Help importing bounced rewire tracks

so i have figured out that you have to bounce the rewire tracks to record them. but when i go to import the bounced track from the bounce folder the aiff file that i bounced is faded, you know like i can't click it, it is not in bold type so i cannot select it to re-import it. so i'm stuck. i have tried to bounce it to other folders, and i have also tried to bounce it with a different suffix. but it never works.
anyways. sorry if this was already answered elsewere. but i can't figure it out. have been looking for a while now. please help. thanks
jeff excell

i am trying to import from the file menu. but also when i try and import from the audio menu it tells me i have to select a track. and to be totally honest i don't know what they are talking about. i have tried to highlight (or simply click on) the one of the four audio tracks in my arrange window. but still it tells me to select a track.... ? so ya
when you say "put the spl in place (start) select the track" what is that exactly? mabye i should go read the manual more. it is pretty evident that i am a beginner isn't it?..
anyways, any suggestions?
jeff excell

Similar Messages

  • Really basic help needed bouncing tracks to mp3

    Hi
    We have been working on some new music in MIDI format and really would like to have them available to play on our ipod. I have read the manual on bouncing to mp3 format. However I have 2 problems.
    1) Some tracks don't even allow my to bounce to mp3. When I try to select file>Bounce, I cannot select it as it is not available and is the light grey colour of unavailable items.
    2) The tracks that I have been able to bounce have no sound when I play them back in itunes or quicktime player.
    What do I do to fix these two problems. Thank you for your help.

    Hi and welcome to Logic Express,
    First of all: Bouncing is usually done by bouncing from the Master Output Channel. You should see a small Bounce Button (Bnce) below the Fader (look to the left in the Inspector window - there are 2 Channel Strips. The Left is for the selected Track and the right one usually is the master Output (Out 1-2). Or you can select Bounce from the File Menu. Only Output Tracks can be bounced! You can't bounce individual tracks, but have to route them to an output. Usually, this routing is on by default, so if you didn't change it, it shouldn't worry you.
    See if none of your tracks are muted and if you can actually play back the entire project and hear the desired result in Logic. If so, hit the bounce button below the master output (1-2) fader.
    The second step is to select the right method of bouncing. There should be a popup menu now asking you about filename and so. Enter the desired filename and maybe another folder. If not, Logic names it Output 1-2.mp3, which isn't that bright. To the lower left, u should see some available file formats. Check mp3 (this is important!) first. Also select offline bounce, if not checked. Check if "normalise" is activated. If not, activate it.
    Now, the options change to allow some mp3 specific tweaks. Use the ones you like. I use about 160kbits for stereo, normal stereo mode, and tweak all the ID3 Tags as desired. Also check "add to itunes library".
    Now, before you bounce, check if the start and stop marks of the bounce are actually the same that you want them to be. Sometimes they snap to the last marked region, which isn't neccesarily the correct song length. I messed up some bounces before i got this right.
    If everything looks good, hit bounce. Logic should bounce, normalize and convert to mp3 now. Wait some seconds for iTunes to get the song imported. There you are. If not, ask again
    Fox

  • Record rewire track to audio track

    Hello
    I route the rewire input into an audio track in logic. Can I record the rewire signal directly to this audio track? (even multi-record when routing several rewire tracks into several Logic audio tracks?)
    I can here rewire just fine - but when I rec-enable the tracks and press the record button on the transport - it does not record the rewire input.
    Anyone? Help appreciated.
    Thanks
    best

    Thanks for the reply.
    So with non-real-time bouncing I could go a bit above 100% cpu strain, right? (as I have currently between 80-90% and would like to add a bit of Ozone).
    Am I nuts or is there no option in Logic Pro(?) to bounce to 32bit float? I can bounce to mp3 but not to 32 bit float?

  • Logic 8.0.2 - Bounce midi track out of sync!!!!!

    Hello, sorry my bad English. Quickly explain my problem in logic 8.0.2!!!
    When I try to bounce a midi track (or register midi to audio via aux), when I import the audio track in the project, this is out of sync (enlarging the audio track, start point of the sound is late). I have tried removing all plug in (bypass), I have tried to set the latency, but I have not solved the problem. Even my friend who uses logic has the same problem.
    For to remove all doubt, I tried the same operation in another work platform (Cubase 5), but the problem does not exist.
    Please help me, thank you very much. Fil

    Hey Artkeys,
    I have the same problem here!
    I have Logic Pro 8 installed on my Imac and untill now it worked just fine with my Emagic MT4 midi interface. Now this morning I openend logic and the same error you get popped up: "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers"
    Did u figure out yet what to do to get it to work again?
    Greets, Rad

  • Song names imported as "artist - track name" instead of "track name"

    When I add a folder to my library (a folder which contains MP3 files which all contain complete ID3 tags), about 50% of the song names get imported as "artist - track name" instead of just "track name". If I click on any track which was imported like this, and right-click and select "get info", the track name shows up correctly in the dialog box, and it suddenly fixes the display on the listing (without me doing anything).
    I could fix each song by clicking "get info", but I would have to do this for all my songs, which would take far too long. Is there any way to get iTunes to import these track names correctly? Or is there a way to refresh the listing, and have iTunes re-read the ID3 tags on the MP3 files?
      Windows XP Pro  

    To get the track names etc., when importing a CD, you have to be connected to the Internet.
    This article explains why.
    To get the info later, select all tracks (with the generic track names) of an album and choose 'Get CD Track Names' from the Advanced menu in the menubar.
    Very often the correct information will show up.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.3.9)   Several ext. HD (backup and data)

  • How do I bounce a track to include the... lead in?

    Sorry I didnt know how best to phrase the question. I am implementing music into a game in unity, and due to technical limitations, I need a track that serves as the introduction, and another one that starts at measure X for the purpose of looping.
    Is there a way to bounce a track, say, starting at measure 4, where it includes whatever audio would still be "left over" from previous measures (release trails, reverb, etc). The only way I know of is to bounce it from the beginning and manually chop off the audio, but I'd like to avoid that if possible.
    Hope that made sense.

    Hi
    Maybe the Bounce checkbox "Use 2nd Cycle pass" will help... but it may depend on the material
    CCT

  • Want help speeding up a track on garageband

    Need help speeding up a track. I have an audition song I need to be at 1 min. and I need to speed it up just a bit to fit it all in.  Can't figure it out, any help would be great!

    Mr HangTime,
    I checked the tip on your website and I'm not sure if that is correct.
    An imported audio file turns into an orange Audio Region. Turning on "Follow Tempo & Pitch" will analyze the audio file to create the (invisible) Transient Marker. However this enables only Tempo changes of the Audio Region BUT NOT Pitch changes. The Pitch slider is still grayed out.
    Turning an orange Audio Region into a purple Audio Region will activate the Pitch Slider (not grayed out anymore) but you still can set any Pitch offset. So the turning purple thing seems to be more a cosmetic change which could lead to confusion.
    The only way to utilize Pitch changes on an imported audio file is to turn it into an Apple Loop (Edit > Add to Loop Library) and then grab it from the Loop Browser. Now it is a blue Apple Loop Region with all its advantages, including Pitch changes.
    Can you confirm that, or do you have different behavior on your system?
    Lucylouisie, here are the steps to shorten your audition song :
    Import the audio file into a new Project with an Audio Track (lets have the Tempo at 120bpm). The Audio Region is orange
    Double click on the Audio Region to open the Track Editor and there, select the checkbox "Follow Tempo & Pitch". GarageBand will analyze the audio file and create (invisible) Transient Markers which make the following magic possible. Remember, the Pitch slider is grayed out and applying a Pitch offset to the (orange) audio region is not possible even if the checkbox is labeled "Follow Tempo & Pitch"
    Let's assume your audio region is 1min and 10sec long. You can see that on the Time Ruler (you have to set it to display Absolute Time to show the time and not the bar:beat).
    Now set the LCD Display to "Project" and click on the Tempo which opens a vertical Tempo Slider.
    This is the important part: When moving the Tempo slider up, the Audio Region's length stays the same on the Track Lane but the Time Ruler will stretch to the right. Adjust the slider so the 1min mark on the Time Ruler aligns with the end of your Audio Region.
    What happened: you speeded up the playback  Tempo of your Project and with it the playback Tempo of your Audio Region (remember, "Follow Tempo") so it lasts exactly 1min instead of 1min 10 sec.
    It sounds more complicated than it actually is. Just play around with it and always keep the relationship between playback tempo and Region length in mind. The procedure I just described also helps you to visualize the concept to better wrap your head around that it.(Just for fun, switch the TIme Ruler, to display Musical time, bar:beats and see what is fixed and what is chaining now).
    On a side note, when chaining the playback speed of an audio file, there are two scenarios:
    Scenario A - The change in length changes also the pitch. This is the traditional way with tape machines or using a vinyl record on a turn table).
    Scenario B - The change in length does not affect the pitch which requires additional pitch compensation. GarageBand uses this method and that is what you want in your case: Playing back your audio clip to make it shorter without ending up with a mickey mouse effect of your audio file by transposing it (pitch change).
    Hope that helps 
    Edgar Rothermich 
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Function to bounce single tracks of a project automatically?

    Hi guys
    Is there any function i can use on logic 9, which bounces all the single tracks of a project automatically?
    I have to bounce everything in Audio, cause I am about to send the stems to someone..
    The project has 88 tracks so its quite a job to do it manually..
    Ca anyone help me?
    cheers!
    Jon

    Hi !
    Thx for the answer!
    It worked, but it bounces the tracks without the volume settings..
    Means that the tracks doesn't fit each other what volume concerns..
    I think I will have to do it manually
    cheers

  • Bouncing individual tracks creates 2 wav files for each..why?!!

    When I bounce individually selected tracks from Logic Express, it creates a double wav file in my folder for each track I bounce. It didn't use to do that and I haven't changed any settings... Please HELP :/

    By "double wav" do you mean that you are getting a separate audio file for left channel and another for right channel, something like this?
    Be sure to check in your bounce window that you have "interleaved" checked instead of "split."
    Depending on how you're exporting/bouncing your tracks this may not help, but you can always solo the desired track and bounce your song with "interleaved" selected to get a single stereo file of that individual track.

  • Bouncing my track keeps making my mac crash- any suggestions ??

    I have finished a track and want to bounce it. Ive tried on my mac book pro, but it crashes very soon and say logic had quit unexpectedly. Ive tried bouncing the track several parts at a time IE only the bass line tracks, then the percussion etc etc, but no matter what it crashes. Ive transfered the track to my G5 which has more RAM but the same thing happens. Ive bounced tracks before on my G5 no problem which has loads more parts automation etc. Obviously there is something within the project file thats is making this happen, has any1 had similar problems or know what i can check to try ans resolve this ?
    Thanks,
    Audiodice

    Hi Audiodice,
    I've had a problem like this before. I found that my projects were crashing whilst bouncing, and it was always seemed to be at the same point of the bounce?
    Try to find out what track is causing it to crash, by looking to see roughly where it crashes. Then check your automation at the point of the crash, if there is any automation on the point of crash ie "cutoff filter" take the automation off and try to re bounce. If that works out to be the problem, then I would suggest downloading the latest update for that plug-In. I had problems with Novation V station, and it was cured by downloading the update from there site.
    Cool, I hope this helps mate.

  • I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

    I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

    If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

  • How do I import multiple audio tracks?

    Hi there...
    I have a number of video files that have multiple audio tracks in them. The problem is I can not work out how to get prem to see multiple audio tracks. The files import fine and I have also tried various other formates with multi-track audio.. but only audio "stream 1" is visible in prem.
    What I was hoping is that the video would come in with a 2 audio tracks instead of 1 each in its own "lane".. so I can then use the mixer and the audio files are  linked to the video file and in perfect sync.. (just like when you import with 1 track)
    NOTE: I am not talking about channels.. but complete 2 completely different audio tracks.. and I know that I could extract these audio streams into wavs and then re-sync them but this seams overkill and a duplication of effort... surly there is a way to have prem support more than 1 audio track on a video file?
    --Me

    Well, if PP doesn't bring them in, then best guess is they just don't exist.
    There's really no trick or user adjustment for this that I'm aware of.  You import the file, PP sees what's in it.  I've never observed or read about any other behavior than that.

  • Help Importing New Pictures & Text in Document

    Dear Adobe Customer Service,
           I just purchased your servcie and would greatly appreciate your help importing new photos and text in the document that has been changed from pdf to docx.  I have a Mac and when attempting to change or update photos or text in the document the alignment is totally off and will not allow.
            Can you please help?  Please call me and walk me through the process.  If this matter cannot be resolved I will need to cancel my subscription and get a full refund.
    Thank You
    Dr. Joy Macci
    214-223-3738

    OK, if this is a template file and you are trying to customize a single word, or a list of words that are always in the same places (I was thinking at first that you want to change words in one part of a paragraph if some other trigger word appeared), like a form letter that needs to have the recipients name inserted, then you can use either a custom text variable or Data Merge.
    For one-off production the variable is probably easier -- just redifine the text string  each time you make a new copy, but if you have a list of words and want to make a copy for each one in a single session, Data Merge would be more efficient.

  • ITunes crashes often importing last CD track

    Running iTunes 6 on WinXP (Sony Vaio RS402, 1.5Gb RAM, P4 2.8GHz) I often have a problem with iTunes hanging while importing the last track of a CD (both commerical and burned). Tried using 2 different CD drives but the same problem. Any ideas?

    Thanks. Here's the printout
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RS402(CE)
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.204), RegKill (2.3.0.1),
    UpperFilters: InCDPass (4.2.9.1), GEARAspiWDM (2.0.4.3),
    Video Driver: RADEON 9200 SERIES \RADEON 9200 SERIES
    IDE\DiskST3400832A_____________________________3.02___, Bus Type ATA, Bus Address [1,0]
    IDE\DiskWDCWD1200BB-98DWA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskSony___UMH-U_HS-CF____2.49, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-MS____2.49, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-SM____2.49, Bus Type USB
    IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD_RW_DW-U14A_____________________2.0c___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomXD2501UKJA702C________2.0B, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: SONY DVD RW DW-U14A, Rev 2.0c
    Audio CD in drive.
    Found 13 songs on CD, playing time 45:15 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 03:00:23
    Track 3, start time 03:53:25
    Track 4, start time 05:32:28
    Track 5, start time 10:16:55
    Track 6, start time 13:02:63
    Track 7, start time 14:12:30
    Track 8, start time 18:34:68
    Track 9, start time 21:12:68
    Track 10, start time 26:46:30
    Track 11, start time 27:45:65
    Track 12, start time 35:48:23
    Track 13, start time 39:00:43
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 24.
    The drive CDRW speeds are: 24.
    The drive DVDR speeds are: 24.
    The drive DVDRW speeds are: 24.
    F: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
    Audio CD in drive.
    Found 38 songs on CD, playing time 60:43 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:16:50
    Track 3, start time 07:10:27
    Track 4, start time 10:24:12
    Track 5, start time 12:05:37
    Track 6, start time 13:17:37
    Track 7, start time 16:15:12
    Track 8, start time 19:36:12
    Track 9, start time 21:43:32
    Track 10, start time 22:40:67
    Track 11, start time 29:48:62
    Track 12, start time 31:26:40
    Track 13, start time 32:59:07
    Track 14, start time 39:14:25
    Track 15, start time 42:00:12
    Track 16, start time 44:42:55
    Track 17, start time 47:58:20
    Track 18, start time 48:15:12
    Track 19, start time 48:25:45
    Track 20, start time 48:43:65
    Track 21, start time 50:24:55
    Track 22, start time 50:36:12
    Track 23, start time 50:54:30
    Track 24, start time 51:10:45
    Track 25, start time 51:44:42
    Track 26, start time 51:51:32
    Track 27, start time 52:00:72
    Track 28, start time 52:11:00
    Track 29, start time 52:36:10
    Track 30, start time 55:31:50
    Track 31, start time 55:43:35
    Track 32, start time 55:51:32
    Track 33, start time 56:06:07
    Track 34, start time 56:21:72
    Track 35, start time 56:36:50
    Track 36, start time 56:45:07
    Track 37, start time 57:10:12
    Track 38, start time 60:35:20
    Audio CD reading succeeded.
    Get drive speed succeeded.
    V: XD2501U KJA702C, Rev 2.0B
    Drive is empty.

  • In Logic Pro, trying to import a drum track from the bin to arrange area, the 'follow loop' box does not appear in the inspector

    imported a drum track from bin to arrange area.  It will not follow tempo of the project even though it was recorded in this project.  The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
    how do I set up the track so the 'follow tempo' box appears in the inspector?

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

Maybe you are looking for