Help in moving bdump, udump and cdump

I have been asked to move the dump directories in a
database. the path they point to is incorrect. how do
I make this move so that they are located at a new
path. OS is linux, database is 9i (9208)
thanksI don't quite understand your requirement. Is the problem
1) The parameters don't point at valid directories? or
2) The directories are valid - but in the wrong place?
In both cases you will want to update the relevant initialisation parameters which are respectively
background_dump_dest
user_dump_dest
core_dump_destIn the second case you'll also likely want to move the os files - using the os mv command, but I'd rename the old alert.log file when moving it.
Niall Litchfield
http://www.orawin.info/

Similar Messages

No trace files in udump and bdump.

Dear all,
I have oracle 10g on linux.
There are no files in folder bdump and udump.What could be the reason.
Is there any parameter that need to be set.
Please advice.
Regards,
Amit.

Hello Amit,
Looks pretty strange you have all parameters set properly and you have physical directories available but you are not seeing any trace files.
Try this little test and see if oracle generates trace files.. or not.
$ more trace.sh
sqlplus / << DOC
grant alter session to scott;
conn scott/tiger
create trigger logon_trigger
after logon on schema
begin
execute immediate
'alter session set events ''10046 trace name context forever, level 12''';
end;
DOC
$ sh trace.sh
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 2 16:18:04 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
Grant succeeded.
SQL> Connected.
Trigger created.
<< check udump directory >>
# /u01/oracle/admin/TEST/udump $ ls
total 2
-rw-r--r--   1 oracle   oinstall     136 Jan 5 11:24 tkprof.sh
<< Login and run some SQL statements >>
# /u01/oracle/admin/TEST/udump $ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 2 16:18:15 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
SQL>select * from tab;
TNAME                          TABTYPE CLUSTERID
EMPLOYEES                      TABLE
TESTING                        TABLE
EMP                            TABLE
DEPT                           TABLE
BONUS                          TABLE
SALGRADE                       TABLE
DUMMY                          TABLE
7 rows selected.
SQL> exit
Disconnected from Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
<< check for trace files in udump directory >>
u0002sfo: /u01/oracle/admin/TEST/udump $ ls -l
total 274
-rw-r-----   1 oracle   oinstall 129758 Jun 2 16:18 test_ora_11030.trc
-rw-r--r--   1 oracle   oinstall     136 Jan 5 11:24 tkprof.shJust a guess.. Are there any cronjob(s) running to clean up bdump/udump/cdump directories periodically.
-Sri
Message was edited by:
Srikanth Pulikonda

After moving my iTunes and iPhoto libraries to an external hard drive and deleting the originals i found i still had no space on my mac.help

i moved my itunes and iphoto libraries to an external hard drive to free up space on my mac.
after i had moved them and checked they could be found i trashed the originals and checked again that the could be found on the external hdd.
all seemed to be ok.
when i checked the disc utility it did not show i has made any more free space than i had before.
any help please as i am loving tje mac but i am still quite new to it.

Did you empty Trash?

TS1286 Iphone 3gs bought in UK. Moved to Australia and I am trying to sync iphone. Error message received "unknowen error occurred (9006). Can anyone help

I bought my iphone 3gs in UK. I moved to Australia and I am now trying to sync iphone. However I keep getting error message "There was a problem downloading software to iphone. A unknown error occurred (9006). I have looked at network settings and everything seems ok. Can anyone help?

Look at http://support.apple.com/kb/TS3125
Error 9006 on the apple site says "
Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance."

I moved to Tunisia and now i cannot update my billing address and credit card ! any help ?

Hello
i have moved to Tunisia and nowI cannot use my apple id anymore because my shipping/billing old address is not valid anymore
It seems that Apple does not accept tunisian addresses for billing and for credit cards
Any help ?

Are you changing the country/region to Tunisia in your account information before you are trying to put in a new credit card and billing address for Tunisia?

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to FL and switched to Comcast (only option). Now when I access one of my banks, I can get past the login page and the opening page of my account but the data is unavailable. Bank no help.

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.

Harden your Mac against malware attacks

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

I had iMessage with a UK number and I have moved to Australia and want to use an Australian number, how can I change it over?

I had iMessage with a UK number and I have moved to Australia and want to use an Australian number, how can I change it over?

something here may help
http://support.apple.com/kb/TS4268

I just moved to iCloud and now my old emails are gone. How do I get them back?

I just moved to iCloud and now all my old e-mails (not from a me account) are gone. How can I get my e-mail back? Please Help!!

Hi Roger!
You are right. It was not exaclty the moving to iCloud that caused the e-mail to disappear. What happened after the change to iCloud was that I did see my old email but when I tried to open it just does not show any content.
Then I looked at some options and did Choose Mailbox > Rebuild.
That is when all my old mail disapeared.
Any suggestions?
Thank you so much for your help!!

Moving average prices and std prices

hi friends,
i have a doubt abt prices...
which will b assigned for raw materials-standard price? or avg moving price? and why?
if possible explain clearly about avg.moving price and std.price
for spit valuation what price we will use??
help me out..
thanks in advance...
venkat

Standard price are used for products that do not fluctuated frequently. It is usually used for finished or semi finished products.
Moving average price are used mainly for raw materials that are purchased externally. The advantage of using moving average price for your raw materials is that your inventory costs will always reflect the current market cost.
SAP strongly recommends that you do not select price control V for semi-finished products and finished products, because doing so will very easily cause the calculation of unrealistic valuation prices. SAP recommends:
Price control V for raw materials and trading goods; price control S for semi-finished products and products
We recommend that you only use price control V for materials procured
externally. Materials produced in-house should be subject to a
standard price control.
Generally all raw materials (ROH), spare parts (ERSA), traded goods (HAWA) etc. are assigned as moving average price (MAP) because of the accounting practice of accurately valuating the inventory of such materials. These materials are subject to the purchase price fluctuations on a regular basis.
The semi-finished goods (HALB) and finished products (FERT) are valuated with standard price because of the product costing angle. If these were to be MAP controlled, then finished/semi-finished product valuation would fluctuate due to data entry errors during backflushing of material and labour, production inefficiencies (higher cost) or efficiencies (lower cost). This is not a standard accounting and costing practice
For Split valuated material it is recommended to use Moving average price

Moving average price and standard price

Dear All,
Its simple question can any one explains me what is the difference between moving average price and standard price and how the posting will happen with these two price controls and what will get updated.

Dear Tiru,
There are two types of price control as below:
a)Moving Average Price (MAP):
-If PO and or Invoice price was differ from material master record, the difference was posting
to stock account. Therefore the valuation price will change.
b) Difference between a PO price or invoice price and the material master are posted to price
difference account(PRD). As a result, the price in material master remain same.
Example:
Material Master Record:
Total Qty: 10, Total Value 20, Price 2
Scenario:
PO: 10pcs at 2.50 EUR/PC
Good receipt 10 pc
Invoice 10 pc at 2.50 eur/pc
a) MAP:
Posting:
Stock Account GR 25 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
New Material Master ,Result:
Total Qty = 20
Total value = 45
Price = 2.25
b) Standard Price:
Posting:
Stock Account GR 20 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
Price difference Account(PRD) GR 5 +
New Material Master ,Result:
Total Qty = 20
Total value = 40
Price = 2.00
Hope this help.
Loke Foong

What is the impact on an Exchange server when moving FSMO role and schema master into another DC?

What is the impact on an Exchange server when moving FSMO role and schema master into another DC? What do we have to do on exchange after performing a such task?
I had 1 DC (Windows server 2008 R2), 1 Exchange 2010 SP3. I install a new DC (Windows server 2008 R2). I then move all the FSMO role including the schema master role into the NEW DC. I check to be sure that the new DC is a GC as well.
I shutdown the old DC and my Exchange server was not working properly and specially Exchange Management Shell. It start working again after I turn up the older DC.
I am wondering why Exchange did not recognize the new DC, even after moving all the roles on it.
I am looking to hearing from you guys.
Thanks a lot

if you only have 1 DC, you might need to cycle the AD Topology service after shutting the one down.
Also, take a look in the windows logs, there should be an event where Exchange goes to discover Domain Controllers, make sure both are listed there. You can probably force that by cycling AD topology (this will take all services down so be careful
when you do it)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Needing help with moving pictures around

I am in need of help in moving pictures and images around
dreamweaver document window. My older brother gave me his computer
witch has dreamweaver MX (he is in Irag) so i can start building
building my own websites. I went to borders and bought a book on
dreamweaver MX. Here is where I am having a problem with: when ever
I bring a picture into the document window I can not move the
picture around the document window. The book say "place the
insertion point where you want the image to appear" but there is no
insertion point. There is just a straight line as if I am about to
type something. It's almost like I am in microsoft word. If I take
the mouse over the picture , and then left click and try to drag
the picture to the location I want it in, it doesn't move. Can
somebody PLEASE help me out with this problem. Thanks Jical

Nadia gave you a good place to start… Here is what you
have to understand. Web pages are based on specific code that tells
the viewer’s browser how to display the page. There has to be
something that says, “Put this picture in the lower right
hand corner, and center this image in the middle of the
screen”
Then there are further instructions that say “Put this
text here and that link there”. So Dreamweaver (and most
other web developing programs) do not work like Illustrator or
PowerPoint where you can simply grab a picture and slide it around
the page.
In its simplest form you might drag an image onto the
Dreamweaver design view page and click on the center button in the
properties dialog.
Then type in text and center it, left justify, right justify,
etc. Add another picture and so on and you could possibly create a
passable web page. Now click on the Code view button and see what
code Dreamweaver generated in order to do all of this.
That is what you will really need to understand before you
can really get proficient at web design.
At the next level, you can start to add in tables. These
actually are similar to tables in Word. You can put text in one
cell, images in another, colored backgrounds, thick and thin
borders with contrasting colors, and you can start to see how to
“contain” your images as Nadia suggests.
Now look at the code again and see how these cells are
defined around your content.
Once you understand how this works, you will get much more
comfortable with Dreamweaver. You will just have to get used to the
idea that it doesn’t work like all of the publishing software
that is only dependant upon its own format for layout. HTML is
dependant upon the many browsers, computers, operating systems,
user preferences, and a million other unknown factors.
That’s why this forum has more than 91,000 posts…

Serious Help! Handling Sound Position And Speed!

Take a look at this: https://sites.google.com/site/pardeepgames/Untitled-1.swf. It may take some time to load, sound is 42 seconds, see the second text field for time buffering.
I recommend reading the Source Code below first.
Now as you can see the pitch and speed functions are working perfectly, but the problem is that when you move the slider, the songTime text field dosen't work correctly. When you raise the pitch the songTime should just speed up the counting not change it's position, same when you lower the pitch, it should just slow down the counting not change it's position. Well that isn't working for me. The Source Code is there for you below and all the information you need is in the comments in the code. Please help me out. Oh and I recommend focusing on the songTime text field and then moving the slider.
Source Code:
Name of the slider: "slider".
Name of the first text field: "songTime".
Name of the second text field: "songTotalTime".
import flash.events.Event;
import flash.events.SampleDataEvent;
import flash.media.Sound;
import flash.net.URLRequest;
import flash.utils.ByteArray;
import fl.events.SliderEvent;
import flash.media.SoundChannel;
var _playbackSpeed:Number = 2;
var sound:Sound;
var sound2:Sound; // Copy of the original sound, to get the right information about the sound because the pitch shifting for the original sound variable ruins it up.
var myChannel:SoundChannel = new SoundChannel();
var _loadedMP3Samples:ByteArray;
var _phase:Number;
var _numSamples:int;
var request:URLRequest = new URLRequest("https://sites.google.com/site/pardeepgames/Not%20Afraid%20Instrumental.mp3");
var songTimeTime:Number = 1000; // The variable that allows the songTime's speed to change accoriding to the value of the slider. See in line 32.
loadAndplay10(request);
addEventListener(Event.ENTER_FRAME, enterFrame);
function enterFrame(event:Event):void
progressBar.scaleX = myChannel.position / sound2.length;
_playbackSpeed = slider.value;
songTimeTime = 1000 / slider.value;
songTime.text = convertTime(myChannel.position);
songTotalTime.text = convertTimeLength(sound2.length);
function loadAndplay10(request:URLRequest):void
sound = new Sound();
sound2 = new Sound();
sound.addEventListener(Event.COMPLETE, mp3Complete);
sound.load(request);
sound2.load(request);
function playLoadedSound(s:Sound):void
var bytes:ByteArray = new ByteArray();
s.extract(bytes, int(s.length * 44.1));
play10(bytes);
function mp3Complete(event:Event):void
playLoadedSound(sound);
function play10(bytes:ByteArray):void
stop10();
sound = new Sound();
sound.addEventListener(SampleDataEvent.SAMPLE_DATA, onSampleData);
_loadedMP3Samples = bytes;
_numSamples = bytes.length / 8;
_phase = 0;
myChannel = sound.play();
function stop10():void
if (sound)
sound.removeEventListener(SampleDataEvent.SAMPLE_DATA, onSampleData);
myChannel.stop();
function onSampleData( event:SampleDataEvent ):void
var l:Number;
var r:Number;
var outputLength:int = 0;
while (outputLength < 2048)
// until we have filled up enough output buffer
// move to the correct location in our loaded samples ByteArray
_loadedMP3Samples.position = int(_phase) * 8;// 4 bytes per float and two channels so the actual position in the ByteArray is a factor of 8 bigger than the phase
// read out the left and right channels at this position
l = _loadedMP3Samples.readFloat();
r = _loadedMP3Samples.readFloat();
// write the samples to our output buffer
event.data.writeFloat(l);
event.data.writeFloat(r);
outputLength++;
// advance the phase by the speed...
_phase += _playbackSpeed;
// and deal with looping (including looping back past the beginning when playing in reverse)
if (_phase < 0)
_phase += _numSamples;
else if (_phase >= _numSamples)
_phase -= _numSamples;
function convertTime(milliSeconds:Number):String
var Minutes:Number = (milliSeconds % (songTimeTime * 60 * 60)) / (songTimeTime * 60);
var Seconds:Number = (milliSeconds % (songTimeTime * 60 * 60)) % (songTimeTime * 60) / songTimeTime;
if (Minutes < 10)
var displayMinutes:String = "0" + Math.floor(Minutes);
else
displayMinutes = Math.floor(Minutes).toString();
if (Seconds < 10)
var displaySeconds:String = "0" + Math.floor(Seconds);
else
displaySeconds = Math.floor(Seconds).toString();
return displayMinutes + ":" + displaySeconds;
function convertTimeLength(milliSeconds:Number):String
var Minutes2:Number = (milliSeconds % (1000 * 60 * 60)) / (1000 * 60);
var Seconds2:Number = (milliSeconds % (1000 * 60 * 60)) % (1000 * 60) / 1000;
if (Minutes2 < 10)
var displayMinutes2:String = "0" + Math.floor(Minutes2);
else
displayMinutes2 = Math.floor(Minutes2).toString();
if (Seconds2 < 10)
var displaySeconds2:String = "0" + Math.floor(Seconds2);
else
displaySeconds2 = Math.floor(Seconds2).toString();
return displayMinutes2 + ":" + displaySeconds2;

this is a public forum. no one here (or anywhere else that i know of) is obligated to work for you for free.
your options are to keep working on this yourself or hire someone to help you. if you can narrow down the problem's location and post the problematic code you could still get free help.
or just wait. given enough time maybe someone willing to donate their time to help you will read your post.

Help in moving bdump, udump and cdump

Similar Messages

Maybe you are looking for