Help in understanding using Visual Communicator 3

Up to know I run live streaming through our Steaming server using FMS and Flash Media Live Encoder as we only needed one camera for live video feeds.
We are looking at the ability now to use 2 live cameras and also the ability to snap in pre recorded video during live feeds and also provide lower third titles.
I am looking at:
Adobe Visual Communicator 3
Wirecast 4
CutFour
All of these provide the possible live switching I need.
I'm at the moment looking at the Trial version of Visual communicator and I am struggling getting my head around a few things.
I can hook up 2 -3 Sony A1 HD cameras in SD no problem and running it though FMS is fine. During test streams clicking on the cameras using the mini switcher is straight forward.
howevr I am struggling to work out how to do the following:
Add prerecorded video clips to Camera 3? ( in the Setup Tab it says " No Camera found - please connect a camera or replace with Photo or video Clip) How do I replace with a Video Clip?
How do I add premade titles, so that during the live feed I can put lower third titles in?
Finally, How do Provide an intro looping video to play before the live feed starts?
Any instructions would be appreciated

I have decided to ditch Visual Communicator as an option.
Apart from the poor support, I have tested the Trial version and it would not make sense to use the application in its cirrent form.
In a ten minute period using 2 cameras as a test, the application froze and crashed four times. Not acceptable as reliability is crucial.
The test was done on a Windows 7 64 bit machine with 4 physical Xeon Quad core 3GHZ processors and 32 GB RAM with a 2GB Graphics card, so performance was not the issue.
the application is just not stable.
I am getting better support and results from both Wirecast 4 and Cutfour.

Similar Messages

Schools Using Visual Communicator

For those considering educational uses of Visual Communicator, remember you can create much more than just school newscasts. Hundreds of educators are using it for classroom projects as well, in various curricular areas like Foreign Language, Social Studies, Science, Technology, etc.
Here is a perfect example of a Social Studies unit that focused on the Presidential inauguration in February 2009:
http://blogs.schooltube.com/robz/2009/01/video-messages-to-president-obama.html
Learn more at our sites for VC users:
http://www.SchoolTVmadeEasy.com
http://www.TeachMeVC.com
http://www.AskMrZshow.com
http://www.AskMrZblog.com

I have decided to ditch Visual Communicator as an option.
Apart from the poor support, I have tested the Trial version and it would not make sense to use the application in its cirrent form.
In a ten minute period using 2 cameras as a test, the application froze and crashed four times. Not acceptable as reliability is crucial.
The test was done on a Windows 7 64 bit machine with 4 physical Xeon Quad core 3GHZ processors and 32 GB RAM with a 2GB Graphics card, so performance was not the issue.
the application is just not stable.
I am getting better support and results from both Wirecast 4 and Cutfour.

Help in understanding use of Rollover and rolloffs for text

I have a word in a sentence called "Outlines". When the user puts the mouse over it, I would like text to appear that will define what "Outlines'' means. How do I do this in DW MX2004.
I would also like to use the same method for a linked word as well.
Any help would be appreciated.
Dreamweaver Newbie

I have a word in a sentence called "Outlines". When the user puts the mouse over it, I would like text to appear that will define what "Outlines'' means. How do I do this in DW MX2004.
Use the HTML Title attribute in code view.
<title="definition goes here">Outlines</title>
I would also like to use the same method for a linked word as well.
<a href="somelink.html" alt="outline" title="outlines are literary frameworks">Outlines</a>
In another scenario, you may wish to use the <acronym> tag which gives greater meaning to abbreviated terms such as NASA:
<acronym title="National Aeronautics and Space Administration">NASA</acronym>
See also logical HTML tags:
http://www.htmlcodetutorial.com/logical.html
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Help understand Visual Communicator Live Streaming

Up to know I run live streaming through our Steaming server using FMS and Flash Media Live Encoder as we only needed one camera for live video feeds.
We are looking at the ability now to use 2 live cameras and also the ability to snap in pre recorded video during live feeds and also provide lower third titles.
I am looking at:
Adobe Visual Communicator 3
Wirecast 4
CutFour
All of these provide the possible live switching I need.
I'm at the moment looking at the Trial version of Visual communicator and I am struggling getting my head around a few things.
I can hook up 2 -3 Sony A1 HD cameras in SD no problem and running it though FMS is fine. During test streams clicking on the cameras using the mini switcher is straight forward.
howevr I am struggling to work out how to do the following:
Add prerecorded video clips to Camera 3? ( in the Setup Tab it says " No Camera found - please connect a camera or replace with Photo or video Clip) How do I replace with a Video Clip?
How do I add premade titles, so that during the live feed I can put lower third titles in?
Finally, How do Provide an intro looping video to play before the live feed starts?
Any instructions would be appreciated

Hi there
The forums are user-to-user. The older incarnation of the forums used to have a disclaimer on each page. Now there is one that appears at:
http://forums.adobe.com/index.jspa
If you want to bring something to Adobe's attention, you need to use the proper channel. That channel is the Wish Form/Bug Reporting form.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can you help me understand the use of the word POSITION in TR and CFM?

Hi,
I am trying to have a view of typical BI reports in TR and TM/CFM so through my research I came to the following link:.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/08193c38f98e1ce10000000a11405a/frameset.htm
My problem on this link and other postings on this site seem to be the same. Can you help me understand the use of the word POSITIONS in these context:
1. Our client has asked for financial transaction reports in BW, such as position of Borrowings, Investments and Hedge Operations (TM data).
2. I have a requirement on, some reports related to Money Market (Fixed Term Deposits, Deposits at Notice) something on FSCM-Treasury and Risk Manager. These reports will be similar to that of Loans, i.e. Position statement, flow statement, etc.
3. The set of position values for a single position or a limited amount of positions can be reported by transactions TPM12 and TPM13 in R3.
4. 0CFM_C10 (Financial Positions Cube)
Do you have some simple report outputs to help clarify how the word POSITION is used in such environments?
Thanks
Edited by: AmandaBaah on Feb 15, 2010 4:39 PM

If I future buy 10 shares in company at £1 per share - at the end of the day my potential value is £10
The next day the shares drop tp £0.9 per share - I have a negative position - my shares are only worth £9
I haven;t bought them yet - but I have a negative position - ie if things stayed as they are - I am going to realise (ie end up with) a loss
Now you can use this for loans and foreign exchange banks as well...

HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this. Thanks.

I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this.

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

Anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, less cheaper

anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, with add costs?

There are two versions of the current iPad, the WiFi only (which will work anywhere in the world, but only connect to WiFi networks) and the 3G/4G model. The latter will connect to 3G networks worldwide, as I understand it, but the only 4G networks it can connect to are in the US and Canada.

Need help creating full battery alert using visual basic script

Hi,
I have been searching for resources, programs and code that will create an alert for me to unplug my charger when my laptop
battery is charged to full (or almost full).
The only problem with this code is that
Line 13: iRemaining (or RemainingCapacity called from BatteryStatus returns a 0 (might be a floating point which I can't figure out why). I even checked the microsoft documentation and its supposed to be a percentage.
I want to get either the current percentage of the battery or the total Fullchargedcapacity and the EstimatedRemainingCapacity to find the % of battery level.
Essentially what I am asking is how can I return the battery % using visual basic script.
Help!
The Code:
1 set oLocator = CreateObject("WbemScripting.SWbemLocator")
2 set oServices = oLocator.ConnectServer(".","root\wmi")
3 set oResults = oServices.ExecQuery("select * from batteryfullchargedcapacity")
4 for each oResult in oResults iFull = oResult.FullChargedCapacity
5 next
6
7 while (1)
8 set oResults = oServices.ExecQuery("select * from batterystatus")
9 for each oResult in oResults
10 iRemaining = oResult.RemainingCapacity
12 bCharging = oResult.Charging
12 next
13 iPercent = ((iRemaining / iFull) * 100) mod 100
14 if bCharging and (iPercent > 95) Then msgbox "Battery is at " & iPercent "%",vbInformation,"Battery monitor"
15 wscript.sleep 30000 ' (30 seconds)
16 wend

14 if bCharging and (iPercent > 95) Then msgbox "Battery is at " & iPercent "%",vbInformation,"Battery monitor"
On my Windows 7 machine your script returns the desired percentage (after adding the missing "&" to the right of "iPercent" in Line 14).

My computer crashed before i was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my software again. I have several projects that I cannot access. Please help!

My computer crashed before I was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my program again. I have projects that I cannot access. Please help!

I wish I could help, but I am in a similar situation.
I need to deactivate it because we are getting rid of the computer it is on and are buying a new one. When I go to Help there is no Deactivate option. The only options are: "Help", "Hide Coach", "Tip of the Day", "Adobe Website", "Technical Support Website", "Frequently Asked Questions", "Check for Updates", "Register", "Download e-License..." (Greyed out), "Return e-License..." (Greyed out) and "About Adobe Visual Communicator 3". I spoke with support through chat and they said my product was no longer supported.
Patrick

Can anyone help i want to call java class using visual basic

I want to call java class using visual basic and send some arguments to the main class

Hi,
I don't know VB, but you can surely launch a command line like :
javaw.exe mypackage.MyMainClass myArgument1
Regards

Help Downloading Visual Communicator 3

I am searching for a download link to an archived Visual Communicator 3 trial software.
Thank you for your time and consideration!

Adobe - Visual Communicator 3

How to manage a connection with powershell using visual studio with C#

Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..

Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Question about creating association between Sharepoint BDC entities using Visual Studio 2010

I am following this tutorial:
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/08/02/walkthrough-of-creating-association-between-sharepoint-bdc-entities-using-visual-studio-2010.aspx
I am getting the following error:
There is an error in the TypeDescriptors of Parameters on Method with Name 'CustomerToOrder' on Entity (External Content Type) with Name 'Customer' in Namespace 'BdcAssociationSample.BdcModel1'. The TypeDescriptors incompletely define where the Foreign
Identifiers of Entity 'Order' in Namespace 'BdcAssociationSample.BdcModel1' are to be read. That Entity expects exactly '1' Identifiers, but only '0' TypeDescriptors with the correct Association were found from which to read them.
I have viewed the following:
http://lightningtools.com/business_connectivity_services/the-typedescriptors-incompletely-define-where-the-identifiers-of-entity-x-are-to-be-readbcs-error/
after reading that article, I am still not sure what setting I am missing. Does anyone have the full working source code from the msdn article linked above?

Hi,
According to your post, my understanding is that you got the symbols not loaded error.
First try rebuilding your project by right mouse click the project > Rebuild If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
select [Properties]
select the [Build] tab
make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;
Hope that works for you! (step 6 generates the .pdb files, these are the debugging symbols)
What’s more, you can clean & re-compile the code, then install the respective dlls one more time to GAC (just remove them before adding to GAC again), do an IISReset to check whether it works.
More reference:
http://stackoverflow.com/questions/2155930/fixing-the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-fo
http://stackoverflow.com/questions/2301216/the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-for-this-d
http://geekswithblogs.net/dbutscher/archive/2007/06/26/113472.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to use Visual Studio IDE in IAR compiler?

Hi
I want to use visual studio IDE in IAR like external editor. but I do not know how do that?

Hi,
Thank you for posting in MSDN forum.
As you said the IAR, it seems that it is a third-party tool and we are not support it. So I suggest you can post this issue directly to the IAR official website:
https://www.iar.com/Support/technical-support/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create smart device application and dialog control using Visual C++ (Visual Studio 2005)

Hai all,
Good day. I am new to Visual C++. I tried and done some simple programs and dialog based programs in MFC application using Visual C++. But when i am trying to do
VC++ smart device win32 smart device project application project, not getting how to add event handler function for button. I tried serial communication in smart device application. i have inserted dialog and in that
no event handler. Can you please guide me to make a project for embedded board in VC++ smart device application.
Thanks & Regards Sasi ................. Go Green

Hi kvg,
Thanks for posting in MSDN forum.
From your post, it seem that this issue is better ask to the
Visual Studio Smart Device Development - Native C++ Project forum. I will move your thread to that forum for a better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help in understanding using Visual Communicator 3

Similar Messages

Maybe you are looking for