Help In Business Intelligence
Hi Gurus
How to call pivot table data in ticker in Business Intelligence?
When i tried using ticker it is getting table data
Thanks in Advance
with the @1 and @2 you would only get the values, what you could do is create a separate report with the necessary calculations and then try to use that as a source in the ticker, because if you have performed any calculations in the Pivot table it would be dynamic and it would be hard for you to get those values to be displayed in the ticker. I suggest you create a seperate report or add the calulation in the business layer (if its feasible) and then use it in the table . Then it would be easier to be used in the ticker.
Thanks.
Similar Messages
-
Need help in Customization in Oracle Business Intelligence.
Hi Guru,
I am working on ODI to customize Oracle Business Intelligence ( Category 1 and Category 2 Customization ). I need comprehensive / detail documentation on "OBI Customization" and "RPD Modification" . Kindly help and advice.
I use OBIEE 11.1.1.7.1 and ODI 11.1.1.7.0.
ThanksHello Arshad,
Thanks for signing you post. It would be easier if you changed your forum handle to your name for communication purposes.
So I did understand you correctly Ijust wasn't aware that Oracle still uses this somewhat arbitrary wording. Anyways as I said you're looking for a How-To on customizing Oracle BI Applications which means learning how to work with OBIEE and how to work with ODI.
To have and read the documentation isn't bad - the new one is here by the way: Oracle Business Intelligence Enterprise Edition Documentation - but places like the Learning Library I posted are a good place as well since your questions are potentially very vast.
In general for what you call Cat1 changes it's all about
- finding the source of your new column in a source system or calculating it in the ELT if it is a derived column
- adding it to your physical schema of the target database
- adjusting your ELT processes to fill it
- import the new column into the RPD physical layer or create it manually
- map it to a new logical column in a logical table in the business model
- expose it in the presentation layer
Cat2 is more of the same but you also need to integrate it into your physical model (both actual physical model in the database and the physical model metadata of the RPD) in terms of joins etc and your ELT-work becomes a lot more extensive (table construction, key resolution, SCDing, partitioning, indexing,..........).
As you can see there's a lot of things to cover so we can't just "give you an answer". You're basically touching topics which take time to learn and assimilate and to just jump in and start doing isn't necesssarily somehting I'd suggest. Best take a training course on OBIA since otherwise you may implicitely "just do" things because you were told so in here or by someone and you'll never see and be able to comprehend the underlying concepts and techniques. -
Oracle Daily Business Intelligence Help
Friends...I need some help..in "Oracle Daily Business Intelligence". Please suggest me some exercises to create a KPI using Daily Business Intelligence if you know.Your help is highly appreciated.
Thanks in advance
Ravindra ThotaHi
Please refer Metalink Note: 364452.1 for KPI Report Design.
For creating KPI you should add 'Daily Business Intelligence Designer' Responsibility.
Additional information:
DBI Cookbook Master List and Flows (Metalink Note: 363948.1)
Publish Dashboards and Reports (Metalink Note: 363530.1)
Implementation Guide (Metalink Note: 246548.1)
Implementation Guide Supplement (Metalink Note: 352804.1)
User Guide (Metalink Note: 246547.1)
Thanks & Regards
Jaggi Reddy -
Help to write the sql server 2012(business intelligence ) certification.
Hi,
I am planning to write the SQL SERVER 2012 certification exam.
i want few more details...
1. Examination code.
2. how to prepare
3. is there any dumps available.
4. is there any books available for preparation.
Please pass the details, it would be very help full for me..The Business Intelligence exams are:
70-461: Querying Microsoft SQL Server 2012
70-462: Administering Microsoft SQL Server 2012 Databases
70-463: Implementing a Data Warehouse with Microsoft SQL Server 2012
70-466: Implementing Data Models and Reports with Microsoft SQL Server 2012
70-467: Designing Business Intelligence Solutions with Microsoft SQL Server 2012
Ramesh Babu Vavilla MCTS,MSBI -
Business Intelligence Tools Connection help
Hi Guru, sorry i am quite new to Business Intelligence.. and i have go through some ebook on Business Intelligence found on SDN..
wonder could anyone tell me more on how to use those tools i know about
<b>BExAnalyzer
BExWebApplicationDesigner
BExQueryDesignerStarter
BExReportDesignerStarter</b>
for me i try to open the application it promt me to login to the server. but currently i using <b>Trial Slim Edition</b> and wonder could anyone teach me or guide me in how to create the connection.. so i can start to explore the BI...
thank..
hope to hear from you all soon...
Regards
Jia JunHi,
Here's the link to download Discoverer
http://www.oracle.com/technology/software/products/discoverer/index.html
In this, there are 3 types of download available :
--Oracle Discoverer Standalone downloads ,
--Oracle Application Server, Discoverer Downloads ,
--Oracle Developer Suite, Discoverer Administration Edition Downloads -
Business Intelligence (BI) Training for SharePoint 2013
Hello everyone -
I'm looking for an intermediate level Microsoft BI (SharePoint 2013 based) preferably in Toronto and conducted by a MVP.
Anyone can recommend any such course? I might consider taking an online course if there is really good one out there
in other regions. :-)
I've shortlisted few...need to take this course by the end of November 2014. Anyone has any experience/ comments about these?
http://www.learningtree.ca/courses/146/microsoft-tools-for-business... by andrew
jablonski
Microsoft: WorkshopPlus - SharePoint 2013 Business Intelligence
http://www.lastminutetraining.ca/course/11078/SharePoint-2013-Busin...
http://www.quickstart.com/courses/SharePoint-2013-Business-Intellig...
Thank you in advance!
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
"Mark As Answer"Hi,
For your issue, you can consider the
Course 55042A :SharePoint 2013 Business Intelligence and
Course 55049A:PowerPivot, Power View and SharePoint 2013 Business Intelligence Center for Analysts .
Also please check for the following videos:
http://channel9.msdn.com/posts/SharePoint-2013-BI
http://channel9.msdn.com/Events/Microsoft-Campus-Days/Microsoft-Campus-Days-2012/Business-Intelligence-in-SharePoint-2013
http://www.youtube.com/watch?v=PQoK5qEkKNI
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
How to create a Real Time Interactive Business Intelligence Solution in SharePoint 2013
Hi Experts,
I was recently given the below requirements to architect/implement a business intelligence solution that deals with instant/real data modifications in data sources. After going through many articles, e-books, expert blogs, I am still unable to piece the
right information to design an effective solution to my problem. Also, client is ready to invest in the best
infrastructure in order to achieve all the below requirements but yet it seems like a sword of Damocles that hangs around my neck in every direction I go.
Requirements
1) Reports must be created against many-to-many table relationships and against multiple data sources(SP Lists, SQL Server Custom Databases, External Databases).
2) The Report and Dashboard pages should refresh/reflect with real time data immediately as and when changes are made to the data sources.
3) The Reports should be cross-browser compatible(must work in google chrome, safari, firefox and IE), cross-platform(MAC, Android, Linux, Windows) and cross-device compatible(Tabs, Laptops &
Mobiles).
4) Client is Branding/UI conscious and wants the reports to look animated and pixel perfect similar to what's possible to create today in Excel 2013.
5) The reports must be interactive, parameterized, slice able, must load fast and have the ability to drill down or expand.
6) Client wants to leverage the Web Content Management, Document Management, Workflow abilities & other features of SharePoint with key focus being on the reporting solution.
7) Client wants the reports to be scalable, durable, secure and other standard needs.
Is SharePoint 2013 Business Intelligence a good candidate? I see the below limitations with the Product to achieve all the above requirements.
a) Cannot use Power Pivot with Excel deployed to SharePoint as the minimum granularity of refresh schedule is Daily. This violates Requirement 1.
b) Excel Services, Performance Point or Power View works as in-memory representation mode. This violates Requirement 1 and 2.
b) SSRS does not render the reports as stated above in requirement 3 and 4. The report rendering on the page is very slow for sample data itself. This violates Requirement 6 and 7.
Has someone been able to achieve all of the above requirements using SharePoint 2013 platform or any other platform. Please let me know the best possible solution. If possible, redirect me to whitepapers, articles, material that will help me design a effective
solution. Eagerly looking forward to hear from you experts!.
Please feel free to write in case you have any comments/clarifications.
Thanks,
BhargavHi Experts,
Request your valuable inputs and support on achieving the above requirements.
Looking forward for your responses.
Thanks,
Bhargav -
While back up and restoring the business intelligence site collection in sharepoint 2010
Hi,
i am trying to take backup of business intelligence site collection from one sharepoint server and restoring it to the 2nd sharepoint server,backup and restore successfully completed.i have configured all the performance point services on new server also.
but still i am getting below error:-
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: The filter no longer exists or you do not have permission
to view it. PerformancePoint Services error code 20700.
Can anybody suggest me how to resolve these error.
And the dashboard is looking like below:-Hey Surbi
I'm facing the same issue, actually restored a backup of the BI site collection into a different web app (on the same server) but get the same errors as you!
Looking into it the connection to the report or filter (whatever artefact it is) needs to be refreshed so technically the report doesn't exist as far as the performance web part is concerned!
However when I re-attached the web part to the filter or report I got a different error... 'This data source no longer exists'
So basically I found I had to re-create the reports and filters etc in Dashboard Designer... to re-create the dashboards. I did one page and don't want to spend months re-doing them!
Anyone come up with a way of preserving the web parts references to performance point items and the items connections to their data source in a restore of a site collection? -
Use coherence in Business Intelligence area
Hello, Everyone,
I am just wondering that is it possible to use coherence in business intelligence area? Does anyone has such experience?
As we know, building BI application is quite different from the online trading applications.
If we try to use database to fulfill a BI application, every SQL statement would process tons of data .
Maybe we should wait hours or days for one result sometime.
Therefore, I am thinking of the coherence. How could this platform help us? If we seperate data on different grid nodes and process on different nodes, that would be faster than pure database environment.
However, there are two significant problems that I could not avoid.
First, how to seperate data? if it beame a very complicated work, I think database would be better. At least, database provides one node partition mechanisms.
Second, how about the performance of QueryMap? Unfortunately, I did some test on QueryMap, the performance of QueryMap is quite worse than Oracle database.
Please give me some suggestions.
Best regards
Copper shenHi Moshin,
You have to learn SAP BW 3.5 along with ABAP and BI 7.0. Because BW 3.5 is the earlier version of BI 7.0.
BO is widely used for Reporting which can work on any database.
It's better to join in SAP Authorized Institutes like the following. It may be expensive.
1. Siemens
2. Yash
Etc..........
Regards,
Suman -
Difference between oracle business intelligence and discoverer.
hi all.
can anyone help me that what is the difference between oracle business intelligence and discoverer.
any suggestion?
sarahNot sure if this is the right place to ask this, but
http://www.oracle.com/technology/products/bi/enterprise-edition.html
http://www.oracle.com/technology/products/discoverer/index.html
also google gives some pretty good responses if you throw in "Oracle Discoverer" or "Oracle Business Intelligence" :o).
if you have specific questions you might pick up a forum dedicated to the specific product from here:
http://forums.oracle.com/forums/category.jspa?categoryID=16
cheers -
Oracle Business Intelligence Installation failing at Creating ASInstance
Hello All,
I'm trying to Install Oracle Business Intelligence Enterprise Edition 11.5 on Centos 6.3 x64 and it is failing at Creating ASInstance.
Below is some part of the logfile that I believe is the cause of the failure. Please help.
oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 19 more
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Assigning Port: 9503 to: OPMN_LOCAL_PORT
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Assigning Port: 9504 to: OPMN_REMOTE_PORT
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Assigning Port: 9505 to: OPMN_REQUEST_PORT
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Setting valueOf(OPMN_LOCAL_PORT) to:<SECURE>. Value obtained from:USER
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Setting valueOf(OPMN_REMOTE_PORT) to:<SECURE>. Value obtained from:USER
[2012-10-27T01:33:23.682+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Setting valueOf(OPMN_REQUEST_PORT) to:<SECURE>. Value obtained from:USER
[2012-10-27T01:33:23.704+03:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Executing a Jaxb workflow ...
[2012-10-27T01:33:23.705+03:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 37] [ecid: 0000JeVB84zFw000jzwkno1GYk7X00000S,0] Begining Oracle Fusion Middleware
Kind Regards,
Denis OjokHi Denis,
Check these docs
Installing OBIEE 11g On Linux 64-bit Fails Running The Configuration Assistant With "Step Creating Asinstance Failed" [ID 1304640.1]
Error: "Oracle.as.provisioning.util.ConfigException: Error While Starting the Domain." Whilst Installing OBIEE 11G [ID 1272906.1]
-->Try with static IP or loopback adapter.
Obiee 11g Install Fails During Config - Java Out Of Memory Errors In Logs, PermGen [ID 1278708.1] and [ID 1211573.1]
If helps pls mark -
Setup steps to enable procurment dailly business intelligence?
Hello,
Can any one help me to get setups to enable requisition, purchase order and inventory data in dailly business intelligence.
I am not getting the steps after reading implementation and user guides, please do help me.Hai i am sequencing SQL server 2008 R2 . just want to know from where can i get this hot fix download. there is only option saying contact microsoft . but where we are able to download this hotfix to Fix the issue of licience..Help out
-
Business Intelligence, oc4j url error in CentOS 5
Hi ALL,
I have installed oracle business intelligence successfully in centos 5.
i started the BI process and after that
i started the ./oc4j -start and i think it started successfully
i got something like this as at the end after executing ./oc4j -start
- Job execution threads will use class loader of thread: OC4J Launcher
- Quartz Scheduler v.1.5.1 created.
- RAMJobStore initialized.
- Quartz scheduler 'DefaultQuartzScheduler' initialized from default resource file in Quartz package: 'quartz.properties'
- Quartz scheduler version: 1.5.1
- Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started.
08/03/19 18:07:01 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized.........
now when in typed
http://172.22.37.253:9704/analytics in my internet explorer i get the bellow error,will any please help me out to solve this issue, we have installed same in windows,it is working excellent but in linux i am getting below error...please some one tell me how to solve the issue
500 Internal Server Error
java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.<init>(Socket.java:366) at java.net.Socket.<init>(Socket.java:180) at com.siebel.analytics.web.sawconnect.ConnectionPoolSocketFactoryImpl.createSocket(ConnectionPoolSocketFactoryImpl.java:63) at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.siebel.analytics.web.sawconnect.ConnectionPoolSocketFactoryImpl.createSocket(ConnectionPoolSocketFactoryImpl.java:70) at com.siebel.analytics.web.sawconnect.ConnectionPool.createNewConnection(ConnectionPool.java:314) at com.siebel.analytics.web.sawconnect.ConnectionPool.getConnection(ConnectionPool.java:133) at com.siebel.analytics.web.SAWBridge.processRequest(SAWBridge.java:297) at com.siebel.analytics.web.SAWBridge.doGet(SAWBridge.java:323) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:619)
Thanks and Regards
Veeresh Splease anyone will tell me what may be the problem and what i should do to solve this problem
-
[ASK] about Oracle Business Intelligence
Hi All,
any body can help me?
i want learn about Business Intelligence, but i not undestand what should i do.
can any body explain / suggest to me, what must i install any software on my computer to develop BI.
please give me the url to download or ebook to guide me.
FYI
i have installed Oracle Business Enterprise 11g. i downloaded it from oracle site.
Thanks your help guys...Hi,
11g software can be downloaded form here,
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
You have plenty of kick start materials here,
http://gerardnico.com/wiki/dat/obiee/getting_started
Rgds,
Dpka -
Daily Business Intelligence Designer
hi i want to make a report in DBI Designer
all is welll but the issue is how i create a PRIOR PARAMETER in DBI and AS OF DATE PARAMETER..
please guide meWhat is the application release?
Please see if these docs/links help.
Oracle Daily Business Intelligence Implementation Guide
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120dbiig.zip
Oracle Daily Business Intelligence User Guide
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120dbiug.zip
How to Create an Automatically Generated (AG) Source Report in DBI Designer [ID 363529.1]
Publish DBI Content Cookbook [ID 363530.1]
How Does As Of Date Parameter Find Opportunities By Period In Sales DBI? [ID 989094.1]
Thanks,
Hussein
Maybe you are looking for
-
Explain plan result for a long-running query used in data-warehousing. Tuni
I have executed an explain plan for a query that is used in a data-warehousing application. This sql is taking too long to execute as it is visiting 24 partitions. Where each partition contains data for 1 month month, so it fetches last 2 year data.
-
Hi, we have an issue where date is not displaying correctly in report. it shows 1/1/1990. even in universe it shows the same value 1/1/1990. but if i run query at DB level it shows the correct date. Reporting Database is Sybase. we are on Bi 4.0 SP 6
-
Transaction on Oracle 9i data source connection times out before JTA transaction
Hello, I have a MDB with a long-running transaction (3600 second timeout). In the MDB, I make a call to another EJB that has its transaction attribute set to NotSupported (I do this because I need non-transactional semantics in the called method). If
-
Hello I am getting loads of errors displayed in Event Viewer Application log like:- Event ID 1035 A error occurred in connecting to the <xxx.xxxxxx.co.uk> POP3 server for user <[email protected]>. The error is 11004. The server may be down for maint
-
Adding a field to AD form in OIM 11gR2
Hello, I'm trying to add a field to the AD resource form in order to provision data that is not handled by default by the connector (the scriptPath field). I've followed the instructions in the connector documentation that explain how to add a field