Help importing music files to iTunes?

All of my music is on my Windows Media Player, and I cannot simply drag and drop. and the files are not found in my music file either. So how can I get these file onto my iTunes?

Dont Panic wrote:
All my music is on Windows Media Center, Not a streaming service.
Is there another place to find/get the music files from it. I only have itunes in my music folder.
Windows Media Center normally (always?) uses music managed by Windows Media Player. This is certainly the case with Media Center 2005 and Windows Media Player. (I have not got Vista, and while I have Windows 7, I have not yet installed it).
Therefore I suggest launching Windows Media Player to see all your music, and checking where WMP says the music files are located. Once you have established that, check to see if they are protected by Microsoft's ghastly "Plays for Sure" DRM, if it is then give up. If it is not, then tell iTunes to import the folder(s) that WMP says the music is in.
Note: iTunes for Windows can import MP3, WAV, AIFF, WMA (unprotected), and of course AAC, and Apple Lossless.
I have all my music in Apple Lossless and shared between iTunes, Windows Media Player, Windows Media Center 2005, and can also use it with Roku Soundbridge, Apple TV, and my iPhone. (Yes it is possible to get WMP and Media Center to play Apple Lossless.)

Similar Messages

  • Badly in need of help: Importing asf-files to iTunes

    Hi all,
    I have a truely oldfashioned problem. I work as a teacher and some of the materials I use are on cd-rom using asf-format. I'd really like to import the files to iTunes (and then to my iPad, 3rd gen.) so that it's easier to handle when I don't have access to a cd-rom/dvd drive.
    Do you have any suggestions?
    Best
    The Danish teacher

    http://en.wikipedia.org/wiki/Advanced_Systems_Format
    It might be very, very difficult to work with the files.  It is strange that a CD would use a streaming format since that is usually a web page format.  If it is in a proprietary format you will need a player specifically designed to accommodate that.  then too they may be in WMA format instide that stream which means proprietary format inside proprietary format.  That format is designed primarily for Windos systems so add on a third hurdle.
    You can check out VLC media player and see if it will play them.  You can likely copy the CD to your computer and use if from there.  I don't know if you can find anything to convert though.

  • Help importing music back to Itunes from Ipod

    My Windows 7 computer crashed and needed to re-install windows.  As a result lost all music loading into Itunes (most of it not purchased through Itunes).  I need to know how I can transfer the music from my Ipod back to Itunes.  In the past when connecting the Ipod it automatically starts syncing with Itunes so if I connect it now I assume all the files on the Ipod will be deleted since they are not on Itunes now.  Please help me retrieve all my content and import it back to Itunes.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to import music file from itunes to fcp?

    thanks in advance. I burned from itunes a track on to a cd. then tried to upload from cd to fcp. it plays for about 5 seconds, then stops with error msgs:
    "turn off unlim rt"
    lower compression rate"
    or "lower pref for real time audio track"
    I'm new to fcp and am stuck. can't find help in the books either. any way to just lift a music file straight from itunes to fcp.
    thanks.

    The "media drive" isn't a mac thing...it is a video editing thing. This is a drive that is separate from your main computer's hard drive where you store ALL of your captured footage, audio, video elements, graphics, still photos...everything you use in your video project. You should NOT be using your system drive for this.
    This drive, on the low end, can be a firewire drive. 7200RPM at least.
    You need to copy the music files OFF of the CD and onto your media drive...and you really should be organized about this. Organization is a HUGE part of video editing.
    Shane

  • How can i disable auto playback when importing music files in itunes 10?

    when i downlaod music files that get imported to itunes it automatically plays the music in the background which interupts what i am currently listening to. how can this feature be disabled as it was possible in the past. i have a macbook air and running iTunes 10.

    I am having this same issue when downloading audiobooks from Audible.
    After the download completes in Safari, it imports into iTunes which automatically starts to play the file.
    Damned inconvinent when I am downloading multiple books for work and I am away from my Mac doing other stuff. I have to return to the Mac to manually stop the book each time.

  • Help moving music files to itunes

    Is there an easier way than adding file to library. when i use this i can only do four or five at time

    ensure that you have both 'keep itunes music folder organised' and 'copy files to itunes music folder' checked in the preferences, and then just drag and drop your music files / folders, etc and you can drag GBs worth in one go

  • Importing music files to iTunes

    I'm trying to transfer all of my audio files from my old PC to my macbook. The problem is that they're all .wma format and iTunes won't let me import them. How can I convert them to the proper format, or is there a way I can make iTunes accept this format?

    iTunes for Mac doesn't support .wma files (contrary to the Windows version).
    AFAIK, you have two options.
    Either convert the files on a PC to AAC (or other iTunes for Mac supported format you prefer) or convert them on a Mac using a 3rd party application.
    EasyWMA is such a converter.
    Hope this helps.
    M

  • Duplicate songs when imported music files into itunes

    i imported a significant song selection (10,000 songs) on to i tunes, but there were heaps of duplicates. Any idea why this may be? And how i can stop it happening? Takes ages to delete duplicates.

    *Takes ages to delete duplicates*
    Have a look at Doug's AppleScripts there are a couple of scripts there to help manage duplicates. Search the page for "Corral iTunes Dupes" and "Corral All dupes" : Doug's AppleScripts for iTunes

  • How do I import audio files from itunes to my project?

    I know this could be very easy, I've imported music files from disc to projects before, but they keep going off line. So I want to find out an easier/better process to import music files from itunes into my FCP projects.
    G5: 1G,   Mac OS X (10.4)  

    #5 Imported music from CD or iTunes
    Shane's Stock Answer #5:
    To get music into FCP, it needs to be an AIFF file at 48khz, 16 bit stereo. So if you want a song from a CD, you go into the iTunes Preferences and set this up under the IMPORTING tab:
    File > preferences > importing > import using - AIFF encoder > Setting - Custom
    Sample Rate - 48.000 kHz
    Sample size - 16 bit
    Channels - Stereo
    If you have an mp3 that you want to use, then you can convert it thru iTunes as well.
    If the piece of music you want to use is something you purchased thru iTunes, I'm afraid I can't help you there. There are copywrite issues that prevent files from being converted into the format that FCP can recognize.
    Shane

  • How do I import music files from a flash drive to my iTunes library on my laptop

    How can I import music files from a flash drive to my iTunes library? I put the flash drive into my laptop, selected " add file to library", selected the songs I wanted from the flash drive, and it looked like they were added as the names show under " recently added". Then I removed the flash drive from my laptop But when I select one of the songs and try to play it a message saying "the song could not be used because the original file could not be found. Would you like to locate it?"  So it seems the actual files did not transfer. What do I do? I have done this. With a cd in the past with nsomproble,.

    Suncadia wrote:
    Thank you!! This worked. It does seem there should be an easier way but this did work.
    Dragging the files to "Automatically Add..." is pretty easy once you know where to look.  Just make sure iTunes is running when you do it; otherwise the files will just sit there until the next time you open iTunes.
    (Interestingly, the way you originally tried to do would have worked fine except for one little detail:  you have to first go into Edit > Preferences > Advanced, and check the box for "Copy files..."  If that is not done, iTunes will reference the files on the flash drive, which of course are not accessible once the drive is removed, as you saw.)
    Anyway, glad that all is now sorted.  Enjoy the music!

  • I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?

    I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?
    Thanks in advance.

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • Itunes Crashes when importing Music File or Folder on Windows 7 64-Bit with Itune 10.5 and update ios 5

    Itunes crashes when importing Music File or Folder ever since i updated it yesterday

    You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
    tt2

  • New iTunes Install.  Must I Now Import Music Files?  Or Does iTunes Include Them Automatically?

    I have just installed iTunes on my new computer.  All of my iTunes music files are on my hard disk.  Do I have to take some kind of affirmative action to "connect up" my music files to iTunes?  I don't seem to be able to access any of my music files with iTunes.  Do I have to import all of my music files into my iTunes library before I can listen to the music?  I know this sounds like a dumb question, and I suspect the answer is, "Of course, stupid," but I want some confirmation of what I should do at this point before going ahead.  Anyone?

    I previously had my entire iTunes library on another computer, along with (of course) iTunes as well.  I could happily listen to all the music I wanted with a huge library to select from.  All was well.  Then my computer died.  Fortunately, I had everything backed up - in Carbonite, actually.  I got a new computer last week and recovered all of my data files (including my iTunes music files), which are now on the hard drive of my new computer.
    Then I downloaded iTunes onto my new computer, thinking that, somehow, iTunes would "reach out" and grab all of my iTunes music files, without my having to do anything.  I don't think it works that way, right?  I think I have to import all of my music files into the newly installed version of iTunes, before I will be able to access those files through iTunes.
    Is this correct?
    (I still have the first computer, but I am unable to boot it up.  Since I have recovered all of my music files through Carbonite, I don't see the first computer as an issue, right?)

  • I get an error when trying to import MP3 files in iTunes?

    When I try to import mp3 files into iTunes (version 6), I get an error message of:
    The file "song file name" can not be imported An unknown error has occurred (-50).
    I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
    For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
    (I've tried a complete removal and re-install, but that didn't help)
    Anyone know why I'm getting this error message and how to correct things?
    Thanks in advance for any help !!!

    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
    those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
    I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

  • Problems importing .mp3 files to itunes

    I'm having problems importing .mp3 files to itunes, it's importing the song name tage with "artist - song title" when it should just be the song title?

    Chad, 
    Glad to hear that Steve's script was helpful.
    As to the bug, I don't know.  The problem you report is not common.  Usually when iTunes displays artist-title in the Name field, it is either an untagged MP3 or a WAV file, but in those cases it does not correct itself when you give it a kick.  Between that and the non-refresh problem you report, I think there is something else going on besides a tagging issue.  At your convenience, you may want to reinstall the newest iTunes, and see if it helps.
    Anyway, enjoy the music!
    Ed

Maybe you are looking for

  • Problem in moving one talbe to anlther table

    Hi , we are working in ECC6.0 ,here we are facing problem while moving one table to another table .plz find below code. data : itab1 like p2001,          itab2 like p2002. select single * from pa2001 into itab1 where ........... move-corresponding :i

  • DVD Slideshow Images Flickering

    I was a Window user. Now I am a new MAC user. I bought iMac mainly to do slideshows and video. I heard that MAC is great for slideshows and videos. iLife is great. But.. There is always a but. This is a big BUT and I sincerely hope that going to MAC

  • Elementary trouble creating a web page

    I'm trying to create a home page, which consists of one image. I can't seem to find an efficient way to size the image correctly. It's either too big, or too small. What is the best way to do this? There must be some concrete method rather than triia

  • Adobe Form : detect page break using java script

    Hi, How can we detect a page break at a runtime using java script? I need to display a data in internal table at header and unique for a document number. i've 10 order list which has multiple items, each of the orders are printed in a new page and i

  • Details losing their link on refresh

    I have a report which has been generated from 3 queries with dimension merged across all 3.  I have then created some detail variables so that data can be included on the report that only exists in one of the queries.  that works fine and I have save