Help in finding info objects

can any body tell me easy way to find charecteristic and keyfigure infoobjects of MM,PP,FI in help document.
specificly i am not finding infocubes of MM in help document. my mail id is [email protected]

Hi,
Check these links:
check BI Best Practice V3.35
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
MM-Purchasing
http://help.sap.com/bp_biv335/BI_EN/html/BW/PurchAnal.htm
InfoCubes
Purchasing Data (technical name: 0PUR _C01)
Vendor Evaluation (technical name: 0PUR_C02)
Purchasing Groups (technical name: 0PUR_C04)
PP
http://help.sap.com/bp_biv335/BI_EN/html/BW/ManufactAnal.htm
InfoCubes
Plan/Actual Comparison Order/Material View (technical name 0PP_C01)
Plan/Actual Comparison Operation/Work Center View (technical name 0PP_C03)
Plan/Actual Comparison Material Consumption (technical name 0PP_C05)
Period-Specific Order/Material View (technical name 0PP_C02)
Period-Specific Operation/Work Center View (technical name 0PP_C04))
Period-Specific Material Consumption (technical name 0PP_C06)
Capacity Load Utilization (technical name 0PP_C13)
Status of Manufacturing Orders (technical name 0PP_C10)
Bye
Dinesh

Similar Messages

  • How to find Info objects for particular filed??

    Hi
    I hav doubt Can anyone tel me???
    My Query s <b>How to find Info objects for particular filed??</b>
    For example i hav some table fileds, how to find Info objects for that fields??
    Pls explain me detaily
    Points wil be given for all answers.
    Thanks
    Senthil

    Hi Senthil ,
    You have your field description along with your Field right.
    For example:MATNR - Material Number
    Now take this description and go to your BW side Tcode:RSA1
    1)Search in Modelling >> Infoobjects >> Material Number
    Then you get few hits (matches)  which have description matched.
    For Example: 0material  - Material Number
    Check for the Length and type match.
    You will understand once you get those hits as to which is related to yours.
    2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much  though).
    3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
    Hope your doubt is cleared atleast to some extent.
    Assign Points if helpful.
    Thanks,
    Priyanka

  • Setting  of Search help(F4) in Info Object on BI Syatem

    Hi Guru's,
    Please find requirement,
    In R/3->
    There are 3 fields displaying upon cliking of F4 search help for a particular field.
    for ex: Display of 3 fileds are material no,description,created date for field material no.
    But on BI only material no is displaying,so through generic extract,I tried to get descriptiopn and created date for IO material no.
    whether these feilds can be displayed automatically upon cliking F4 search help on Material no, or do i need to do any setting on BI system.
    Thanks In advance,
    Sree.

    Hi Sreedhar,
    Please follow below steps:
    1.) T-code RSD1, get into your Material Info-object edit mode
    2.) Get into attributes tab.
    3.) Click on Detail/ Navigation attribute
    4.) Goto fourth column from left " Order For F4 Help".
    5.) Changes the values in this column, this column determines which attr is to be displayed ony our F4 help.
    Please note value "0" indicates that the particular attr will not be dispalyed in F4 help. By default "0" is assigned in this field.
    Let me know if it helps.
    -Amit

  • Unable to find info object for J_3ASTAT

    hello,
       can some one help me find the info object name for the field J_3ASTAT  for table  J_3ABDBS.

    Hi Akash,
    To find the BW fields for the corresponding R/3 fields on the BW side use the table RSOSFIELDMAP and also use the table RSOLTPSOURCE.
    Hope this helps.
    Bye
    Dinesh
    (Do not forget to assign points!!) ...

  • Multiprovider: Info object not available

    Hello Experts,
    When iam creating a MP, unable to find Info Object in the selection screen.
    IO is activated and also done "Generate Export Data Source"
    plz help.
    KV

    Hi KV,
    Just a thought, if you are refering to navigational InfoObjects and you do not see it available in the Multiprovider/Infocubes it is most likey maked as an 'attribute only' infoobject.
    to make availble in Infoprovider uncheck this on the InfoObject.
    regards,
    CH

  • Info object catalog

    Hi
    I am using BI 7.0 and when an info area is created and then I give a right click in the context menu, I don't find info object catalog..what could be the reason?
    Thanks
    Dora

    Hi Dora,
    May be you are doing it in the Infoprovider level.Do it at Infoobject level.
    Goto-RSA1->Infoobjects--->Select your Infoarea-->Context menu->Create Infoobject Catalog.
    Hope this helps
    Regards
    Karthik

  • F4 not working for info object in web analyzer

    Hi Everyone,
    We have one report, the F4 is working fine for info obect in BEx analyzer but in case of Web analyzer  the F4 is getting stuck for the same info object.
    Can you please suggest what steps I need to follow to correct it.
    Thanks
    Kind Regards
    Anukul

    Hi Everyone,
    Yes, value help for variable.
    One of variable info object of query, the variable shows the value help in BEx analyzer but in Web analyzer it does not shows the value help for same info object.
    When we press F4 in web analyzer for that info object, the screen is getting stuck for long time and not shows any values against that variable.
    Please suggest experts, what actions need to take.
    Thanks
    Kind Regards
    Anukul

  • Finding list of reports with diff info objects

    Hi,
    I have two info objects. I want to know the list of the reports which contain these two info objects. Please let me know how can I proceed further.
    Thanks:SMS

    Hi,
    Goto RSA1 --> Metadata Repository --> Infoobject catalog and find the required infoject and just click on the object, in next screen you can see all the reports which are using this infoobject.(InfoObject Directly Used in These Queries:List of Queries )
    hope it helps...
    regards,
    Raju

  • How to find master data info objects. Partner function and customer class.

    hi,
    Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
    I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
    pls reply

    I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
    However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS.  They are both set up as 2 CHAR.  That is not to say that you should also.  You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER.  KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3.  When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
    As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER.  VBPA contains the business partners associated with Sales documents.  So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
    Hope this helps.

  • Finding matchcode object help

    how to find matchcode object of a field which is already exizted in se11.
    for eg. i want to find matchcode object of a field Parnr from table IHPA.
    regds

    Hi,
    PARNR from IHPA doesn't associated with any search help/match code.
    YOU can find two ways whether a search help is associated with a field .
    1.SE11->Table->IHPA->Click on Entry Help/Check -> select the field(PARNR) click on Search help button, if a search help is available it will display.
    2.SE11->DataType->PARNR(display)->Click on Further Characterstics tab-> here you can see the search help associated with it.
    <i>Hope This Info Helps YOU.</i>
    Regards,
    Raghav

  • How to find the corresponding  field in r/3 to a info object in a cube?

    Hi,
           In a cube I have an info object WKNO and data is loaded from r/3 through  a process chain to that cube.
    now i need to check from which field and table in r/3 the data is coming to the info object?

    Hi
    You can take the datasource name for the Cube and the infoobject
    Then pass this to table RSOFIELDMAP , to get the corresponding  R/3 fieldname
    And for R/3 table u need to check datasources definition in BI content library
    May b if ur datasource is there in below the link u can follow the tables to get the exact field source
    https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
    Hope this helps
    Sonal.....

  • Need help for finding objects impacted by size change for an infoobject

    hi all,
    need help for finding objects impacted by size change
    for xxx infoobject, due to some requirements, the size to be changed from
    char(4) to char(10), in the source database tables as well as adjustment
    to be done in BI side.
    this infoobject xxx is nav attribute of YYY as well as for WWW
    infoobjects. and xxx is loaded from infopkg for www infoobject load.
    now that i have to prepare an impact analysis doc for BI side.
    pls help me with what all could be impacted and what to be done as a
    solution to implement the size change.
    FYI:
    where used list for xxx infoobject - relveals these object types :
    infocubes,
    infosources,
    tranfer rules,
    DSO.
    attribute of characteristic,
    nav attribute,
    ref infoobject,
    in queries,
    in variables

    Hi Swetha,
    You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
    How to adjust tables :
    Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
    Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
    NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
    How to collect the changes in TR:
    You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
    Hope it helps!
    Regards,
    Pavan

  • Datsource /CRMBW/CODEC_TEXT : Need to find Corresponding Info Object

    Hi BW Experts,
    I just want to identify the corresponding info object for this datasource.
    /CRMBW/CODEC_TEXT
    Can anyone tell me how to find the corresponding info Objects for this datasource.
    Thanks,
    shahina

    I'm not sure about the /CRM part, but in BI you might want to try 0CODEC.

  • Help to find out some of the object model for InDesign preference

    Hi All,
    I'm writing script to update the specific client preferences for each and every preferences of InDesign CS5. I couldn't find some of the object models in Extendscript help. If someone knows, please help to find out this.
    These are the list. Also refer screenshot.
    1. Dictionary Preference - Language English: USA
                                          Hyphenation
                                          Spelling
                                          Double Quotes 
                                          Single Quotes 
    2. Autocorrect Preference - Language English: USA
    3. File Handling Preference - Default Relink Folder
    Many thanks in advance.
    Peru.

    I looked and was not able to find a way to do this.

  • How can we find out the info object in a query ....?

    How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

    Hi,
    If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
    Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
    For characteristics you will have to look for identification tab in the characteristics option.
    Thanks

Maybe you are looking for