Help in moving a Premier CS4 project from one coputer to another

As the subject line says: I have upgraded my editing computer to a 12 G, i7 system and I would like to move an existing project on my older Duo Core 2 system to the i7 system. Both are on my network and I have already copied the media files over. I would like to know how to export, migrate, backup/restore, move the Project and then point the project to the media files.
Any assistance would be appreciated.
Thanks,
Lp

Thanks Eddie. The 'Help' reference was right on. I followed the instructions and chose space on another drive. Once it had completed, I copied the new subdirectory that I had created as the target to the new computer. Harm, thanks also to you but I did not have to respect the drive letters or original subdirectory structure. After the copy had completed, I opened Premiere and navigated to the location and opened the project. The only thing it complained about was the scratch locations and I reset those to a 'custom' location. Then I scrubbed through the timeline, rendered the transitions and was home free!
As an 'FYI...', my new system is a homebuilt i7 920 @ 2.67 Ghz (no overclocking needed), 12 Gig Ram, and an Nvidia GeForce GTX-260 video card and the combination is fantastic. the scrub, playback, render are smooth and flawless. No jerking or pixelization problems. The old project was shot with a Sony SR-1; a new project with a Sony XR520v at full HD.
The old system was a DuoCore 2 Q6700. The difference is nothing but amazing!
Again, thanks for the assistance. (I had searched but forgot the obvious!)
Lp

Similar Messages

  • Moving Events and Projects from one location to another on the same hard drive.

    Hello.
    I've searched in the FCP X User Manual, on this forum and in Google, but have found no explanation of how to do this, so I'm posting this here in hopes that someone in our community will be able to help.
    I've previously stored my FCP X Events and Projects folders on an external 3TB hard drive, because there is more room on it than on the internal 1TB hard drive, but, since then, I've worked with other media apps, for video, photography and audio, the files for which are also stored on the external hard drive, and this has created a bit of clutter with no folder structure to keep it tidy.
    I like an organised file structure on my system, to keep it uncluttered, easy to navigate and efficient to use, so I put all the files for my photography, video and audio apps into their own folders, which are, in turn, stored in their appropriate folders for Audio, Photography and Video, and those three folders are stored in a folder called Media, and then I directed each app to its own files.
    The only app with which this has been a problem is FCP X. While there is a way of relocating projects and events from within FCP X, it allows the user to move them from one hard drive to another, and not, as I want, from one place to another on the same hard drive.
    I'm not sure if it matters, but perhaps it's relevant to mention before the next paragraph that the files that had previously been imported as events are, to save hard-drive space, stored in the events folder as shortcuts to the original files, which are stored elsewhere on the drive, rather than as duplicates of those files.
    In Finder, I copied the Events and Projects folders to their intended new locations and tried in the app to link the events and projects to their new Finder location. It seemed to have worked, until I moved the original folders to the Trash. On re-opening FCP X, it was clear that the linking hadn't worked. I returned the original folders from the Trash to their original location, but that didn't entirely reverse the problem. I noticed also that, in the original and duplicated Events folders, the shortcuts had lost their links to the original files stored elswehere on the drive.
    Fortunately I had run a backup before starting, so I restored the original folders and the app from the backup, and all was back to normal.
    I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
    Thank you.

    Ludio wrote:
    I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
    I
    Message was edited by: Russ H Apparently mis-read the questions.

  • Need help coping project from one computer to another.

    I need help coping project from one computer to another.  I loaded all video on computer 1, copied events and project folder to computer 2.  I was told I only needed to copy the project folder back to computer 1 since the events folder is already there.   I copied project folder back to computer 1 but the files wont open.  I dont have computer 2 available. 
    Please help!!!

    Hi
    No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
    You've got several problems
    • iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
    • Never MOVE or alter any folder named
    iMovie Projects - or -
    iMovie Events
    on DeskTop/Finder - This might be very harmful
    • Moving (Projects) and Events - HAS TO be done within the iMovie Application.
    You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
    Here You can move within this "window" to another location
    • Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
    and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
    to get this over to the second Mac too, to be able to continue editing.
    So to move Your projects to another Mac You need
    • iMovie'09 or 11
    • an external hard disk -
    MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
    Should be a FireWire one - as UBS/UBS2 performs badly when used for video
    • Then move/copy over within Project resp Events window in iMovie Application
    Hopefully I've been not to confusing or badly structured to be followed.
    Yours Bengt W

  • Moved iMovie 09 project from one computer to another - now timing is wrong!

    Hello,
    I wanted to copy some Events and Projects from my Dad's older MacBook Pro to my iMac. So I just copied the event folders (from <Home Directory>/Movies/iMovie Events/) and the project files (from <Home Directory>/Movies/iMovie Projects/) to the corresponding folders on my iMac.
    I then opened up iMovie on my iMac and saw that the Events and Projects were there. So far, so good.
    The first problem I noticed was when I exported one of the projects from my iMac using QuickTime. The duration of the resulting .MOV file was about 30 seconds shorter than the duration of the project!
    I watched the Project in iMovie, and found that the clips in the Project were 'cut off'. For example, the clip in the Project would say it was 10 seconds long, but when you played the Project the clip was only 7 seconds long.
    How could this be? Is the speed of the Project somehow tied to the computer that created the project? i.e. perhaps the speed of the processor could impact this? I highly doubt it, as it would make it impossible to move projects from one computer to another.
    Bottom line - the identical Project file on my iMac (with the same underlying events) will produce a different exported movie file than the exact same Project file on my Dad's laptop. Specifically, my version will be shorter and the clips will be cut off.
    Any ideas would be greatly appreciated....

    The macrumours link just telss you how to move the events which is relatively straightforward.
    Alot of advice just seems to rest with leave the projects on your internal drive as they don't take up much space.
    However, http://karsten.schluter.googlepages.com/im08tricks has a description of how to move the projects and then 'fool' imovie into where the projects are stored.
    Not very flexible but it does allow you to 'clear' your macbook yet when you restore the sym-link file to the right place and restart imovie you can reconnect to all your old projects and events without yellow triangles of death appearing.
    By the by apple needs to sort this out as archiving old projects and events together and preserve the editing is a really basic requirment I think.
    PS anyone found out how to merge projects yet? Another basic function that seems to be lacking.

  • What is the easiest way to transfer a large imovie project from one computer to another in a different location.

    What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

    OK it depends.
    If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
    If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
    Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
    https://discussions.apple.com/docs/DOC-4141

  • How to move iMovie project from one computer to another

    I have been working on an iMovie 09 project on my desktop at home.
    Now I want to work on the same project on my computer at work.
    How can I move the project from one computer to another?   What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer.   It didn't work.
    Thanks for your help.

    Hello James Snedeker,
    After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
    iMovie: How to Save Projects to Another Hard Disk
    To copy an iMovie project to another disk:
    1. Quit iMovie if it is open. 
    2. Locate the project folder in the Finder.
    3. Drag the project folder to the other disk.
    Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
    Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Project from one mac to another

    Hi
    How dose one take a project from one mac to another.
    On one of mac the fotage has been cut as a ruff cut and I would like to take that edited to another mac the fotage is on both mac. Is it as simple as a edl list and reconnect the fotage on the other mac.
    tips please as this is the first time I'm going to do this
    thanks for helping out going from 5.1 to 6
    trevor

    Just copy the project file to the other Mac, and open it. Reconnect if FCP asks you to.
    If you just want that single sequence, right-click the sequence in the Browser window, and choose File -> Export -> XML (version 3). Copy and import that in FCP on the other Mac. (File -> Import -> XML)

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • HT201109 Why can't I open a final cut project from one computer in another computer?

    I'm using Final Cut Pro Trial. Why can't I open a final cut project from one computer in another computer? When I try to open the project on my desktop it doesn't recognize the format. Please help!

    I downloaded FCPX trial on my laptop as well as on my desktop. I did some editing on my laptop but I need to get the project I created on my laptop onto my desktop. When I import the project onto my desktop the videos are Red and they say "Missing File."

  • Transfer iWeb project from one computer to another

    I was just wondering if there is any way that you can transfer a iWeb project from one computer to another. I built a website at home on my MacBook and want it on my iMac at work so I can modify it there as well. Can this be done?

    Often asked. Often answered: [Transfer domainfile|http://discussions.apple.com/search.jspa?threadID=&q=transfer+domain file&objID=f1193&dateRange=last90days&userID=&numResults=15&rankBy=10001] and [multiple computers|http://discussions.apple.com/search.jspa?objID=f1193&search=Go&q=mult iple+computers]
    From the iWeb Help
    !http://www.wyodor.net/_Discussions/MoreThanOneComputer.png!

  • Moving iPhone App Project from one Mac to Another...HELP!!

    Hey guys,
    Im new to programming. I made a simple app and I want to most it from one mac to another. I copied the folder and tried running it but it gave me a whole bunch of errors along the lines of:
    - directory not writable
    - permission failed
    - errors permission denied
    etc...
    I do not know what I am doing wrong. Please please help!

    Hi GadgetAddicted & welcome to discussions...
    It sounds like you're not using the original locations that are constructed when Xcode is first installed.
    If your second install is the same as the original, moving a simple project that is intact to begin with shouldn't be a problem.
    Be sure that all the resources related to that project are local to the original project (inside the same parent folder), and then duplicate the parent folder...move that, but be sure the name of the parent folder in the second location is the same as in the original.
    Repair permissions via Disk Utility after the move.

  • Moving an iWeb project from one computer to another

    An iWeb web-site project I have been working on for years needs to be moved from one computer to another. The iWeb project currently resides in iWeb 2 on a G4 iMac running MacOS 10.4.11. I'd like to move it to my MacBook Pro so I have access to iLife 2009. What steps do I need to take to complete the transfer?

    What steps do I need to take to complete the transfer?
    Search the forum. It's discussed almost daily in different wordings.
    Or read the help :
    !http://www.wyodor.net/_Discussions/WhereiWebFile.png!

  • Moving project from one VSO to another VSO and transferring ownership

    Hello,
    I want to understand if we can move a project from VSO owned by one company to VSO owned by other company.
    also is there any risk of moving and any data would be lost?
    Is there any procedure that i need to follow and take care
    Kindly assit.
    Regards
    Abhijeet 

    Hi Abhijeet,
    If you want to move team project from one VSO account to another VSO account, then you can use the tools that Vishal mentioned above. If you want to move Visual Studio projects under team projects to another VSO account, then you can unbind Visual Studio
    to source control and add to team project in another VSO account.
    For changing the VSO account ownership, you can check this
    page for more details.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Trouble moving projects from one computer to another

    In the prospect of clearing up space, I am moving projects from my hard drive to an external.  In order to make sure things are moving properly I open up a project from the external onto another computer, different from the one I moved the projects off of.  When I open up the project, part of the original footage (.MTS file) does not show up in the timeline.  The blue rectangle that represents the footage is striped.  When I open up the exact same project onto the original computer from the external everything is fine.
    Also, when I was opening up a project from the external to the other computer the "Locate Media" pop up appears wanting me to link all the media, but all the media has been checked off, as if all the media has already been found.  Why does it do this?
    Thanks,
    Josh

    Hi Josh,
    Check this out: Moving projects to another computer: http://help.adobe.com/en_US/premierepro/cs/using/WS1BF3BAAB-A930-44e3-8DFA-50D5C58A1A1Aa.h tml#WS3D22F379-B6C7-4d8c-9548-26AA3E1EA74F
    Likely you have some of the MTS file structure missing. The best way to move projects, IMHO, is to use the Project Manager.
    Thanks,
    Kevin

  • Need help transfering a fcp project from one Mac to another

    I have two students who need to work on projects on the same computer at the same time-deadlines-and need to move one project AND all the files to another Mac. When we open this file it asks to reconnect everything and it's taking forever to match everything up correctly. Is there any way to scoop up all the files needed in one file as there is in IMovie so that all needed files are associated with the project and move together? Please help if you can, I have a fast external drive to put the files on.

    Or make an exact copy of the media files from one drive to another and make sure that the drive names and directory structure are identical. fcp will not be able to tell the difference and the files should not need any reconnecting.

Maybe you are looking for