Help in opensparcT2 Dv-guide

hi,
i want to know so definitions it seems silly questions but i am a beginner and it seems difficult to understand it so hope u help me with that
1- what is the meaning of Regression and what is the difference between mini and Full in T2??
2- what is the meaning of synthesis flow ??
3- what is the meaning of diaglist file and how can i get" .s " of my code ??
thanks in advance
Regards
Nsreen

Hi Vasu,
Please check the assigned authorization objects for the role SAP_J2EE_ADMIN using PFCG transaction. In the standard SAP doesn't add any authorizations to the role, so that you can't really use it to login to XCM applications.
Do not forget to reward the useful answers
Regards,
Paul Kondaveeti

Similar Messages

Help document for Implementation Guide

I can't find the help document for SAP Implementation Guide (IMG) in ECC5.0
But I can find this document in R/3 4.6C.
So,where can I find this document in ECC5.0 or ECC6.0,I want to learn the configration guide.
Else,can anybody find the IDES document in ECC5.0?

Hi,
Kindly check the following links:
http://help.sap.com/content/bestpractices/baseline/bestp_baseline_baseline_V500.htm
http://help.sap.com/content/bestpractices/baseline/bestp_baseline_baseline_V600.htm
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
you can find the documents for SAP Implementation Guide (IMG) in the above links.
hope this helps!
best regards,
Thangesh

Where is the Help or User's Guide for this product?

I just installed Photoshop Album SE 3.2. Now I want to learn how to use it. I select Help from the menu, then select Adobe Photoshop Album Starter Edition 3.2 Help, and that takes me to the product download page; no user's guide, reference, or anything resembling them. Searching Adobe Support didn't get me anywhere. Is there help anywhere?

try http://www.adobe.com/products/photoshopalbumstarter/pdfs/psase3.2_help.pdf
Enjoy
CA
http://www.startereditionuser.com

Help on how to guid (ABAP conversion)

I have followed the how to guid (how to convert an IDox-XML structure to a flat file and vice versa in XI 3.0).
I have got the error message complaining : CX_SY_REF_IS_INITIAL.
Is anyone there has done this before and could give a hand please!
This is urgent to me!
Thanks!

Hi Jason,
Check the below mentioned links:
http://help.sap.com/saphelp_47x200/helpdata/en/a9/b8eef8fe9411d4b2ee0050dadfb92b/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
Amaresh

Please help, any tutorials, tips, guides???

hi, i need to make some leaflets for work and little card type things with borders around them. i also need to be able to insert photos etc.
are there any tutorials or help guides on line i can be directed too.
please help.
my job is on the line!!!

Hi x..
Have you read the AppleWorks Help documents that came with the application? To access them, open AppleWorks, then go to the Help menu. For the two projects you list, the Draw environment seems the best choice tool to use.
If your leaflet is a trifold brochure, you'll find an example brochure (that you can base yours on) in the Templates section of Starting Points. Some of the other templates in this section may also give you ideas about the cards or about other forms of leaflets.
The graphics included in AW's Clippings library don't include a borders section, and most of the clippings are a bit dated.
Although AppleWorks is fine for simple brochures and cards, you may find that Pages, part of iWork is more flexible and easier to work with for this purpose. One potential problem there is that iWork may be in line for an upgrade next month (the last two Januarys have both seen full version upgrades to iWork). While that won't make the current version obsolete, the new one will likely include more capabilities and some improved features.
As for online tutorials, a search for "AppleWorks tutorial" (with or without the quotes) will bring up quite a few. Most, though, seem aimed at a school setting, and the majority are strongest on the word processor module.
Regards,
Barry

Can anybody help me with Student Guide for Cluster Mode Data Administrator exam ( NS0-156)

Hi All, Can help me with a Cluster Mode Data Administrator exam Guide NS0-156. Thanks,Nayab

Here is the corrected link: http://www.netapp.com/us/services-support/university/certification/ncda/ncda-prepare.aspx
I hope this response has been helpful to you.
At your service,
Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Help with flashing, cpitchford guide.

Hello,
I have been following cpicthfords guide to flashing
/t5/Maemo-Devices/Flashing-N900/td-p/692662
I'm up to step 8, when I open Ubunta there is no Ubuntu 9.10 virtual machine file. I have attached a screen grab of what is there.
Where do I go from here?
(cpicthford: I have seen a lot of posts of you helping others on here. If you can help me with this I would be grateful)
Solved!
Go to Solution.
Attachments:
Ubunta.png ‏157 KB

Hello,
Thanks for the speedy response!
I followed all the steps up to step 8, when I opened the extracted file from the desktop the screen grab is what was in the extracted file.
Edit. I even tried deleting the zip file and the extracted file and downloaded it and extracted it again and still ended up with the same problem, I tried this 3 times!

Need help with reformatting to GUID partition so I can install Snow Leopard

I'm trying to upgrade to Snow Leopard, but since I replaced my hard drive last year, it was automatically formatted to Apple Partition Map, I'm not sure of the proper way to fix this.
I have Time Machine running with an external 500gb drive, the same size as my upgraded internal drive. What procedures should I use to safely back up ALL of the information currently on my computer, reformat the main drive, then restore all of my current information to the new style partition? I have 5-6000 photos, as well as 1500-2000 mp3 files I hate to lose. Should I back these up separately to a DVD or something first?
Any help, step by step, would be helpful, as I'm not very experienced with such matters.
Thanks......

ludwigvan66 wrote:
What procedures should I use to safely back up ALL of the information currently on my computer, reformat the main drive, then restore all of my current information to the new style partition?
The brute-force approach would be to buy an external disk drive and use use Carbon Copy Cloner (http://www.bombich.com/) or SuperDuper! (http://www.shirt-pocket.com/) to create a bootable "clone" of your disk. Then verify that you can boot from the "clone", reformat your internal drive, then use the same software as above to copy your files back to the internal drive.

[Help] "Oracle9i DBA Study Guide" needed

+---Oracle9i DBA Study Guide
| d32643-oracle9idba fundamentals 1－i.pdf
| d32644-oracle9idba fundamentals 1－ii.pdf
| D32714-Oracle9iDBA Fundamentals 2－i.pdf
| d32715-oracle9idba fundamentals 2－ii.pdf
| D33051 Introduction to oracle 9i_sql v1.pdf
| D33052 Introduction to oracle 9i_sql v2.pdf
| D33053 introduction to oracle 9i_sql v3.pdf
| D33513 O9i performance tuning v1.pdf
| D33520 O9i performance tuning v2.pdf

Is this what you're looking for?
OCP: Oracle9i Certification Kit (Bob Bryla, Joseph Johnson, Biju Thomas)
OCP Oracle9i DBA Certification Boxed Set (Jason S. Couchman, Charles Pack, Daniel K. Benjamin, Rama Velpuri, Sudheer Marisetti)

Ipod Mini Help - Need Idiot's Guide to Set Up

Help! I got an ipod mini for Xmas from my boyfriend. He loaded 500 songs onto my ipod from his ibook. However as we've split up I haven't really used it but I'm going travelling for a year (this weekend-nothing like being prepared...!) and would like to take it with me and set up play lists etc.
I haven't even connected my ipod to my laptop as I've heard that when you connect to it/itunes that yr ipod contents can be wiped if you are already registered with another PC/Mac. So basically I don't know what order I have do stuff so that I can get some tunes I like rather than listening to ex-boyf's taste in music.
Hope this makes sense - never posted on this before and am a bit of a technophobe.
Packard Bell Easy Note Lap Top Windows XP
Packard Bell Easy Note Lap Top Windows XP

Hi,
Welcome to Apple Discussions
I believe you want to manually sync your iPod. You might want to look at the following:
Knowledge Base Document #61148 on Managing songs manually on iPod
Knowledge Base Document #61675 on Using iPod with Multiple Computers
iPod 101
Jon

HELP: Need clear, simple guide to setting up two WAC120

I need a clear, simple guide to setting up two WAC120 Access Points.
I have purchased two WAC120 units.
I live in a 4 story home. I have put the...

I want to boost the WiFi signal in my house. I have a WN203 AP. I have found the manual on line but, can't seem to make sense out of it. Does anyone...

Whenever i try to go to the iTunes store it says the connections has timed out and will not let me proceed and i have try almost all the help in the support guides... any help?

I didn't know this is where you put the problem but the question is the title

ive got the same problem, my wont connect either it just loads half way then freezes at this -

Trouble shooting guide! Read this first!!!! rev 13-1-2004

(Revision 13-1-2004)
Hi there,
Follow everything on the list, even if it doesn't look like it would solve your problem, most problems are created somewhere else!
To give some examples:
CPU won't run FSB133....mostly powersupply or CPU-cooler.
Videocard won't load drivers....mostly powersupply.
Sound won't work.....mostly metal-standoff's.
Windows won't install, file read error.....mostly CPU-cooler, Bad-ram or powersupply.
That is why you need to go over the entire list and check all!
Before you start doing anything, remove the power and make sure that you have touched the metal case of your system. If you don't you could damage your system due to static discharge!
Thanks to Arioch and Dragon60 for comments on this.
There are several reasons why this happens.....to name the most commen:
CPU speeds
You have a Duron, that CPU is 100FSB!
You have a Athlon(XP) and it's showing the wrong speed, set the CPU-FSB to 133....
Or 166 when it's a FSB333 CPU....or 200 when it's a FSB400 CPU....
Some boards have a jumper to set it, other do it in the BIOS.
Check your manual for this.
Speeds must be:
Duron upto 1300MHz = 100MHz (=200DDR)
Duron from 1400MHz = 133MHz (=266DDR)
Athlon B type = 100MHz (=200DDR)
Athlon C type = 133MHz (=266DDR)
Athlon XP - C type = 133MHz (=266DDR)
Athlon XP - D type = 166MHz (=333DDR)
Athlon XP - E type = 200MHz (=400DDR)
Use this link to see if your motherboard actually supports your CPU.
The TBred CPU's (0.13) start from XP-1700 and up, but not all boards support this CPU and they either show on the D-LED all red or don't start at all!!
The K7T266pro2 is an exception, it can be made to support the TBred CPU's, on this link you find all the info on how to make it work.
Many reports have told us that FSB333 CPU's work on KT3-Ultra boards work just fine, but it's unsupported by MSI, we don't know why....
As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it.
How to recognise the CPU:
If you look on the dice, there are letters after the speed.
The last letter will tell you the FSB of the CPU.
B=100MHz (=200DDR)
C=133MHz (=266DDR)
D=166MHz (=333DDR)
E=200MHz (=400DDR)
To recognise a CPU quickly, checkout this link.
Thanks Mellops.
The MHz setting must match your setting in the BIOS for FSB value, as it translates to the correct FSB setting for the CPU.
The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
Detailed information on the code can be found in this AMD document. (Thanks Hans)
CPU Cooling
CPU cooler not made for your CPU, check if it can handle your CPU....
CPU cooler mounted wrong!, take it off and check it as it will fit 2 way's, but only 1 is the right one, examine very carefull!
The cooler has a lower part that needs to go over the bump (higher part) of the socket, if it's not over there it won't cool the entire dice and WILL give you trouble.
Also check if it's making contact with the entire dice of the CPU...
Make sure you regrease it again, the same grease/paste can't be used twice!
YOU MAY NEVER USE A THERMALPAD OR GREASE AGAIN! APPLY NEW EVERY TIME YOU TAKE THE COOLER OFF!!
top 2 show how not to do it
Used too much silver-grease! It will shorten the bridges on the CPU, clean it and use white-paste.
(Silver-paste is not recommended in any case!)
The latest AMD XP CPU's (XP-2200 and above) require a copperbased heatsink because the dice is smaller and generates far more heat per square cm then the "old" CPU's do.
How to check the cooler before taking it off.
There is a simple way to check the cooler without taking it off.
You do this by first checking your idle temp with PCAlert, it should be below 50-55C.
Then you download a client from www.distributed.net, let this client run for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
If it still goes up or the system crashes, there is a big chance you mounted the CPU-cooler wrong.
When you can't run this check, try with FSB100, if the system does run the check then, it could be well that the cooler is mounted wrong or your powersupply doesn't have enough power.
***** YOU CAN'T CHECK THE CPU COOLER ON TEMPS OR FAN RUNNING, IT MUST BE TAKEN OFF THE CPU!!! *****
Cleaning the CPU and Cooler - thanks to Dragon60 for his addition.
An additional comments about this is what you clean the CPU with in this situation. The best thing to use is isopropyl alcohol. If this is not available then metholated spirits would do.
Make sure you allow the CPU to dry properly before you put it back in. This also means DO NOT try and clean it whilst it is still in the socket as some of the cleaning fluid, grease and dirt may get underneath and short some pins.
Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may disolve some parts.
Thanks Dragon60.
If you don't understand what we are talking about on this cooler matter, then read this link: AMD CPU & Cooling guide
Powersupplies
Powersupply too little, most commen cheap 300W CPU's can't handle an XP-1700 or above, try a better one to be sure.
Make sure your powersupply has about 185W combined on the 3.3+5V and that the 3.3V has 20A or above.
That should be enough for most systems.
On the latest boards the 12V has become very important too, expecialy with TBred CPU's.
Make sure yours can give 18A or more on the 12V line too.
I have found that a lot of cheap 350W will fail with modern boards and TBred CPU's.
Allway's make sure you have a decend PSU, it never fails to spent a bit more on that part!
Borrow a bigger one from a friend if you are not sure....
More info about powersupplies: Click here.
And the second you must read: Click here.
Powersupplies with these type of numbers on them or higher should be fine:
3.3V - 28A or better
5V - 30A or better
12V - 18A or better
Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!!
Do NOT trust the 300W or 400W rating on them!!!
Q-Tec is about the worst of them all!!
Metalclips
Stand-off's left between the board and the case, take the board out and check for too many of those metal-clips, they can shorten circuits and cause al sorts of problems (most of the time audio problems)
RAM
Ram problems, don't try to run with PC100 (SDram boards) when you have a 133FSB CPU, get PC133 ram of decend quality.
In any case, don't use cheap quality ram (Crucial seems decend, but give's a lot of problems, I consider these cheap quality too :P ), replace the ram with another brand to see if it fixes it....
DDR ram speeds:
Duron upto 1300/Athlon-B =100FSB=PC-1600=DDR200
Duron from 1400 =133FSB=PC-2100=DDR266
Athlon-C/XP upto 2600 =133FSB=PC-2100=DDR266
Athlon XP D-type and above =166FSB=PC-2700=DDR333
Athlon XP E-type and above =200FSB=PC-3200=DDR400
Higher DDR speeds are only a must if you try to overclock, they have no speed gain if run at the correct speed. You may use faster ram on a slower system, the speeds given are what is needed minimum.
Perform RAM test tools, ie http://www.memtest.org if you suspect RAM is faulty, such as BSOD or data corruption. [added by Maesus]
Try your system allway's with 1 stick of ram, adding more sticks can give all the trouble too.
Some sticks just won't work in pair and a lot fail when you put 3 or more in the system.
When you want to use 3 sticks, make very sure you use the MSI tested ones, they are your best chance that they work without problems.
If still nothing, try to seat the ram in another slot, sometimes they work better in another slot.
Thanks boost
Or rise the Ram voltage a little, be carefull doing this!
Sometimes this works when you have a lot of ram in there.
BIOS
BIOS settings not right, clear the CMos and start with the default settings, if it works, try setting ONLY the FSB to 133 if needed, nothing more.....
And go further from there......
Clearing CMos
When you clear the CMos, make sure that all power is cut from the system.
This is done by takeing the wall-plug out or use the switch on the powersupply to turn it off.
On most boards, as far as I know all MSI boards, you must set the JBat1 to position 2-3 (clear position) for about 10 seconds, then set it back to 1-2 (keep data position)
After this your CMos should be cleared and you can turn the system back on.
In some rare cases it's needed to take the battery out too for a minute or so.
It can happen that the system will prompt you to set the BIOS again, go into the BIOS and set everything you need, then save the settings.
Thanks fguevara.
Harddisks
Harddisk is giving problems, most of the time with WD drive's, they are jumpered somewhat strange compared to others:
No jumper = Stand-Alone no other drive attached to the cable.
Jumper master = if you have a slave drive attached
Jumper slave = when it's slave to another drive
Harddisk is doing weird things:
Make sure you have connected the blue connector to the board, and don't let the other end of the cable unused, make sure there is a device connected to it.
The middle connector can be left into the air without problems if not needed.
IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
Click here for DFT
Other brand drives can have problems too, make sure they are ok, as harddisk failure can cause all sorts of problems.
Allway's be sure your harddisk is in tip-top shape, if not, replace it and try another to verify.
For more information read this: Click here.
To know what harddisks your motherboard support, use this link.
To enable harddisk over 137GB in Win2000 edit this registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
"EnableBigLba"=dword:00000001
The KT4 raid boards only support 1 harddisk on IDE3, the rest must be SATA drive's!!
Harddisk/power led not functioning - thanks to Tweetyoost
If your HD led or power led not work try to switch(wrong + or - side) the connectors on the motherboard.
leds will work only when + or - is correct
Thanks Tweetyoost.
Floppy drive's
If your floppy drive doesn't work or the led stay's on all the time.
Make sure the floppy is set correctly in the BIOS, as the BIOS doesn't autodetect a floppy drive.
Check the cable, make sure the twist in the cable is at the floppy-drive side.
If the light stay's on, flip the connector at the floppy-drive arround.
Sometimes it happens that even after all this, they still don't work, try with another drive from another brand.
Not able to enter the BIOS or lockup
When you try to enter the BIOS it won't go in there or
lockup, but your system is running fine.
This symtom can happen when your CPU-Cooler is giving spikes on the coolerwire.
Try with another brand of cooler to test if it solves it.
Keyboard and optical mouse lights stay on after power off[/U]
Some motherboards have a jumper called JKBV1, this jumper is located (mostly) near the keyboard connector, put it in the other position.
If your board doesn't have the jumper, try to find the following BIOS settings and turn them off:
resume on KBC
resume on PS/2
resume by alarm
USB ports not working[/U]
Check in the BIOS if the ports are enabled.
USB2.0 ports are supported in Win2000+SP3 and XP+SP1, just let the OS reinstall the ports and they should work.
Thanks Stygge
Replacing parts and the system won't boot after
It's never a good idea to replace stuff like CPU and ram without taking the board out of the case.
But if you still like to do so, please support the board, because if you don't you might bent the board a little and cause other components to make bad contact.
Allways support the board when you replace stuff, no matter what!
Also make sure your system can take the replacement, it could happen for example that your powersupply can't handle your changed videocard from GF2MX to GF4Ti4600.
Test all the parts in another system
Make sure that the new part is in good working order in the first place (in particular: videocard, CPU, memory): try it in another system, or have it demonstrated by the one you bought it from if possible.
Testing might also give you a clue on what is actually wrong in your own system.
Thanks HansH.
Checking the powersupply
Don't do this if you don't know what you are doing!
Disconnect the powersupply.
Orientate the 20pin Powerconnector with the clip up.
Locate pin 4 and pin 8 top row, mostly green and black wire.
Use a wire to short them (or better a 12V test lamp).
Now connect the power and the fan inside the powersupply should start spinning.
If it doesn't your powersupply maybe dead.
Thanks HansH.
KT4 users
Please read the Un-Official KT4 guide if you have CRC errors or strange crashes.
These can be BIOS problems.
In any case !!!Only flash if the system is stable!!!
Set default-settings and FSB100 to make it stable first!!!
Motherboards making a Siren-sound
If your board is making the sound of a firetruck, BEEP-BOOP-BEEP-BOOP...
Check the folowing:
1. CPU too hot
2. chassis intrusion was enabled in the BIOS
3. PSU is below min/max allowable value
Stutter in audio
Remove your antivirus software.
We have heard a few cases where the stuttering was created by badly behaving antivirus software.
Disable cpu halt command if it's in the BIOS (Thanks Pascal16)
Windows
Windows2000/XP won't run stable, try to disable APIC and install again....
Not all drivers/devices like the APIC.
Windows2000/XP won't install USB2.0, install the latest servicepak (SP3 Win2000 or SP1 WinXP).
Let Windows rediscover the USB ports, they should work now.
If you have driver or other problems and don't know what to do anymore but Windows does function without crashing, read this: Click here.
Audio [added by Maesus, 20/2/2003]
Can't stream AC3 via SPDIF to external DD decoder? try this ac3filter [info provided by Manfred ]
Lan not working 100MBit
You could try this patch, seems to work on some boards.
The download-link is at the bottom of this post.
I think I have about covered all most commen problems....
Check those first before you ask us, as it's not fun to type the same over and over again.... :(
Another good link for trouble shooting is here: Link
If you have more issues that can solve problems, please write your thing below......
I will insert your comments in this guide, with credits, offcourse 8)
!!I will delete any attempt for discussion or problem report below this message.....!!
Please report back, in another thread, if your problem was solved and how you did it, this will help others a great deal.
It's only ment to help people as a guide to where the problem can be, start a new thread if this guide didn't solve your problem and you need more help!
This thread is only for the experts to guide you into a solution :]

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

Lightroom encountered an error when reading from its preview cache. helping a friend..

Im not a lightroom user. even though I have some version 4. I use acdsee pro 6. but my friend has the 5.6 CC version but has a language issue so im trying to help me. basically will guide him over the phone.
he was editing a wedding, the computer crashed. he rebooted, lightroom came with the preview cache error. he rebooted again..same issue. he did a repair but to no avail. he tried installing an older version in parralel but no success.
what exactly does he need to do. im not a light room user. I use PS CS6 but not LR.
anybody can help to help him. I did read some posts and it noted about thumbnail previews and removing or erasing/renaming
1- where is this file located please?
2-are there many of these ? and how do I know which is the one he needs to choose?
thank you for your help.

See answer at Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

Oracle 9i: Help with loadjava jar files to call out web service from pl/sql

I'm trying to build a web service client using dbws_callout_utility.zip (version used for prio 10g database). I followed the articles in oracle site to loadjava jar files (soap.jar, dms.jar, ejb.jar, jssl-1_1.jar, mail.jar, servlet.jar) into Oracle DB 9i before invoke jpub to gen stub class and wrappers in oracle 9i but i have many errors such as ora-29534 and ora-29521. As consequence i could not invoke jpublisher to generate code.
Pls. help my with detail guide to overcome these errors, thanks in advance! My DB is Oracle 9.2.0.5

Dear,
I have read your article, it is useful for me. But I cannot Apply to my case. Please kindly help me. Thank you.
When running, the error occurs:
1:39:31 Execution failed: ORA-20000: soapenv:Server.userException - org.xml.sax.SAXParseException: Attribute name "password" associated with an element type "user" must be followed by the ' = ' character.
My webservice Url: http://abc.com.vn:81/axis/ABC_WS_TEST.jws?wsdl
I make PL/SQL (similiar as your example)
FUNCTION INVOKESENDMT
RETURN VARCHAR2
AS
l_request soap_api.t_request;
l_response soap_api.t_response;
l_return VARCHAR2(32767);
l_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_method VARCHAR2(32767);
l_soap_action VARCHAR2(32767);
l_result_name VARCHAR2(32767);
p_zipcode VARCHAR2(160);
BEGIN
--p_zipcode:='''TEST'' ; ''TEST'';''84912187098'';''84912187098'';''0'';''8118'';''1'';''000001'';''ThuNghiem'';''''';
p_zipcode:='TEST';
-- Set proxy details if no direct net connection.
--UTL_HTTP.set_proxy('myproxy:4480', NULL);
--UTL_HTTP.set_persistent_conn_support(TRUE);
-- Set proxy authentication if necessary.
--soap_api.set_proxy_authentication(p_username => 'TEST',
-- p_password => 'TEST');
l_url := 'http://abc.com.vn:81/axis/ABC_WS_TEST.jws';
l_namespace := 'xmlns="' || l_url || '"';
l_method := 'sendMT';
l_soap_action := l_url || '#sendMT';
l_result_name := 'sendMTResponse';
l_request := soap_api.new_request(p_method => l_method,
p_namespace => l_namespace);
soap_api.add_parameter(p_request => l_request,
p_name => 'user password sender receiver chargedflag servicenumber messagetype messageid textcontent binarycontent',
p_type => 'xsd:string',
p_value => p_zipcode);
l_response := soap_api.invoke(p_request => l_request,
p_url => l_url,
p_action => l_soap_action);
l_return := soap_api.get_return_value(p_response => l_response,
p_name => l_result_name,
p_namespace => l_namespace);
RETURN l_return;
END;

Help in opensparcT2 Dv-guide

Similar Messages

Maybe you are looking for