Help in ABAP+JAVA Homogeneous System copy
Dear BASIS Gurus,
We have SRM 4.0, Portal 6.0, BW 3.5 and XI 3.0 based on WAS 640, all with
ABAP+JAVA stacks in HP-UX B.11/Oracle 9.2.x.
We are planning Homogeneous System copies to refresh our Development
environment.
After reading the instguides, I'm a litle confused about the best
strategy to use.
Using SAPINST in the source System to export the Database, I have the
dump files with Database data.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yhanks in adavnce.
Best regards.
Arnaldo Calçada.
Hi Arnaldo,
There are basically two method of performing system copy.
1. Using database tool (you can use backup/restore procedure)
2. Using SAPINST tool (export/import)
This is applicable for both ABAP and JAVA.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
It depends which method you are using.
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yes if you are using 2nd method.
Hope this will help.
-Pinkle
Similar Messages
-
Link for JAVA homogenous system copy for oracle
hi
I am unable to find the document for JAVA homogenous system copy for Oracle for NW04 & NW04s
kindly find me the link
thx
regards
ShoebHi
Here you go...-
[JAVA Sytem Copy for ORACLE |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cd76e07d-0c01-0010-298d-f699863f2ce4]
Regards
Jhony -
Needs link for JAVA homogenous system copy NW04 & NW04s
hi
I am unable to find the document for JAVA homogenous system copy for NW04 and NW04s.
kindly plz provide the link for it
its urgent
thanks
regards
ShoebHi,
try [http://service.sap.com|http://service.sap.com] -> Relase & Upgrade-Info -> Installation and Upgrade ...-> SAP NetWeaver -> SAP NetWeaver 7.0 -> Installation -> Installation - SAP NetWeaver Systems
Kind Regards
David Heidbrink -
Help !!! Homogeneous system copy hold on step: Create Database
Group,
we use homogeneous system copy to install PRD system. The system hold on step : create databse.
When we check the server and found the data library has been restored from tape. The installation just hold on the step and can't going on. And there is not additional information on install directory except to see the file keydb.xml were updated.
Could we adjust the file keydb.xml to continue the installation ? If we could, how ? Thanks in advance.
Regards.
JennyHi Jenny,
The first question would be:
Is the database restored properly ?
How many objects are in there ?
First stop the SAPinst program so that no "duplicate updates" happen on the log/xml files.
Most likely you are doing this on another server and therefore the old users are not available which creates an error during restore. This causes often/always an abnormal end of the SAPinst.
If this is the case, you might want to check the keydb.xml after that you copied that and search for "ERROR" in uppercase and the finally try to set this to OK. If you then rerun SAPinst, this problem is hopefully solved. Unfortunately this is more or less an "standard-error" in this procedure - at least up to 1 year ago I don't know on any generic solution. That's why I do not use this procedure if not really necessary.
Regards
Volker Güldenpfennig
P.S.: Do not forget to distribute forum points as in the last questions - otherwise, you will receive less and less answers ... -
Error during Homogenous System copy of ABAP+JAVA stack
Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
SameerHi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 04
M sid COP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm) 10056 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0649D5C8 064A2B64 064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 07.01.2008 18:45:28 1199711728 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI .
A Source LSUGIU08 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer -
Homogeneous System copy of ABAP+JAVA stack ( PI )
Hi everyone,
I am planing to do Homogeneous system copy of our existing NW 7.0 SR3 PI System ( ABAP + JAVA).
Can anyone help me with step by step details to do in source system and target system?
Thanks..Hi,
You should follow the system copy guide for the different option while doing the system copy
- database dependent
- R3load based (export/import)
The following document you can use as a reference, (note -this has been done on database dependent method)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000
Regards,
Debasis -
Homogeneous System copy for Netweaver 2004S SR1 ABAP+JAVA- Oracle/windows
Hi All,
I am planning to do Homogeneous System copy of our production system to New Test system which SID is different from production system. I don't want to do system copy through SAPinst(R3load) because I cannot down our production server. I want to create the New test system from the offline back.
I have already installed our new system. I want to do system copy through Oracle-Specific Procedure as mentioned in the system copy documents.
Could you please tell me how to do sytem copy step by step and how to change the SID.
Thanks in advance.
HarishHi Rohit,
When I am trying to create the control files then I am getting following errors :
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'%ORACLE_HOME%\DATABASE\DBS1%ORACLE_SID%.ORA'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified
As per the oracle procedure I have deleted all three control files from the target system. after copied the sapdata files,origlogA,mirorlogB. I have also copied the control.sql and init<target_SID>.ora file which I created on the source system with the compand ora_br_copy.
I have copied control.sql. in the install_dir of the and init<target_SID>.ora in \oracle\SID\102\database directory.
could you please let me know why this error is coming or you could send me document if you have.
Thanks in advance.
Harish -
Urgent Help Homogenous System copy
Hello!
We have SAP Portal 6.0 ABAP+JAVA WAS640, in Windows 2003 and Oracle
9.2.x.
We are updating our devellopment environment, doing a Homogeneous
System copy using the R3load copy method.
Creating the ABAP Database Instance in the target system, in step
Database Load, SAPINST ask a Migration Key...
Any suggestion ?
Thanks in advance.
Arnaldo Calaçda.About migration key go to http://service.sap.com/migrationkey and also take it.
But usually it is required at heterogeneous system copy,you do not need to enter any migration key (for a homogeneous system copy). Describe your system more full and read the migration log, for exemple can be such as Note 747773
Award if helpful. Regards. -
Homogeneous System Copy - Help me
Hi,
I need to refresh the Training environment with the QAS environment data then I did the client copy from QRP(QAS environment) to TRN (training environment). This copy was made successfully, but with some data inconsistences.
And then a decided to do a Homogeneous System Copy.
I did the HSC selecting the option "Standard System Copy/Migration (R3Load-Based) " but exist the another option "System Copy / Oracle Backup/Restore".
And my doubt is: the process that I need to do is the Standard System Copy / Migration (R3Load-Based) or System Copy / Oracle Backup/Restore?
And the inverse process (import), can I to install just a Database Instance, once that a Central Instance already exists?!
Thanks and Regards,
Dany AndersonHii the process you need to do is system copy . In system copy there are two ways one by using R3load tool and other is backup method. Generally the backup method is faster where all your database will be backedup and copied to the target system. R3load and oracle backup are just two methods of doing system copy.
homogeneous system copy if your target system is on the same operating system and database system as your source system. The database contents are copied from the source system to the target system.
You perform a heterogeneous system copy if you want to change the operating system or database system. Migration is another term for a heterogeneous system copy.
Please reward points if useful -
Homogeneous system copy ECC 6.0 EHP4 dual stack system
Hello ,
I have a requirement of homogeneous system for the below Source system
Source system :
ECC6.0 EHP1 ABAP+java dual stack system with DB2 AIX
Required Target system:
ECC 6.0 EHP1 (same as target system except single stack java not required)
1 .I was trying to use db specific homogeneous system copy method wiht redirected restore script
2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .
please help us to proceed further.
Thanks in Advance.2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
What did you choose to do in database specific method - DB2 backup/restore ?
//Backup Restore
Homegeneous system copy(database specific method)
Target -
As I understand, you have started IMPORT using SAPinst for target system installation. During IMPORT, what target system installation (only ABAP or what ?) you chose ?
//I took ABAP+JAVA
'Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .'
This is because the source system is ABAP+Java, and now during target system installation, then IMPORT procedure is asking for Java Export dump.
Thanks -
Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA
Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01" ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 ) TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000" ("REQUEST" VARCHAR2 (000090) DEFAULT ' ' NOT NULL, "DATAPAKID" VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "PART
NO" NUMBER (000010) DEFAULT 0 NOT NULL, "RECORD" NUMBER (000010) DEFAULT 0 NOT NULL, "PLANT" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "MATERIA
L" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "RPA_CURUOM" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RPA_MVF" NUMBER (000017, 000002) DEFAULT 0 NOT N
ULL, "PRICE_UNIT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RPA_QTYUOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_SSMFGR" VARCHAR2 (000024)
DEFAULT '00000000' NOT NULL, "BASE_UOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "FRE_PLNPUR" VARCHAR2 (000036) DEFAULT ' ' NOT NULL, "FRE_MINS
TK" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SERLEV" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SELCLS" VARCHAR2 (000003) DEFAULT '
0' NOT NULL, "FRE_REPLST" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "ABCKEY" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RECORDMODE" VARCHAR2 (000003)
DEFAULT ' ' NOT NULL, "RT_SERVLEV" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RT_SUPS" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "VAL_TYPE" VARCH
AR2 (000030) DEFAULT ' ' NOT NULL, "PUR_GROUP" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VPNEU" NUMBER (000017, 000002) DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VRKPE" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "DISMM" VARCHAR2 (000006) DEFAULT ' '
NOT NULL, "SALES_UNIT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VP_BT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_BT" NUMBER (000017,
000003) DEFAULT 0 NOT NULL, "RT_VP_NT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_NT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "R
T_VWAERBT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VWAERNT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VPMEIBT" VARCHAR2 (000009) DEFAULT '
' NOT NULL, "RT_VPMEINT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "LOC_CURRCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL, "CM_MCATDIV" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT1" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT2" VARCHAR2
(000054) DEFAULT ' ' NOT NULL, "CM_CDT3" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT4" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_HIEID"
VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "CPSTLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "CPSVLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL
, "STOCK_VAL" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "STOCK_QTY" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL, "RT_SEASYR" VARCHAR2 (000012) DEFAULT '0000' NOT NULL, "CALDAY" VARCHAR2 (000024) DEFAULT '00000000' NOT NULL, "CALWEEK"
VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "RF_BNDID" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "/BIC/ZCATTR3" VARCHAR2 (000006) DEFAULT ' ' NOT
NULL, "/BIC/ZCSTYLE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCIMAGE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCBRNDTYP" VARCHAR2 (000
003) DEFAULT ' ' NOT NULL, "/BIC/ZCGROUPE" VARCHAR2 (000054) DEFAULT ' ' NOT NULL) PCTFREE 10 PCTUSED 00 INITRANS 001 TABLESPACE STORAGE (
INITIAL 0000000016 K NEXT 0000001024 K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0000
FREELISTS 001 FREELIST GROUPS 01) PARTITION BY RANGE ("PARTNO") ( PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN (00000
00002) NOCOMPRESS ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DBhello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael -
Homogeneous system copy db-specific procedure, Incorrect Migration Export?
Hello,
I am still attempting to perform a homogeneous system copy of a NW2004s WebAS Java EP portal system using database-specific system copy with Oracle. OS is Suze 9 Linux.
I am on the very last step of sapinst on the target system and I have the error message:
You entered: /oracle/CEP/sapdata1/systemcopyout/JAVA Found the label SAP:JMIG:700:::* but need the label SAP:MIGSDM:700:::*
I'm pretty sure I followed the correct procedures to export the source system, using the database-specific procedure but it appears that only the JAVA portion was exported while the import is looking for SDM.
Does anyone have any suggestions?
Thanks,
Judith LeitnerHi Judith,
In my experience please use SAPINST to export your JAVA system as well, as because the J2EE Engine not only keeps information from in the JAVA Database but also on the file system (e.g. the ones from SDM).
Thus, please do the following:
1. Export your source database using SAPINST (which in turn calls JLoad).
2. Import into your target system using SAPINST (which in turn calls JLoad).
This is proven and should help.
Regards, Dibya -
Homogeneous System Copy failing on Phase Running J2EE Migration
Hi All,
I am running a Homogeneous System Copy according to the System Copy manual. (SAPinst not SV/RST) It is failing on Phase Running J2EE Migration which tells me to look at my RUNJMT.log (below), but it doesn't seem to give me much direction. As anyone run into this before?:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > IBM DB2 for i5/OS > Target System Installation > Central System > Based on AS ABAP and AS Java > Central System( Last error reported by the step :Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: ' com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server, at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108) at com.sap.engine.core.configuration.impl.cache.CachedConfiguration. (CachedConfiguration.java:62) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748) at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734) at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108) at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403) at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/.
runjmt.log:
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)Here is version '9' fo the SAPinst.log
INFO 2010-06-15 09:20:24.952
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\x.
INFO 2010-06-15 09:20:24.952
Removing file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\x.
INFO 2010-06-15 09:21:12.656
Creating file C:\Program Files (x86)\SAPinst\x.
INFO 2010-06-15 09:21:12.656
Removing file C:\Program Files (x86)\SAPinst\x.
INFO 2010-06-15 09:21:28.313
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.24.xml'.
INFO 2010-06-15 09:21:39.798
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.25.xml'.
WARNING 2010-06-15 09:22:11.095
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2010-06-15 09:22:18.595
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/inifile.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/inifile.9.xml'.
INFO 2010-06-15 09:22:23.798
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/keydb.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/keydb.9.xml'.
INFO 2010-06-15 09:22:38.814
Copied file 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.xml' to 'Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/statistic.26.xml'.
INFO 2010-06-15 09:22:45.908
Execute step RunMigrationController of component |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0
INFO 2010-06-15 09:23:25.675
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\runJmt.log.
INFO 2010-06-15 09:23:32.175
Working directory changed to Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/jmt.
INFO 2010-06-15 09:23:39.800
Working directory changed to Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS.
INFO 2010-06-15 09:23:39.956
Removed environment variable JANITOR_400 from current process environment.
INFO 2010-06-15 09:23:44.878
Output of \qopensys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath /usr/sap/BID/SYS/global/sltools/sharedlib/launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/BID/SYS/global/sltools/jmt:/usr/sap/BID/SYS/global/sltools/sharedlib import.switch resume downtime mti.properties is written to the logfile Y:/usr/sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS/runJmt.log.
WARNING 2010-06-15 09:23:45.456
Execution of the command "\qopensys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath /usr/sap/BID/SYS/global/sltools/sharedlib/launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/BID/SYS/global/sltools/jmt:/usr/sap/BID/SYS/global/sltools/sharedlib import.switch resume downtime mti.properties" finished with return code 2. Output:
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
ERROR 2010-06-15 09:23:45.534
CJS-20068 Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.
ERROR 2010-06-15 09:23:45.534
CJS-20068 Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.
ERROR 2010-06-15 09:23:46.644
FCO-00011 The step RunMigrationController with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController was executed with status ERROR ( Last error reported by the step :Error when running the Java Migration Toolkit. SOLUTION: See output of logfile Y:\usr\sap/SAPinst/NW04S/LM/COPY/DB4/SYSTEM/CENTRAL/AS//runJmt.log: '
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: cluster_data/server,
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:108)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:882)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:748)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl._getSourceIds0(ClusterDataImpl.java:54)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.getServerIds(ClusterDataImpl.java:108)
at com.sap.sdt.serviceframework630.impl.ClusterDataImpl.createIdMapping(ClusterDataImpl.java:174)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.prepareSwitch(MigrationToolImport.java:1129)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:403)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)'.).
INFO 2010-06-15 09:26:38.491
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController".
INFO 2010-06-15 09:29:23.322
Creating file C:\Program Files (x86)\SAPinst\.lastInstallationLocation.
INFO 2010-06-15 09:29:29.510
Creating file Y:\usr\sap\SAPinst\NW04S\LM\COPY\DB4\SYSTEM\CENTRAL\AS\__instana_tmp.xml. -
Homogeneous system copy using export/import on WIn/Ora
Dear experts,
i need to know the homogeneous system copy procedure using export/import method for following scenario as we are in the process of Data center migration of SAP systemsfrom location to another location.
Source system:
ECC6/BI7/APO(ABAP stack)
OS:WIndows 2003
D:B:Oracle 10g
Target System: New hardware installed on Virtual environment(VMware)
No change of SID
ECC6/BI//APO
OS:WINDOWS2008
D:B: Oracle 11g
It would be great if anyone can share the documentu2019s/links (Not SAP homogeneous system copy guide) which you have prepared for the homog. system copy using export/import on Windows/oracle as i have done the system copy using backup/restore for ABAP stack and export/import for Java stack so far.
Therefore i am not sure about this procedure/prerequisites/checklist needs to prepare as i have gone through the SAP guide but it is not step by step document.
CheersThere are two approacahes for your project
1) First wether to use Oracle11g on target database
2) Continue with Database Oracle 10.2 on traget database
If you want to use Oracle11.2 on your target database you have to search the installers which are supported for 11.2 database. If the installers are available then only you can install your target database using Oracle11.2.Other wise t use Oracle10.2.0.4 is supported on Win2008r2. You can use this version of Oracle database to build ur target database.It works fine . Absolutely no problem.
Later on you can upgrade the Oracle10.2 to 11.2 Onwards.
If installers are avialble you can use Oracle11.2 also. There is absolutely no problem.
As per my knowledge installers are available and supported with Oracle11.2.Also check the PAM before arriving on any deciscion. -
Solaris Cluster Server Homogeneous System Copy
Hi,
We have SAP ECC 6.0 on Solaris Sparc server. Our database is Oracle 10.2.0.2. We will buy 2 new solaris server and we want to use these server as cluster. We want to make homogeneous system copy from current server to new cluster server. How can we make homogeneous copy from current server to new cluster server? Firts of all do we have to install new ECC 6.0 on cluster server and then will we make homogeneous system copy?
Also how can we install ECC 6.0 on Solaris Cluster server? Will we have install ECC 6.0 seperatly for each server of cluster unit? I have SAP installation document but it is not clear. Do you have another document for SAP installation on cluster server? Please help us about these issues.
Best regards.First to move your ECC system from your current server to the new server, yes you do need to homogenous copy. There are other methods like storage sub-system level copy, but it is not supported. Since your system is ABAP, you can setup standby database on the new server and use dataguard to replicate database. You can manual move profiles, binaries and other application file systems manually since they are on external storage. You should change your profiles to use logical hostname instead of the physical hostname though Solaris 10 gives you the ability to move zone/containers with same hostname.
I am assuming you have distributed system, ie database and SAP separate. You can setup RAC for database HA. For SAP, you can use sun cluster or veritas cluster to move SAP central instance with the logical hostname to the 2nd standby server.
You can also separate ASCS from SAP central instance and setup failover for the CS instance with the cluster software. Check notes 821904, 870652. You can take another step in HA with ENQ replication (see http://help.sap.com/saphelp_nw70/helpdata/EN/36/67973c3f5aff39e10000000a114084/content.htm)
-Regards
Maybe you are looking for
-
This may be a dumb question. My son gave me his shuffle. How would I change the name of the shuffle from him to me? I have no manual and check the manual online, could not find info. Thanks for any help
-
I am a newbie to Forms development. I have Forms Builder downloaded, also WebLogic Server. Oracle Classic 11g and Oracle Fusion Middleware 11.1.1.2.0 I have WLS_FORMS started and I can access the Weblogic admin and EM applications. I have left the We
-
Maxl to clear partial data in ASO applications
Hi , Is there a maxl statement to clear partial data from ASO applications? Thanks Kannan.
-
How to optimize this query? Please help
i have one table(argus) having 80,000 rows and another table (p0f) having 30,000 rows and i have to join both table on the basis of time field. the query is as follows select distinct(start_time),res.port, res.dst_port from (select * from argus where
-
My son just installed adobe photoshop elements 12 on my mac computer. Every time I try to move a photo to a folder it says "you do not have permission to move this photo" . Why and how do I fix it? I am not computer savvy and my son does not know