Help!!!! In configuring deploy services

Hi everyone,
i want to deploy my application on to some location other then the default StandardApplicationSeference that is .../cluster/apps/sap.com/ say suppose c:/sampleAppli/ and from there only want to start the server through scripts. right now my application is working fine which is deployed to default root folder specified by sap properties
Thanks
Abhishek

Hi Sir,
Thank you for the information I have check the command & followed a guide on the link below.
(MAIN SITE)
Step 1: Add the Subnet of the Remote Site to the "Split Tunnel" for the remote VPN -done
Step 2: Turn On Hair Pinning -done
Step 3: Add the "Remote VPN Network" to the EXISTING site to site VPN on the Main Site. -done
(REMOTE SITE)
Step 4: Add a NAT Exemption on the Remote Site ASA
Step 5: Add the Remote VPN Pool to the EXISTING Site to Site VPN Access List
Details is on this link: http://www.petenetlive.com/KB/Article/0000040.htm
How can I check If my counter part already did step 4 & 5. Can it be seen on cisco asa packet trace. please see result.
Again thank you sir for your support.

Similar Messages

Help with Windows Deployment Services

The WDS service was running. I restarted the service and tested with same result.
What is the correct bootfile name to be using? I have seen via Google searches - boot\pxeboot.n12 , boot\x64\pxeboot.com and boot\x64\wdsnbp.com.
This is how I added DHCP option 60....
NETSH
NETHSH>DHCP server \\nameofserver
add optiondef 60 PXEClient String 0 comment=”Option added for PXE Support”
set optionvalue 60 STRING PXEClient
show optionvalue all
exit
And this is how I removed option 60...
netsh dhcp server \\servername delete optiondef 60
Hopefully that is correct. Any other ideas?

I am trying to move from FOG to WDS after running in to serious UEFI issues with FOG.Right now I'm stuck with machines PXE booting to WDS server.I keep getting the message ProxyDHCP service didn't reply to request on port 4011.WDS and DHCP are on different servers. There are plenty of IP addresses available, and they are on the same subnet. I did originally configure DHCP option 60, but deleted that option after troubleshooting. I have configured Windows Firewall to allow inbound and outbound connections on UDP ports 67-69 and 4011 on both DHCP server and WDS server. I have also tried just using IP address in DHCP option 66. As for option 67, I don't even know the right bootfile name to use at this point, figured I'd tackle that if I ever get past this error message.Would appreciate any help! I have a two labs to image and deploy...
This topic first appeared in the Spiceworks Community

Windows deployment services configuration

Hi,
Can any one tell me how to deploy .EXE file in windows deployment services. It`s accepting .MSI file types only.
Regards
Sakthi

Hi Sakthi,
>>Can any one tell me how to deploy .EXE file in windows deployment services. It`s accepting .MSI file types only
By default, in Active Directory, group policy can be used to deploy .msi software package. If we want to deploy a .exe file with group policy, we can convert the .exe file into .msi package or we can use a script to install the file and use
group policy to deploy the script to clients.
Windows Deployment Services is used to deploy Windows operating systems over the network. To push .exe to the operating systems, SCCM is a great option.
Regarding SCCM, the following article can be referred to for more information.
Configuration Manager
https://technet.microsoft.com/en-us/library/gg682129.aspx
Regarding deploying .exe files, the following thread can be referred to for more information.
What is the best way to push deployment of a exe file
https://social.technet.microsoft.com/Forums/en-US/a79b3406-6bc1-4af1-b826-522b1d4fa827/what-is-the-best-way-to-push-deployment-of-a-exe-file?forum=winserverDS
In addition, if we have questions regarding SCCM, we can ask for suggestions in the following forum.
Configure Manager 2012
https://social.technet.microsoft.com/Forums/en-us/home?category=systemcenter2012configurationmanager
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Need help configuring Excel Services

I've configured both the Excel Serives and Secure Store Target applications and continually receive the following error message when trying to view the Simple Projects List sample report:
An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
Project Server - Simple Projects List
The Server Logs show the following errors:
Access Denied: Claims stored in the credentials did not match with the group claim for a group app.
The Microsoft Secure Store Services application Secure Store Service failed to retrieve credentials. The error returned was 'Access Denied.' ...
Access is denied. (Fault Detail is equal to Microsoft.Office.SecureStoreService.Server.SecureStoreServiceFault)
SSS has failed with the following exception: Access is denied.
Unable to esablish a connection using credentials retrieved from SSS. This could be because the Unattended Service Account is not configured or because the credentials retrieved from SSS are not valid.
I've repeated the steps to create these configurations a few times, and continue to get the same errors. Any help would be appreciated!
Thanks

Hello,
I need help setting up excel services.
Excel service is already running on sharepoint server.
I have one reporting file which is generated by DBA with database connection. i want to upload that file under document library and i want whenever user open it through document library, it gets updated through database connection
This is my first time, so pls guide me
Reporting file has authentication set to --> None
Do i require any specific settings for authentication? like unattended account ? which username should i use
Connection String -->
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=True;User ID=ExcelServices;Initial Catalog=SurveyData;Data Source=jdb1;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RSTKW7W-06709;Use Encryption for Data=False;Tag
with column collation when possible=False
http://../training/sptestsite/Medication_Audit_Report
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
Trusted File Location - is this place do i need to upload that reporting file?
Trusted Data Connection Libraries - is this place do i need to save connection file .odc ?
If i am not wrong, should i put
Trusted File Location = http://../training/sptestsite/Medication_Audit_Report
Trusted Data Connection Libraries = http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
http://../training/sptestsite/Medication_Audit_Report -- Here only reporting file will be uploaded right?
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/ -- Here only database connection .odc file will be uploaded?
what other settings are required. please correct me
my email address - [email protected]
Harsh

Windows could not start the windows deployment services server Error 1067: The Process terminated unexpectedly - Please help

Hello All
I am trying to set up a PXE service point on my DP in SCCM 2012 R2
1) I have enabled the role on the DP
2) rebooted and verified WDS installed as a role.( I let SCCM enable this role as instructed)
3) When I tried to start the role from services I get the error below:
Note: I also followed the troubleshooting steps in this technet article but still it stops at the half way point
http://support.microsoft.com/kb/2009647/en-us
Phil Balderos

Hi,
Here is a similar post for your reference.
Windows Deployment Service
http://www.windows-noob.com/forums/index.php?/topic/3938-windows-deployment-service/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Configuration Manager services stoping on regular basis.

we have installed and configured WebCenter Interaction 10.3 on Windows 2003 (x86) and using JVM 1.5.0_09.
Running all the component as windows services. Today our Configuration Manager services is stopping on regular basis.
Error:
================================================================================================
STATUS | wrapper | 2009/08/06 06:14:48 | --> Wrapper Started as Service
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.2', '%JVM_2%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.3', '%JVM_3%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.4', '%JVM_4%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.5', '%JVM_5%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.6', '%JVM_6%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.7', '%JVM_7%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.8', '%JVM_8%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.9', '%JVM_9%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.10', '%BIT_MODE%' is not a valid argument to the jvm. Skipping.
STATUS | wrapper | 2009/08/06 06:14:48 | Launching a JVM...
INFO | jvm 1 | 2009/08/06 06:14:50 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2009/08/06 06:14:50 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'.
INFO | jvm 1 | 2009/08/06 06:14:50 | The file is located on the path at the following location but
INFO | jvm 1 | 2009/08/06 06:14:50 | could not be loaded:
INFO | jvm 1 | 2009/08/06 06:14:50 | C:\bea\alui\configmgr\2.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32\wrapper.dll
INFO | jvm 1 | 2009/08/06 06:14:50 | Please verify that the file is readable by the current user
INFO | jvm 1 | 2009/08/06 06:14:50 | and that the file has not been corrupted in any way.
INFO | jvm 1 | 2009/08/06 06:14:50 | One common cause of this problem is running a 32-bit version
INFO | jvm 1 | 2009/08/06 06:14:50 | of the Wrapper with a 64-bit version of Java, or vica versa.
INFO | jvm 1 | 2009/08/06 06:14:50 | This is a 64-bit JVM.
INFO | jvm 1 | 2009/08/06 06:14:50 | Reported cause:
INFO | jvm 1 | 2009/08/06 06:14:50 | no wrapper in java.library.path
INFO | jvm 1 | 2009/08/06 06:14:50 | System signals will not be handled correctly.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:50 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 06:14:50 | 8-6-2009     6:14:50.872     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 06:14:51 | 8-6-2009     6:14:51.419     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 06:14:51 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.coyote.http11.Http11Protocol init
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initializing Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.Catalina load
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initialization processed in 1157 ms
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardService start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting service cm
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardEngine start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Deploying web application archive cm.war
INFO | jvm 1 | 2009/08/06 06:14:55 | Aug 6, 2009 6:14:55 AM org.apache.catalina.realm.JAASRealm setContainer
INFO | jvm 1 | 2009/08/06 06:14:55 | INFO: Set JAAS app name cm
INFO | jvm 1 | 2009/08/06 06:14:55 | 06 Aug 2009 06:14:55,810 INFO - Reading standard config org/apache/myfaces/resource/standard-faces-config.xml [FacesConfigurator:151]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/jsf-facelets.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols-framework.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/tomahawk-1.1.3.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config /WEB-INF/faces-config.xml [FacesConfigurator:411]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,341 WARN - Locale name in faces-config.xml null or empty, setting locale to default locale : en_US [LocaleUtils:52]
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: Registered application name: OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - ServletContext 'null' initialized. [StartupServletContextListener:99]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - Serialization provider : class org.apache.myfaces.shared_impl.util.serial.DefaultSerialFactory [StartupServletContextListener:140]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,185 INFO - Root WebApplicationContext: initialization started [ContextLoader:174]
INFO | jvm 1 | 2009/08/06 06:14:57 | Aug 6, 2009 6:14:57 AM org.apache.catalina.core.ApplicationContext log
INFO | jvm 1 | 2009/08/06 06:14:57 | INFO: Loading Spring root WebApplicationContext
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - JDK 1.4+ collections available [CollectionFactory:76]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - Commons Collections 3.x available [CollectionFactory:80]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,294 INFO - Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-acegi-security.xml] [XmlBeanDefinitionReader:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,607 INFO - Bean factory for application context [Root WebApplicationContext]: org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy [XmlWebApplicationContext:100]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,622 INFO - 9 beans defined in application context [Root WebApplicationContext] [XmlWebApplicationContext:322]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate MessageSource with name 'messageSource': using default [[email protected]9d] [XmlWebApplicationContext:473]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ApplicationEventMulticaster with name 'applicationEventMulticaster': using default [org.springframework.context.event.SimpleApplicationEventMulticaster@f0f2f1e] [XmlWebApplicationContext:495]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ThemeSource with name 'themeSource': using default [[email protected]f0fdecd] [UiApplicationContextUtils:83]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Pre-instantiating singletons in factory [org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy] [DefaultListableBeanFactory:261]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Validated configuration attributes [AbstractSecurityInterceptor:220]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Using context class [org.springframework.web.context.support.XmlWebApplicationContext] for root WebApplicationContext [ContextLoader:189]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Root WebApplicationContext: initialization completed in 703 ms [ContextLoader:199]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Initializing filter 'RequestContextFilter' [RequestContextFilter:152]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Filter 'RequestContextFilter' configured successfully [RequestContextFilter:177]
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:57 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Deploying web application archive ROOT.war
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.coyote.http11.Http11Protocol start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Starting Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.catalina.startup.Catalina start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Server startup in 4531 ms
INFO | wrapper | 2009/08/06 07:10:02 | User logged out. Ignored.
INFO | wrapper | 2009/08/06 07:10:03 | User logged out. Ignored.
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 07:10:04 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Closing application context [Root WebApplicationContext] [XmlWebApplicationContext:599]
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Destroying singletons in {org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy} [DefaultListableBeanFactory:272]
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.279     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 07:10:04 | INFO: PmbApplication.run() exiting forcefully... Releasing one worker thread.
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.810     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 07:10:04 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
STATUS | wrapper | 2009/08/06 07:10:06 | <-- Wrapper Stopped
============================================================================
When we are starting , it stays for couple of mins say 10/15 mins then it stops.
Can any body have any idea what should i do to get it resolved.

The logs look odd to say the least on start up and there are couple items when the service gets the signal to shutdown that are suspicious.
My suggestion is to troubleshoot top down. Clean up the discrepant messages upon startup.
message : INFO
Please verify that the file is readable by the current user
and that the file has not been corrupted in any way.
One common cause of this problem is running a 32-bit version
of the Wrapper with a 64-bit version of Java, or vica versa.
This is a 64-bit JVM.
Are you attempting change the existing out of box JVM?
You know it doesn't use sun jvm anymore. It's JROCKIT.
Make sure your JVM Settings are as follows:
C:\bea\alui\configmgr\2.0\settings\config\wrapper_base.conf
# Java Application
wrapper.java.command=%JRE_PATH%/bin/java
THEN Verify:
CMD
cd C:\bea\alui\common\jre\1.5.0_32\
java -versionYou should get something like.
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
BEA JRockit(R) (build R27.4.0-90-89592-1.5.0_12-20070928-1715-windows-ia32, comp
iled mode)
In any case, your enviroment seems funky. Use the tips above to troubleshoot.
Troubleshoot this error first and find out why it thinks your using a 64 bit JVM versus a 32 bit one.
Last tip: Place Logging into Debug to see whether more logging will give you further insight into the problem.
Hope this helps!
Cheers!!!

Windows Deployment Services Unable to PXE boot clients PXE-E53: No Boot Filename Received

Hi
I'm trying to configure WDS/MDT to deploy Windows 8.1. I've captured an image and I'm ready to deploy the image to a workstation, as per the above title when I attempt to PXE boot a test workstation it just times out with the following error message PXE-E52:No
Boot Filename Recieved. I've tried a few tweaks to get it working however no such luck.
The setup is as follows it's a virtual Windows 2012 R2 machine, just a fresh member server with microsoft deployment toolkit installed and WDS role installed with the nesscary framework features installed.
I've tried tweaking the properties of most of the settings within the server settings in WDS with no such luck.
I'm a novice at WDS but from what I've read I shouldn't need configure that much in the first place to get it working.
I'm willing to bet it will be something I've overlooked so I need a 2nd opinon, could anyone provide any troubleshooting tips. If you require anymore information please let me know.
Cheers

Hi Joel,
This error may caused by the WDS server is not pushing the images because PXE Clients are not able to download or communicate with the TFTP server.
The image can’t be download generally caused by the the Vlan is not enabled IP helper/DHCP relay agent configured on it, all DHCP broadcasts on UDP port 67 by client computers
should be forwarded directly to both the DHCP server and the Windows Deployment Services PXE server.
The related KB:
PXE clients computers do not start when you configure the Dynamic Host Configuration Protocol server to use options 60, 66, 67
http://support.microsoft.com/kb/259670
The similar thread:
PXE-E53: No boot filename received
http://social.technet.microsoft.com/Forums/systemcenter/en-US/8de3bd6a-f8ec-41d9-ae0f-5b2fdb9e5831/pxee53-no-boot-filename-recieved?forum=configmgrosd
WDSServer (Windows Deployment Server) Fails to Start
http://social.microsoft.com/Forums/en-US/d96b0b86-f2b0-49a5-8946-19ab515f23e6/wdsserver-windows-deployment-server-fails-to-start?forum=windowshpcitpros
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Deployment Service. Network Profile Radio Buttons greyed out with R2

Hi All
I have downloaded and setup Server 2008 R2 (not yet activated). I have added the following roles "DHCP Server", "DNS Server", "Active Directory Domain Services" and "Windows Deployment Services". I can PXE boot a test client machine and (using the boot.win from windows 7 dvd) multicast a XP Image to it. This setup is connected via a 100 Mb switch and is an isolated network.
Under windows deployment services - if I right click my server - select properties - network tab "Network Profile is greyed out". I have tried running wdsutil /Set-TransportServer /Server:big /Profile:100Mbps but get the following error message: "Windows Deployment Services Management Utility Version 6.1.7600.16385. Error code 0xC110011F This WDS transport server does not support network profiles.
I have tried this on two hardware setups:
An Intel D915GUX 3GHz 2GB RAM and Marvel Yukon 88E8050 ethernet controller.
An Intel D965 Core2Duo 1.86GHz 2GB RAM and Intel 82566DM Network controller.
Incidently I have done the same setup with Server 2008 (not R2) on the D965 and the Network Profile radio buttons are not greyed out. If I upgrade the same test machine to server 2008 R2 the Network Profile radio buttons are greyed out. Is this a design change, does Server 2008 R2 no longer support network profiles as I am now unable to select 10 100 or 1000 Mbs ?
If more information is required or if anything needs further detail please let me know.
Thanks for any help.
Liam.D

Is there any way at all to manually set or control the network profile? In my environment, a SCCM\WDS multicast stream is bottoming out on speed and network utilization when the stream crosses a Nexus 7009 router. Speeds go from 200 Mbps to 20 mbps. I have
a theory that this "new" automatic configuration is placing the clients in a slow network profile that are on the opposite side of the router and I have been unable to find a way to speed of the transmission. I have also ruled out the "master
client" slowing down the stream buy using different clients only connecting to a stream 1 at a time. I have also ruled out the router as the source of the problem by having a VLC client listen to the multicast stream on the same side of the router as
the slow clients. The VLC client (unknown to SCCM\WDS) was able to receive the transmissions at 20 % utilization / 200 Mbps.
-Tony

Make WDS Service account approve pending devices in WINDOWS DEPLOYMENT SERVICES

Hi Technet and all other people reading this.
I am at the moment trying to get a Service account(WDSService) to approve pending devices in Windoes Deployment Services on a WDS server.
I have created a domain called LALALA.dk on a server(DNS is included in the domain), and installed windows deployment services on another server. The Deployment service is setup to prestage devices, and therefore devices needs to be approved before it can
be deployed.
My problem is that at the moment, we are using Domain Admin accounts to do the approving and i wish to change that to a service account, made specially for this job which ofc. should have minimum right. Because i have a very hard time understanding
why i NEED to grant domain admin rights or local admin rights to a person just so that he can approve pending devices. There has to be a way to use a service account to do the job.
I have done some research and found out that local admin, domain admins and enterprise admins are the only onces that have the permission to approve pending devices, and that a problem for me, when i want a service account to do it for me(Not automatically)
but a service account that can name and approve devices manually.
Here is what i have allready tried.
1. making WDSService run the Windows Deployment Services (service), but this didnt work because it lacks the permissions needed.
2. I have given the read+write permissions on the remoteinstall folder, even tried with full control.
3. Delegate control on the OU in active directory, to create computer object, with full write permissions. I also tried with full control. I added both WDSServer$ and the service account(WDSService) on the OU. Still nothing.
4. I then downloaded subinacl tool, and granted WDSService account permission to start, stop the service, even tried with full control on the Windows Deployment Service(WDSServer as server_name). I get error 1297 something with priviledge missing from the
service account to perform the actions. So still nothing. Which is really weird when i ran a command i cant remember now, where i could see that the service account had full permission granted to the service, and still was'nt able to start the service.
5. I then tried to create a script using WDSUTIL, but was not able to grant the service account permissions to perform the action of approving pending devices. And i dont want to use a script everytime i need to approve a device.
6. Since the local system account is running the Windows Deployment Service , my thought was to join the WDSService account to the built-in NT AUTHORITY/local system or NT AUTHORITY/local service, this seems impossible from what i experienced, unless you
are super powershell geek i quess you can, so this option didnt get me anywhere as well.
6. I then created a gpo granting wdsservice account the "log on as a service" policy on the Windows deployment service Server, still nothing works as attended. I still get error 1297.
7.I tried copying the registry keys (WDSSERVER) from the HKEY_LOCAL_MACHINE hive on the WDS Server, and imported it into my Domain's registry, but could'nt find the service i wanted to grant permissions to in the group policy settings (computer configuration/policies/windows
settings/security settings/System Services) I then created a registry entry with group policy (computer configuration/policies/windows settings/security settings/registry) to point to (local machine/system/controlset001/services/WDSServer) and granting
WDSService account full control and deployed the policy to the Deployment server. Nothing happend and i still cant approve pending devices with my service account.
from my understanding service account where created to maintain small certain tasks or actions with limited permissions, so if comprimised they could only do very little damage, and so that this account can be setup to perform the tasks without any administation
of the account. So my question is, is it even possible to achieve what i want = granting a service account the permission to perform the action of approving pending devices on a Windows Deployment Server, and if so how ?
I am so confused over this and I am really reaching the limits of my understanding of this.
Help is very much appreciated.
Henrik Larsen

Hi ZeR1X,
The Require Administrator approval is for unknown computers.
The similar thread:
WDS - Request administrator approval not working
https://social.technet.microsoft.com/Forums/windowsserver/en-US/b9088be7-7afe-4e2b-b5fb-4554a92c4a2a/wds-request-administrator-approval-not-working
More information:
Windows Deployment Service fails to start with error information of 0x5
http://support.microsoft.com/kb/2009647
WDS 3.01 Troubleshooting Guide
http://technet.microsoft.com/en-us/library/cc754828(v=ws.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Packaging Configuration Management Service of the portal

Hi:
I am writing a KM namespace filter to be applied to a CM
repository of news items. There is an 'admin console' for
this functionality. The 'Admin' in her/his admin console
iview does some selections regarding no. of items,name of
categories to display and saves them.
Since KM filter functionality or CM repository properties
can't be changed during runtime,ie.,any change of selections
done by the 'admin' needs restart of the servlet engine,
which is not an option in a production environment. So, I
thought of using 'Configuration Management Service' of the
portal to read from and write to all the selections during
the runtime.
<u>Everything is fairly easy regarding writing a configuration
management service, except packaging it and deploying it.
The documentation makes no sense if you compare it to the
example given along with the portal documentation.
Do we have to use any special plugin to package this
service ? Or is there any updated documention available ?</u>
Please help me with this problem,
Thank you very much,
Prasad Nutalapati.

Hi,
You can access through useradmin.
example: http://localhost:<port>/useradmin
Here, log-in to the application as an administrator. You can see the
"Identity Management".
Thanks
R.Murali

PXE-E61 Meadia test failure error occurred during installing OS form windows deployment service?

Hi,
I have installed WDS service in my dell server windows 2008 server R2. I am using WDS server and Dhcp server in different machine.I have received error "PXE:E-61 Media test failure check cable ", when I trying to install
OS from my WDS server. But I have created a one partition in VMware and successfully installed windows 2008 R2 server from Windows deployment service. But when I am trying to install the OS in another dell server from WDS, I have received this error.
Any help?

Hi,
For PXE boot, we need the client boot from network. Check your boot option in BIOS settings. Meanwhile, we need WDS server and
DHCP server accessible. If the client locate in a different subnet, IP helper should be configured to point to WDS server and DHCP server.
If everything is configured correctly, I recommend you contact with the manufacture.
Hope this helps.

Windows Deployment Service Failed to Start

Hi,
I am trying to test the deplyment of Windows Vista RC1 using Windows Deployment Services (WDS). I have Installed WDS using WAIK on Windows Server 2003 Sp1. Installation completed Successfully, however i am not able to start the service of WDS. Following errors are logged in event logs:
Event ID: 257 Source: WDSServer
Description: An error occurred while trying to start the Windows Deployment Services server. Error Information: 0x54B
Event ID: 513 Source: WDSServer
Description: An error occurred while trying to initialize provider BINLSVC from C:\WINDOWS\system32\binlsvc.dll. Windows Deployment Services server will be shutdown.Error Information: 0x54B
Any help would be greatly appreciated.
Thanks in advance....
Vineet Arora

I am having a similar issue with WDS. Here is how my server is configured:
1. The server was initially a RIS Server, it was confiured with Windows Server 2003 SP1.
2. RIS was then removed, and Server 2003 SP2 was installed.
3. I then installed WDS (Obviously native mode now)
4. Configured the WDS Settings for PXE etc.
5. The WDS Server Service however just refuses to start, these are the messages in the Event viewer:
Application:
Source:WDSServer
Category: WDSServer
Type: Error
Event ID:257
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x32
System:
Source: Service Control Manager
Category: None
Type: Error
Event ID:7024
The Windows Deployment Services (WDS) Server service terminated with service-specific error 50 (0x32).
Any ideas?
Laila*

Issue in deploying Service Bus projects using maven

Hi,
I am following the following documentation for deploying service bus projects to my OSB server.
http://docs.oracle.com/middleware/1213/core/MAVEN/osb_maven_project.htm#MAVEN8973
I was able to issue mvn package as described in documentation and also able to see sbar files in .data/Maven directory of each project.
But i am seeing following error when i issue mvn pre-integration-test. Am i missing any steps.
[INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (default-deploy) @ System ---
[INFO] Service Bus Archive deployed using session Service_Bus_Maven-System-1424718369010.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'w
eblogic.management.mbeanservers'
        at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.ja
va:237)
        at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.j
ava:120)
        at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:369)
        at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:267)
        at oracle.sb.maven.plugin.deploy.MBeanHelper$MBeanInvocationHandler.getJMXConnector(MBeanHel
per.java:228)
        at oracle.sb.maven.plugin.deploy.MBeanHelper$MBeanInvocationHandler.invoke(MBeanHelper.java:
131)
        at com.sun.proxy.$Proxy16.createSession(Unknown Source)
        at oracle.sb.maven.plugin.DeployMojo.createSession(DeployMojo.java:141)
        at oracle.sb.maven.plugin.DeployMojo.execute(DeployMojo.java:89)
        at org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.j
ava:101)
        at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209)
        at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153)
        at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145)
        at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBu
ilder.java:84)
        at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBu
ilder.java:59)
        at org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter
.java:183)
        at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)
        at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)
        at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)
        at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)
        at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156)
        at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537)
        at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196)
        at org.apache.maven.cli.MavenCli.main(MavenCli.java:141)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290)
        at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230)
        at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)
        at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352)
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.d
omainruntime'. Resolved 'weblogic.management.mbeanservers' [Root exception is javax.naming.NameNotFo
undException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic
.management.mbeanservers']; remaining name 'domainruntime'
        at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1180
        at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:270)
        at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:187)
        at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:210)
        at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
        at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
        at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
        at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:701)
        at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:231)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:527)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:523)

Hi Siva,
I am facing same issue I am bale to create package but while deployment goal I am facing problem.I am following same document as you do.
I can see my mvn-pre-integration ..show me sucees in result
[DEBUG]   Excluded: org.apache.maven:maven-artifact:jar:3.0.3
[DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:package from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracl
-servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
[DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:package' with basic configurator -->
[DEBUG]   (f) oracleHome = C:\Oracle\Middleware\Oracle_Home
[DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
[DEBUG]   (f) system = false
[DEBUG] -- end configuration --
[INFO]
[INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (default-deploy) @ TestOSBLinux ---
[DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracle
servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
[DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy' with basic configurator -->
[DEBUG]   (f) oraclePassword = Oracle123
[DEBUG]   (f) oracleServerUrl = http://192.168.137.150:7001
[DEBUG]   (f) oracleUsername = weblogic
[DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
[DEBUG] -- end configuration --
[INFO] Service Bus Archive deployed using session Service_Bus_Maven-TestOSBLinux-1429888616161.
[INFO]
[INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (deploy) @ TestOSBLinux ---
[DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracle
servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
[DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy' with basic configurator -->
[DEBUG]   (f) oraclePassword = Oracle123
[DEBUG]   (f) oracleServerUrl = http://192.168.137.150:7001
[DEBUG]   (f) oracleUsername = weblogic
[DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
[DEBUG] -- end configuration --
[INFO] Service Bus Archive deployed using session Service_Bus_Maven-TestOSBLinux-1429888623126.
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building LinuxMachine 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[DEBUG] Lifecycle default -> [validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-so
rces, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, i
tegration-test, post-integration-test, verify, install, deploy]
[DEBUG] Lifecycle clean -> [pre-clean, clean, post-clean]
[DEBUG] Lifecycle site -> [pre-site, site, post-site, site-deploy]
[DEBUG] === PROJECT BUILD PLAN ================================================
[DEBUG] Project:       LinuxMachine:LinuxMachine:1.0-SNAPSHOT
[DEBUG] Dependencies (collect): []
[DEBUG] Dependencies (resolve): []
[DEBUG] Repositories (dependencies): [central (https://repo.maven.apache.org/maven2, default, releases)]
[DEBUG] Repositories (plugins)     : [central (https://repo.maven.apache.org/maven2, default, releases)]
[DEBUG] =======================================================================
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO]
[INFO] TestOSBLinux ....................................... SUCCESS [ 20.752 s]
[INFO] LinuxMachine ....................................... SUCCESS [ 0.009 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
But not get deployed .....
When i run mvn com.oracle.servicebus.plugin:oracle-servicebus-plugin:deploy** to invoke deployment goal it fails which below logs
org.apache.maven.plugin.MojoNotFoundException: Could not find goal 'deploy*.*' in plugin com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0 amon
goals deploy, package
        at org.apache.maven.plugin.internal.DefaultMavenPluginManager.getMojoDescriptor(DefaultMavenPluginManager.java:275)
        at org.apache.maven.plugin.DefaultBuildPluginManager.getMojoDescriptor(DefaultBuildPluginManager.java:239)
        at org.apache.maven.lifecycle.internal.MojoDescriptorCreator.getMojoDescriptor(MojoDescriptorCreator.java:233)
        at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:103)
        at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:83)
        at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:85)
        at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:355)
        at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:155)
        at org.apache.maven.cli.MavenCli.execute(MavenCli.java:584)
        at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:216)
        at org.apache.maven.cli.MavenCli.main(MavenCli.java:160)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:289)
        at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:229)
        at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:415)
        at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:356)
[ERROR]
[ERROR]
Thanks&Regards
Prabhat

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

Help!!!! In configuring deploy services

Similar Messages

Maybe you are looking for