Help in abap program
hellow i have a table itab with value (ex. error value) and i wont to select some value from tables ( defined below.) and put it in table err_itab my problem is in the loop i dont now how to continued from their i thihk with append to intrernal tables and after to do read to err_itab, but im not sure this is my program any suggestion. thankes for your time and suggestion.
form write_2_file .
IF file_ser IS INITIAL.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
filename = l_name
FILETYPE = 'ASC'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
OPEN DATASET file_ser IN TEXT MODE
ENCODING DEFAULT FOR INPUT.
IF sy-subrc NE 0.
MESSAGE e002(yhr) .
ENDIF.
DO.
READ DATASET file_ser INTO wa_itab.
IF sy-subrc NE 0.
EXIT.
ENDIF.
APPEND wa_itab TO itab.
ENDDO.
ENDIF.
endform. " write_2_file
FORM get_data .
CLEAR wa_itab.
LOOP AT itab INTO wa_itab.
IF wa_itab-action = 'y1'
OR wa_itab-action = 'y2'
OR wa_itab-action = 'y3'.
SELECT SINGLE ansvh
FROM t542a
INTO wa_b_itab-ansvh
WHERE molga ='IL'
AND ansvh = wa_itab-contract.
IF sy-subrc <> 0.
APPEND wa_b_itab TO b_itab.
SELECT SINGLE werks btrtl
FROM t001p
INTO (wa_c_itab-werks, wa_c_itab-btrtl)
WHERE molga ='IL'
AND werks = wa_itab-personnel_area
AND btrtl = wa_itab-personnel_subarea.
IF sy-subrc <> 0.
APPEND wa_c_itab TO c_itab.
SELECT SINGLE objid
FROM hrp1000
INTO wa_d_itab-objid
WHERE otype = 'S'
AND objid = wa_itab-plans
AND begda <= currnt_date
AND endda >= currnt_date.
APPEND wa_d_itab TO d_itab.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
<i>I have added authorization check in ABAP program(Progran level security).</i>
i assume you have coded call authority within the program.
<i>If an end user runs the transactionm, then which authorization check will fire first?</i>
if he calls the transaction, then first authorization attached to the transaction will be checked.
but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
<i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
it depends,
if you are calling your transaction like
webgui/?~transaction=<tcode> then first tcode level authorization.
if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
Regards
Raja
Similar Messages
-
hi all,
i need to design flow chart for checking for a program whether it satifies the abap coding standards or not. who to do it. if possible send me graphical representations [flow charts] or links to find programming standards.
some of my requirements in that folw chart are
1. how to recognize a blank space in a given program,
2. how to recognize a comment,
3. how to check wheteher a keyword is used or not,
4. how to identify the ' :' symbol
thanks & regards,
suresh babu aluri.plz go through this documementaion,
i think its helpful.
ABAP Programming StandardsContents
1. Objective 5
2. Naming Conventions 5
2.1 Codes for naming conventions 5
2.1.1 Module Codes 5
2.1.2 Free text 6
2.2 Naming Convention of Development Objects 6
2.2.1 Package 6
2.2.2 Executable Program 6
2.2.3 BSP Application 7
2.2.4 Logical Database 8
2.2.5 SAP Scripts /Smartforms 9
2.2.6 Idocs 9
2.2.7 Transaction Code 10
2.2.8 Function Groups 10
2.2.9 Dictionary Objects 11
2.2.10 Message Class 11
2.2.11 Enhancement Projects (User Exits) 11
2.2.12 LSMW Objects 12
2.2.13 Classes 12
2.2.14 BOR Object Types 13
2.2.15 Screen / Transaction Variants 13
2.2.16 Area Menu 13
2.3 Naming of Sub-Objects 13
2.3.1 Program Sub-Objects 13
2.3.2 SAP Script /Smartform sub-objects 14
3. General Programming Guidelines 14
3.1 Modification Logs 14
3.2 Program Organization 15
3.2.1 Executable Programs 15
3.2.2 Dialog Programs 15
3.3 Package 15
3.3.1 Adding Components to existing objects 15
3.3.2 Creation of New Objects 15
3.4 Program Messages 15
3.4.1 Adding Messages to existing landscapes 15
3.4.2 Creation of New Objects 16
3.5 Dictionary Objects 16
4. Structure of ABAP Programs 16
4.1 Type 16
4.2 Status 18
4.3 Authority Check 18
4.4 Program Structure 19
4.4.1 Declaration data for global data, classes and selection screens 19
4.4.2 Container for Processing Blocks 19
4.4.3 Calling Processing Blocks 20
4.5 Screen Flow Logic (Dialog Programs) 20
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic. 20
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction. 20
4.6 Main Program 20
4.6.1 Events 20
5. General Coding Standards 21
5.1 One command per line 21
5.2 Indented Source Code 21
5.3 Extended Syntax Check 21
5.4 Reusability and Modularity 21
5.5 Text Handling 21
5.6 Usage of System Variables 22
5.7 Chaining Statements 22
5.8 Common Routines 22
5.9 Dialog Messages 22
5.10 Function Keys 23
5.11 Enqueuing and Dequeuing Data Objects 23
5.12 Error Handling (SY-SUBRC) 23
5.13 General Conventions and Hints 24
5.14 Parameters in Sub-Routines 24
6. Performance Standards 25
6.1 General Tips on Performance Tuning 25
6.1.1 Avoid Redundant code 25
6.1.2 Subroutine Usage 25
6.1.3 Case vs. Nested IF 25
6.1.4 Using the MOVE Statement 25
6.1.5 SELECT Queries 25
6.1.6 Using the READ statement 27
6.1.7 Hashed table 27
6.1.8 Transporting 28
6.1.9 Using LDB 28
6.1.10 Append Lines of 28
6.1.11 Use WHILE 28
6.1.12 DELETE <itab> WHERE 28
6.1.13 Using WHERE clause in LOOP .ENDLOOP 28
1. Objective
The objective of this document is to describe general programming guidelines, methodologies, Naming conventions and performance guidelines for all the programs developed for SAP Project.
2. Naming Conventions
This chapter describes the naming conventions to be followed for naming the programming objects for SAP project.
2.1 Codes for naming conventions
The variable portion of naming convention is given with Code ID given in angle brackets(<>). Use the following tables for replacing code IDs with codes in the object naming.
2.1.1 Module Codes
Code ID: mm
Code Description
FI Finance
CO Controlling Module
MM Materials Management
PP Production Planning
SD Sales & Distribution
QM Quality Management
PM Plant Maintenance
IM Inventory Management
WM Warehouse Management
BC Basis Module
BW Business Warehouse
WF Workflows (Master Data Management)
HR Human Resources
EBP EBP
PS Project Systems
PCP Synpro: Product Costing
PAP Synpro: COPA
DP APO : Demand Planning
SP APO : Supply Network Planning
DS APO : Production Planning & Detailed Scheduling
AT APO : Global ATP
TP APO : Transportation Planning/Vehicle Scheduling
CI Core Interface
LC Live Cache
2.1.2 Free text
Code ID: ffff
Developer should replace ffff with meaningful text. The text can be multiple words separated by underscore.
2.2 Naming Convention of Development Objects
2.2.1 Package
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Dev. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.2 Executable Program
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
3. The maximum permissible length for program name is 30 characters. However, the name should be restricted to 25 characters to accommodate appropriate Include naming as described in 2.2.2.
Examples:
Program Name Description
ZFI_VAT_RET FI: Report for VAT Return
ZMM_AUTO_GR MM: Automated Goods Receipt
ZSD_XX_STCK_SHORTAGE SD: Stock shortage report for stock allocation
2.2.2.1 Includes for executable programs
Naming Convention: Z<mm>_<ffff>_<Inn>.
Notes:
1. All includes of executable program will be prefixed by Z, followed by the same program name as described in 2.2.2 above.
2. Replace <Inn> with include type and sequence number. Use the following table for includes.
Include Type ID Description
TOP Top Include.
Fnn Subroutine pool (Forms)
Inn PAI Modules
Onn PBO Modules
Xnn Other Includes
The maximum permissible length for Include name is 30 characters.
Examples:
Include Name Main Program Name Description
ZFI_VAT_RET_TOP ZFI_VAT_RET FI: Report for VAT Return Top Include
ZFI_VAT_RET_F01 ZFI_VAT_RET FI: Report for VAT Return Forms
ZMM_AUTO_GR_TOP ZMM_FR_AUTO_GR MM: Automated Goods Receipt Top include
ZMM_AUTO_GR_F01 ZMM_FR_AUTO_GR MM: Automated Goods Receipt Forms
2.2.3 BSP Application
2.2.3.1 Main Application
Naming Convention: BSP Applications shall follow the same Naming Convention as Executable Programs i.e. Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
2.2.3.2 Pages & Controllers
Naming Convention: <ffff>
Notes:
1. Replace <ffff> with meaningful text, that adequately describes the function of the page/controller
2.2.3.3 Theme
Naming Convention: Z_<ffff>.
Notes:
1. Replace <ffff> with meaningful text
2.2.3.4 Mime Objects:
Naming Convention: <ffff>
1. A MIME Object can be logo for the company.
2. Replace <ffff> with meaningful text, that adequately describes the function of the MIME objects
2.2.3.5 Controller and Handler Classes:
See section Classes (Section 2.2.133)
2.2.3.6 BSP Extension
Naming Convention: Z_<ffff>
Notes:
1. Replace <ffff> with meaningful text
2.2.3.7 BSP Layout elements id
Label: lb_fffff
Input field: if_fffff
Button: b_fffff
Text Edit: te_fffff
Text View: tv_fffff
Radio button Group: rbg_fffff
Radio button: rb_fffff
Check Box Group: cbg_fffff
Check Box cb_fffff
Tray tr_fffff
Tabstrip ts_fffff
Tableview tab_fffff
1. Replace <fffff> with meaningful text
2.2.4 Logical Database
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text
3. The maximum permissible length for LDB name is 20 characters. However, the name should be restricted to 15 characters to accommodate appropriate Include naming
4. LDB Program and LDB Program Includes shall follow the naming convention Auto-Generated by SAP
2.2.5 SAP Scripts /Smartforms
Naming Convention: ZF<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
Examples:
Form Name Description
ZFFI_EMP_CONF Employee Confirmation Letter
ZFFI_ANN_TO Annual Turnover Letter To Customers and Vendors
2.2.6 Idocs
2.2.6.1 Idoc Types
Basic Type :
Naming Convention : ZB<FFFF>NN
Notes:
1.Replace <NN> with sequence number.
3. Replace <ffff> with meaningful text.
Extension Type : ZX<Basic type name>_NN
Notes:
1. Replace <NN> with sequence number .
2.2.6.2 Message Types
Naming Convention : ZM<mm><ffff>.
Notes :
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text .
2.2.6.3 Process Code
Naming Convention : Z<ffff>.
Notes :
1. Replace <ffff> with meaningful text ..
2.2.6.4 IDOC Segments
Naming Convention : Z1<ffff>.
Notes :
1.Replace <ffff> with meaningful text as illustrated in examples below.
2.2.7 Transaction Code
Notes:
1. The tcode name is provided by SAP TIN The Developer must write a mail to SAP Tin asking for the T-Code name with a filled form.
The form can be found at :
2.2.8 Function Groups
Naming Convention: Z<mm><ffff>
Notes:
1. Replace <mm> with relevant module code as given above
2. Replace <ffff> with meaningful text.
2.2.8.1 Function Group Include Programs
Naming Convention: LZ<Function Group><Inn>.
Notes:
1. All includes of Function Group program will be prefixed by LZ, followed by the Function Group name
2. Replace <Inn> with include type and sequence number. Use the values from the table given in 2.2.2.1
Examples:
Include Name Function Group Name Description
SAPLZMMPURCHASING ZMMPURCHASING F.Group-Purchasing: Main Program
LZMMPURCHASINGO01 ZMMPURCHASING F.Group-Purchasing: PBO
LZMMPURCHASINGI01 ZMMPURCHASING F.Group-Purchasing: PAI
LZMMPURCHASINGF01 ZMMPURCHASING F.Group-Purchasing: Forms
LZMMPURCHASINGTOP ZMMPURCHASING F.Group-Purchasing: Data Declarations
2.2.8.2 Function Modules
2.2.8.2.1 Normal Function Modules
Convention: Z_<mm>_<ffff>.
Notes:
1. Replace <mm> with relevant module code as given above.
2. Replace <ffff> with meaningful text.
2.2.8.2.2 IDOC Function Modules
Convention: Z_IDOC_<mode>_<msg type>.
Notes:
1. Replace <mode> with INPUT or OUTPUT depending on whether the function processes incoming or outgoing IDOC.
2. Replace <msg type> with the IDOC message type.
2.2.9 Dictionary Objects
Tables: Z<mm><ffff>
Structures: ZS<mm><ffff>
Views: ZV<mm><ffff>
Data Element: ZDE<mm><ffff>
Domain: ZDO<mm><ffff>
Table Type: ZTT<mm><ffff>
Type Group: Z<ffff>
Search Help: ZSH<mm><ffff>
Lock Object: EZ<mm><ffff>
Notes:
1. Replace <mm> with module code given above.
2. Replace <ffff> with meaningful text.
2.2.10 Message Class
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Msg. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.11 Enhancement Projects (User Exits)
Convention: Z<XX><nn>.
Notes:
1. XX is the application area code e.g. for sales it is SD etc.
2. 'nn' is one up number for one application area. It starts with 001.
3. Maximum length of the Project name is 8.
Example: The name of the SD enhancement project can be ZSD001.
2.2.12 LSMW Objects
2.2.12.1 Project
Naming Convention: ZM_<ffff>.
Notes:
1. 1. Replace <ffff> with meaningful text
2. The maximum permissible length for Project name is 16 characters. But please limit it to 12.
Example : ZM_VENDOR
2.2.12.2 SubProject
Naming Convention: ZM_<ffff>_<n>.
Notes:
Suffix Project name with a running sequence no.
Example : ZM_VENDOR_1
2.2.12.3 Object
Naming Convention: ZM_<ffff>_<n><n>.
Notes:
Suffix Subproject name with a running sequence no.
Example : ZM_VENDOR_11
2.2.13 Classes
Naming Convention: ZCL_[IM/DF/BSPCO/BSPHN/BADI]_<ffff>.
1. IM: Implementation Class;
DF: Definition Class
BSPCO: BSP Controller class
BSPHN: BSP Handler class
BADI : BADI implementation
2. Replace <ffff> with meaningful text: In case of Implementation classes, it should preferably be the same as that of the Definition Class
3. Example:
IMPLEMENTATION Class: ZCL_IM_REBATE_SETTL
DEFINITION: ZCL_DF_REBATE_SETTL
2.2.14 BOR Object Types
Object Convention Example
Supertype Z<ffff> ZLVAPPL
SubType Z<SuperType><nn> ZZLVAPPL01
Program <Subtype> ZZLVAPPL01
1. Replace <nn> with a running 2 digit serial Number
2. Replace <ffff> with meaningful text
2.2.15 Screen / Transaction Variants
Naming Convention: <tcode>_<ffff>
Where:
1. Replace <tcode> with the t-code that will be assigned to this Variant
2. Replace ffff with a meaningful text
E.g.:
For an SE16 variant for table KONA that will be used by T-Code Z_CH_SD_001:
Z_CH_SD_001_KONA
2.2.16 Area Menu
Naming Convention: Z<mm>_<Main Menu>_<Sub Menu> <ffff>
Where:
1. Replace <mm> with the Module code
2. Followed by the hierarchical position of the immediate parent of this Area Menu
3. Followed by a Meaningful text for this Menu
E.g.:
ZSD
ZSD_TAB
ZSD_TAB_VIEW
ZSD_TAB_UPDT
Notes:
1. Clusters of Transactions should be introduced as Sub-Menus rather than as Folders
2. As a gradual process, the current Clusters that exist as Folders should also be replaced with Sub-Menus
2.3 Naming of Sub-Objects
2.3.1 Program Sub-Objects
Naming of all the internal components of a program will be consistent across the project.
Naming Convention: <Prefix>ffff.
Notes:
1. Replace <Prefix> with the component prefix values given in the table below.
Program Component Prefixed by
Program Constants C_
Global Variables W_
Types Definition T_
Global Structures WA_
Global Internal Tables I_
Select-Options SO_
Parameters PO_
Table Type TT_
Field Symbols FS_
Ranges R_
Local Constants LC_
Local Variables L_
Local Static Variables LS_
Local Internal Tables LI_
Local Work Area LWA_
Local Range LR_
Field Groups FG_
Container CO_
Macro MA_
Important: The Same sequence as above must be followed in the Data declaration part of all the ABAP/4 programs.
2.3.2 SAP Script /Smartform sub-objects
Naming of all the internal components of a SAPScript/SmartForm shall follow the same convention as for Programs (2.2.2), with the addition of the Field Label on the FRS. E.g. if the FRS has labeled a field for Sales Order Number as Field 27 on the Layout, the variable name should be W_27_VBELN.
3. General Programming Guidelines
3.1 Modification Logs
At the top of every ABAP Object Modified by a Developer, there should be a Modification Log Every Line Created/Changed by the developer should be Identifiable by the TR Number.
ABAP Patterns: Following Patterns should be used for Uniform ModLogs:
Nature of Change Pattern to Use
New Development ZZNEWPROG
In-Line Logs ZZLINE
Modification Logs at the Top of Object ZZMODLOG
3.2 Program Organization
All the programs will be organized as described below.
3.2.1 Executable Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
3.2.2 Dialog Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
PBO Include: Include for PBO Modules
PAI Include: Include for PAI Modules
3.3 Package
All the related objects within a sub-module of SAP will be developed under a single Package.
3.3.1 Adding Components to existing objects
When adding new workbench components to existing Objects, the same Package will be used as has been used for the existing Components
3.3.2 Creation of New Objects
When creating new Objects or new Sub-lanscapes, Packages used should have the Naming convention as in Section 2 Above
3.4 Program Messages
All the messages within a sub-module of SAP will be grouped under a single Message Class.
3.4.1 Adding Messages to existing landscapes
When adding new messages for existing Objects, the same Message Class will be used as has been used for the existing Objects
3.4.2 Creation of New Objects
When creating new Objects or new Sub-landscapes, Message classes used should have the Naming convention as in Section 2 Above
3.5 Dictionary Objects
Whenever you create a Z table in system always include MANDT field as the first field, except when the table contains client independent data. Also create the table with attribute Data Class as USER.
4. Structure of ABAP Programs
4.1 Type
When an ABAP program is run, its processing blocks are called. ABAP programs are controlled from outside the program itself by the processors in the current work process. For the purposes of program flow, we can summarize the screen processor and ABAP processor into the ABAP runtime environment. The runtime environment controls screens and ABAP processing blocks. It contains a range of special control patterns that call screens and processing blocks in certain orders. These sections are also called processors. When a ABAP program is run, the control passes between various processors.
In the R/3 System, there are various types of ABAP program. The program type determines the basic technical attributes of the program, and must be set when created. The main difference between the different program types is the way in which the runtime environment calls its processing blocks.
When an application program is run, it must at least call the first processing block from outside the program, that is, from the runtime environment. This processing block can then either call further processing blocks or return control to the runtime environment. When an ABAP program is started, the runtime environment starts a processor (dependent on the program type), which calls the first ABAP processing block.
The following program types are relevant to application programming:
Type 1
Type 1 programs have the important characteristic that they do not have to be controlled using user-defined screens. Instead, they are controlled by the runtime environment, which calls a series of processing blocks (and selection screens and lists where necessary) in a fixed sequence. User actions on screens can then trigger further processing blocks.
Type M
The most important technical attribute of a type M program is that it can only be controlled using screen flow logic and run via a transaction code which is linked to the program and one of its screens (initial screen).
ABAP programs with type M contain the dialog modules belonging to the various screens. They are therefore known as module pools.
Type F
Type F programs are containers for function modules, and cannot be started using a transaction code or by entering their name directly.
Type F programs are known as function groups. Function modules may only be programmed in function groups. The Function Builder is a tool in the ABAP Workbench that is used to create function groups and function modules. Apart from function modules, function groups can contain global data declarations and subroutines. These are visible to all function modules in the group. They can also contain event blocks for screens in function modules.
Type K
Type K programs are containers for global classes in ABAP Objects. Type K programs are known as class definitions. The Class Builder is a tool in the ABAP Workbench that can be used to create class definitions.
Type J
Type J programs are containers for global interface in ABAP Objects. Type J programs are known as interface definitions and are created in the Class Builder.
Type I
Type I programs - called includes - are a means of dividing up program code into smaller, more manageable units. The coding of an include program can be inserted at any point in another ABAP program using the INCLUDE statement. There is no technical relationship between include programs and processing blocks. Includes are more suitable for logical programming units, such as data declarations, or sets of similar processing blocks. The ABAP Workbench has a mechanism for automatically dividing up module pools and function groups into include programs.
4.2 Status
P = SAP standard production program
K = Customer production program
S = System program
T = Test program
Application
Categorize the program according to the purpose it fulfills.
4.3 Authority Check
Authority checks will be carried out as given in the respective FRSs.
4.4 Program Structure
ABAP programs are responsible for data processing within the individual dialog steps (ie. events) of an application program. This means that the program cannot be constructed as a single sequential unit, but must be divided into sections that can be assigned to the individual dialog steps. To meet this requirement, ABAP programs should have a modular structure. Each module is called a processing block. A processing block consists of a set of ABAP statements. When a program is run, effectively a series of processing blocks is called. Therefore, they should not be nested but modularized.
Each ABAP program consists of the following two parts:
4.4.1 Declaration data for global data, classes and selection screens
The first part of an ABAP program is the declaration part for global data, classes, and selection screens. This consists of:
All declaration statements for global data. Global data is visible in all internal processing blocks and should be defined using declarative statements that appear before the first processing block, in dialog modules, or in event blocks. Local data should not be declared in dialog modules or event blocks.
All selection screen definitions.
All local class definitions (CLASS DEFINITION statement). Local classes are part of ABAP Objects, the object-oriented extension of ABAP.
Declaration statements which occur in procedures (methods, subroutines, function modules) form the declaration part for local data in those processing blocks. This data is only visible within the procedure in which it is declared.
4.4.2 Container for Processing Blocks
The second part of an ABAP program contains all of the processing blocks for the program. The following types of processing blocks are allowed:
1. Dialog modules (no local data area)
2. Event blocks (no local data area)
3. Procedures (methods, subroutines and function modules with their own local data area).
Whereas dialog modules and procedures are enclosed in the ABAP keywords which define them, event blocks are introduced with event keywords and concluded implicitly by the beginning of the next processing block.
All ABAP statements (except declarative statements in the declaration part of the program) are part of a processing block. Non-declarative ABAP statements, which occur between the declaration of global data and a processing block are automatically assigned to the START-OF-SELECTION processing block.
4.4.3 Calling Processing Blocks
Processing blocks can be called from either the ABAP program or using ABAP commands which are themselves part of a processing block. Dialog modules and event blocks are called from outside the ABAP program. Procedures are called using ABAP statements in ABAP programs.
Calling event blocks is different from calling other processing blocks for the following reasons:
An event block call is triggered by an event. User actions on selection screens and lists, and the runtime environment trigger events that can be processed in ABAP programs. Define event blocks for the events that the program needs to react to (whereas a subroutine call, for example, must have a corresponding subroutine). This ensures that while an ABAP program may react to a particular event, it is not forced to do so.
4.5 Screen Flow Logic (Dialog Programs)
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic.
Example:
PROCESS AFTER INPUT
MODULE EXIT_1170 AT EXIT-COMMAND.
MODULE PAINT_1170.
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction.
Example:
PROCESS AFTER INPUT.
MODULE EXIT_1170 AT EXIT-COMMAND.
CHAIN.
FIELD BTCH1170-JOBNAME.
FIELD BTCH1170-USERNAME.
FIELD BTCH1170-FROM_DATE.
FIELD BTCH1170-FROM_TIME.
MODULE PAINT_1170.
ENDCHAIN.
4.6 Main Program
4.6.1 Events
The Program MUST NOT be coded without the use of Proper Coding blocks
Initializations
Top-of-page during line-selection
At Selection-Screen
At Line-Selection
At User-Command
At Pfn
Start-Of-Selection
Top-Of-Page
Get
End-Of-Page
End-Of-Selection
NOTE: The coding for each event should be logically split into forms (subroutines). That is to say, each event will comprise mostly of PERFORM statements.
5. General Coding Standards
5.1 One command per line
Each ABAP/4 command consists of a sentence ending with a period. Multiple commands can be on one line; however, as a standard start each new command on a new line. This will allow for easier deleting, commenting, and debugging.
5.2 Indented Source Code
The ABAP/4 editor has a "Pretty Printer" command to indent by 2 positions specific lines of code and add subroutine comments. Event keywords are typically not indented.
5.3 Extended Syntax Check
Extended Program Check (EPC) to be done on each object to make sure the code is Syntactically correct. There should be no Error/warning messages in the code.
5.4 Reusability and Modularity
If a block of code is executed more than once, it should be placed in a subroutine at the bottom of the code. This makes the code more readable, requires less indentation, and is easier to debug since the debugger can jump through an entire subroutine via a PF key. Also, when possible parameters should be passed to and from subroutines to make the purpose easier to understand and reduce the need for global variables. Always document the purpose of each parameter.
5.5 Text Handling
Text elements must be used to display any text messages.
5.6 Usage of System Variables
The system variables should be used wherever possible. The SY-SUBRC is to be checked after any function call, selection operation, etc.
5.7 Chaining Statements
Consecutive sentences with an identical beginning shall be combined into a chained statement.
Example:
Instead of the statements
MOVE SY-MANDT TO D00001-MANDT.
MOVE SY-LANGU TO D00001-SPRAS.
A chained statement shall be used
MOVE:
SY-MANDT TO D00001-MANDT,
SY-LANGU TO D00001-SPRAS,
SY-UNAME TO D00001-BNAME.
5.8 Common Routines
Standard sub-routines should be implemented as FUNCTION's rather than a FORM (ie. SUBROUTINE). A FUNCTION is easier to maintain and can be easily tested without a calling program. Standard SAP function modules are also available and the function library should be used to check if function modules already exist for a function that needs to be performed i.e.POPUP_TO_CONFIRM_LOSS_OF_DATA etc.
Includes can also be created for re-usable or common code e.g. common data declaration statements.
5.9 Dialog Messages
Dialogue messages are stored in table T100. Programmers shall check to see if an appropriate message exists before adding a new message. Programs shall use the message-id which corresponds to the SAP module that the program most relates to.
5.10 Function Keys
PF-keys should be programmed to execute functions where required. SAP Standard function keys should be used where appropriate. The most commonly used buttons should be displayed as pushbuttons in the application toolbar.
5.11 Enqueuing and Dequeuing Data Objects
All database objects being processed by a program, for purposes other than for display, shall be enqueued before such processing is executed. If the enqueue is unsuccessful, then a message shall be returned stating why the enqueue was unsuccessful.
Enqueue and Dequeue objects should be created via the data dictionary.
5.12 Error Handling (SY-SUBRC)
Return codes shall always be checked immediately after an event which returns a code.
Eg. Function calls, Select statements, Updates etc.
The value of SY-SUBRC is 0 when successful and generally produces a value of 4 when unsuccessful (there are a few exceptions).
Therefore, rather check SY-SUBRC with:
IF SY-SUBRC <> 0
than with
IF SY-SUBRC = 4 (which is redundant and makes the system do a double check)
Error messages displayed to the user must be clear and descriptive.
Remember to group related / dependant steps together and to Rollback all changes for steps in that group should any one of them fail, thus maintaining the integrity of the system.
Check whether an Error Log, (file), must be produced by your program and if so check on the format of the file.
If any Error Logging is done to a custom table in the database then make sure this table is maintained and monitored correctly. (Dev. Note)
Transaction SE91 provides the facility to create and utilize messages in their appropriate message class. Elaborate on the message if necessary, using the long text documentation for that message number.
5.13 General Conventions and Hints
There should be NO hard coding of values in programs easy maintainability
For amounts, use the CURRENCY command in write statements to automatically convert fields into their correct decimal format. The currency specified in the write statement is treated as a key for the table TCURX. If no entry exists for the currency specified, the system assumes two decimal places.
For quantities, use the UNIT command in write statements to automatically convert fields into their correct decimal format. The contents of the unit specified are used on table T006. If no entry exists for the unit specified, the formatting has no effect.
Use the LIKE statement as often as possible to declare DATA variables instead of an explicit TYPE declarations.
Try to use the INCLUDE statement with standard SAP structures and tables for your structures and internal tables where possible. If you use the include statement to include other program components in your code then document what those components are, what they do and how to use them.
Try to make use of standard SAP Function Modules wherever possible rather than building your own. Use the pull down functionality in transaction SE37 to find suitable standard function modules.
Make use of the SAP PATTERN tool to automatically insert the standard code for:
CALL FUNCTION
MESSAGE ID
SELECT*FROM
PERFORM
AUTHORITY-CHECK
WRITE
CASE
CALL DIALOG
The standard date format to use is DD/MM/YYYY. (Dev. Note)
The standard time format to use is HH:MM:SS.
5.14 Parameters in Sub-Routines
Naming convention for Parameters in subroutine is P_
6. Performance Standards
6.1 General Tips on Performance Tuning
6.1.1 Avoid Redundant code
Avoid leaving "dead" code in the program. Comment out variables that are not referenced and code that is not executed. To analyze the program, use the Program Analysis function in SE38 -> Utilities -> Program Analysis.
6.1.2 Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called.
Example:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
6.1.3 Case vs. Nested IF
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
6.1.4 Using the MOVE Statement
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
6.1.5 SELECT Queries
The performance of any ABAP program mainly depends on the ABAP Queries used in it. More optimum the queries , better the performance. Take care of the points mentioned nin the following sections while writing any ABAP queries.
6.1.5.1 Using all the keys in SELECT statement
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. The SELECT * command is to be avoided everywhere.
6.1.5.2 Fetching Single Record
If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If all the keys are not available, we should use SELECT UPTO 1 ROWS if we are interested only in the first record.
6.1.5.3 Avoid SELECT-ENDSELECT
Selecting data into an internal table using an array fetch versus a SELECT-ENDELECT loop will give at least a 2x performance improvement. After the data has been put into the internal data, then row-level processing can be done.
Example:
select ... from table <..>
into <itab>
where ...
loop at <itab>
<do the row-level processing here>
endloop.
6.1.5.4 Using Indexs
Use indexes wherever possible. Tune the Query so that optimum Indexing will happen.
6.1.5.5 Provide all the keys
Give as many keys as possible in the WHERE clause to optimize the database fetching. Use the Index fields in the first position to optimize performance.
6.1.5.6 Avoid INTO CORRESPONDING
Avoid using INTO CORESPONDING FIELDS of Table. Instead, explicitly mention the fields. Else, The Table Fields should be in the same sequence as the selection
6.1.5.7 SELECT statement inside LOOP
Do not write SELECT statements inside the loop. Instead, use the FOR ALL ENTRIES Command
Before using FOR ALL ENTRIES command, check that the
1. Corresponding Internal table is not empty. If the Internal table is empty, the statement will select ALL the entries in the Database
2. The Internal table is sorted by the Filed used in the Where Clause: This makes selection faster
6.1.5.8 Nested SELECT statement
Avoid Using nested SELECT statements. Instead, make use of different internal tables to fetch the data, and Use Nested LOOPS to read them.
6.1.5.9 Select Distinct
Whenever its possible avoid SELECT DISTINCT, instead select data into internal table, sort and use DELETE ADJACENT DUPLICATES
6.1.5.10 Use of OR in Where Clause
Do not use OR when selecting data from DB table using an index because The optimizer generally stops if the WHERE condition contains an OR expression.
e.g.
Instead of
SELECT * FROM spfli WHERE carrid = LH
AND (cityfrom = FRANKFURT OR
city from = NEWYORK)
Use
SELECT * FROM spfli WHERE (carrid = LH AND cityfrom = FRANKFURT)
OR (carrid = LH AND cityfrom = NEWYORK).
6.1.5.11 Order By
ORDER BY will Bypass buffer. So, performance will decrease. If you want to sort data, it is efficient to SORT them in INTERNAL TABLE rather than using ORDER BY. Only use an ORDER BY in your SELECT if the order matches the index, which should be used.
6.1.6 Using the READ statement
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. The table needs to be sorted by the Key fields and the command READ TABLE WITH KEY BINARY SEARCH is to be used.
6.1.7 Hashed table
If the number of entries in the Internal Table is high then use Hashed Table with Keys to access the table.
6.1.8 Transporting
With READ or MODIFY Statements use TRANSPORTING
6.1.9 Using LDB
In order to improve performance in case of an LDB, individual tables can be excluded from selection. Under the section Table Selection in the Documentation of LDB the fields with proper description has been given those fields can be set in the application report at the time of INITIALIZATION or at the START OF SELECTION. This can enhance the performance.
6.1.10 Append Lines of
Whenever it is possible use APPEND LINES OF to append the internal Tables instead of using loop and then APPEND Statement.
6.1.11 Use WHILE
Use WHILE instead of a DO+EXIT-construction, as WHILE is easier to understand and faster to execute
6.1.12 DELETE <itab> WHERE
Use DELETE <itab> WHERE for deleting records from an internal table.
e.g.
Instead of
LOOP AT <itab> WHERE <field> = 0001
DELETE <itab>.
ENDLOOP.
Use
DELETE <itab> WHERE <field> = 0001.
6.1.13 Using WHERE clause in LOOP .ENDLOOP
Use:
Sort ITAB by NAME.
Loop at itab where name EQ SY-UNAME
Endloop.
Instead Of:
Read itab with key name = SY-UNAME.
L_tabix = sy-tabix.
Loop at itab from l_tabix.
If name eq bijoy
Endif.
Endloop. -
Question on security in ABAP program with ITS. Please help!
Hi Experts,
I have a question on security in ABAP program.
I have a ABAP program which has a transaction attached.
I have added authorization check in ABAP program(Progran level security).
I have also attached the authorization object to the transaction.(Transaction level security)
If an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
If I have web enabled my ABAP program via SICF (in other words, ITS). Then when I try to run my ITS service in the browser will the transaction level authorization fire? or Will the program level authorization fire?
Please help me understand this security aspect.
Thanks
Gopal<i>I have added authorization check in ABAP program(Progran level security).</i>
i assume you have coded call authority within the program.
<i>If an end user runs the transactionm, then which authorization check will fire first?</i>
if he calls the transaction, then first authorization attached to the transaction will be checked.
but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
<i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
it depends,
if you are calling your transaction like
webgui/?~transaction=<tcode> then first tcode level authorization.
if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
Regards
Raja -
Hello All,
I am very new to ABAP programming and i want to learn ABAP. For this i am using following link
http://help.sap.com/saphelp_470/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe/frameset.htm
But this document does not contains any walkthroughs or How to Section, so that beginner can start programming.
Do you have any such material related to only programming steps.
Thanks in advance,
PrashantPls follow the below link:
http://www.itcserver.com/blog/2006/06/24/the-structure-of-an-abap-program/
http://help.sap.com/saphelp_470/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe
Please check also the foll links to start learning ABAP.
http://help.sap.com/
http://www.sapgenie.com/abap/
http://www.sappoint.com/abap.html
http://cma.zdnet.com/book/abap/index.htm
http://www.sap-img.com
http://www.sappoint.com
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://sap.ittoolbox.com
Please visit this link. I hope this will help you a lot.
LINK : http://sapabap.iespana.es/sapabap/manuales/learnabap/
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/abap
Pls reward appropriate points. -
Need one abap program.....pls help
Hi all,
i have need one ABAP program , which can dispaly how many same number of charecter are there.
ex : my input is suresh.
output is,,,
2 - s
1 - u
1 - r
just like that..
pls help me..
thanks in advance.
induHello
Try this:
data: string(100),
length type i.
data: begin of itab occurs 0,
chart,
count type i,
end of itab.
string = 'suresh'.
length = strlen( string ).
do length times.
length = length - 1.
clear itab.
itab-chart = string+length(1).
itab-count = 1.
collect itab.
enddo.
loop at itab.
write: itab-chart, itab-count. new-line.
endloop. -
How to get a parameter from BPC and use it in ABAP program
Hello gurus!
I got a problem...
SAP BPC will send parameters such as year, division, category, company code and so on via script logic to SAP BW.
I need to get these parameters from BPC and use them in a ABAP program as a filter.
This ABAP program will do several routines and return new values to BPC. It must be made on ABAP and I need to filter data to avoid performance issues.
Does anybody knows how to do it? or have a example of it?
Thank you in advance.
Regards,
Rubens KumoriHello, I'm looking for a suggest.
I need to pass two parameters (users can input them in a data manager package in bpc) to a BAdI.
In this BAdI I write a code that store those parameters in a InfoObject.
The problem is:
- one parameter is for CATEGORY value. CATEGORY is a dimension of the application and I read the value with a code like this:
READ TABLE it_cv INTO l_s_it_cv
WITH TABLE KEY dim_upper_case = 'C_CATEGORY'.
- other parameter is a generic DATE. this parameter is not a dimension of the application and I don't know how I can retrieve this value in BAdI.
READ TABLE it_cv INTO l_s_it_cv
WITH TABLE KEY dim_upper_case = '.....'.
The data manager dynamic script is:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%")
PROMPT(TEXT,%SELECTED_DAY%,"Write the date (format YYYYMMDD)",)
I also have a dynamic constant that assign the name %CATEGORY_DIM% to "C_CATEGORY" value.
Can anyone help me?
thanks a lot
Edited by: Luca Novali on Feb 13, 2012 3:49 PM -
Triggering Event in BW through a ABAP Program in R/3
Hello Friends,
I am working on triggering a process chain in BW using ABAP program in R/3.
1. I have created a test process-chain in BW which sends test email upon running. This process chain is triggered by an event "Z_START_PC".
2. I created a function module "ZBW_EVENT_RAISE" which triggers this event.
( This function module is "remote enabled module")
3. I tested running the process chain, with function-module (SE37), which works fine.
( i.e. I do receive test-email after..)
4. Now I created a ABAP program "ZBW_EVENT_RAISE" in R/3.
The code of which is as follows:
REPORT ZBW_EVENT_RAISE.
parameters: rfcdest like t000-logsys.
parameters: bwevent like tbtco-eventid.
call function 'ZBW_EVENT_RAISE'
destination rfcdest
exporting
eventid = bwevent.
5. When I try to run this ABAP program in R/3 (SE38),
The process chain does not get triggered.
(a) The "<b>rfcdest</b>" i got from SM59 - RFC Destinations -
R/3 Connections - BW Development Server Client
Value is "BWDCLNT999".
How do I go about debugging this issue? I know for sure, the BW- function module -- to Trigger -- to Process-chain is working fine. Only part is R/3 to B/W function module starting.
Any help is appreciated.
I promise to award points.
Thanks
PKin ST05 there is an option for RFC trace. Not sure how much detail that will give you but you can try.
It is possible that your userid doesn't have an RFC call authorization in R/3. Do a SU53 immediately after running the program.
Also, replace the FM with any other FM that you know for sure runs (eg some BAPI FM) and run it - either in SE37 in R/3 with RFC destination for BW, or, from your code itself and see if that works (you can check return code). -
How can i print data in smartforms from ABAP program.
Dear gurus:
in my abap program i process require data, and saved in a internal table.
how can l print the data in smartforms.?
who can give me a code sample is better:)
reward all helpful advise.Try this....
1) Tcode --> SmartForms
2) Form name --> Z_SF_TEST Create
3) Under Global settings
a) Form Interface
Table Tab
ITAB LIKE EKPO
b) GLOBAL Definitions
WA_NETPR LIKE EKPO-NETPR
In smart forms if we want to display quantity and currency fields. We can't directly display currency field and quantity fields
For that we have to create an extra variable in global definitions
Ex: netpr FIELD of EKPO
CREATE program lines and specify WA_NETWR = itab-netpr.
4) RT CLick on main Window
CREATE --> TABLE
Click Table painter
DEFAULT %LTYPE will be Created
a) If you want more like Header footer etc add by rt click on %LTYPE1
Table (Tab)
%LTYPE Radio(SELECT) 5 CM 5 CM 6 CM
CLICK on DATA (Tab)
INTERNAL TABLE ITAB LIKE ITAB
5)RT click on table control and create --> program lines
General attribute (Tab)
INPUT PARAMETER OUTPUT PARAMETER
itab WA_NETPR
Code Area
WA_NETWR = ITAB-NETPR.
6) RT CLcick on table ctl and create 3 text to display the fields
a) % text1 +button(insert field)
FIELD name &itab-ebeln&
Output options (tab)
Check New line LINETYPE %Ltype1
check new cell
b) % text2
& itab-ebelp&
output options
check new cell
c) % text2
& wa_netpr&
output options
check new cell
<b>Report ac
Tables ekpo.
Data: itab1 like ekpo occurs 0 with header line.
select * into table itab1 from ekpo.
Call function module --> smart form function module and pass your internal table</b>
Regards,
SaiRam -
How to create the condition record by ABAP program
Hi Friends,
I want to create/change the condition record of PR00 by ABAP program. It seems that there have no such BAPI/standard function can help on this. Can any one of you point out a way to me?? Thanks in addvance.
Joe GR.Joe,
Check with below FM..
BAPI_PRICES_CONDITIONS.
Check this link:
Re: Sample code for BAPI_PRICES_CONDITIONS
examples....
http://www.4ap.de/abap/bapi_prices_conditions.php
Two useful threads on Same topic
Re: Sample code for BAPI_PRICES_CONDITIONS
Re: Problem with BAPI_PRICES_CONDITIONS
BAPI_PRICES_CONDITIONS
Please check this sample code from other thread.
wtable1-table_no = '306'.
wtable1-applicatio = 'V'.
wtable1-cond_type = 'ZPR0'.
wtable1-operation = '009'.
wtable1-varkey = '13001001USD 000000000050068946'.
wtable1-valid_to = '99991231'.
wtable1-valid_from = '20051101'.
wtable1-cond_no = '$000000001'.
APPEND wtable1 TO table1.
wtable2-operation = '009'.
wtable2-cond_no = '$000000001'.
wtable2-created_by = sy-uname.
wtable2-creat_date = '20051022'.
wtable2-cond_usage = 'A'.
wtable2-table_no = '110'.
wtable2-applicatio = 'V'.
wtable2-cond_type = 'ZPR0'.
wtable2-varkey = '13001001USD 000000000050068946'.
wtable2-valid_from = '20051101'.
wtable2-valid_to = '99991231'.
APPEND wtable2 TO table2.
wtable3-operation = '009'.
wtable3-cond_no = '$000000001'.
wtable3-cond_count = '01'.
wtable3-applicatio = 'V'.
wtable3-cond_type = 'ZPR0'.
wtable3-scaletype = 'A'.
wtable3-scalebasin = 'C'.
wtable3-scale_qty = '1'.
wtable3-cond_p_unt = '1'.
wtable3-cond_unit = 'EA'.
wtable3-calctypcon = 'C'.
wtable3-cond_value = '454'.
wtable3-condcurr = 'USD'.
APPEND wtable3 TO table3.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_initialmode = 'X'
PI_BLOCKNUMBER =
TABLES
ti_bapicondct = table1
ti_bapicondhd = table2
ti_bapicondit = table3
ti_bapicondqs = table4
ti_bapicondvs = table5
to_bapiret2 = table6
to_bapiknumhs = table7
to_mem_initial = table8
EXCEPTIONS
update_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE table6 WITH KEY type = 'E' TRANSPORTING NO FIELDS.
IF sy-subrc = 0.
loop at table6 into ret.
write: / ret-type, ret-message, ret-id, RET-LOG_NO, RET-LOG_MSG_NO,
RET-MESSAGE_V1, RET-MESSAGE_V2, RET-MESSAGE_V3, RET-MESSAGE_V4,
RET-PARAMETER,RET-ROW,RET-FIELD.
endloop.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*EXPORTING
WAIT =
IMPORTING
return = ret
ENDIF.
Don't forget to reward if useful.... -
How can I trigger an event from an ABAP Program
Hi everyone,
I have a requirement, where I have to create an ABAP program, that has to execute (trigger) an event which belongs to a Process Chain. when I run the program, the Process Chain has to run.
So, how can I do it?
Thanks for your help, FedericoHI ,
The program can call function module BP_EVENT_RAISE to raise the event. you can create vent in sm64 and sm62 .There you give the parameter of the event same as what you will define in the event of start variant of your process chian ..
Regards,
shikha -
How to call a BW Query from an ABAP program?
How to call a BW Query from an ABAP program?
hi
check this link
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-i
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
hope this helps
cheers -
Getting Data from Maintenance view V001N into ABAP program
Hello Experts,
I have to fetch data from the maintenance view V001N in my ABAP program. I have used select statement in my program but I am getting a syntax error 'V001N is not defined in the ABAP Dictionary as a table, projection view or database view. '. V001N is a Maintenance view.
Can anybody help me out how to get the data from that maintenance view into the internal table of my ABAP program.
Regards.Sunil,
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=18906946&messageID=6074746
https://forums.sdn.sap.com/click.jspa?searchID=18906946&messageID=6088233
so query on the tables which are used in the view
Thanks
Bala Duvvuri -
Error in executing ABAP program. Error occurred when creating dataset
hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for helpr u able to figure it out..........i got the same error .......can someone help me fix this issue
-
Error when Consuming a WS from an ABAP program
Hello,
I am getting an error when I try to consume a WS from my ABAP program. The error states ' Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/' and the code is SOAP: 14
This should be a simple call to a WS from BOBJ. I have searched OSS and SDN and I can't find any help. We are using 7.01 SP3
Actually I watched the blog by Thomas Jung to get me started and thing went well except forthe part where I was supposed to create the logical port via SOAMANAGER. I got this error 'Error: Initial value "context operation table" in methodDELETE_INVALID_INTERFACE_NODES of class CL_SRT_WSP_CONFIG_SIDL' so I used LPCONFIG instead and them SM59.
Has anyone encountered something like this?
Thanks!
RichOk so I got the bright idea of putting an external breakpoint in the DELETE_INVALID_INTERFACE_NODES method of class CL_SRT_WSP_CONFIG_SIDL and interestingly I think I am on to something. The code that is throwing an expection is srt_wsp_error_is_initial lt_operations[] 'context operation table'. "#EC NOTEXT at approximentally line 89.
So I am doing my amateur sleuthing in the debugger and it leads me to the WSDL and what looks like a missing operation for a port type. I say this b/c all the port type /port type tags have operation/operation tags embedded within them. simliar to this
<portType name="Real-time_Services" />
- <portType name="Batch_Jobs">
- <operation name="Oracle">
<input message="tns:Oracle_Input" />
<output message="tns:Oracle_Output" />
</operation>
</portType>
- <portType name="Realtime_Service_Admin">
- <operation name="Get_RTService_List">
<input message="tns:Get_RTService_List_Input" />
<output message="tns:Get_RTService_List_Output" />
</operation>
- <operation name="Run_Realtime_Service">
<input message="tns:Run_Realtime_Service_Input" />
<output message="tns:Run_Realtime_Service_Output" />
</operation>
- <operation name="Get_RTMsg_Format">
<input message="tns:Get_RTMsg_Format_Input" />
<output message="tns:Get_RTMsg_Format_Output" />
</operation>
</portType>
Note the first port type = Real-time_services doesn't have an end port tag and in the debugger my ABAP is shortdumping when trying to proess this port type
I think I found my error. Can anyone who has seen this before verify this for me before I give the WSDL creator heck
Thanks
Rich -
How to find the Web AS Port from ABAP program
Hi
I have an ABAP program which passes an URL for a BSP page to the Alert Framework. While creating the URL I need to find out the Hostname and port number for the Web service for that server. Hostname comes from sy-host but I am not able to find the port number.
Please help...
Thanks in advanceHi,
consider this little code snippet:
data: l_urls type tihttpurls2.
call method cl_http_server=>get_extension_info
EXPORTING
extension_class = 'cl_http_ext_bsp'
IMPORTING
urls = l_urls.
l_urls contains a table of configured ports. maybe that helps.
regards, Ulli
Maybe you are looking for
-
How do I Edit an Existing PDF Form Without Losing Form Functionality
I'm brand new to Acrobat but familiar and proficient with Flash, PhotoShop Premiere Pro, After Effects, Dreamweaver, Fireworks etc. The company I work for sells office supplies. We sell 57 distinct items. We have Acrobat 9. I am designing a PDF ord
-
Invoice: Baseline date on the payment terms.
Dear Experts, I am having a problem where trying to change the term of payment of an invoice before a posting, the account doesnt set the baseline date correctly. This issue occurs for baseline date type 'Entry Date' . After whichever interaction in
-
Error in Export Layers to Files (PSCS 5)
When I try Scripts-export layers to files in PS CS5, I get the message "Error 519: Server Interface error (No component returned from CreateWidget- line 250)". This script used to work well. Anybody any idea what to do, cause I ain't got a clue (-:).
-
Replace the component after batch determination in the process order.
Hi dudes, How we can replace component for which batch determination done with a new component in a process order. can any body suggest if its possible. thanks in advance. Robert
-
Z30 - Music & Neutron App do not see music files in micro SDXC card now and then
I have my Z30 about a week now. So far so good. This morning, all of a sudden the native Music & Neutron App do not see the music files on the 64 GB micro SDXC card. The files are there when I checked with file management. I restarted a few times and