Help in fm lock order

Hi
i look for Fm that lock order ( vbak )
Thanks
Have a nice day

FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html

Similar Messages

Why lock-order can use in cascade delete?

Hi.
http://edocs.beasys.com/wls/docs81/ejb/DDreference-cmp-jar.html#1113798
#Function
#Use this flag to specify the database locking order of an entity bean
#when a transaction involves multiple beans and exclusive concurrency.
#The bean with lowest number is locked first.
#This flag should only be used to prevent a deadlock situation and,
currently,
#only applies when a transaction performs cascade deletes.
#This flag is only used for cascade delete currently.
Why lock-order can use only cascade deletes sisuation?
This is fake fuction ins't it....
Makoto Shibata

I'm not sure that I understand what you mean by 'fake function', but
as I recall, the reason why this feature works for cascade delete is because
the feature was specifically introduced because deadlocks were detected
when using cascade delete in heavily concurrent environments.
-thorick

HT201210 i need help restoring a locked ipod

i need help restoring a locked ipod touch

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Question about locking order during merge statement

Dear all.
I have a merge query with a decedent hint to prevent deadlock with another queries.
Another queries use select ~for update with same hint.
My question is that the locking order will follow the hint in this query?
Or I might use the select ~ for update before this merege.
Please give any advice about select ~for update and locking order in the query.
Thanks.
MERGE INTO A
USING
     (SELECT /*+ index_desc(C index_key) */ *
     FROM
         C
      WHERE key > :start and key < :end
    ) B
     ON ( A.KEY = B.KEY )
WHEN MATCHED THEN
     UPDATE
     SET A.v1 = B.v1

What you are doing is not going to prevent a deadlock in your, as yet, unknown version of Oracle. Reading an index does not cause deadlocks. Trying to alter an uncommitted row does.
I would suggest you code this correctly by doing a SELECT FOR UPDATE WAIT <seconds> in all transactions.
http://www.morganslibrary.org/reference/deadlocks.html#dlfu

I need to factory unlock my iphone help! it locked on orange espana

i need to factory unlock my iphone help! it locked on orange espana

Stop into any of the hundreds of Orange shops around the country.
Or chack their help boards.
Or use their live chat.

Query help needed for Sales order panel user field query.

I have a user defined form field on sales order row level called = U_DEPFEEAMT
1, I would like this field to get the value from a field on this sales order row level multiplied by what is in point 2 below. The details of field in point 1 is :
Form=139, item=38, pane=1, column=10002117, and row=1
2. The contents in field 1 should be multiplied by a value coming from another user field linked to OITM master item.
The details of user field attached to OITM is :
OITM.U_DepositFeeON
Appreciate your help.
Thank you.

Try this one:
SELECT T0.U_DepositFeeON*$[$38.10002117.number\]
FROM dbo.OITM T0
WHERE T0.ItemCode = $[$38.1.0\]
Thanks,
Gordon

Help needed in showing Order Quantity in Quantity contract

Dear, Gurus
I know it is possible to show the Target Quantity and Order Quantity both in the Display view of my quantity contract. It is said that you have to click the update document Flow which I know I have done in copying control. But no matter how many release orders I make the only thing displaying in my contract is still the Target Quantity and I want the Order quantity to also show but it isn't. I am using Item cat Tan for my Release Order and Item Cat KMN for my Quantity Contract.
i have copied OR to ZORS (Release Order) and CQ to ZCQ.
Copying Control
Target is my Release Order Source is my quantity Contract
copying Req is 301
pos/neg quantity is +
copy schedule line is checked
copy quantity is A
Pricing Type is G
X=Update document Flow.
Please help.

Dear Mr. Jimmy,
Thanks for the reply. I tried writing the query in the stored procedure but its not working.
It would be grateful if someone can send me the query for this to put in the Transaction Notification.
Regards,
Bharath S

Help me on sales order history,

hi all,
i need to develop a report on sales order history,
please help me, what are the related tables to get sales order history

the SAPGUII cannot help you on this.
you should refer to the ERP-SD forum at SAP ERP Sales and Distribution (SAP SD)

Help ! To Lock The Position Of a JFrame ?!!

hi..
How can i lock the Position of a JFrme..
my requirement is to lock the position of a JFrame.. so that it cannot be dragged on a screen.. but must be resizable... is that possible ?
any suggestions ??
Thanking You in advance...
_rG.

well sorry..
i guess you are speaking with respect to windows ..
well i left out to tell ya..
i'm working on a macintosh..
so i need the requirement as per the client to lock its position but not the size...
the desktop on a macintosh can be viewed else with short keys..
any help ?!!
_rG.

Help, I have locked myself out of my macbook air and there seems to be no way back on.

I have literally just got my first mac computer today (a macbook air) having previously been a PC user. Needless to say, I am not familiar with how to use them at all and am pulling my hair out here trying to work out why I have been locked out after just 5 minutes of using it.
I guess there must have been a setting on it to automatically log me out after a certain amount of time as I left my computer for a while before returning and came back to a login screen. It is now prompting me for a password to get back into my mac - even though I didn't even set one! When I click the ? button, it says i should go to appleid.apple.com to reset it from another device, but I have tried this and all it allows me to do is reset my Appleid - not my computer password. (By the way, have also tried typing in appleid password with no luck.)
Has anyone got any tips? I have tried running multiple internet searches across the forums and have found nothing even remotely close to helping me. It seems so ridiculous for something so simple - especially as i never even set a password!!!
Any help much appreciated - I am on the verge of throwing this machine across the room and I've only just got it.

Did you purchase your MacBook Air new? Do you still have its box? Locate its serial number and telephone Apple at the number shown at the bottom of this page (1-800-MY-APPLE if you're in the U.S.). They can help you.

Help needed in sales order/ quality management

In standard sap it is possible to assign an inspection to the delivery type. But client wants a non standard sap inspection to be done at time of order. is it possible? If it is please do help me in customizing this. Thank you in advance.
M. Ali

hi,
Please try table VBFA with fields VBELV = <sales order> and VBTYP_N = 'J' (Shipping/Delivery).
and also try this also
if you know delivery number for order ,then you could use FM VTTP_READ
if you need delivery number from sales order then use VBAP-VGBEL
pass delivery number to FM or pass the value to VTTP Table
thanks,
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Help needed in Process Orders

Dear All
I have to track changes made in Process order in transaction COR2. I have the user exit, but I dont know which field would hold the changed value.
Can anybody help.
Points for sure..
Regards
Dinesh

Solved on my own

Help-Want to lock Time Machine back-up from being deleted

Hello there,
I used to have a macbook pro from november of 2006 that was loaded up with data from graduate school. As it was getting quite old, I wanted to get a newer laptop and chose the macbook air for many reasons. However, it doesn't have nearly as much storage/memory, so I could only transfer a fraction of the data files from my old laptop (pro) to the new one (air).
I am currently using TimeMachine to back up everything to a 4 terabyte external hard drive. Even though I originally transferred all the data via this drive and had a mirrored back up of everything in its entirety from my old macbook pro, now when I view the external hard drive only my macbook air is listed under Backups.backupdp.
I can still view all the original data and files from the macbook pro in my oldest back up, however, as I begin to fill up the hard drive I worry that this back up might eventually get deleted. Is there anyway to specifically cordone off this back up so that it is never deleted? I essentially want to lock it but am unsure if this is even possible, let alone how to do it.
Any help you could provide would be greatly appreciated. Thank you so much!!
All my best,
pyo_pyo

I think I follow your post..
AFAIK there is no way to stop TM from eventually deleting the material from the oldest backup.. Indeed just hoping that the data is stored until the drive is full is not necessarily going to work.
You need to have another storage and copy the backups.backupdb to it. Store this drive in a draw somewhere.
Do you still have the old laptop . if so do not do a TM backup of it. Do a direct disk image plus copy and paste and perhaps TM as well.. of all the files and store that. Much easier when you later need access to a file to get it direct rather than extract it from a backup.
1TB drives are now so cheap .. if the data has any value to you. Go and buy one or two.. spread it around. Store offsite. If anything is valuable it is valuable to store offsite as well.

Who can help me with my ORDER?!

I had made an online order for my iphone 5s on 11/15 online. It showed that will be delivery by 11/19. I had recived the email with conformation # as quickly, but it always show "being processed, check it back tomorrow" in my order status. I have checked the local store, and they have the device in stock. So, I may want to cancel the order and get it in local store.
However, I called to the customer serving for all day. They always told me to transfer me to another department. The only time, they said it would not cancelled during the status was being processed and also do a transfer to another deparmenrt. but There is always being No Agents Avilable for each time!!
The chat live will not help you to do anything, except provide a phone number and let you call them.
Now, my status still not changing, and I have no idea to who i can communited with this issue.
Who can help me ?? How can I cancel it or to know anything about my order without only waste time for waiting and calling.

>Post deleted to remove personal info<
MODERATOR COMMENT: This is a public peer to peer (customer to customer) Community.
Please call 800-922-0204 concerning your order
Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone
Message was edited by: Verizon Moderator><

HELP! Photos locked and can't delete in Windows 7/PSE8

Hello,
Appreciate any and all help! Not a computer gal.....
Have a 3 day old Dell Studio XPS 8100 with Windows 7.
Using an external drive transferred from my former Dell.
Loaded new Photoshop Elements 8.
Can access and edit my photos just fine...
but when I go to delete a photo and/or override a photo with an edited version, I get an error message that
MY FILE IS LOCKED.
HELP???
Deal with thousands of photos a month--don't have time for another step--just need to delete or save and delete former version.
Talked with Dell and Microsoft but they claim I need to "buy software support."?!?!?!?!?
The Microsoft guy seemed to imply that there is some fix --and the Dell guy thought there was some security thing in WIndows 7 preventing the deletion.
Please...any ideas!!! Spent HOURS on this already!
Thanks,
Krista in Chicago

I had the same problem. I am not exactly sure which changes that I did were the actual ones that solved the problem but here is what I did. I went to the highest folder (in my case the whole drive) in Windows Explorer (The Folder icon) and right clicked on the drive to get the Properties dialog box. I then selected Security. I highlighted Everyone and clicked on Edit and then gave Everyone permissions for everything (probably laying my drive wide openfor any viruses floating around). I also found that all of the files and folders were marked Read Only so I removed that from all files and folderss. That seems to have solved the problem. This solves the immediate problem. I am not sure if this is what is recommended for security purposes.

Help in fm lock order

Similar Messages

Maybe you are looking for