Help in declare field

Hallow I decleare a field like score_sum TYPE p DECIMALS 2, and I dont now how to declare it in my structure in se 11.
regards

Hi,
When you are creating the Structure, just click the Built-in type pushbutton, then it will allow you to enter the Data type , Length
Regards
Sudheer
Message was edited by:
Sudheer Junnuthula

Similar Messages

How to get the F4 help for a field in the selection screen

Hi all,
I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
Thanks & Regards,
Paddu.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

F4 HELP for standard field..

i want to put F4 help for standard field FERTH in mm01 and mm02 ...
is there any way to put F4 help for this field..

try this
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'BKPF'
fieldname = 'BUKRS'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = progname
dynumb = dynnum
translate_to_upper = 'X'
TABLES
dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
FROM BKPF
INTO CORRESPONDING FIELDS OF TABLE it_doc1
WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BELNR'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_BELNR'
value_org = 'S'
TABLES
value_tab = it_doc1.
ENDMODULE. " VALUE_BELNR INPUT

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

Custom seach help for standard field in Web dynpro application

Hi All,
I have a requirement in SRM portal where in I have a to add a custom search help to the 'WBS_ELEMENT' field in the the 'ACCOUNT ASSIGNMENT' tab of the Shopping cart creation screen with some input parameters on the search help.
As the SRM Shopping cartcreation screen is a standard web dynpro application.
Can anyone help me in this regard for addition of search help for a field with some custom fields in the Search help screen.
Any inputs will be very helpful.
Thanks in advance.
Regards,
Ahmed.

Hi Ahmed,
If it is an standard application then you will have to do ENHANCEMENT in the component. And for using customised value help you will have to declare attribute in CONTEXT and dynamically change the binding of the Value property of UI element inside post-method of WDDOMODIFY. You can create your own customised value help for newly added attribute.
Thanks,
Vishesh

How can we provide F4 help for parameter field.

Hi All,
How can I provide F4 help for parameter field.
Regards,
Amar

hi,
different ways of applying search help are :
you can use anyone:
1) CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
or
2)
can follow these simple steps for search help:
go to se11==> put some name after ticking search help radiobutton==> create==>
then tick " elementery search help " and press enter ===>then put description and table name in selection method ===>then put the field on which u want search help
in search help parameter==> tick IMP EXP ==> write 1 in lpos and spos===>save and activate===> double click on table name ===> select that field and press *search help tab* above===> then copy
3 )
methods of applyind search help:
For search help sometimes we use MATCHCODE----->when we apply it directly to parameter or select option.they are obselete now ii.For search help sometimes we CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' ??------->if we want to populate data of internal table as search help.
iii.For search help sometimes we declare tablename-fieldname in selection?------>if that field in that table is having seach help or check table ..F4 will be avaliable directly.
also:
Fixed value of domain can also work as search help.
i hope it will help u a lot
thaks and regards
rahul sharma

HOW to ADD F4 help to a field on SCREEN (MODULE POOL)

Hi,
     How to add f4 help to a field in screen ..plz help
Regards,
Saleha

Hi Saleha,
                In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname     = 'BKPF'
      fieldname   = 'BUKRS'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
    FROM BKPF
    INTO CORRESPONDING FIELDS OF TABLE it_doc1
    WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'TXT_BELNR'
            value_org   = 'S'
       TABLES
            value_tab   = it_doc1.
ENDMODULE.                 " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya.

Help in declartion field in se11

HALLOW
i buield structre in se11 and i wont to declare field
that i get the numbers after divide like 3.25 or 20.25 or 100.55
which data elment i can use?
regards

Hi TAL S,
You can create ur own data element as per the field length in SE11
Create a domain in se11 of data type 'CURR' with length 6 and decimal places 2.
assign this domain to ur data element.
length can be varied as per field value.
For reference check dataelement : NETPR.
Reward points if helpful.
Regards,
Hemant
Message was edited by:
Hemant Goyal

How to delete entries from search help for a field

hi guys
how r u all doing.
i have some questions for u.
1. How can i delete some entries(from a list of many) from search help of a field with out (writing)going to a program.
2.in PA10 (Personnel File),when i try to display data for a pernr,i am getting an error saying that infotype 122 doesnot exist.
3.Again in Pa20,when i try to display data for a custom infotype,it leads me to short dump saying that load program does not exist.
any help in this regard,wud be appreciated.
thanks

Follow this
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
 'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
 'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
 'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
 'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as T528B
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

F4 help for the field enhanced in IT 21 - Urgent!!!!!!!!!!!!!!!

Hi All,
I have enhanced IT 21 with a new field called "Country of citizenship" in custom include CI_0021.
For this i have assigned LAND1 as the domain and the data element. The value table for this is
T005. but the problem is i am not able to get any value in the F4 help for this field in PA30 screen
for IT 21. Please help me in solving this issue. its very urgent.
Rupesh

Hi,
    Use the follwoing function module, you get search help. But you have to pass your table name, field names below.
data: it_itab type help_info,
        rsmdy_ret type rsmdy.
data: it_itab1 type table of dselc initial size 0,
        it_itab2 type table of dval initial size 0.
it_itab-tabname = 'GMGR'.                " Table Name
it_itab-fieldname = 'GRANT_NBR'.         " Field Name
it_itab-MCOBJ = 'GMGRANT'.               " Name of the Search Help
it_itab-TCODE = 'CJ20N'.                 " Transaction Code
& Function Module for calling Search Helps from DYNPRO               &
CALL FUNCTION 'DD_SHLP_CALL_FROM_DYNP'
EXPORTING
    HELP_INFOS         = it_itab
IMPORTING
   SELECT_VALUE       = SELECT_VALUE
   RSMDY_RET          = RSMDY_RET
TABLES
    DYNPSELECT         = it_itab1
    DYNPVALUETAB       = it_itab2
exceptions
    others = 1   .
Pass the search help value to a temporary variable
l_temp = select_value.
Hope it helps you.
Regards,
CS.
Note: Reward points if helpful.
Edited by: CSY on Mar 19, 2008 4:51 PM

F4 help for a field in module pool

Hello Experts,
I need to provide f4 help on field sales office(VKBUR) in my module pool program.
I have searched forums about it. but all forum contains either doc. no or customers etc.
these field are directly available on table, so very easy to find.
But for sales office, how can i provide f4 help. there is no straight entries in tables like for this company code this sales office.
so its getting difficult for me to provide help.
so if anybody know the solution plz help, and if anyone know table where all sales offices are stored, i will be thankful.
Thanks,
Amar

Hi amar_war,
use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
H_TVBUR has no more parameters, it will display a list of al sales offices with description text
H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
Try standard search help for standard field first.
You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
Regards,
Clemens

F4 help for a field in item table in a view cluster

Hi All,
I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table.
F4 should have only values fetched based on the header table entry.
How can i achieve this. Please suggest.
Regards,
Kusuma K.

Hi amar_war,
use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
H_TVBUR has no more parameters, it will display a list of al sales offices with description text
H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
Try standard search help for standard field first.
You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
Regards,
Clemens

F4 help for a field in UI(CRM 5.1)

Hi All
Can anybody tell me how to do F4 help for a field in UI( CRM 5.1). scenario is given below.
I have 2 customer fields added to UI using EEW and have custom table for maintaining field values. need to add F4 help for field1 ( field1 and field2 values needs to be displayed in F4 help list) and field2 should get value when we hit the particular entry from field1 F4 help list.
thanks in advance.

Hi,
 You can implement the Get_V* method for the field1 attribute and use the following code to populate both field1 and field2 as output paramters for your F4 help.
DATA:
 ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
 lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
 lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = '<STRUCT.field1>'.
ls_map-f4_attr = 'field1'.
APPEND ls_map TO lt_outmap.
ls_map-context_attr = '<STRUCT.field2>'.
ls_map-f4_attr = 'field2'.
APPEND ls_map TO lt_outmap.
<fill the lt_inmap (input parameters) as per your requirement>
 CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
 EXPORTING
 iv_help_id = '<your search help id>'
 iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
 iv_input_mapping = lt_inmap
 iv_output_mapping = lt_outmap.
Note: In your DDIC search help, define field1 and field2 as output parameters in SE11.
Reward if it works!
Thanks,
Sudipta.

F4 help for address field

Hi,
In BP_CONT component, for address field I need to provide F4 help. And the F4 should contain the addresses with separate fields as (city.street,country).On selecting the row the data should flow as concatenated manner to the address field.
Please provide some idea to achieve this.
Thanks.

Hi Ginger,
I would like to add what Vinamra has said, you need to create a search help through se11 transaction. As per your requirement you need to map address field of the selected row to different fields in UI.
In search help we have IMPORTING(IMP) and EXPORTING(EXP) Fields or parameter.
Lets take a simple example, suppose you have three address field house no, street and city. Now you would like to apply F4 help on CITY field so you need to choose CITY field as IMPORTING and EXPORTING parameter in your search help and other fields like HOUSE NO and STREET as EXPORTING parameter only.
Now following code you need write in GET_V_CITY() method
DATA:
   lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
   ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
   lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.CITY'.
   ls_map-f4_attr      = 'CITY'.
   APPEND ls_map TO: lt_inmap, lt_outmap. " map to input and out
ls_map-context_attr = 'STRUCT.HOUSENO.     " Context node attribute
ls_map-f4_attr      = 'HOUSE_NO'.                    "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
ls_map-context_attr = 'STRUCT.STREET.     " Context node attribute
ls_map-f4_attr      = 'STREET'.                     "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZSH_ADDRESS'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
May this will help you.
Regards
Ajay

Help in declare field

Similar Messages

Maybe you are looking for