Help Importing from External Drive

i store all my music on my external drive and when i open itunes and select preferences. click advanced, then general ... then to select my drive i choose my EXTERNAL... then all is well! all my music goes into itunes and everything is great.
however, when i remove the external by ejecting it, then put it back in, itunes still plays the music but my itunes music folder location is not external...
how can i make it so that it's always my external?

Never open or run iTunes when the external is not connected and mounted. If iTunes runs and can not find the drive it defaults back to the internal drive location.
Patrick

Similar Messages

Best method of importing from external drive?

I have a 1T LaCie and want to know the best method to get those images into LR. The defaults are: "Add" and "NewPhotos" to "MyCatalog"
I think I may have more than one catalog and am not certain how to combine them. Is it best practice to have only one catalog?
Thanks in advance,
Mr Mayor

Duplicate thread, see Best method to import from external drive?

Need help on import from external drive!

I just imported several thousand pictures from an external drive into iphoto 08--unfortunately all photos are listed as one big event--I am now a little confused as to what to do next---I would like them to be imported in the original files (years) if possible...thanks for the help!

In iPhoto preferences (iPhoto menu ==> Preferences ==> events) under AutoSplit events you need to check "Imported items from finder" before you import
Probably the best thing to do *IF THE ONLY THING IN YOUR LIBRARY* is this import is to trash the iPhoto Library from your pictures folder, verify your preference settings and reimport
LN
Message was edited by: LarryHN

Movies re-imported from external drive after crash will not sync to iPod

A while back my hard drive crashed. I had backed up all my iTunes music and movies to an external drive, so I re-imported them to the repaired hard drive after it was installed. All of the music (purchased and ripped) transferred fine, but the movies I had purchased from iTunes will not sync back to my iPod. I've tried selecting them individually under the Movies tab in the "My iPod" screen within iTunes and then syncing, but nothing happens. I've tried re-importing from iTunes and doing the same thing, but to no avail. Help!

while the iPod is connected to itunes, control-click on its name in the source list on the left. click Reset Warnings. try another sync with the movies you want selected. you should get a warning that says either something like this: "There is not enough room on the iPod to sync all selected material. please remove some items." or something like this: "the format of the videos is not supported by the iPod" if it says the first one, do option 1. if it is the second one, do option 2. if it is neither of them, i don't have any ideas.
1.The iPod doesn't have enough space on it to fit all of the video. you have to take someting off the ipod to put anything more on.
2. you need to select the movies in iTunes, then go to the advanced menu and click Create iPod/iPhone Version, or Convert for iPod or iPhone, whichever appears. that will make a copy of the videos in a format that the ipod can read. you can remove the original copy from your library. you can keep the files if you want. now just select the new ones and sync them. everything should work.

Best way to import from external drive that I'm loading LPs on

I'm transferring many LP's to an external hard drive as MP3 in a LP folder.
#1 - What's the best way to import into iTunes and still keep my original file where it is as well as have a copy in iTunes? Would I just import each song individually or could I add folder? I do have the setting checked for copying song to itunes. Just not sure if I should import or add?
#2 - Is there a way to import into iTunes as AAC or do I have to import original MP3 and then convert to AAC? When I do this and try to delete the MPEG-3 songs from iTunes.. I'm somehow also deleting my original MP3 file that's in the LP folder. I believe this pertains to what I'm doing in question #1

None of the above.
There's no importing involved. All you do is open the v6 Library with 09. It will then update the Library, preserving all your work. As always, back up first.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

Need help restoring from external drive

First off, let me say that I am a computer moron.
Three months ago, my MacBookPro (purchased Nov 06) began blinking a folder with a question mark. I went to the Genius Bar and they fixed it using Disk Warrior. They suggested I get an external hard drive and upgrade to OS X. So I did.
Yesterday, I got the blinking folder with question mark again. Went to Genius Bar, they said Disk Warrior would now cost $100 and there was no guarantee that I would recover anything. This time they gave me a new hard drive. I told them that I would use my external hard drive to put pics, music and files back on. My new hard drive was not installed until the store closed so they handed me my computer and sent me on my way.
I thought that putting my pics and music back on would be easy...not so much. Any suggestions on what I should do?
Thanks!

Is the version of iPhoto a complete iLife vesrion different? E.g. - is the reinstalled version the one that came with the mac and you then bought iLife 08 and were running that?
In a pinch you can get at the original in the iPhoto library under "originals" and reimport them - I know you lose albums and the like but they are accessible without iPhoto. They are ordered by date and month in folders so they are likely to be qrouped reasonably sensible in those.

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

It is very difficult to import audio files from extern drives (NAS) into the new garageband

it is very difficult to import audio files from extern drives (NAS) into the new garageband.

Are you trying to open an audio file in GarageBand or a GarageBand project?
To open an audio file drag it from your NAS to a real-instrument track in GarageBand.
If you are trying to open a GarageBand project - can you open the same project, if you copy it to your system drive?
Trying Google translate -
Bent u probeert om een audiobestand in GarageBand of een GarageBand-project te openen?
Om een audiobestand slepen uit uw NAS naar een real-instrument track in GarageBand openen.
Als u probeert een GarageBand-project te openen - kunt u hetzelfde project opent, als u het kopiëren naar uw systeem schijf?

How do I stop iMovie 11 auto importing from external HD?

Okay, I'm going crazy. I, the intrepid Googler, have so far been unable to find the answer to this question. Please somebody help me!
I have hundreds of video clips stored on an external hard drive. However, when I crank it up, iMovie exceptionally irritatingly starts auto-importing every single clip back onto my MacBook's hard drive. No! No! NOOOO! That's NOT what I want! Stop it! Stop it! Stop it! I only want to import ONE video of MY choice at a time to edit and then save it back to the external drive, I don't have enough ROOM for ALL of them on the internal drive, you crazy machine!!!!
So. I go into iMovie preferences, where I'd expect to see an option for turning off auto import. Nope. I cannot see anything there. Do I have menu blindness? Am I losing my mind?
Then I Google 'how to stop iMovie 11 from auto-importing from external hard drive and find nothing. Am I alone in this? Surely not. Am I being a dunce? Possibly.
Advice, anyone?

Okay. Please ignore the above. I was being a dunce. Today, it appears not to be doing it any more. Bizarre. LOL!

Any way to import from another drive and leave clips in place?

Hi
Is there any way to import from other drives where you can leave your media in place?
Whenever I've imported clips from another drive I had to copy them to the library, while clips on the same drive as the library I could leave in place. Besides getting a bit tired of FCP treating like a kid with Alzheimer's, what would one do, say, when a drive gets full? I could see big projects needing more than a single drive.
best
elmer

LIke Russ said, the copy of the entire folder structure is similar to creating a camera archive. This copy or archive is treated just as if it were a camera card - in particular, "leave in place" is not available, and you have the option go import just parts of clips if you want.
so technicay even though they reside in a hard drive this is like importing from camera, as opposed to "import from file".
I Will try to describe how I handle my media. I hope this will help clarify things a bit. I am not saying thus is the way to do things, but it is my way.
I keep archives of the camera cards, which I then erase and reuse.
I import clips from my camera archives which I store as external media (copying to a folder of my choosing instead of into the library). These movie files, plus other files that I get from other sources, can be later imported and used in other libraries using "leave in place".
And all of this of course needs to be regularly backed up.

Broken in Logic 9?: Reindex loops from external drive

Adding loops from an external drive in Logic 9 does not seem to work any longer. It used to work great in L8. Anyone have similar experiences? Know any work arounds? Is it a bug? If it's a bug I'll file it with Apple.
Previously in Logic 8 it was easy to reindex loops on an external drive:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops Index
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L8 asks if you want to copy the loops or use them from their present location. Select present location intsead of copy locally.
(5) L8 takes 5-20 minutes to build index of loops from external drive
I have tried this procedure several times in L9 without success. Instead I get the following:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L9 ask for my admin password.
(5) Enter my password
(6) I'm NOT asked if I want to copy loops locally or use them in their present location. Instead a reindex progress dialog comes up for 2 seconds then goes away.
(7) In the end nothing happened. No loops copied, indexed, or anything
There is only one way I managed to get loops into L9 but it is exactly what I'm NOT looking for:
(1) In the folder with all my loops spotlight search ".CAF" (In this case want to reindex Apple content which is all CAF)
(2) Make sure to click "show more" at the bottom of the search results.
(3) Drag the search results to the loop browser.
(4) L9 indexes them all right, AND also copies them to my user library! All 30 GBs worth. Definitely not what I want.
In the end, I had to reinstall the Loops from the DVDs and specify an external location for them. (This whole mess got started when I tried to move the GarageBand and iLife loops to an external drive. The installer does not let you specify a location for them.)
Just so you know I've done some homework:
I've scoured other Logic forums and found these relevant threads that in the end did not solve the issue. They mostly seem to refer to Logic 8 which does not have this issue.
@ LUG
Thread 1
@ Logic Pro Help
Thread 1
Thread 2
Thread 3 this fellow seems to have a similar problem as I. He drags folders into the loop browser but nothing happens.
@ Apple Discussions
Thread 1
Thread 2

I just installed LP9 and all my loops and samples are on external drives. The drag and drop onto the browser method worked fine and I WAS given the option to move the files or not. The only exception to the above is Ultrabeat samples. They seem to want to be on the System drive.
RW

Can't read iPhoto library from external drive

I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

Network Drive? a NAS?
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
Basically, you need to move the library to a correctly formatted disk.

Message no. O3453 "No additional quantities imported from external applicat

When I run LQ01, the following message appears Message no. O3453 "No additional quantities imported from external application"
Function MB_CREATE_GOODS_MOVEMENT has been called for an HPM material (additional units of measure), but no additional quantities and UoM have been passed to the function. Stock levels cannot be posted correctly without this data.
This material is an HPM MAterial and have additional units of measure.
Any body can help me.
Regards
Vasco

Ariane, thanks a lot,
SAP answer me the same like you from "sap notes"
Togheter with the developer, we doing a changes an OIL & GAS table as details note number 607156 and it´s work good.
Regards
Vasco

Can Disk Utility get SMART status from external drives?

I recently updated my backup plan with a NewerTech quad-interface dock and a WD Caviar Green hd. I'm using the FW800 interface to connect to my iMac (10.6.7) Everything works perfectly, as expected. I noticed, though, that Disk Utility cannot report the SMART status on the new WD drive. DU simply says "Not Supported" under SMART Status.
Is Disk Utility telling me that it doesn't read SMART status from external drives? Or is it telling me that the new drive doesn't support SMART (which I would find highly unusual)? And, if it's Disk Utility that can't read the status, are there any third-party apps that can report the SMART status on an external drive?
Thanks,
JimC

Unfortunately I cannot speak to the NewerTech enclosure, but in principle it appears to be possible to have SMART information displayed even for external drives if the enclosure's bridge controller chip allows it.
My experience:
I've used two MacPower Pleiades FW800/400/USB/eSATA enclosures for several years and I've now supplemented them with two additional inXtron enclosures. They all work as expected daisy-chained to the iMac.
The interesting thing is that the inXtron enclosures came with a CD with some software on it ("Smart AP") which is not available for download, notably a Dashboard Widget for displaying actual and maximum temperatures, total hours of operation, start/stop cycles, drive model and serial number.
This widget is complete garbage, though – it is a nauseating nightmare of extreme over-design at the expense of even basic usability:
http://www.inxtron.com/information-center/smart-ap-for-external-hard-drives
To make matters even worse, it can only display the above information for the first external drive connected.
BUT: This Widget internally calls a command line utility which does the actual parameter retrieval, and that one can be called from the terminal as well.
So after installing the software from CD and effectively discarding the Widget, I checked out the command line utility in the Terminal and found that this utility actually reported data about ALL my enclosures, both the inXtron and the MacPower ones (there seems to be firmware compatibility across these):
(The '$' is supposed to be Terminal's bash prompt – type in only the rest of the respective line.)
$ /Applications/MacpowerAP/GetSMART 1
29 50 13 8
53 67 645 15829
52 53 90 7105
51 52 18 13
Each line reports the following for one connected enclosure:
[temp] [maxtemp] [cycles] [hours]
The drives are reported first USB, then FireWire drives, each in the order of first connection / mounting.
$ /Applications/MacpowerAP/GetSMART 2
WD-WCA**************
WDC WD30EZRX-00MMMB0
5TE09***************
ST31000333AS-00MMMB0
5TE09***************
ST31000333AS-00MMMB0
WD-WMA**************
WDC WD30EZRS-00J99B0
Each drive gets two lines reported, first the drive's serial number ("***" blocking out my exact ones), then the drive model.
$ /Applications/MacpowerAP/GetSMART 3
29 50 13 8
WD-WCA**************
WDC WD30EZRX-00MMMB0
53 67 645 15829
5TE09***************
ST31000333AS-00MMMB0
52 53 90 7105
5TE09***************
ST31000333AS-00MMMB0
51 52 18 13
WD-WMA**************
WDC WD30EZRS-00J99B0
This combines both of the above.
$ /Applications/MacpowerAP/GetSMART 5
disk4
disk1
disk2
disk3
This reports the mounted disk names (referring not to the volume names but to the internal Unix names as in /dev/[drive]); Numbering is in connection / mounting order, the actual sequence is as always USB drives, then FireWire drives.
$ /Applications/MacpowerAP/GetSMART 6
USB
1394
1394
1394
This reports the connection interface for each drive in the same sequence as all other commands.
$ /Applications/MacpowerAP/GetSMART 7
MPT934DS1.20.0104.00
MPT934DS1.20.0104.00
This might report the firmware revision or something like that.
These are the commands I know about, and they apply only to the "Smart AP" software supplied with current inXtron enclosures, but it may be possible that other brands use it as well.
I have not been able to identify information about the self-test (early(?) failure warning), but it might be contained as well in the data reported above.
As always, your mileage may vary and you should never do such experiments without FIRST making sure you've got backups of your data and that such backup is not connected during experimentation!
Maybe this can help some people getting the information they need; And maybe there are similar capabilities with other enclosures. At the very least it demonstrates that with the proper firmware in the enclosures themselves and some software on the Mac it IS possible to get at least some of the SMART information from the drive in an external FireWire- or USB-connected enclosure.
None of that is fed into the system's "official" SMART mechanism, though, so no luck using standard mechanisms or applications for it. It's strictly a command-line affair (deservedly disregarding the mishappen Widget).
Good luck!

Why won't photos from external drive stay on my computer (iPhoto) once I disconnect the external drive?

I'm trying to move photos from my external drive to my new computer. When I connect the external drive, I'm able to view all the photos in iPhoto, and I'm able to drag photos to a desktop folder and/or directly into iPhoto. But, when I disconnect the external drive, I no longer have access to the photos on my computer. I'm sure there's a step I may be overlooking but I'm using the same process I've used in the past and cannot determine next steps.

Thanks so far.
I'm currently working on a 2012 MacBook Air 13", running OSX 10.8.
Upon opening my external drive, I've dragged the iPhoto Library to my computer's desktop. When I've opened iPhoto and tried to import the library (from external drive and/or from the desktop), I'm unable to do so, i.e., the library is not highlighted (it won't allow me to click on it).
I can open and view the library from my external drive in iPhoto when the external drive is connected to the computer. But, once the external drive is disconnected from the computer, I'm unable to view the library
I've tried all of the aforementioned when the "Copy Imported Item(s) to the iPhoto Library" is checked.

Help Importing from External Drive

Similar Messages

Maybe you are looking for