Help in istallation of ACS 4.0 on windows server

plz let me know how to istall acs server on windows server ,

Hi,
Following link can help you install ACS on windows server:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs40/install/install.htm
Hope this helps
~Rohit

Similar Messages

User-changeable Passwords issue f/ ACS 4.0 on Windows Server 2003

I am having an issue with the UCP website not functioning correctly. I have installed it from the ACS 4.0 CD, following the instructions from the Cisco.com website, but cannot get past the Login page. Users can get to the Login page, but after they enter their information (username / password) and click Login, the server returns the following error page: "CGI Error. The apecified CGI application misbehaved by not returning a complete set of HTTP headers."
I cannot get past this page. I have verified that the website is installed as outlined in the Cisco procedure, and have re-installed twice to verify. I have granted Everyone Write and Execute permissions to the site directories, and granted the Virtual Directories Script and Executable access.
Any help on this would be greatly appreciated. I am evaluating ACS 4.0 for deployment in our company, and UCP not working is a major stumbling block.
Additional configuration information:
Windows Server 2003 SP1, patched current to 8/29/06
The ACS server is also running on this server; it was installed and tested first, before installing UCP.
Thanks,
John

Change the user that runs CSusercgi.exe to Administrator.Refer the following steps Install UCP 4 on a machine that runs IIS server,Open IIS manager,Locate Default Web Site, Double click on the virtual name 'securecgi-bin',Right click on CSusercgi.exe and choose Properties,Choose 'File Security' tab,Choose 'Edit' in 'Authentication and access control' area,Change username from IUSR_ to 'Administrator' and enter his password.

Need help getting filezilla ftp to work with a windows server

Trying to connect to a windows based server through FTP, I've downloaded Filezilla when I launch it takes several minutes to ask me for a address and username... I input but nothing happens. I would like to use MAC ftp option but I'm not sure it works upstream like I want it to...
Please Help.
J.
Message was edited by: MindBlendMedia

This doesn't appear to have anything to do with Apple Remote Desktop, Apple's application for managing networked Macs, so this probably isn't the most appropriate forum for this question. I'd suggest you ask in the Mac OS X 10.4 Networking forum; you'll be more likely to get a quick and accurate answer there.
Regards.

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

ACS any Version with Domain Controller on Windows Server 2008 R2 64bit

Hi All
Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?
Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.
I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
Thanks
pato

Hi AllIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our
server stuff has recently upgraded the Domain Controllers to 2008r2 and
turned off the 2003 servers. This didn't make our ACS 4.1.4 really
happy.I've read now serveral posts regarding issues with ACS and
Server 2008r2 and hope to find a solution (besides switching to LDAP,
yukk).Thankspato
Hi Pato,
Just check out the below link hope that help.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
As per the link it says The support for Windows Server 2008 is applicable for ACS 4.2 Patch 4 onwards.
Hope to Help !!
Remember to rate the helpful post
Ganesh.H

Delete proxy config on Cisco Secure ACS 4.1 for Windows ?

We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2.
We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
pressed the Network Configuration button,
saw the Proxy Distribution Table
clicked (Default)
moved ACS1 from the AAA Servers column to the Forward To column.
So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.

Hello Jeffrey,
By default the ACS 4.x Proxy Distribution Settings should have the ACS entry for itself on the Forward To box. Your ACS1 entry should be on the Forward To box.
The Internal Error message on the ACS should be highligthing a different issue on your ACS1. Also, the message stating that we cannot have zero servers on the "Forward To" box is expected.
Set your ACS1 for Full Logging Detail (System Configuration > Service Control) and configure the ACS1 entry under the Forward To box. Recreate the authentication issue and collect a package.cab file. If you have an ACS for Windows, under the ACS Installation folder look for the CSAuth folder > Logs and share the auth.log file with a failure timestamp for us to review the ACS logs when failing with Internal Error.
If this was helpful please rate.
Regards.

Please help - Connection Refused - Mac to Windows Server 2012

I have downloaded MS Remote Desktop onto my brand new Macbook Air OS X and have tried to connect to my school network - which when logged in says it is "Windows Server2012"
However each time I try to log in it simply says connections refused. Nothing more.
Not sure what I can do next.
Thank you for any help,
Laura

Hi Laura,
Thank you for posting in Windows Server Forum.
Are you trying to remote desktop with IP address or hostname?
Please try both alternate way and check is there any difference between them. Also as suggested by Manouchehr Omari, please see that you have remote desktop enabled on server 2012 and related RDP port (3389) opened for remote connection to take place under
firewall setting. If possible for a try disable firewall and check. You can get more troubleshooting information from beneath link.
Remote Desktop Client on Mac: FAQ
http://technet.microsoft.com/en-in/library/dn473006.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Recommend a good reference book and helpful links to configure ACS 5.x

Hi Experts,
I am new to Cisco ACS, Can anyone recommend me a good reference book and helpful links which will help me to configure ACS 5.x
Thanks In Advance
Kiran Kumar CH

Hi Klaus,
I found the Cisco Press book "AAA Identity Management" to be a good reference when I was getting started with ACS 5.x.
http://www.ciscopress.com/bookstore/product.asp?isbn=1587141442
Good luck,
Nate

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

CA certificate issue in ACS 4.0 for Windows

Hi,
How to generate lost private key .pvk file on ACS which is also configured as CA Server, As I would like to register all the available ACS's Servers to CA Server using the same certificate from CA Server. Need a step wise procedure on obtaining certificate from ACS CA server.
your kind response will be of great help.
Thanks in advance
Best Regards,
Ahmed

Windows Server 2003 with SP1, Enterprise Edition, is used so that auto-enrollment of user and workstation certificates for EAP-TLS authentication can be configured. This is described in the EAP-TLS Authentication section of this document. Certificate auto-enrollment and auto-renewal make it easier to deploy certificates and improve security by automatically expiring and renewing certificates.

ACS 3.2 for Windows and MS Windows AD Directory Integration Problem

Dear all,
We have some issues while integrating Windows AD with ACS 3.2 for Windows.Currently we have done the following:
1. Installed ACS 3.2 for Windows on Windows 2003 Enterprise with SP1
2. ACS and Domain Controller are configured on the same server
Checked and verified the following configurations
1. created a domain user "csacs" selected Act as a part of operating system and log on as a service enabled for this user.
2. Enabled all the CS services to log on as a user csacs.
But I noticed CS services are not respdonding and gives the error as "Could not able to start the service with service specific error ..." while trying to start services manually on ACS.
Kindly help me through this integration part
An easy and handy Step wise procedure on configuring integration of AD with ACS 3.2 on both Domain Controller and on Member server will be of great help.
Thanks
Kind Regards,
Ahmed

I have no issues running Cisco ACS version 3.2 on Windows
Server 2003 with SP2:
1) create user test1 in MS Active Directory and put test1
in users group with dial-in access granted,
3) Create a group called "LDAP". Actually I renamed
group name "group 1" to "LDAP".
3) in ACS external user database configuration, I specified
domain "CCIE" as for this. unknow user policy is to use
Windows Database configuration,
4) Configure the database configuration in ACS to point
to "CCIE" windows domain,
5) setup the ACS to authenticate one of your Cisco devices
and log in using the MS windows account,
By the way, mgurwara, you are wrong. I run Cisco
ACS 3.2 on windows 2003 Enterprise Edition with Service
Pack 2. I am running it on a Dell Optiplex Gx240
(1.7 GHz with 512MB of RAM) and it is running fine.
I use it to manage about 20 cisco devices and
about 200 Wireless LEAP user(s). Furthermore, I am also
running ACS 4.1 on another identical hardware. It has
nothing to do with the hardware. I don't know where
you get that information from.

ACS 4.0 and Windows 7.

Facing challanges in integrating ACS 4.0 with Windows 7. Please help.
Is ACS 4.0 with Windows 7 compatibility?

have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
Basically you have to make yourself a copy of your Windows disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
Hope it helps
Stefan

ACS 5.1 for Windows VM Ware

Hello,
Please help me...
I want to know can we install ACS 5.1 in Windows VM Ware machine. I have downloaded it but it is giving me the option of installation in Linux.
Please suggest.

Ravi,
This release of ACS 5.1 provides new architecture and functionality on a standard Cisco Linux-based. We would be requiring a new box all together for 5.0.
Installing ACS on VMware virtual machine
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_vmware.pdf
ACS 5.1 doesn't support windows OS.
HTH
JK
-Do rate helpful posts-

ACS 5.1 with Windows Active Directory

Hi All,
I installed ACS 5.1 in vmware server successfully. I have problem while intergrating cisco acs with microsoft Windows 2008 active directory. I already verfied all the related parameters like Domain name, user rights to join in AD, DNS name resolve and IP-Address.
But, I can able to add any system into my domain without any issues and this is not happening in Cisco ACS 5.1 version.While testing the Active Directory - Test connection it prompts with error message " Can not resolve network address".
Please help me from this issue.
Regards
Mani

Hi
Have you setup the correct DNS servers and domain name in the ACS and also do you have an entry in the DNS for the ACS server?
Dave

Configuring Tacacs+ using CiscoSecure ACS 4.2 on Windows

I have installed CiscoSecure ACS 4.2 on Windows.
Can anyone help me setting up the server for Tacacs+.
I am new to Tacacs+.
I have to deploy Tacacs+ on almost 50 switches.

i changed device to be cisco 3650 , also i changed network so now ACS and cisco device are in same network 192.168.253.0/24
i get on acs
Date Time Message-Type User-Name Group-Name Caller-ID Network Access Profile Name Authen-Failure-Code Author-Failure-Code Author-Data NAS-Port NAS-IP-Address Filter Information PEAP/EAP-FAST-Clear-Name EAP Type EAP Type Name Reason Access Device Network Device Group
10/10/2014 05:06:06 Authen failed vlada22 Default Group 172.21.1.6 (Default) Users Access Filtered .. .. tty1 192.168.253.25 No Access Filters Passed. .. .. .. .. test123 ..
10/10/2014 05:06:26 Authen failed vlada22 Default Group 172.21.1.6 (Default) Users Access Filtered .. .. tty1 192.168.253.25 No Access Filters Passed. .. .. .. .. test123 ..
from Cisco ;
*Mar 1 00:23:16.711: AAA/ACCT/EXEC(00000004): Pick method list 'default'
*Mar 1 00:23:16.711: AAA/ACCT/SETMLIST(00000004): Handle 0, mlist 05600CB0, Name default
*Mar 1 00:23:16.711: Getting session id for EXEC(00000004) : db=535F824
*Mar 1 00:23:16.711: AAA/ACCT/EXEC(00000004): add, count 2
*Mar 1 00:23:16.711: AAA/ACCT/EVENT/(00000004): EXEC DOWN
*Mar 1 00:23:16.711: AAA/ACCT/EXEC(00000004): Accounting record not sent
*Mar 1 00:23:16.711: AAA/ACCT/EXEC(00000004): free_rec, count 1
*Mar 1
sw1_EX-3560LabRS-B# 00:23:16.711: AAA/ACCT/EXEC(00000004) reccnt 1, csr FALSE, osr 0
*Mar 1 00:23:18.716: unknown AAA/DISC: 9/"NAS Error"
*Mar 1 00:23:18.716: unknown AAA/DISC/EXT: 1002/"Unknown"
*Mar 1 00:23:18.716: AAA/ACCT/EVENT/(00000004): CALL STOP
*Mar 1 00:23:18.716: AAA/ACCT/CALL STOP(00000004): Sending stop requests
*Mar 1 00:23:18.716: AAA/ACCT(00000004): Send all stops
*Mar 1 00:23:18.716: AAA/ACCT/NET(00000004): STOP
*Mar 1 00:23:18.716: AAA/ACCT/NET(00000004): Method list not found
*Mar 1 00:23:1
sw1_EX-3560LabRS-B#8.716: AAA/ACCT(00000004): del node, session 3
*Mar 1 00:23:18.716: AAA/ACCT/NET(00000004): free_rec, count 0
*Mar 1 00:23:18.716: AAA/ACCT/NET(00000004) reccnt 0, csr TRUE, osr 0
*Mar 1 00:23:18.716: AAA/ACCT/NET(00000004): Last rec in db, intf not enqueued
sw1_EX-3560LabRS-B#
*Mar 1 00:23:38.480: AAA/ACCT/EVENT/(00000005): CALL START
*Mar 1 00:23:38.480: Getting session id for NET(00000005) : db=535FF14
*Mar 1 00:23:38.480: AAA/ACCT(00000000): add node, session 4
*Mar 1 00:23:38.480: AAA/ACCT/NET(00000005): add, count 1
*Mar 1 00:23:38.480: Getting session id for NONE(00000005) : db=535FF14
sw1_EX-3560LabRS-B#

Help in istallation of ACS 4.0 on windows server

Similar Messages

Maybe you are looking for