HELP IN KEITHLEY output source PROGRAM!(how to change GPIB to serial port)
As the topic suggest,can anyone help me in changing from GBIP to serial port?The file is found inside the .lib that i attached.
filename:2400 swI Linear Stair MeasV - LED.vi
thanks!
Attachments:
KEITHLEY PROGRAM.zip 434 KB
zzz(yawn)!!!!!! I did not expect people to help me COMPLETE my work;i was just seeking advice on small portion of that program.Isn't what forum is used for?For posting questions and seeking advice from professonals and those willing to help?If you're just idling around here and doing stupid things just to show that you're an active forum user,i would think that you're a pathetic fool that have no life.Please seriously re-consider your words CAREFULLY next time before you post stupid things.Thanks=D
PS:btw i did try out the program;if not how can i ask a question?You expect the question to just pop out of my brain without thinking?and thanks the person for giving me INVALUABLE advice(the person before that lame "nyc aka joker") as it did worked,and i'm still trying out the test.Thanks for it again=D
Similar Messages
-
How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can doHow to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM -
How to change the default apex port
hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
How to Change the Default SSH Port from Terminal ?
How to Change the Default SSH Port from Terminal ?
How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
How to change Firewall remoted desktop port?
How to change Firewall remoted desktop port
I have changed the listening port in the registry.
I added a rule for incoming for RDT.
I can find the rules, and other items in the Firewall lists.
But I cannot find how to edit to change the port number.
Other threads indicate just added an open port not designating RDT as the program.
Guidance please.>So, when inserting a new rule and choosing RDT from the program list automatically inserts the default port number?
My fault. You should not select RDT from the program list, but instead
select the radio button for port, then click next, select TCP, and add in
the port number, then next and continue on with setting allow connection
and then when does this rule apply.
Bob Comer -
Hp dc 7800 how can i install pci serial port driver on windows 8.1
hp dc 7800 how can i install pci serial port driver on windows 8.1 please help
This question was solved.
View Solution.Hi:
Download and install the W7 AMT driver.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&sp... -
Win10 blurry fonts/programs | How to change the accent color?
Hi,
Recently I installed Win10 Build 9926 on a virtual machine for testing and feedback and I am havin' some problems...
First, I changed the Display settings to 125% and now the third-party Win32 classic apps are looking blurry... [Sorry, i can't provide a image link]
Second: The Personalization "pane" (Sorry, long time mac user) only has options for the lock screen and now I dont know how to change the accent color...
And this, I can keep with it, but I made a registry tweak to enable the start screen but now when I use it the taskbar is still there!!! ANNOYING!
Any help will be appreciated...
Thx,
TiagoHi,
I made a test in our testing enviroment, found that when this problem occures,
Sign Out current user and login again would be helpful to resolve this problem. Please take this method as a workaround temporarilly.
Second question, to modify backgound color, you can access system personalize to modify the color:
Roger Lu
TechNet Community Support -
Can anyone help me, please.... crunched for time, and need to know how to change my mp4 purchased itunes into mp3 format to play in windows movie maker? Thanks!
need to know how to change my mp4 purchased itunes into mp3 format to play in windows movie maker? Thanks!
Karri,
If you have .m4a (iTunes Plus songs), you can convert them by using these instructions: http://support.apple.com/kb/HT1550
If you have .m4p (DRM-encumbered iTunes songs purchased prior to mid-2009) you must first upgrade them to iTunes Plus by following these instructions: http://support.apple.com/kb/HT1711
Ed -
Help with reading information coming from a software into LabVIEW through Serial port
Hi,
I am new to LabVIEW and also an amateur in using RS232 for communication. I have this software that has these icons like speed increase/decrease, elevation up/down, start/stop. Now, when I click these buttons on the software, they perform the appropriate functions. For example, if I press start button, the signal must go through a serial COM port into LabVIEW to start the machine. How do I do that? How do I find what format the code word is when I press a button on the software? And how to decode the information to read whether the button pushed is start etc...? Any help would be appreciated.
V
I may not be perfect, but I'm all I got!That information would be in the programming manual for the device you're controlling. Unless you have a device that has no documentation or you cannot get the documentation that's the first place you should look. If you cannot get the documentation at all then you've got some reverse-engineering to do. To do this you will either need a serial port sniffer (a hardware device), or you can try to use a software-based port capturing program. On Windows PortMon is the most prevalent. This will show you how the port was configured (baud rate, stop bits, etc). Warning: the information is technical.
As far as how to get it running in LabVIEW, you should take a look at the serial port communication examples that ship with LabVIEW. The most problems occur in figuring out how to (a) terminate a write command, and (b) determining when to stop reading. For (a) this is typically done by appending a carriage return or linefeed to the command. This is device dependent. For (b) this is usually done by the byte stream ending with a character like a linefeed. Again, this is device-dependent.
You may also want to peruse this KB article: Serial Instrument Control Tutorial. There are also lots of tutorial on the internet for basic tutorials on serial port communication. -
How to get data from serial port to GUI textArea
From Serial Port.....
Messages from base (always 5 bytes):
0xAA, 0, 0, 0, 0xBB - IDLE Mode
0xAA, 0, 0x80, 0x80, 0xBB - Question Mode
messages from terminal (always 6 bytes):
0xAA, a, b, c, chksum, 0xBB
where chksum = a+b+c;
a = address (0-250)
the 2 MSB's of b represenet the answer:
0 0 - A
0 1 - B
1 0 - C
1 1 - D
the 6LSB's of b and 8bits of c is the time for answer, in milliseconds.
(0-16384 milliseconds)
I have VB Code for that but I want the same thing in Java ...
Can any one help me?
Here's VB Code..
VERSION 5.00
Object = "{648A5603-2C6E-101B-82B6-000000000014}#1.1#0"; "MSCOMM32.OCX"
Begin VB.Form Form1
BorderStyle = 1 'Fixed Single
Caption = "Aakar GUI"
ClientHeight = 4665
ClientLeft = 60
ClientTop = 375
ClientWidth = 6105
LinkTopic = "Form1"
MaxButton = 0 'False
MinButton = 0 'False
ScaleHeight = 311
ScaleMode = 3 'Pixel
ScaleWidth = 407
StartUpPosition = 3 'Windows Default
Begin VB.CommandButton cmdPort
Caption = "Open Port"
Height = 375
Left = 120
TabIndex = 4
Top = 600
Width = 1455
End
Begin VB.ComboBox cmbPort
Height = 315
ItemData = "Form1.frx":0000
Left = 120
List = "Form1.frx":0016
Style = 2 'Dropdown List
TabIndex = 3
Top = 120
Width = 2895
End
Begin VB.CommandButton cmdEnd
Caption = "End"
Height = 495
Left = 1560
TabIndex = 2
Top = 1320
Width = 1215
End
Begin VB.CommandButton cmdStart
Caption = "Start"
Height = 495
Left = 120
TabIndex = 1
Top = 1320
Width = 1215
End
Begin VB.TextBox txtMessage
Height = 2040
Left = 119
MultiLine = -1 'True
ScrollBars = 3 'Both
TabIndex = 0
Top = 2475
Width = 5848
End
Begin VB.Timer tmrRead
Enabled = 0 'False
Interval = 1
Left = 2040
Top = 600
End
Begin MSCommLib.MSComm MSComm1
Left = 3120
Top = 360
_ExtentX = 1164
_ExtentY = 1164
_Version = 393216
DTREnable = 0 'False
ParityReplace = 45
SThreshold = 1
End
Begin VB.Label Label5
Caption = "Result Data:"
Height = 375
Left = 120
TabIndex = 5
Top = 2115
Width = 1320
End
End
Attribute VB_Name = "Form1"
Attribute VB_GlobalNameSpace = False
Attribute VB_Creatable = False
Attribute VB_PredeclaredId = True
Attribute VB_Exposed = False
Option Explicit
Dim PortIsOpen As Boolean
Dim Answers(4) As String
Dim RejectKeystroke As Boolean
Private Sub cmbPort_Change()
Debug.Print cmbPort.ListIndex
End Sub
Private Sub cmbPort_Validate(Cancel As Boolean)
'Cancel = True
End Sub
Private Sub cmdEnd_Click()
MSComm1.Output = "e"
txtMessage.Text = ""
End Sub
Private Sub cmdPort_Click()
On Error GoTo ErrorHandler
If cmbPort.ListIndex < 0 Then Exit Sub
If PortIsOpen Then
cmbPort.Enabled = True
MSComm1.PortOpen = False
PortIsOpen = False
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
Else
MSComm1.CommPort = cmbPort.ListIndex + 1
cmbPort.Enabled = False
MSComm1.PortOpen = True
PortIsOpen = True
cmdPort.Caption = "Close Port"
cmdStart.Enabled = True
cmdEnd.Enabled = True
End If
Exit Sub
ErrorHandler:
Debug.Print Err.Number
Debug.Print Err.Description
MsgBox Err.Description, vbExclamation Or vbOKOnly, "Error opening port"
cmbPort.Enabled = True
PortIsOpen = False
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
End Sub
Private Sub cmdStart_Click()
MSComm1.Output = "s"
txtMessage.Text = ""
End Sub
Private Sub Form_Initialize()
Dim tmp As Variant
tmp = InitCommonControls
End Sub
Private Sub Form_Load()
Answers(0) = "A"
Answers(1) = "B"
Answers(2) = "C"
Answers(3) = "D"
'MSComm1.Settings = "9600,n,8,1"
''MSComm1.Settings = "115200,n,8,1"
'MSComm1.PortOpen = True
On Error GoTo ErrorHandler1
MSComm1.CommPort = 1 ' comm port 1
MSComm1.RThreshold = 1 ' use 'on comm' event processing
MSComm1.Settings = "9600,n,8,1" ' baud, parity, data bits, stop bits
MSComm1.SThreshold = 1 ' allows us to track Tx LED
MSComm1.InputMode = comInputModeText 'comInputModeBinary ' binary mode, you can also use
' comInputModeText for text only use
PortIsOpen = False
cmbPort.ListIndex = 0
' open the port
MSComm1.PortOpen = True
cmbPort.Enabled = False
PortIsOpen = True
cmdPort.Caption = "Close Port"
cmdStart.Enabled = True
cmdEnd.Enabled = True
Exit Sub
ErrorHandler1:
Debug.Print Err.Description
PortIsOpen = False
cmbPort.Enabled = True
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
End Sub
Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer)
If MSComm1.PortOpen Then MSComm1.PortOpen = False
End Sub
Private Sub lblOption_Click()
End Sub
Private Sub MSComm1_OnComm()
' Synopsis: Handle incoming characters, 'On Comm' Event
' Description: By setting MSComm1.RThreshold = 1, this event will fire for
' each character that arrives in the comm controls input buffer.
' Set MSComm1.RThreshold = 0 if you want to poll the control
' yourself, either via a TImer or within program execution loop.
' In most cases, OnComm Event processing shown here is the prefered
' method of processing incoming characters.
Dim i As Long
Dim sBuff As String ' buffer for holding incoming characters
Const MTC As String = vbCrLf ' message terminator characters (ususally vbCrLf)
Const LenMTC As Long = 2 ' number of terminator characters, must match MTC
Dim iPtr As Long ' pointer to terminatior character
' OnComm fires for multiple Events
' so get the Event ID & process
Select Case MSComm1.CommEvent
' Received RThreshold # of chars, in our case 1.
Case comEvReceive
' read all of the characters from the input buffer
' StrConv() is required when using MSComm in binary mode,
' if you set MSComm1.InputMode = comInputModeText, it's not required
'sBuff = sBuff & StrConv(MSComm1.Input, vbUnicode)
'If Len(txtMessage.Text) > 4096 Then txtMessage.Text = ""
sBuff = MSComm1.Input
Dim ch As String
Dim PacketStart As Boolean
Dim PacketLength As Integer
Dim Packet() As String
PacketStart = False
PacketLength = 0
While (Len(sBuff) > 0)
ch = Left(sBuff, 1)
If (ch = Chr(&HAA)) Then PacketStart = True
If (ch = Chr(&HBB)) Then PacketStart = False
If (ch <> Chr(&HAA) And ch <> Chr(&HBB)) Then
PacketLength = PacketLength + 1
ReDim Preserve Packet(PacketLength)
Packet(PacketLength) = ch
End If
'txtMessage.Text = txtMessage.Text + Format(Hex(Asc(ch)), " @@")
sBuff = Right(sBuff, Len(sBuff) - 1)
Wend
If (PacketLength = 3) Then
Debug.Print "Command packet recieved"
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(1)))
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(2)))
End If
If (PacketLength = 4) Then
Debug.Print "Response packet recieved"
txtMessage.Text = txtMessage.Text + "Address =" + Str(Asc(Packet(1))) + _
" Answer = " + Answers((Asc(Packet(2)) And &HC0) / 64) + _
" Time =" + Str((Asc(Packet(2)) And &H3F) * 256 + (Asc(Packet(3)))) + "mS" + vbCrLf
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(1)))
'txtMessage.Text = txtMessage.Text + vbCrLf + "Option =" + Str((Asc(Packet(2)) And &HC0) / 64)
'txtMessage.Text = txtMessage.Text + vbCrLf + "Time =" + Str((Asc(Packet(2)) And &H3F) * 256 + (Asc(Packet(3))))
End If
If (PacketLength <> 4 And PacketLength <> 3) Then Debug.Print "Unknown packet of length" + Str(PacketLength) + " recieved"
txtMessage.Text = txtMessage.Text + vbCrLf
' An EOF charater was found in the input stream
Case comEvEOF
DoEvents
' There are SThreshold number of characters in the transmit buffer.
Case comEvSend
DoEvents
' A Break was received.
Case comEventBreak
DoEvents
' Framing Error
Case comEventFrame
DoEvents
' Data Lost.
Case comEventOverrun
DoEvents
' Receive buffer overflow.
Case comEventRxOver
DoEvents
' Parity Error.
Case comEventRxParity
DoEvents
' Transmit buffer full.
Case comEventTxFull
' Unexpected error retrieving DCB]
Case comEventDCB
DoEvents
End Select
End Sub
Private Sub tmrRead_Timer()
'MSComm1.Output = vbCrLf + vbCrLf
'MSComm1.Output = Chr(128)
End Sub
Private Sub txtMessage_KeyDown(KeyCode As Integer, Shift As Integer)
If Shift = 2 Or Shift = 4 Then RejectKeystroke = False Else RejectKeystroke = True
End Sub
Private Sub txtMessage_KeyPress(KeyAscii As Integer)
If RejectKeystroke Then
KeyAscii = 0
End If
End SubThanks in advance..I want to replicate the entire VB program as Java Program.
This has to be included in my project which i am doing in java. -
Want to use dotNet with teststand, but unsure how to send commands through serial port
I have a loCom communication dll used to send and recieve commands through serial comunication for a particular product. I the past they have used a LabVIEW wrapper to send and recieve commands, using this particular dll. I would like to just use testStand for the DOTNET Dll. I can get the commands, know the inputs and outputs required, however I can not figure out how to send the commands to the serial port. Anyone have any exprience doing this in TesSTand?
hallawt,
With your .NET code module, you should be able to call it directly, most likely as a parameter in the .NET method.
What are the inputs for the method you're trying to use?
Also, could you clarify where you're starting to have problems in your project?
Regards,
Renée M
Applications Engineer
National Instruments -
How to change the default SSH port on Cat 6500 WS-SUP720-3B
I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
Thanks in advance..Hi Neil,
Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
Regards,
Nicolas -
How to change the default servcie port number to be checked for the IPS sig
Dear
i have an AIP-SSM (IPS) installed in a an ASA firewall.
i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
but the case is that the services have to be checked is not the default services port numbers.
http port is 8081
oracle port is 2006
and many other services.
the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
ThanksYou would set those as part of the signature variables.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009 -
How can I read a serial port using XCode?
Hello,
I'm using an iMac 2009 with Mac OS X 10.6.7. I have a USB to Serial cable and I want to connect a hardware I made using a microprocessor Microchip PIC to my mac. I'd like to read values from the serial port and also write values to it. I'm already able to do this using the Terminal with the following command:
screen /dev/tty.usbserial 9600
I'd like to build my own application now. Does anyone could send me any sample code?
I'm using XCode 3.2.5 and I'm a beginner on XCode.I looked at Dev Center for sample code, and I found this link:
http://developer.apple.com/library/mac/#samplecode/SerialPortSample/Introduction /Intro.html%23//apple_ref/doc/uid/DTS10000454-Intro-DontLinkElementID_2
I downloaded the sample Xcode project and, when I click on "Build and Run" button, it generates an error with the following message:
"GCC 4.2 is not compatible with the Mac OS X 10.4 SDK (file SerialPortSample.c)"
Maybe, it occurs because the code is too old (2005). I didn't find any newer sample.
Could you help me?
Thank you.
Maybe you are looking for
-
How can i fix my itunes because it wont open because of (-50)?
i have tried unstalling it and then installing it again yet it still wont open.
-
So I've been using newsbeuter like many people for over a year now. However, the one complaint I and many others have voiced on the forums is that: there exists no cron RSS reader. Sure you can run newsbeuter 24/7 with the auto-refresh feature enable
-
Display last value from a row or column?
I'm using Numbers 09 and want to display the last value entered in a column in another table. For example in Table A I have columns set up by date with simple sums at the bottom of each column. I add new sums every day depending on the values from th
-
I can't see iPhoto on my computer
I had my computer formated yesterday and now all apps like iphoto and garage band and many others are gone! How can I get them back?
-
Best way to create a frame around an image
I'm not sure what to use to create a frame of different shapes (I can do it with tubes in Paint Shop Pro but want to figure it out in Adobe) around an image and then give the image in that frame a fuzzy or old-fashioned look. I have the CS4 Master Co