Help in collecting objects for transport into Q

Hi All,
We have our Q environment ready and need to transport the data flows into Q. I know that we have to replicate the datasources in Q before doing any transports. I have a flow like below:
R/3 -> ODS -> Cube. I have generated an export datasource on the ODS and created a datamrt infopackage to load from ODS to Cube. What is the correct way to collect them in transports. I read(in some of the earlier posts) that we need to transport the export datasource before transporting the Cube.
Please suggest!!!
Thanks,
RPK.

Hi,
If you are using Version 7 , no need to worry about it. We can combine both ODS and CUBE with Dataflow before and after in a transport requet.
But If I remember correctly, I had a datasource unavailability problem with both ODS and CUBE with Dataflow before and after in a transport requet in older versions.
So, in older versions, Take ODS with DFBefore in a request , trnasport and import it first, Then Replicate teh data sources from teh context menu of self source system. And then take Cube in another request with DFB and DFAfter .Import it later.
With rgds,
Anil Kumar Sharma .P

Similar Messages

No object can select when collecting objects for transport

Hi.Experts:
When I use RSA1 and want to collect objects for transport,I found that no objects can be found for some object type,such as ISTD/TRFN etc, any body who know this situation?
Best Regards
Martin Xie

Hi Martin,
best way to collect objects into transport request is throught RSA1 -> Transport connection.
in Transport connection, you have different options to collect objects into transport request.
In data flow before...
here you can see objects that are already have transport request, package...
Regards
Daya Sagar

Sequence of collecting objects for transport in BI

I am making a display attribute to navigational attribute, kindly let me know the sequence of collecting objects for transport request.
i need to check in infocube as well in multi provider.
please let me know
thanks,
Venkat

Hi,
Make sure the Infoobjects(in which you are changing it from Display attirube to Nav attribute) and collect the other things in a seperate request (Infoproviders, the deativated transformations and the DTP followed by Queries). Release the request to QA/Prd in a sequence(Infoobject request first and the iinfoprovider request as followed by the successful movement of the first one.
The STMS automatically take cares the sequence of trasnporting the objects one by one to the destination system.
Regards,
Venkat S

Need help on Collecting Objects in Transports

Hi All,
I am collecting the Application Component for Transporting.While Collecting , i have given the grouping as "Neccessary Objects". But while executing,it is acting as a "Data Flow Before". It is installing all the below Objec ts.Please help on this Issue.
Thanks,
Jelina.

Hi Jelina,
After collecting objects, choose option as "Only Necessary objects" and then below the object collected you will find some dependant objects related to it.
For eg: If you are collecting cube beside that is a check box which will be checked for transport.
Below that you can find many things where that cube is used example--infoarea or info object.
Beside that info area or info object you wil find a check box, right click and click on "Donot Transport Any below". So the object on which you clicked and the below objects will not be transported. Do the same thing for all the underlying objects.
Hope it helps!!!
Thanks
Lavanya

Collecting Objects for Transport

Hi,
I have to transport a new cube, few of the info-objects for this cube are already active in QA. Also the application component and infoarea are active in QA. what all should I collect for transport, can someone provide me steps. After going to Transport Connection in RSA1 Ive selected the cube, now it shows me the list containing application component, info area, info objects.. what should I do next.
Thank you,
Sam

Use Option of Only Necessary Objects - Execute - Install
Make sure you give right Package.
Thanks,
CP

Collecting objects for transports

I'm trying to modify queries. When i open a query, it shows "white" as in it is modifiable.
In tranport connection on AWB, when i click on Bex Truck, I see no standard Bex request assigned.
I think the query is already assigned to some request, but since I want to me my own changes, how do i do it? What will happen to the changes that might have been recorded to another request.
Thanks
Fran

Hi Fran,
if you are not seeing nothing in by clicking on Bex Truck, maybe there is some released request...if you collect the objects (your query) in transport connection, you will be able to see if the object is embedded in a CR or not...(it is an info available on one column on the right side...).
Anyway, if you create a new request and insert your query there, it's good, but pay attention: if the old CR (if still existing) will be transported later, old versions (generally speacking) overwrite the new ones...
Hope it helps!
Bye,
Roberto

Business object for transport request creation

Hi,
I want to know the business object for transport request creation. Kindly help.
Thanks and regards,
Venkat.

I am not sure but u can try this BO CTREQUEST.

Unblock a Object for Transport

Hello Gurus,
How Can I unblock a Object for Transport. My Transport is red ( Error). The Object is Blocked in Quality System...TW104
What Can I DO ??
THANKSS
Edited by: Baris Ozcan on May 13, 2008 10:17 AM

Hi
once your TR has released to further system and its became RED.IF this is correct as per my understanding,No need for going unblock the same transport request.because once its released go for creation of NEW Transport Request which are the objects has required ,make one TR and relase to further systems.(in u r case its Quality)
just open the TR and check the log overview of the transport,
whether any objects has missed or not avialble in quality system(might be the reason ur TR has RED)and anlyse the logs .you can find the solution to that.
if u r is not relased to further systems and you want to change/ remove of the objects from the TR,then u can goto SE03 and unlock the TR and make fresh TR.
mahesh

Collection of Objects for Transporting to Test Box

Hi Experts,
I am ready to transport from BW Dev system to Testing system.Actually some of the Objects activated before for diffrent applications like FI-CO,SD and CRM and exported to testing system.Now My turn to export some of the objects to test box.
I am little bit in confusion.How do I collect the objects which I activted with my own request.I am sure I don't need to transport the Objects which already in Test box though my functional application required the same objects.If So how can I find which Objects are in Test box already or not.Is there any particular method to find which objects are not transported from Development to Testing.Please advise me.I need to finish my Transports by the tomorrow.I am running with urgency.
Thanks,
Suryam.

Hi,
Unfortunatelly for you, the best way is to collect through the transport collector in RSA1 all the objects that are needed for your solution.
Normally if you did not change anything on objects that are already transported, the system will not collect them.
But I would say that there is no added value to make a difference between stuff that were already transported and the other objects as in Dev you are aroking with them correctly....
Hope it helps
PYG

Collecting objects in transport request

HI Experts,
                My development is completed and now i have to collect the objects in transport request. my development is like
1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
2)Infopackeage for Datasource
3)DSO
4) Infocube
5)multiprovider
6)queries and views
7)web templates
This is the first time I am collecting this many objects. So please give sugessions how to collect these objects in a single transport request.
Thanks and Regards,
RAJ

It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
1) collect all the InfoObjects
2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
3) collect datasources/Infosources (they need Infoobjects.. so they are dependent on 1)
4) collect transformation (they need 2 and 3)
5) collect DTPs and InfoPackages   (they need 3, 4)
6) collect the reports
7) collect the web templates
make sure these are transported in sequence... each on dependent on previous

Runtime error while collecting objects for activaton from BC

Hi gurus,
While collecting objects from busines content for installation, it is giving runtime error whith below description.
"UNCAUGHT_EXCEPTION" "CX_RSD_NAME_ERROR"
"SAPLRSDN_IOBJ" or "LRSDN_IOBJU35"
"RSD_IOBJNM_PARSE"
R3TR     FUGR     RSDN_IOBJ
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSD_NAME_ERROR', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Name 0SRVE_IS3___F00133 is invalid
Pl spot light on this .
Thanks in advance.
Message was edited by:
        sri sri

Hi Sri / Vach,
this note can help you and implement the same
1102743 - Dump during activation of business content
Thanks
kishore

Problem in collecting objects for BI Contents installation

Hi All ,
While collecting objects in BI content i am getting some error. Every time in stus bar the status shows "Destination Check with client ". After this status comes the session logs out automatically and a Error massage come i.e. "PBI error : SAP System error ". and even no log is maintained in slg1.
please help me.
Regards,
Rohit Garg

Rohit,
Before collecting the objects, select the proper source sytem (keyboard shortcut is Shift + F7), then collect the objects .. also as suggested you need to check if the RFC connection to your source system is woeking fine ..
Thanks.

Help with creating objects for ArrayCollection

Hi all,
I am trying to update an ArrayCollection with Objects created
in ActionScript
In the end the array collection will provide data to a chart
I can add the objects to my arrayCollection and access the
values of the properties via text field output but the data is not
Bindable
So my text field shows the values from my AC but my chart
isn't getting the data

AaffordableWeb:
Wrapping the Object in an ObjectProxy seems to have worked in
that the properties are bound but my Chart shows nothing.
I have posted the code below (keep in mind its a work in
progress)
Any help would be appreciated.
//////Code
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="handleResult(event);">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.events.FlexEvent;
import mx.rpc.events.ResultEvent;
import mx.utils.ObjectUtil;
import mx.utils.ObjectProxy;
//// set price change range for the four arrays
[Bindable]
public var nPchange:Array = new Array(-12, -11,
-10,-9,-8,-7,-6,-5,-4,-3,-2,-1,0);
[Bindable]
public var pPchange:Array = new Array(12, 11,
10,9,8,7,6,5,4,3,2,1,0);
//// Set up temprary var
[Bindable]
public var tempval:*;
[Bindable]
public var tempval2:*;
[Bindable]
public var tempvaly:*;
[Bindable]
public var tempvalr:*;
[Bindable]
public var tempvalr2:*;
[Bindable]
public var tempvalry:*;
[Bindable]
public var ylovert:Array = new Array;
[Bindable]
public var rylovert:Array = new Array;
[Bindable]
public var ymin:*;
[Bindable]
public var testarray:Array;
/// declare the lPrime ac
// declare the rprime ac
[Bindable]
public var rPrime:ArrayCollection = new ArrayCollection();
// declare rylover ac
[Bindable]
public var ryLover:ArrayCollection = new ArrayCollection();
// declare ylover ac
[Bindable]
public var yLover:ArrayCollection = new ArrayCollection();
/// declare default cMargin
[Bindable]
public var cMargin:* = 80;
[Bindable]
public var lPrime:ArrayCollection;
public function handleResult(event:FlexEvent):void
pedata();
public function pedata():*{
/// begin loop
lPrime = new ArrayCollection();
for(var n:int = 0; n < nPchange.length; n++){
var value:* = nPchange[n];
if(value == 0){value = .0001;}else{value = value;}
tempval = -1 * value / (cMargin + value);
tempval2 = (tempval / value);
ylovert.push(tempval2);
var o:Object = new Object;
o.PriceChange= value;
o.PriceElasticity= tempval2;
lPrime.addItem(new ObjectProxy(o));
} // end loop
lprime.xField= "PriceChange";
lprime.yField= "PriceElasticity";
lprime.dataProvider = lPrime;
///last brkt
]]>
</mx:Script>
<mx:AreaChart id="myChart" showDataTips="true"
mouseSensitivity="25" width="100%" >
<mx:horizontalAxis>
<mx:LinearAxis maximumLabelPrecision="1" title="Pricec2a"
minimum="-12" maximum="12"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis displayName="Price Elasticity to Break
Even" minimum="-1.5" maximum="-1" />
</mx:verticalAxis>
<mx:series>
<mx:AreaSeries id="lprime" form="curve" >
<mx:areaFill>
<mx:SolidColor color="red"/>
</mx:areaFill></mx:AreaSeries>
</mx:series>
</mx:AreaChart>
<mx:Text id="txt2"
text="{lPrime.getItemAt(3).PriceElasticity}"/>
</mx:Application>

Add Elementry search help to collective SH for vendor

Hi friends.
I am making a search help for blocked vendors..
-     Name LFA1 - NAME1
-     Vendor number LFA1 LIFNR
-     Account group LFA1 - KTOKK
-     Company code LFB1 - BUKRS
-     Purchasing organization LFM1 - EKORG
-     Blocking indicators
o     Central posting block: LFA1 SPERR
o     Posting block for company code: LFB1 - SPERR
o     Centrally imposed purchasing block LFA1 - SPERM
o     Purchasing block at purchasing organization level: LFM1 - SPERM
o     Block Function: LFA1 - SPERQ
i have made a Database view for LFA1 LFB1 and LFM1
But when i run the SH , output list contains values against input of vendor (LIFNR) only..not for others fields..
what should i do..
regards
Message was edited by:
        Madan Gopal Sharma

Hi
first write a report to fetch the Only blocked Vendors,
and create a Z table with the required fields for that Blocked vendors and update that Z table with the data fetched in the program.
The using that Table create a elementary search help for the blocked vendors.
see the help.
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points if useful
Regards
Anji

EVB COM Object for Transport

The syncParam property of the syncOpt component seems to be missing. Does anyone know where I can download the correct version?
Or does anyone have a API set for the C++ API's so I can use this property.
I am trying to sync some tables down and others down only. Without this property does anyone have suggestions on how to accomplish this??
Thanks in advance

I am using 5.0.2, and according to the docs there is a SyncParam property that you can set to do a selective sync. When I enum the object the property is not their...
And feedback is of much help....
I have gotten around the problem for now by creating 2 packages with 2 different users. The first one syncs my upload data and the second contains my download only data, that I only need to pull when I start a new inventory.

Help in collecting objects for transport into Q

Similar Messages

Maybe you are looking for