Help in setting up internet connection with AOL

I just purchased a MacBook this week (already have an iMac). I have phone line internet service with AOL as my provider. I purchased the modem from Apple to connect to my phone line. I have tried to use the SetUp Asst. to connect but I am not very computer literate and can't seem to get set up. I need very basic directions. Also, how do I use wifi with the MacBook? I have never used it before - I don't know how to configure it or get it started either. Any help would be tremendously appreciated. Sorry to be so illiterate!
Sunny

Welcome To Discussions Sunny!
At what point in the setup are you?
Do you have the AOL application installed on the MacBook?
Do you have an existing AOL account?
Do you have the External Modem connected to the MacBook, and also to the phone jack in the wall?
ali b

Similar Messages

Setting up internet connection with a cell phone as modem

Well, I guess you can figure out what this is all about from the title..
Basically, I have a cell phone (Nokia N95 8GB) which I currently use for my internet connection on Windows XP, connected via USB cable. The question is how I would go about setting it up with Arch.. I really have no idea where to start. I have browsed the Wiki and been Googling for ages without much luck. I would therefore be very grateful if someone would point me in the right direction.
My ISP is Telenor, I live in Norway. I already have the details required for a working connection on Windows, would these be very different on Linux? Or, in other words, do I need additional information?
Do I have to use a "dialer" - like wvdial? If so, where do I get that one without a working internet connection?
Also, I have Arch installed on my US pen drive. Is there a recommended way to make my network settings portable between multiple computers, can I e.g. have multiple profiles?

I used to do this with a Nokia N70, and when I plugged in the USB able, the cdc-acm module would autoload and create a /dev/ttyACM0 interface that could be used by ppp. ppp is on the install iso, btw.
netcfg can handle multiple profiles - I haven't used it with dial-up myself though.

Sharing internet connection with powerbook and nintendo wii through airport

i have been trying to share my internet connection from my imac to my powerbook and nintendo wii. i've been unable to accomplish neither. i've opened the sharing preferences, chosen "share your connection from built in ethernet" which is how my imac is connected to the internet, and then chosen "to computers using airport". if i then set my airport options to automatic channel, encryption using 40 bit wep and set a 5 character password as it says if you "plan to share your internet connection with non-apple computers", (and then turn internet sharing on) shouldn't i be able to connect either/both my powerbook and my nintendo wii? or is it necessary to have some other piece of hardware or go through some other steps?
thanks in advance for any help.

I got a macbook for college and I had the same problem with connecting my Wii to the macbook's connection. But lo and behold, the internet's a wonderful place! I tried this out (http://www.macosxhints.com/article.php?story=20070514152251515) and it worked! I'm not sure about the powerbook bit though, sorry. Hope it works for you too.

Lynksys E900 Wireless-N300 Router - Help needed to share internet connection from PC to home network

Hi, I'm hoping someone can help me out with a problem I have:
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?
To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router, although if anyone has any ideas how to do this I'd love to hear!
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE? Any help or suggestions would be greatly appreciated! PS: both PC's are running on Windows 8

I have Cisco Linksys E900 router. I want to make my home Wi-Fi zone. But I don’t have Static IP. One more thing is that Service provider have web page Authentication. I have username and pass.
I am able to make SSID and security for my WI-FI LAN. I can use internet on one device. If I tried from second device again it’s asking me for username and password. While login it’s showing your first session in not logout. (Means I have to logout from 1st device and have to login on 2nd device.)
Is there any option that I can Use my all devices at same time?

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Using time capsule to share internet connection with a pc via ethernet

Hi,
I've recently acquired a time capsule and was wondering if i could use it to share a wireless internet connection via ethernet to my non-wireless (windows 7) pc?
My current situation is that i have a wireless modem/router that shares my internet connection wirelessly with my mac mini.
I have a pc without a wireless card that i want to connect to the wireless network so i was wondering if it was possible to attach the pc and the time capsule with an ethernet cable, then connect the time capsule to the wireless network and share the internet connection with the pc.
Can anyone tell me if this is possible, and if so how?
Thanks

Welcome to the discussion area!
IF...your wireless network is now being created by another Apple "n" router like an AirPort Extreme, AirPort Express or Time Capsule, it would be possible to do what you want to do.
But the Time Capsule would not be compatible for what you want if your wireless is created by another manufacturer's router. The Time Capsule could "join" this wireless network so that backups would occur over wireless. However, when the Time Capsule is configured this way, the ethernet ports on the device are not active, so this would not help with the ethernet connection that your computer needs.
A new AirPort Express 802.11n would do what you want. It has the capability of joining virtually any wireless network and the ethernet port can be enabled using the ProxySTA feature, so it would work for your purpose.

Sharing internet connection with a PC

Hi, I have a macbook with the latest OS X. I want to know if it is possible to share my PC's internet connection with my laptop, either through wifi, bluetooth, or firewire. I am running XP on the PC. I will not have a wireless network up, and I would like to have internet on both my mac and my pc. Is there a device that i can hook into my PC to broadcast a wifi network. It doesnt have to have a large range, I'll be using my laptop close to my desktop.
Macbook Mac OS X (10.4.7)

Really cool feature alert. Under System Preferences-->Sharing you can have your Mac share to any computer connected via Wi-fi, Firewire, or Ethernet. Whichever adapters are not used for the Internet connection are available.
It saved me lots of grief setting up some stubborn Windows boxen that only loaded the firewire driver as the OS was setup.

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

I want to share internet connection with external IP

Hello, guys.
I am running 2010 2.4GHz Mac Mini with 2GB RAM. My inernet cable goes directly to my Mac with no router whatsoever. Here's my problem:
I'm trying to set up a game server (Minecraft). So I need port 25565 to be opened. I managed to do that on my Mac and it's working perfectly. But now I want to host that server on my laptop (running Windows 7).
When I share my internet connection with that laptop and run the server and then check the port using canyouseeme.org I get message that that port is closed, connection refused.
After few hours of no results (adding Firewall rules, trying to port forward (before I see that port forwading can be done only using a router)) I call up my ISP and the guy tells me that when my Mac shares the internet connection, my laptop's IP is internal thus making the server that it's running invisible to others. My question is:
How do I share the Mac's connection via WiFi so that the laptop gets external (visible to the public) IP?
I really hope I made my problem clear.
Thanks.

Get a router.
The internet is a dangerous place for a computer without a properly configured firewall.
Also, when you get said router, look at the Logmein Hamachi VPN. It provides a point to point vpn connection which should resolve your minecraft issues.

How to share internet connection with KDE networkmanager applet

I mainly use wireless around my house and like to use one computer to share it's wireless to another when installing Arch, until I can get KDE and networkmanager installed so I can easily connect to the wireless. I've always been able to easily share internet connections with Ubuntu, but when I try it with Arch, with Gnome OR KDE (and their respective applets), It just doesn't work.
Is there some library or backend I need to install to make ICS work?
Thanks!
Last edited by MetaMan (2011-09-10 22:12:26)

If this helps at all, here is what I am currently trying: I open up the network settings KDE Control Module, select "Wired", select the device (eth0) and click edit, and under the "IPv4 Address" tab selecting "Shared" from the "Method" drop-down.
Also, to make it clearer, I am trying to share wlan0(on device 1) through eth0 to eth0 on device 2. Also, device 2 is running the Arch setup and I am telling it to connect to eth0 via DHCP after I select the remote mirror to use. I have managed to do this before when device 1 ran Ubuntu.
I've searched Google, the forums, read the wiki pages for KDE and networkmanager, and can't seem to find a mention of internet connection sharing (pertaining to my usage case; the forums have some posts of people trying to use their computer to broadcast eth0, I'm trying to do the opposite) anywhere on them. In fact, I'll gladly write the section myself if I figure this problem out.
Hope this extra information helps!

Sharing an internet connection with Airport express and Time Capsule

Hi, I have been happily using a cable modem and a Time Capsule for my internet connection and wireless network. We recently added solar panels to our roof and the system needs to be connected to the internet so it can be monitored remotely. Calling Comcast is an exercise in frustration, and the solar people don't seem to know exactly how to do it, so I'm trying this.
We bought an Airport Express, thinking if it is connected with an ethernet cable to the solar system, it could somehow share the internet connection with the Time Capsule, or they could talk to each other. When I plug in the Airport Express, the only set-up option seems to be to set up a new network, which I don't think I want to do. Can anyone tell me how to set this up? Thank you!

Hi, Under Water.
You should configure the Express to "Join a wireless network" or to "Extend a wireless network". (Either one will work.)
Connect your computer to your Express via Ethernet and open AirPort Utility. Press "Manual Setup" and authenticate if necessary.
Go to the "Base Station" tab. Give the Express a name and password.
Go to the "Wireless" tab. Set the Wireless mode to "Join a wireless network" or "Extend a wireless network." Enter the name of the wireless network created by your Time Capsule (or select it from the list). Check the box that says "Allow Ethernet clients" (if you're joining) or "Allow Wireless Clients" (if you're extending).
Provide the appropriate security mode and password for the Time Capsule's network.
Press "Update" and allow your Express to restart.
Then you can plug the solar system into the Express's Ethernet port.

Apple Help engine erroneously reports internet connection missing

I was using the help for TextWrangler, which is implemented in the Apple Help system. Sometimes, inconsistently, it fails to bring up a help page, and reports
Internet connection required
The help topic you’re opening requires an Internet connection. Choose Apple > System Preferences, and then click Network to check your network settings and, if necessary, connect to the Internet.
Of course my internet connection is just fine. I did a google search on that error message and found a suggestion that other people are experiencing this same error in Help in other applications and that Apple has been notified of the problem, so I thought I'd check here if anyone knows anything about this.
Thanks!
-dave

Turn on 64-BIT WEP encryption on your router. Pick a 10 digit password for key 1. Turn on Wireless with SSID broadcast on. Pick a name for your network other than "LINKSYS"
On the Mac turn on wireless (icon next to the speaker, upper right)
Select the network you just made. Type in the key.
and you're on

Can I share my iMac's internet connection with my Touch?

I have a DSL modem and do not have a wifi network setup. Using Lion, can I still share my iMac's internet connection with my Touch?
If so can you give me step by steps? Will this be something that I can turn off and on without interfering with my regular ethernet internet connection?
Thanks. Asking this for a friend who is scared that she will somehow mess up her existing internet connection if she tries to set this up. She
called AppleCare to get them to walk her through this and they denied any knowledge of the ability to do this. Huh?

OK. Remember this is just a form of texting, so it's not easy to discern whether a question is explicit or rhetorical. Sometimes you have to give the reader a clue.

Sharing internet connection with a Windows laptop

I'm using an older, 802.11b Airport (I think it is Snow) and have no problem connecting my MacBook Pro or my iMac. I've just bought a Gateway laptop running Windows Vista. I cannot connect to the internet on the new machine. I've turned off WEP through Airport Admin Utility. The Vista machine shows as connecting to the network but only with Local Access and is not able to connect to the internet. I took it to a local public hotspot and had no trouble connecting. What do I need to do to be able to share my internet connection with the new machine? Thanks for any help.
Michael

It's working. The problem was that windows left the field "gateway" on the wireless device properties blank. I just had to put 192.168.0.1 there to get it to work. Thanks for your help, tomk.

My 2007 mac pro has a slow internet connection with lion

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Help in setting up internet connection with AOL

Similar Messages

Maybe you are looking for