit.msc (via Start menu, Run..)
Select the following: Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options
Enable the option 'Devices: Restrict CD-Rom access to locally logged-on user only.'
That's all I know. If all else fails, download something like Windows XP Security Console, and try doing it with that.

Missing Audio from FCP to Soundtrack Pro in Final Cut Studio 2

I've been trying to edit a sequence from Final Cut Pro 6 in Soundtrack 2 by sending the sequence to soundtrack as a multitrack project. For some reason, when I send it, multiple audio files from the original sequence are completely missing, and I have no clue why. They're .mov files from the original import of footage.
Anyone know why these don't transfer and how to fix it?

Hi
I too have had trouble with Audio from FCP 6 messing up in STP 2. My opinion is that the process works if the audio tracks in FCP are either Mono sourced or stereo sourced and are never relinked, split to mono (in the case of stereo files) in FCP during editing. God forbid you unpair a stereo track and delete one channel!
Once in STP I have had occasions where non audio appears, the wrong track appears... or sometimes the wrong audio!
Once in a while double clicking on the offending clip in STP to open it in a Wave window seems to show the right audio. Either saving it of closing the window ( command/w) restores the right material to the clip in STP.
You could right click on the audio in FCP and "send to STP Audio Project". Hopefully the correct audio is opened in STP. Then save it. Now re-export the Multitrack project and see if the audio makes the trip.
Or, you could export the Audio directly from FCP, then import it into STP and position it against the video manually.
One warning : once things start going pear shaped in the FCP-STP workflow, it's my experience that I'm fighting problems all the way. It's why I don't use STP for FCP mixing .... I want to, but its too risky.
I hope V3 is better.
Best
Lee

Importing audio from CD-where does it go?

I tried importing audio from a cd tonight for the first time, from within the audio window. Where does the file go? After I quit the song and tried to open again, the file could not be found. I tried importing again. When I put the CD in iTunes opened up and somehow renamed the CD "John Ford Radio"!? Anyway, I figured out that once the file was in the audio window I used the "move" function to copy the file to the song folder.
Is there an easier way to do this?

If you import audio from a CD, it stays on the CD. You probably saw a message something like "Insufficient privileges" which means that the OS recognised that it couldn't write the calculated wave overview back to the CD.
The best method is to copy it to your hard disk and check the Ownerships and Permissions within the Finder info. You need to have Read/Write on any audio file.
Finally, when saving your work, always use Save as Project since that will create a single folder with all your files nicely tucked away.
Pete

Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button

In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?

Hello,
In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
Thanks,
Shubhi

Import audio from movie problem

Every time I import audio from a movie in Logic X, there is a glitch at the beginning of the audio. I just switched from 9 and never had this problem before. Anyone else experiencing this? I think it's a bug that needs to be fixed.

Its quite possible this problem is being caused by one of several audio file related issues in the current OS X 10.9.2 that apparently are fixed in 10.9.3
You can find out for yourself by installing the Public beta seed of 10.9.3 found here....
OS X Beta Seed Program
(Remember to make a full backup of your existing system drive before installing the beta OS X)

Import audio from sony mini disc player

Does anyone know how to import audio from a sony mini disc player? I have all of the ilife software as well as final cut. Any suggestions would be appreciated. Thanks so much.

Maybe Audio Hijack?
http://www.rogueamoeba.com/audiohijack/
Sue

Captivate 6 randomly dropping imported audio from slides during publish.

I think I remember this occurring in 5.5 as well, but only very occasionally. In this (my first) cp6 project, it's occurred 3 times already.
What occurs is that upon viewing the output (.exe), one slide will just not play the audio imported to it, although the slides before that one and the slides after it play their imported files.
I have re-published the project 6 times, and in two of those new publishes, it has dropped audio in a different slide, and played the audio on the slide where it previously did not play audio.
The imported files play just fine in all slides during preview in every case, so it seems to be occuring at publish. These are straight Audio > Import to > Slide wav files.
Anyone else see this?
At this point I just have to keep re-publishing until I get one that plays all files and call it a day.

Hi, Varun.
I finally got around to updating to 6.0.1.240 this morning.
The audio issue seems to still be there....it still drops imported audio from certain sildes, randomly. It changes with every publish.
THEORY: I noticed that on one of the slides where audio didn't play, the audio file contained a small silent region before the narration began. Maybe .3 or .5 seconds. I removed that silent portion so that the narration starts almost immediately (i.e. less than .2 second seconds of silence.) and for that slide, the audio did play at publish. So perhaps something in the playback exe is ignoring any audio that starts "too late" into the slide.... ?
I am now going back to check the audio files in every slide to remove any preceding silent passaages, and see if that cures this. Will update with my findings.
Another issue I noticed is that my background loop randomly stops playing. (This may have been in the previous build, too, not sure.) Not sure if this is in any way related.
If I pause and un-pause, the background music returns (starts at beginning of loop), and then stops again.. I verfied that "Loop Audio" is turned on.
Thanks.

How do I import audio from a website to Garage Band?

Brand new to Garage Band (on the Mac, not iPad). I am trying to import audio from a website with an .mp3 extension to Garage Band. I'd like to extract just a piece of the audio, so I assume GB was the best way to do it.
How do I import the audio to GB? If GB is not the best way to do it, any other suggestions? I need the piece of audio for a presentation I'm giving.
Thanks.

Do you have the audio as an mp3 file already? Then just drag it into GB's timeline. If you have to capture it first, there's several browser plugins that do it or general programs like Audio Hijack or WireTap.

Problems outputing audio from FCP into a mini dv

hi there
i'm trying to output a video with 2 diferrent audio channels into a minin dv through a camera. everything is fine during output but when i check the tape the audio skips and sometimes sounds a little bit squeaking. i exported everything as .mov and imported back into FCP. so im outputting everything already rendered.
does any one have an idea why this is happening?
thank you.

Could definitely be a problem with the camera, but... the most obvious thing is that your output from fcp doesn't match the format on the camera. Make sure that both are set to 48k 16 bit and that your camera is recording SP.

HELP NO Chapters from FCP and Compressor-Did the FCP markers correctly too.

Hi Everyone,
Having allot of good Beans with FCP.
One problem though:
1. Export to DVDSP4 with CHAPTER markers on my timeline and when I try to import my m2v file from Compressor its greyed out for some reason so, I drag it into DVDSP4 from finder and highlight my play button on the 1st template
MENU: SET ASSET AND CREATE CHAPTER INDEX.
It usually works great while it continues on but, I dont see my chapters anywhere.
I know they are there but, someone on online here said that you dont see the chapters while in compressor (which I wish showed them in the preview windo to confirm they are there) but, have yet to see them who up in DVDSP4.
I still think this is a FCP inquiry but, trying to forums.
HELP<

http://discussions.apple.com/thread.jspa?messageID=2010186&#2010186
Has some info on Chapter Markers to help.
Are you exporting the markers when you export from FCP? Are you adding them and making sure that they are on the timeline (not the track) in FCP? (If you open the movie in QT you should see the markers on the lower left in a crop down selector if they exported properly.)

Import audio from movie?

Hey
I'm using Logic9 and usually use it for straight composing, lately I've tried putting movies in and wanting to play over the top.
I can get the movie on no problem it's when I try to import audio that nothing works. It uploads it but there's nothing there?
Can you help??
Thanks
Dave

Hey, just to clarify... are you trying to extract the audio, so that you can listen the audio feed from the movie on a separate channel?
When you import the movie, it should provide options for you to 'Extract audio'. If this is selected, it should import to a new audio track. Check near the bottom of the Arrange window, as it's notorious for importing to a track outside of your current view.
Hope that helps,
Matt

Help!! Importing audio from FCP

Similar Messages

Maybe you are looking for